fighting swords
-
Museum Replicas Windlass - Complete armor of Augusta - 300508 - 205 cm - handcrafted
Founded in 15 BC during the reign of Emperor Augustus, Augusta competed with other German cities for the title of the oldest city in Germany. The old part of the historic center is considered the third largest in Germany, after Hamburg and Cologne.
The imperial city of Augsburg was renowned for its armor makers, which included the Helmschmied family and the master gunsmith Lorenz. The Helmschmied of Augsburg, Germany, were one of the most important late medieval European families of armorari / gunsmiths. Their name, sometimes also spelled Helmschmid, translates to "blacksmith helmet". The most important members of the family were Lorenz Helmschmied (active in 1467, died in 1515), Kolman Helmschmied (1471-1532) and Desiderio Helmschmied (1513-1579)
This armor is reconstructed on a model of the sixteenth century, manufactured by this illustrious foundry. Although it is made not to be worn, it retains all the aesthetic beauty and characteristics of full armor.
Handcrafted from 18 gauge mild steel and crafted by the artisans at Windlass Steelcrafts, this armor comes with a museum quality heavy wood pedestal base, decorative waist skirt, and wooden inner shape.
The helmet can accept up to three decorative plumes (sold separately).
Perfect for decorating a tavern, a living room, a business
Measurements:
Total height: 205 cm
Armor height: 182 cm
Base length: 55 cm
Base width: 55 cm
Base height: 23 cm
Weight: about 50 kg300508Special Price €942.62 Regular Price €1,147.54Only 2 leftOnly 2 left
-
Museum Replicas Windlass - Accolade Dagger of the Knights Templar 404335 - craft dagger
This extraordinary medieval dagger is the ideal companion for the Accolade sword.
The carbon steel blade has stamped the seal of the Knights Templar, while the knob has an inlaid cross.
Beautiful leather sheath.
Blade: carbon steel
Handle: brown leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather
Blade length: 260mm.
Handle length: 100mm.
Total length: 420mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 565g.
Weight with sheath: 713g.404335€139.34Only 1 leftOnly 1 left -
Museum Replicas Windlass - Centurion Gladius 501430 - Gladio - historical sword
Faithful reproduction of the Roman sword produced by Windlass
Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment501430€245.08Only 1 leftOnly 1 leftOut of stock -
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910€49.18Only 2 leftOnly 2 left -
Museum Replicas Windlass - Hoplite sword 500734 - handcrafted sword
Reproduction of the xiphos sword, used one-handed in ancient Greece often as a secondary weapon after the dory spear.
The blade typically measured between 40 and 60 cm and due to its leaf shape was suitable for both cutting and point attacks. The handle was simple, usually made of wood or bone, and had a crossbar to protect the hand.
It was mainly used as a secondary weapon by the hoplites, the heavily armed infantry soldiers of ancient Greece. Their main weapon was the dory, a long spear, but in close combat or when the spear broke, the xiphos became a lethal weapon for defence and short-range attacks.
In addition to its military role, the xiphos was also used for hunting and personal defence. It was a popular weapon among Greek citizens, both men and women, and was often carried as a sign of social status.
Blade: high carbon steel
Handle: black leather
Pommel: carbon steel
Guard: carbon steel
Scabbard: wood and brown leather, with metal fittings
Blade Length: 55.2cm.
Total Length: 72cm.
Blade thickness: 4mm.
Weight: 950g.
Weight with scabbard: 1,269g.
Balance: forward, about 9cm from the guard500734€172.13Only 1 leftOnly 1 left -
Museum Replicas Windlass - Braveheart - The Sword of William Wallace - movie props
Reproduction, made by Windlass, of the William Wallace's sword, used by Mel Gibson in the BraveHeart movie.
Total length: 154.5 cm
Blade length: 120 cm - NOT WRENCHED
Steel: High carbon content (it is recommended to periodically maintain oil to avoid oxidation)
Blade thickness: 4.4 mm
Weight: 2.98 kgThe handle (25.5 cm) and the first part of the blade are covered in leather.
501421€303.28Only 1 leftOnly 1 left -
Museum Replicas Windlass - Black sword - 501176 - Handcrafted Sword
"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "
The Blacksword fantasy sword features a burnished tempered carbon steel blade.
The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp501176€213.11Out of stock -
Museum Replicas Windlass - Leif Erikson Sword - 501651 - Viking sword
Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.
High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.
Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp501651€311.48Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Sword of Robert the Bruce - 501495 - historical sword
Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.Sword characteristics:
- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch501495€372.95Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806€110.66Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Brass Two Hand Battle Sword 501010 - battle ready
After many requests, they’re here! We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat. Each blade is built to withstand a lot of use by reenactors or stage performers. Forged of high carbon steel that’s fully tempered. The edges and points are 3/16″ thick and rounded over for better nick resistance. These are crafted just like our regular swords – medieval swords have peened steel and brass parts, and stout wood grips covered with leather; rapiers have very tough, wire wrapped cast grips and threaded tang ends. All come with scabbards. Use at your own risk. Use proper safety precautions at all times. Two Hand Battle Swords-Overall 481/2″. Blade 381/2″ long, 21/8″ wide. Wt: 4 lbs., 4 oz.501010€163.11Only 0 leftOnly 0 leftOut of stock -
Windlass - Italian Arming Dagger 403599 - craft dagger
Reproduction of an Italian dagger of the 14th / 15th century.
The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.
Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.
Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.403599€98.36Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Medici Renaissance Dagger 403721 - craft dagger
Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.
The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.
Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.403721€106.56Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Damascus Viking Sword 500262 - Viking sword
Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.
Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -500262€323.77Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Viking Sword 501472 - sword
Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -501472€286.89Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - The Accolade Knight Templar sword 50235
Non Nobis, Domine, Non Nobis, Sed Nomini Tuo Da Glorium
These iconic words engraved on the blade define this historic sword replica. The creed of the Knights Templar - Nothing for us, Lord, nothing for us but for the glory of thy name - marked their illustrious and sometimes infamous 200 year military influence.
This magnificent sword named The Accolade would have been a sword worthy of the Grand Master to knight a loyal member into this holy order. The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability.
The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonomous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap. The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.- Overall length: 101,5cm
- Blade length: 82cm
- Width of the blade: 5.8 cm
- Weight: 1640 gr
- Blanciatura: 13cm from the guard branch
- Accessories: scabbard and leather belt502356€356.56Only 0 leftOnly 0 left -
Museum Replicas Windlass - Battle Sword in a hand 501000 - battle ready
- Battle Sword in a hand 501000 - battle ready
Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch501000€155.74Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.
Each blade is built to withstand a lot of use by reenactors or stage performers.
Full tang sword forged of high carbon steel 1095, fully tempered.
The edges and points are 3/16" thick and rounded over for better nick resistance.
Wood grips covered with leather and other authentic materials.
All come with scabbards.
Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready
Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch501002€159.84Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Gladiator - Tigris Axe 880011
Museum Replicas Windlass - Gladiator - Tigris Axe 880011
From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.
Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.Weight: 2014g.
wooden display support© 2010 DW Studios LLC. All Rights Reserved.
880011€188.52Out of stock -
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Guard and pommel are made of steel.
Sheath, including the sword, a leather belt with.
- Overall length: 103cm
- Length of the blade: 86,5cm
- Blade width: 4.8 cm
- Weight: 1260 gr
501226€262.30Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Museum Replicas Windlass - Sword of Tancred - Craft Sword
Characteristics:
The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr501423€221.31Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - The Eagle - Sword of Marcus Aquila - Gladio - products from films
Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.
Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios888005€250.00Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft
Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft
Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather100342€118.85Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Spada della Terza Crociata
La Terza Crociata senza dubbio la pi famosa delle spedizioni in Terra Santa.
Infatti insanguin le terre d'Oltremare dal 1187 al 1192 e sanc la pi violenta collisione tra la guerra santa dei cristiani e la jihad dei musulmani. Tra epiche battaglie e autentici massacri, rivalit intestine e clamorosi errori strategici, and in scena lo scontro tra due figure leggendarie: Riccardo I d'Inghilterra e il sultano curdo Saladino, due nobili guerrieri che combatterono fino all'ultimo respiro una guerra scatenata per cause non sempre nobili. Ancora oggi quel conflitto non cessa di influenzare la storia dell'Occidente e quella del mondo islamico.
Guardia e pomolo sono realizzati in acciaio satinato ed anticato; l'impugnatura in legno ricoperto da morbida pelle nera cucita a mano; la lama, ottimamente bilanciata e temprata realizzata in acciaio ad alto tenore di carbonio: pu quindi flettere per assorbire colpi in tutta sicurezza ed adatta ad essere maneggiata per praticare forme. La spada inoltre accompagnata da un fodero realizzato in cuoio e cucito a mano ed acciaio satinato.
Dimensioni: Lunghezza totale 99cm. - dimensioni lama 82x5cm. - Peso 1130g.5399€200.82Out of stock -
Windlass - 300 - Leonidas Spartan Sword - 881010 - products based on films
This battle ready sword, faithfully reproduces the sword of Sparta used in the 300 and 300 Rise of an Empire movies.
Blade: 1050 battle ready carbon steel
Handle: Burnished steel and finely stitched leather
Blade length: 65cm.
Total length: 76.50cm.
Blade thickness: 3mm.
Balance: advanced, at 7cm. from the guard branch
Weight: 1250g.
Sheath: in leather881010€221.31Only 0 leftOnly 0 left -
Museum replicas Windlass - English Two Hands Sword 501060 - spada storica
Replica della spada n. IV-1787 presente nella Reale Armeria d'Inghilterra.
