Nitecore Hunting Flashlights with Remote Attachment and Activation

Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 5300mAh
* Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 20A

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FLASHLIGHT COMPATIBILITY
works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i, SRT7i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

Original Nitecore remote switch to be used by replacing the tail cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical, or airsoft purposes.

Once installed, it allows for temporary activation of the light by pressing the dedicated rubber remote pad; the light will turn off as soon as pressure on the pad is released. Additionally, it also integrates a standard power button on the side for normal flashlight use.

Compatible only with models:

MH12 PRO - MH25 PRO

The Nitecore GM02 Pro is made of aerospace aluminum alloy with HA III military-grade hard-anodized finish for high durability.

A large stainless steel thumb nut allows for adjustment and ensures stable mounting on a Picatinny rail.

It can accommodate flashlights with a body diameter from 25.8mm to 26.5mm and fits models like

Nitecore SRT7 SRT7i, SRT6i, MH12 Pro, and MH25 Pro.

Dimensions L-4.83 cm x W-4.29 cm x H-4.29 cm

Weight 68 grams

COMPATIBILITY:
Only with the following NITECORE flashlight models: P10i, P10iX, P20i, P20i UV, P20iX, P30i, P35i


DESCRIPTION:
2.4G radio-frequency wireless remote switch to remotely control in ignition and light selection your NITECORE flashlight belonging to the "i" series to be used by replacing the back cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is to be mounted in place of the original flashlight cap and a wireless remote control to be placed via hook-and-loop (provided) or Velcro (provided) to your firearm or wherever you find most convenient within a range of about 1m. so that you can turn on and control your flashlight without the hassle of a cable.

It allows both temporary lighting of the light (light is emitted by pressing and holding the pad, goes out by releasing it) and strobe function via dedicated button; it also allows fixed lighting of the light with subsequent possibility of varying its luninous power.


PACKAGE CONTENTS:
* Wireless back cap
* Wireless remote switch already paired and with batteries already inserted
* Velcro-type strap closure
* Velcro-type hook-and-loop strap
* 2 Picatinny rail mounts

Green filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a green light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

Red filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a red light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

P30i hunting torch with GM02MH magnetic attachment

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

Original Nitecore remote control to be used by replacing the rear cap of your flashlight; ideal to be used with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is mounted in place of the original cap of the flashlight and a removable remote cable that attaches via USB-C plug. Once plugged in, it allows both the temporary switching on of the light (the light is emitted by pressing and holding the pad, it turns off by releasing it) and the strobe function through a dedicated button; it also allows the fixed switching on of the light with the subsequent possibility to vary its light power.

On the back, the aluminum cap has also a standard integrated power button that allows to use the flashlight normally (on and off), but that does not allow to select the light power or the STROBO light.

Diameter cap: 28.6mm
Total cable length: 307mm

Compatible only with models

P10i, P20i and P30i

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).

Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.

HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".

The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.

FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72h

Laboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery

COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.

Accessory for Nitecore tactical flashlights made of aeronautical aluminum with HA III type military anodization, it is compatible with any flashlight that has a 1 "(2.54cm) diameter barrel.

Compatible with Picatinny rails, it has dimensions of 71mm (height) x 30mm (width) x 31mm (length) and a weight of 73g.

* Easy to attach and remove
* Central fixing screw that does not require tools
* Compatible with 1 "/ 2.54cm cylindrical shaft flashlights

Designed exclusively for Nitecore i4000R torches and Nitecore lighting systems of the 21700i series

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* Positive Pole: Flat and present on the lower and upper part of the flashlight
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
* Continuous Discharge Capacity: 15A

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for misuse or reverse polarity of the batteries

TORCH COMPATIBILITY
works only with NITECORE i4000R torches and NITECORE 21700i series lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

You can recharge it normally, inserting it in a charger or recharge it like a mobile phone: inserting a USB-C cable!

The new Nitecore NL2150R is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C charging port so that it can be recharged directly using a USB charging cable (sold separately).

Just connect the battery to a available USB power source (for example to a PC or to a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be completed.

Alternatively, these batteries can be charged normally, like any rechargeable battery, i.e. using any external charger compatible with Li-Ion 21700 batteries.

