Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box

Essential tool for the maintenance and maintenance of the cutting edge of a knife.

FINE GRAIN: ideal for frequent use (even every time you are going to cut) on not particularly worn threads.

Handle: in synthetic material.
Total length: 43 cm.
Abrasive element length: 29 cm.
Weight: 440 gr.

Tips for the maintenance of knives

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:

- Pay attention that the knives placed in the dishwasher collide with other objects; the blades could be damaged.

- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).

- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

Essential tool for the maintenance and maintenance of the cutting edge of a knife.

Handle: in synthetic material.
Total length: 38 cm.
Abrasive element length: 25 cm.
Weight: 225gr.

Tips for the maintenance of knives

Proper maintenance prolongs the life of the knife, makes work easier and safer and reduces the consumption of the wire. Some advices:

- Pay attention that the knives placed in the dishwasher collide with other objects; the blades could be damaged.

- Knives guaranteed for dishwashers that are not immediately washed in the machine should be rinsed under the water tap to remove the remains of highly corrosive foods (fats, vinegar, fruit juices).

- Make sure if the knives no longer cut perfectly, have them rectified or sharpened by professionals in the sector.

Recommended use: Barbecue, Vegetable, Raw Meat, Fish

Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked Fallkniven

Due Cigni - Mincing Knife - 2C740/25

Intended Use: Tactical / Military / Hunting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995

Intended Use: Sport / Hunting / Military

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:

Survival knife - News from the Swedish company larger than the A1 model.

Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.

- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheath

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.

Intended Use: collection / Survival

Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials

Intended Use: collection / Survival

Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:

Intended Use: edc / sports

Blade: Stainless Steel San-Mai "Super Gold Powder" 62 HRC
Handle: Zytel
Blade length: 52 mm.
Blade Thickness: 2 mm.
Total length: 120 mm.
Weight: 26 g.
Closure: BackLock

Fallkniven Tre Kronor TK1

The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.

Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Cocobolo Wood
Blade length: 100 mm.
Blade Thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black leather

In the ancient cutlery town of Maniago, DUE CIGNI has been passionately producing professional scissors and knives of the highest quality for over a century. 
Top quality special steels, innovative design and attention to the smallest details ensure that DUE CIGNI products do not go unnoticed by even the most demanding user. 
State-of-the-art machinery, qualified staff and renewal are the elements on which the solid basis of the success of the DUE CIGNI brand is founded. 
DUE CIGNI knives and scissors are ideal tools for professional users in the food and gastronomy sector who need a perfect, effortless cut that lasts for over a hundred years.

Recommended use: knife for filleting fish

Country of manufacture: Italy
Cutting edge steel: stainless steel 4116 X50CrMoV15 - HRC 55-57
Blade finish: satin
Blade length: 16cm.
Handle: black POM