Ben bilanciata e relativamente leggera, consente un brandeggio abbastanza rapido nonostante l'indubbia imponenza.
Lama: in acciaio al carbonio - non affilata
Lunghezza lama: 111.5cm.
Spessore lama: max 4.6mm.
Lunghezza Totale: 145.5cm.
Peso: 2050g.
Bilanciamento:9 cm dalla guardia501060€262.30Out of stock -
Musum Replicas Windlass - Pirate Cutlass 500160 - spada storica
Riproduzione fedele di una sciabola da pirata del 1700.
Realizzata in acciaio al carbonio, questa spada è ben bilanciata e molto robusta.
Lama: in acciaio al carbonio - non affilata
Lunghezza lama: 56.5cm.
Spessore lama: max 4mm.
Lunghezza Totale: 75cm.
Peso: 1230g.
Bilanciamento: 9,5 cm dalla guardia
Fodero in cuoio e metallo500160€229.51Out of stock -
Museum Replicas Windlass - Verneuil Sword 500974 - spada storica
Spada a una mano e mezza dall'ottima bilanciatura. Finitura bronzea su pomo, guardia e particolari in metallo del fodero.
Lama: in acciaio ad alto tenore di carboniopriva di filo
Lunghezza totale: 113 cm.
Lunghezza lama: 90,5 cm.
Spessore lama all’elsa: 4 mm.
Spessore lama alla punta: 3 mm.
Bilanciatura: avanzata a 12,5 cm dall’elsa.
Lunghezza impugnatura: 21 cm. (15,4 cm. la parte con copertura in cuoio)
Lunghezza elsa: 21 cm.
Peso spada: 1.140g.
Peso con fodero: 1.440g.
Fodero: pelle nera e acciaio
Impugnatura: pelle nera
Note: utilizzabile per praticare forme o per contatti leggeri/medi500974€213.11Out of stock -
Museum Replicas Windlass - Chateauneuf De Randon Sword - spada storica
Perfetta riproduzione storica della spada utilizzata dal comandante Bertrand du Guesclin, soprannominato "Aquila della Britannia", durante l'assedio a Châteauneuf-de-Randon nel 1380. La spada, realizzata artigianalmente, ha una perfetta bilanciatura ed è adatta per esposizione, per rievocazioni storiche e per contatti di leggera/media entità.
Descrizione Tecnica:
* Lama non affilata in acciaio al carbonio 1050 temprata a 52HRC
* Lunghezza lama di 86cm
* Lunghezza totale di 107cm
* Spessore lama di 4mm
* Lunghezza impugnatura 13cm
* Peso spada di 1106g.
* Peso spada con fodero di 1496g.
* Bilanciatura avanzata a 9cm dalla guardia
* Pomolo e guardia in acciaio al carbonio 1050
* Impugnatura in cuoio
* Fodero in cuoio, cucito a mano, con finiture in acciaio al carbonio
* Cintura in cuoio amovibile con asole per spada
* Incisioni su lama e pomolo
Cenni Storici:
Châteauneuf-de-Randon è un comune francese, situato nel dipartimento della Lozère nella regione Languedoc-Rossiglione. I suoi abitanti sono chiamati Castelrandonnais.
Questa città medioevale fu costruita dai Randon sulla strada per Mende verso 1150. E' stata la seconda residenza dei Baroni di Randon, dopo avere traslocato dal castello Puech David.
Durante la Guerra dei Cent'anni, fu combattuta la battaglia di Châteauneuf-de-Randon nel 1380 tra gli inglesi e i francesi.
Nel 1380 la fortezza di Châteauneuf-de-Randon fu assediata dai francesi, sotto il comando di Bertrand du Guesclin, e la fortezza fu difesa da una guarnigione inglese comandata da De Ros.
Dopo una difesa più che ostinata, la città si arrese il 4 luglio. L'assedio però, fu fatale al comandante francese.8684€348.36Out of stock -
Museum Replicas Windlass - Two Hand Battle Sword - 501008 - two-handed sword
Blade: carbon steel WITH ARROUNDED POINT and 4 MM THREAD suitable for battle ready
Grip: leather
Pommel: Carbon steel
Guard: carbon steel
Scabbard: leather and steel
Blade length: 99cm.
Total length: 127.5cm.
Blade width: 50mm.
Blade thickness: 5mm.
Weight: 1840g.
Balance: 11cm.501008€229.51Out of stock -
Museum Replicas Windlass - Sword of Robin Hood 882501 - prodotti tratti da film
Replica ufficiale dietro licenza ufficiale Universal Pictures, della spada di Robin Hood diretto da Ridley Scott.
Lama: Acciaio al carbonio 1050 battle ready
Impugnatura: in metallo e legno
Lunghezza Lama: 89cm.
