Coltelleria ed illuminazione

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Micarta
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Origin: Withdrawn from a private individual, previously purchased
* Conditions: in like-new condition
* Available on the market: No longer available
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: /
* Sheath: /
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: handcrafted blade and handle

Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: titanium folders with handle in micarta
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 213mm.
Closed thickness: 17mm.
Balance: -
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.



The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.

The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.



Intended Use: Sporting/Collection

Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydex

Intended use: Machete

Blade: carbon steel 1095 56 / 58HRC
Country of production: USA
Finishing: Teflonatura
Handle: GFN-PA66 polymer
Blade length: 359mm.
Blade thickness: 5mm.
Total length: 498mm.
Balancing: advanced
Weight: 589g.
Sheath: cordura, with vertical belt attachments

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Purpose of use: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Titanium with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 146g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: carbon fiber with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 94g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Purpose: sport / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 102g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio Silvestrelli

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: -
Blade Length: 98mm.
Blade thickness: 3.1mm.
Total length: 200mm.
Balance: advanced, 1 cm from the lower guard branch
Weight: 68g.
Sheath: ABS, neck, compatible M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Note: -

Purpose of use: Outdoor / Utility

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Satin
Handle: Zytel interchangeable in Blue Reptile or Purple Dolla Holla
Blade Length: 116mm.
Blade thickness: 4.8mm.
Overall length: 228mm.
Balance: backward, 1 cm from the lower guard branch
Weight: 181g.
Sheath: in leather
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Mike Snody - Schmuckatelli Coat Powder Coat - Coordinated Paracord

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse Jarosz

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: artisan blade and handle - industrial folders
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Raw
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 214mm.
Thick when closed: -mm.
Balancing: -
Weight: 182g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: Custom Edition unique piece

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 109mm.
Blade thickness: 5mm.
Closed length: 145mm.
Total length: 250mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Blade: AUS-8 HRC 57/58 stainless steel

Handle: Zytel
Length Blade: 180 mm.
Thickness Blade: 5 mm.
Total length: 310 mm.
Weight: 292 g.
Fodero: Kydex

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Purpose of use: Collection / Sportsman

Type of production: Sprint Run, Industrial, Open Number
Country of production: Prato - Italy
Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
Blade treatment: chemical detection
Handle: Anodized aluminum anticorodal
Blade Length: 70mm.
Blade thickness: 2.5mm.
Closed length: 99mm.
Total Length: 168mm.
Closure thickness: 11mm.
Weight: 84g.
Opening: ambidextrous opening pin
Washers: in fiberglass
Closure: Liner Lock
Clip: stainless steel, deep pocket, removable and reversible
Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

ABOUT THE STEEL

More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.

Purpose of use: Collection / Sportsman

Type of production: Sprint Run, Industrial, Open Number
Country of production: Prato - Italy
Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
Blade treatment: chemical detection
Handle: Anodized aluminum anticorodal
Blade Length: 70mm.
Blade thickness: 2.5mm.
Closed length: 99mm.
Total Length: 168mm.
Closure thickness: 11mm.
Weight: 84g.
Opening: ambidextrous opening pin
Washers: in fiberglass
Closure: Liner Lock
Clip: stainless steel, deep pocket, removable and reversible
Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

ABOUT THE STEEL

More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade treatment: MIL-C-13924 grinding
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 146g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade treatment: MIL-C-13924 grinding
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 140g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 146g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 140g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.