Equipped with integrated intelligent charging circuits and other safety functions, this battery works in complete safety respecting the precautions indicated.

 
BATTERY CHARACTERISTICS
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* USB charging voltage: 5V
* USB charging current: 5A (Max)
* Positive pole: Protruding
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltages and 4.25V overvoltages

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not reload on carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for incorrect use or with inverted polarity of the batteries

Original Nitecore remote ignition control to be used by replacing the rear cap of your flashlight; ideal for use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary switching on of the light by pressing the special remote rubber pad; the light will go out as soon as the pressure on the pad is stopped. It also integrates a standard power button on the side which allows the torch to be used normally.

Cap diameter: 28.6mm
Total length: 307mm

Compatible only with models:

NEW P12 - NEW P30

WHY CHOOSE IT:

Hunting / scouting use - Remarkable illumination depth 618m - Convenient charging system integrated in the battery - High autonomy thanks to the new 5000 mAh 21700 battery - Practicality and immediacy of the light selection controls.

KEY FEATURES:

* Italian Guarantee Nitecore Italy: Torch guaranteed 5 years - Battery guaranteed 12 months
* Charging system integrated in the Li-ion battery via Micro-USB port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Use a Cree XP-L HI V3 for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with anodized military specifications
* IP68 waterproof and submersible (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7 3400mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically adjusted + Strobo, S.O.S. and Beacon
Power and Durability: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Peak power: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear Button
Bright selection method: Front Button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: 21700 with micro-usb direct charging included in the package - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head)
Weight: 158g. - batteries excluded
Accessories: clip, wrist strap, belt cordura sheath, spare o-ring, anti-roll ring
Waterproof: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1.5m in height

HUNTING KIT

the set includes:

- Nitecore NEW P30 torch

- RSW3 remote connection

- Magnetic attack

Technical data of the torch

KEY FEATURES:

* Nitecore Italia Italian Guarantee: Torch guaranteed for 5 years - Battery guaranteed for 12 months
* Charging system integrated in the Li-ion batteries via USB Type C port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Uses a Cree XP-L HI V3 LED for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. in height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 21700 3.6V 5000mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically regulated + Strobe, S.O.S. and Beacon
Powers and Durations: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Power peak: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear button
Light selection method: Front button
Head: aviation aluminum
Body: aviation aluminum
Finish: anodized, Type III
Lens: ultra-transparent hardened glass with anti-reflective treatment
Batteries: included 1x 21700 with USB Type C direct charging - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head) - 2.72 (D. tail)
Weight: 158g. - batteries excluded
Accessories included: Clip, Wrist strap, Spare O-ring, Spare back button, Adapter for 18650 / CR123 batteries, Sheath
Waterproofing: as per IPX-8 standard, submersible up to 2mt. depth for 30min.
Impact resistance: withstands drops from 1.5m in height

Aggancio universale per torce dotato di supporto magnetico e apertura rapida compatibile con qualsiasi torcia con fusto di diametro da 24 a 27mm. 


Attraverso questo attacco, è possibile fissare una torcia ad un fucile o a qualsiasi tipo di supporto cilindrico tramite doppio aggancio magnetico.

- Materiali: alluminio aeronautico anodizzato e magneti al neodimio
- Misure: 50mm lunghezza x 65mm altezza
- Diametro utile torcia: da 24mm a 27mm

Filtro rosso realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

Filtro verde realizzato in vetro indurito ultra-trasparente con corpo in gomma, in modo da poterlo adattare a diverse tipologie di torce con teste del diametro di 50mm.

Questo filtro trasforma il fascio della vostra torcia in luce verde, adatta in fase di escursionismo, outdoor e per uso venatorio dal momento che non spaventa ed allerta gli animali. Indicata anche per letture tattiche di cartine e documentazione varia.

Compatibilità:

NITECORE: P30 - MT40 - MT40GT - MT42
JETBEAM: BC40

Accessorio per torce Nitecore

- attacco fucile creato appositamente per i modelli Nitecore
- compatibile con modelli di altre marche

Attraverso questo attacco, è possibile fissare una torcia alla slitta di un fucile.
(Picatinny / Weaverrail tactical weapons systems)
- Materiali: alluminio
- Misure: 44mm x 45mm
- Diametro di fissaggio: da 25mm a 27mm