Lunghezza Totale: 101,5cm.
Spessore Lama: 4mm.
Peso: 1890g.
Fodero: non compreso.882501€254.10Out of stock -
Museum Replicas Windlass - Spartacus Sica Arena Sword - prodotti tratti da film
Spada ufficiale prodotta dalla Windlass e tratta dalla serie televisiva "Spartacus" - Blood and Sand.
Lama: Acciaio forgiato a mano in acciaio al carbonio
Impugnatura: in legno, e metallo
Lunghezza Lama: 61cm.
Lunghezza Totale: 80cm.
Spessore Lama: 3mm.
Bilanciatura: avanzata, a 12cm. dal ramo di guardia
Peso: 900g.8700€143.44Out of stock -
Museum Replicas Windlass - Spartacus Arena Sword - prodotti tratti da film
Spada ufficiale prodotta dalla Windlass e tratta dalla serie televisiva "Spartacus" - Blood and Sand.
Lama: Acciaio forgiato a mano in acciaio al carbonio
Impugnatura: in legno, e metallo
Lunghezza Lama: 61,5cm.
Lunghezza Totale: 84cm.
Spessore Lama: 3mm.
Bilanciatura: avanzata, a 12cm. dal ramo di guardia
Peso: 1440g.8701€159.84Out of stock -
Museum Replicas Windlass - Roman Gladius Pompeii - handcrafted sword
The way of doing the Roman army was direct and pragmatic and that is why they chose the gladius as their main sword since it was from the beginning practical, efficient, lethal and excellent in any combat situation; both cut and stock.
At the end of the 1st century AD a new model of gladius the Pompeii type was introduced. This one had a straight blade and a shorter tip the size ranged from 420mm to 500mm with a width between 42 - 45mm.It was much more balanced than the Mainz type and was suitable for causing cutting and lunging wounds. models had a bone or wooden handle protected by a wooden guard and were counterbalanced by a wooden knob.
Blade: 1095 carbon steel
Handle: wood
Blade length: 50.5cm
Total length: 69cm
Handle length: total 18.5cm - space for the hand 8.5cm
Blade width: 5.2cm
Blade thickness: 4mm
Balance: advanced, at 10.5cm. from the guard
Weight: 702g
Weight with sheath: 1084g
Sheath: wood, leather and bronze500598€172.13Only 0 leftOnly 0 left -
Museum Replicas Windlass - Soul of the Raven Knife 401472 - artisanal sword
Blade: 1095 carbon steel
Handle: metal
Blade length: 33.5cm
Total Length: 49cm
Handle Length: 15.5cm
Blade width: 4cm
Blade thickness: 4mm
Balance: advanced, at 3.5cm. by the guard
Weight: 492g
Weight with sheath: 655g
Sheath: black leather and steel401472€98.36Out of stock -
Museum Replicas Windlass - Gladio Romano Mainz - artisan sword
Blade: 1095 carbon steel
Handle: faux ivory
Blade length: 50cm
Total Length: 69cm
Handle Length: 9.3cm <br Blade Width: 5.5cm
Blade thickness: 4mm
Balancing: advanced, at 11cm. from the guard
Weight: 720g
Weight with scabbard: 1118g
Sheath: wood, leather and bronze500360€217.21Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Musketeers Rapier 500784 - spada artigianale
In onore di Alexandre Dumas e dei suoi personaggi senza tempo delle sue amate novelle, queste spade replicano in modo perfetto la tipologia di armi francesi in voga nel 1600; in particolare, entrambe hanno inciso sulla guardia la croce francese, simbolo dei Moschettieri.
Questa spada veniva utilizzata come arma primaria dai Moschettieri francesi quando non era possibile utilizzare le armi da fuoco ad avancarica. La guardia è ambidestra ed offre ottima protezione.
La lama è flessibile in acciaio ad alto tenore di carbonio ed ha una lunghezza di 95cm. per una larghezza di 3.5cm; la lunghezza totale è di 117cm. ed elsa, impugnatura, guardia e pomolo sono in acciaio inox. E' accompagnata da un fodero in acciaio e cuoio blu.500784€213.11Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Long Sword of Roven - 500794 - Handcrafted Sword
This replica, built with methodologies and principles very similar to those used in the Middle Ages, is aesthetically detailed and well finished like any display product but also absolutely functional, flexible and well balanced thanks to the production care and the carbon steel used tempered to a hardness 45/49 HRC.
Known by many names (war sword, great sword, broadsword, long sword or simply two-handed sword) it has long confused many collectors but has certainly carved out a place among the most popular weapons.Its length ensures power, resistance and helps to keep a reasonable distance from the opponent. Thanks also to the presence of the ricasso (part of the blade without a cutting edge placed after the guard) this weapon is even more flexible as if necessary it can also be held as a short spear.
