Fallkniven

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Diamond sharpener excellent for recovering the sharpness of blades with particularly hard steels

Rod length of 30cm. and total length of 43cm.
Thermoplastic handle and steel ring.

Quality level: high

Diamond sharpening with two different sharpening grits.

The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.

For cleaning, use dish soap and warm water.

Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.

Dimensions of the diamond part:
10 cm x 2 cm

Total open size with plastic handle:
22 cm

Closed size:
12 cm x 3 cm
Weight: 67 gr

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box

Recommended use: Barbecue, Vegetable, Raw Meat, Fish

Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked Fallkniven

Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .

Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .

The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .

The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.

Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel

Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .

Quality level : High

<p>Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.</p>
<p>Dimensions of 55mm in width, 210mm in length and 6mm in thickness</p>
<p>Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.</p>

Pocket Stone Diamond medium grain, excellent for quickly sharpen knives and multi-purpose sports while outdoors.

Mounted on a practical nylon support, has dimensions of 20x60mm

Intended Use: Tactical / Military / Hunting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995

Fodero di ricambio originale Fallkniven, realizzato in Zytel, per modello F1 e PRK.

ATTENZIONE: l'articolo può subire variazioni rispetto a quanto visualizzato in foto.

Intended Use: Sport / Hunting / Military

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:

Survival knife - News from the Swedish company larger than the A1 model.

Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.

- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheath

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.

Intended Use: collection / Survival

Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials

Intended Use: collection / Survival

Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:

Intended Use: Sport / Hunting

Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numbered

Intended Use: Hunting

Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Lama: -
Production Blade: Japan
Handle: Birch Wood
Blade length: 69mm.
Blade Thickness: 3mm.
Total length: 145mm.
Balance: backlog of 1 cm from the branch guard
Weight: 54g.
Sheath: Leather
Notes: -

Intended Use: edc / sports

Blade: Stainless Steel San-Mai "Super Gold Powder" 62 HRC
Handle: Zytel
Blade length: 52 mm.
Blade Thickness: 2 mm.
Total length: 120 mm.
Weight: 26 g.
Closure: BackLock

Fallkniven Tre Kronor TK1

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Cocobolo Wood
Blade length: 100 mm.
Blade Thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black leather