The blade is made of carbon steel with a wooden handle woven with leather.
Guard and knob are made of steel.
The scabbard, included with the sword, is in leather.
Total length: 125cm
Blade length: 96cm
Blade width: 8 cm
Weight: 1.35 kg
500794€204.10Only 0 leftOnly 0 leftOut of stock -
Forgotten Realms - Drizzt Do' Urden - Twinkle Sword - spada fantasy
La Storia:
Protagonista della serie di romanzi scritti da R.A. Salvatore ed editi da Armenia, Drizzt Do' Urden è un elfo scuro o Drow, dallequalità d’animo completamente opposte rispetto a quelle del resto dei suoi simili che vive nel sottosuolo dei ForgottenRealms, nella città di Menzoberranzan.
Come ogni nobile elfo scuro della sua città nativa, Drizzt riceve l’addestramento più adeguato alle propriecaratteristiche psichiche e fisiche; nel suo caso, grazie ad una straordinaria agilità e alla sua ambidestria sarà suo padre, Zaknafein, il migliormaestro d’armi di tutta Menzoberranzan, ad istruirlo nell’arte del combattimento con le sue amate scimitarre Twinkle e Icingdeath.
Ancora più importante sarà il ruolo che avrà Zaknafein nella formazione mentale di Drizzt: infatti, quasicertamente grazie a fattori sanguigni, egli è una mosca bianca nell’oscurità dell’underdark. La sintonia che sisvilupperà tra i due, li porterà a conoscersi sempre più profondamente e metterà Drizzt davanti ad una scelta:restare a Menzoberranzan e vivere sotto ai crudeli voleri della Matrona Madre (scelta che a suo tempo aveva fattoZaknafein), fuggire e vivere da reietto nel buio profondo oppure conquistarsi un posto sulla terra, sotto i raggi del sole.
Dettaglio Prodotto:
La lama, con incisioni elfiche oscure, è realizzata in acciaio al carbonio full tang con impugnatura in legno e corda ricoperte in cuoio. Guardia e pomolo sono in acciaio ed in quest'ultimo vi è incastonato uno Zaffiro artificiale. Il fodero, compreso con la spada, è in cuoio. Sono inoltre compresi i certificati di garanzia e di autenticità che comprovano che questa sia l'unica versione ufficiale della spada disegnata da Todd Lockwood ed utilizzata da R.A. Salvatore nei suoi romanzi. Lunghezza totale: 94cm - Lunghezza della lama: 75cm5385€228.69Out of stock -
Museum Replicas Windlass - Spada dei Crociati
Guardia e pomolo sono realizzati in acciaio satinato ed anticato con impunture in oro 24k. l'impugnatura è in legno ricoperto da morbida pelle nera cucita a mano; la lama, ottimamente bilanciata e temprata è realizzata in acciaio ad alto tenore di carbonio: può quindi flettere ed è adatta ad essere maneggiata per praticare forme. La spada è inoltre accompagnata da un fodero realizzato in cuoio e cucito a mano ed acciaio satinato.
Dimensioni: Lunghezza totale 101cm. - dimensioni lama 84x5cm. - Peso 1240g.5400€290.98Out of stock -
Museum Replicas Windlass - Soul of the Raven Sword - spada Artigianale
Guardia, impugnatura e pomlo sono realizzati in acciaio brunito finemente lavorato. Il pomolo può anche essere utilizzato come una mazza. La lama, ottimamente bilanciata e temprata è realizzata in acciaio brunito ad alto tenore di carbonio rendendola "battle-ready". Può quindi flettere per assorbire colpi in tutta sicurezza ed è adatta ad essere maneggiata per praticare forme o per andare ad impattare. La spada è inoltre accompagnata da un fodero decorato realizzato in cuoio e cucito a mano e acciaio satinato.
Dimensioni: Lunghezza totale 110cm. - Dimensioni lama 80x5x0.5 cm. - Peso 1580 g.5407€213.11Out of stock -
Museum Replicas Windlass - Belt Dagger - 401386
This splendid little dagger from around 1450 is handcrafted in carbon steel with mirror polishing; excellently balanced, it has a wooden handle and a hand-sewn black leather sheath embellished with steel details.
Blade: carbon steel NOT SHARP
Handle: wood
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 205mm.
Handle length: 85mm.
Total length: 335mm.
Blade width: 25mm.
Blade thickness: 4mm.
Weight: 226g.
Weight with sheath: 294g.5408€90.16Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Scottish Dagger - daga artigianale
Questa daga del 1650 è in assoluto uno degli accessori più utilizzati nel corso del medioevo e nel rinascimento ed è direttamente derivato dalle armi scozzesi. E' realizzata artigianalmente in acciaio al carbonio con politura a specchio; ottimamente bilanciata, ha impugnatura e fodero in cuoio nero cucito a mano.
Lama: acciaio al carbonio
Impugnatura: cuoio nero
Pomolo: acciaio al carbonio
Guardia: acciaio al carbonio
Fodero: cuoio nero e acciaio
Lunghezza Lama: 295mm.
Lunghezza Impugnatura: 85mm.
Lunghezza Totale: 435mm.
Larghezza Lama: 30mm.
Spessore Lama: 3mm.
Peso: 405g.
Peso con Fodero: 515g.5409€106.56Out of stock -
Museum Replicas Windlass - Soul of the Raven Mace 60624 - spada Artigianale
Corpo e Testa: acciaio al carbonio brunito
Impugnatura: cuoio nero
Dimensioni Testa: 75x70mm.
Lunghezza Impugnatura: 200mm.
Lunghezza Totale: 600mm.
Spessore Corpo: 20mm.
Peso: 1080g.60624€98.36Only 0 leftOnly 0 leftOut of stock -
Windlass - 15th Century Long Sword - historical sword
Around 1450, the long sword, often called "one-and-a-half", was widely used in war, but it was also often a weapon of self-defense for civilians. Coupled to a dagger it was excellent against thieves, brigands and assassins, often organized into gangs that roamed the countryside.
Equipped with a good tip and adequate length, it allowed opponents to be kept at a distance. Its average weight allowed it to be used easily with one hand, in combination with the dagger in the other. Moreover, thanks to the length of the handle, it could be used with both hands to have greater control and perform very powerful cuts.
Blade: carbon steel - NOT SHARP
Handle: black leather and wire
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 90cm.
Handle Length: 24cm. (including knob)
Total Length: 115cm.
Blade width: 45mm.
Blade thickness: 4mm.
Weight: 1514g.
Weight with Sheath: 1800g.
Balance: advanced to 13cm.500800€233.61Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Spada Europea 500664 - spada Artigianale
Stupendamente bilanciata, questa spada senza fronzoli che prende spunto dalle spade europee del 1250. La spada è adatta ad essere utilizzata per forme o contatti leggeri; la lama flessibile è infatti in acciaio al carbonio così come guardia e pomolo. Impugnatura e fodero sono in cuoio nero cucito a mano.
Lama: acciaio al carbonio
Impugnatura: cuoio nero
Pomolo: acciaio al carbonio
Guardia: acciaio al carbonio
Fodero: cuoio nero e acciaio
Lunghezza Lama: 86cm.
Lunghezza Impugnatura: 10.5cm.
Lunghezza Totale: 102cm.
Larghezza Lama: 50mm.
Spessore Lama: 4mm.
Peso: 1245g.
Peso con Fodero: 1580g.
Bilanciatura: Avanzata a 13cm.500664€159.84Only 0 leftOnly 0 leftOut of stock -
Windlass - German Bastard sword - Historical sword
Perfect replica of the A477 sword of the Wallace Collection and like many other German swords it is first and foremost a sword designed for cutting, thanks to its cross-sectional blade which gives extreme resistance.
It is also a splendid example of a one-and-a-half sword, with proportions of a single-handed sword but a long handle suitable for holding the second hand in support; this gives it an exceptional balance and unparalleled speed of response.
Blade: 1095 carbon steel - not sharp
Handle: black leather
Blade length: 76cm
Total Length: 98.5cm
Handle Length: 20cm
Blade width: 5cm
Blade thickness: 4mm
Balance: advanced, at 8.5cm. by the guard
Weight: 1822g
Weight with sheath: 2120g
Sheath: leather and antique steel500792€0.00Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Landsknecht Dagger - daga artigianale
Lama: acciaio ad alto tenore di carbonio
Impugnatura: cuoio nero
Pomolo: acciaio al carbonio
Guardia: acciaio al carbonio
Fodero: cuoio nero e acciaio
Lunghezza Lama: 270mm.
Lunghezza Totale: 410mm.
Spessore Lama: 2,5mm.
Peso: 320g.
Peso con Fodero: 410g.
Bilanciatura: sulla guardiaFodero: in cuoio5446€131.15Out of stock -
Museum Replicas Windlass - Soldiers Dagger - 401760 - handmade dagger
Blade: high carbon steel
Handle: black rope
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 250mm.
Total length: 375mm.
Blade thickness: 2.5mm.
Weight: 445g.
Weight with Sheath: 570g.
Balancing: on the guard
Sheath: in leather5447€139.34Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - War Sword 500924 - handcrafted sword
This kind of battle ready sword was common throughout Europe during the Middle Ages. Structured to be easily used with one hand, it still allows a second hand in support to give more power.
Blade: carbon steel
Handle: in wood, wire and dried casing
Knob: carbon steel
Guard: carbon steel
Sheath: leather
Blade length: 91cm.
Total length: 113cm.
Blade width: 50mm.
Blade thickness: 5mm.
Weight: 1360g.
Weight with Sheath: -500924€180.33Out of stock -
Museum Replicas Windlass - 16th Century Battle Axe - Artigianale
Quest'ascia tipica del 16esimo secolo venne sviluppata come arma contundente dal momento che spade e pugnali avevano ormai perso efficacia contro le corazze a piastre.
Lama: acciaio al carbonio
Impugnatura: legno
Pomolo: -
Guardia: -
Fodero: -
Lunghezza Lama: 22x17cm.
Lunghezza Totale: 63cm.
Larghezza Lama: -
Spessore Lama: -
Peso: 1295g.
Bilanciatura: -5478€98.36Out of stock -
Museum Replicas Windlass - Sword of Ibelin 500816 - The Crusades - Artisan Sword
Blade: carbon steel
Handle: wood and leather
Knob: aluminum alloy
Guard: aluminum alloy
Sheath: -
Blade length: 91cm.
Handle Length: 15cm.
Total Length: 114cm.
Blade width: 50mm.
Blade thickness: 3mm.
Weight: 1360g.
Weight with Sheath: -
Balancing: Advanced to 9cm.
Support: Painted wooden wall plate500816€233.61Out of stock -
Museum Replicas Windlass - Italian Bastard Sword 500890 - Handcrafted Sword
This splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so that you can use a second hand in support but can also use the sword in one hand. thanks to its weight and small size.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total length: 105cm.
Blade width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -5485€258.20Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Spada di Crecy - Spada Artigianale
La lunga serie di schermaglie tra Francia ed Inghilterra dal 1337 al 1453 è conosciuta collettivamente col nome di "Guerra dei Cent'anni". Da un lato i sovrani inglesi cercavano di conservare ed espandere i loro feudi in territorio francese al fine di recuperare prestigio dopo le sconfitte subite anni addietro e la perdita dei loro possessi in Normandia. Dall'altro lato i re francesi volevano scacciare gli inglesi definitivamente per occupare le Fiandre.
La scintilla del conflitto la diede Edoardo III di inghilterra quando cercò di salire al trono di Francia - dopo la morte del vecchio reggente Carlo IV- forte dell'appoggio di sua madre Isabella di sangue reale francese.
Lama: acciaio al carbonio
Impugnatura: cuoio
Pomolo: acciaio al carbonio
Guardia: acciaio al carbonio
Fodero: cuoio e acciaio
Lunghezza Lama: 91cm.
Lunghezza Totale: 115cm.
Larghezza Lama: 40mm.
Spessore Lama: 5mm.
Peso: 1270g.
Bilanciatura: -5486€229.51Out of stock -
Museum Replicas Windlass - Early Scottish Dirk 400508 - Craft Sword
This dagger of about 1700 descends directly from the ballock dagger and is in all respects a true war blade. From the very beginning it gained popularity and was used either alone or with a shield, sword or claymore.
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 38cm.
Total Length: 53cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 430g.
Balancing: -400508€110.66Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Arbedo Sword - Spada Artigianale
La battaglia di Arbedo (1422) segnò l'arresto, per alcuni decenni, dell'espansione dei Conf. a sud delle Alpi (Campagne transalpine). Determinato a ricostituire il suo ducato, il duca di Milano Filippo Maria Visconti propose agli Urani e agli Obvaldesi di rivendergli la città e le fortezze di Bellinzona, che questi ultimi avevano acquistato nel 1419 dai signori de Sacco e che costituivano l'avamposto difensivo delle loro più recenti annessioni (Leventina, Blenio, Riviera). In seguito al loro rifiuto, nell'aprile del 1422 il duca affidò la riconquista al condottiero Francesco da Bussone, detto il Carmagnola, che in pochi giorni si impadronì di Bellinzona, della Riviera, di Blenio e della Leventina fino al monte Piottino. Gli Urani e le truppe alleate (arruolate in Leventina, in Nidvaldo, a Lucerna e Zugo), in tutto 2500 uomini, dopo aver assediato invano Bellinzona si accamparono nei pressi di Arbedo, in attesa dei rinforzi inviati da Svitto, Glarona e Zurigo; alcuni contingenti assai indisciplinati si separarono dal grosso delle truppe per darsi al saccheggio nella Mesolcina. Il Carmagnola, che rapidamente e in gran segreto aveva riunito un esercito forte di 16'000 uomini, tra cui 5000 cavalieri, all'alba del 30.6.1422 sorprese i Conf. nel loro accampamento. Dopo un furibondo combattimento contro un avversario in superiorità numerica, le truppe conf. furono costrette ad arretrare e a riparare sui contrafforti del monte Arbino; in seguito, probabilmente con l'aiuto dei saccheggiatori, rientrati nel frattempo nei ranghi, riuscirono a sfondare il fronte nemico, a guadagnare la riva destra della Moesa e a battere in ritirata. La battaglia fece registrare pesanti perdite, con centinaia di morti in entrambi gli schieramenti. Uri e Obvaldo dovettero rinunciare ai territori situati a sud del monte Piottino, ma il trattato di pace del 1426 ristabilì le franchigie doganali tra il San Gottardo e Milano, ottenute dagli Svizzeri agli inizi del sec. In seguito alla sconfitta di Arbedo tra i Conf. sorsero profonde divisioni, sia tra coloro che avevano partecipato alla battaglia, sia tra coloro che si erano astenuti (Berna) o che si erano limitati a rispettare le clausole dei patti di alleanza (Zurigo), inviando rinforzi giunti peraltro troppo tardi.
Spada utilizzabile ad una o due mani.
Lama: acciaio al carbonio
Impugnatura: cuoio
Pomolo: acciaio al carbonio
Guardia: acciaio al carbonio
Fodero: cuoio e acciaio
Lunghezza Lama: 79cm.
Lunghezza Totale: 105cm.
Larghezza Lama: 50mm.
Spessore Lama: 3,5mm.
Peso: 1140g.
Bilanciatura: 9cm.5555€200.82Out of stock -
Museum Replicas Windlass - Spada Lunga Flangiata - Spada Artigianale
Lama: acciaio ad alto tenore di carbonio
Impugnatura: cuoio nero
Pomolo: acciaio al carbonio
Guardia: acciaio al carbonio
Fodero: cuoio nero e acciaio
Lunghezza Lama: 97 cm.
Lunghezza Totale: 122cm.
Spessore Lama: 4mm.
Peso: 1440gr.
Peso con Fodero: 2000g.
Bilanciatura: sulla guardiaFodero: in cuoio5556€204.92Out of stock -
Museum Replicas Windlass - Classic Medieval Sword 500020 - Handcrafted Sword
One-handed classic medieval sword that contains all the characteristics of the 1300s blades.
Blade: high carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 84cm.
Total length: 100cm.
Blade thickness: 4mm.
Weight: 1445g.
Weight with scabbard: 1870g.
Balance: Advanced to 13.5cm.500020€221.31Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Spartan Lakonia dagger 401178 - Handcrafted
This reproduction of lakonia, directly copied from the book "the spartan army", was the main weapon of the Spartan army, known for its cruelty and ardor in battle.
The blade is handcrafted in high carbon steel while the handle is completely made of bronze. The sword is also accompanied by a wooden scabbard covered with hand-stitched brown leather with bronze studs.
Type of production: Artisan
Blade: carbon steel
Handle: bronze
Blade length: 360mm.
Blade thickness: 4.5mm.
Total length: 500mm.
Balancing: advanced, to 1cm.
Weight: 895g.
Sheath: Brown Leather401178€127.05Only 0 leftOnly 0 leftOut of stock -
Museum Replicas Windlass - Roman Pugio 401392 - spada
Il pugio era un'arma utilizzata dalle legioni romane. Si trattava di un corto pugnale portato sul lato sinistro del proprio corpo dai soldati.
Nel I secolo d.c. venne adottato dall'esercito Romano. Il pugio veniva usato nel combattimento corpo a corpo, quando si era così vicini al nemico che il gladio non poteva servire più a niente.
Lama: acciaio al carbonio 1095
Impugnatura: legno
Lunghezza Lama: 31cm
Lunghezza Totale: 49,50cm
Lunghezza Impugnatura: 10cm
Spessore Lama: 3mm
Bilanciamento: avanzata, a 6cm. dalla guardia
Peso: 382g
Peso con fodero: 530g
Fodero: legno, cuoio e bronzo401392€90.16Only 0 leftOnly 0 left -
Museum Replicas Windlass - Polish Sword - spada medievale
Spada polacca a una mano. Ottimamente bilanciata e ben rifinita. Particolare la forma dell'impugnatura, con la copertura in cuoio di doppia consistenza che favorisce una solida presa.
Lama: in acciaio ad alto tenore di carbonio, priva di filo
Lunghezza totale: 94,5 cm.
Lunghezza lama: 75,5 cm.
Spessore lama all’elsa: 4 mm.
Spessore lama alla punta: 3 mm.
Altezza lama all'elsa: 5 cm.
Altezza lama alla punta: 3 cm.
Bilanciatura: avanzata a 10 cm dall’elsa.
Lunghezza impugnatura: 13 cm. (solo parte con copertura in cuoio)
Lunghezza elsa: 22 cm.
Peso spada: 1.394g.
Peso con fodero: 1.698g.
Fodero: pelle nera e acciaio
Impugnatura: pelle nera
Note: utilizzabile per praticare forme o per contatti leggeri/medi8683€217.21Out of stock
