Knife - Essential Tool for Camping, Outdoor Adventure and collection

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

* Smooth opening: the IKBS™ ball bearing pivot deploys the blade smoothly.
* Easy to sharpen: the high-carbon stainless steel blade takes the edge well
* Quick opening: the flipper deploys the blade quickly
* Strong and lightweight: the fiberglass-reinforced nylon handle is strong and lightweight
* Easy closure: the liner lock can be closed easily with one hand
* Carrying options: adjustable clip for left or right-handed carrying

Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel 1.4116
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 66.2mm.
Blade thickness: 2.26mm.
Length closed: 90.3mm.
Total length: 155.5mm.
Weight: 45.3g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movement

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Intended use: Sporting

Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.

Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.

* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring


Intended Use: EDC

Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assisted

The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.

This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.

* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket



Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings

The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.

This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.


* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket




Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended Use: Neck Knife

Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 2.6mm.
Total length: 133mm.
Weight: 49g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan Folts

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15Mov
Blade finishing: Satin finish
Handle: 2Cr13 stainless steel with blackwash and bronze finish
Blade length: 37mm.
Blade thickness: 3.6mm.
Length closed: 82mm.
Total length: 117mm.
Weight: 62g.
Closure: Slipjoint
Clip: -
Package: Cardboard box with CRKT logos
Notes: Design by Mike Bond - Snap hook for attachment - Bottle opener

Intended Use: Neck Knife

Production type: Industrial
Country of Production: China
Blade: Stainless steel 5Cr15MoV 55/57HRC
Blade Finish: Blacwashed
Handle: G-10
Blade Length: 54mm.
Blade thickness: 2.6mm.
Total length: 129mm.
Weight: 48g.
Scabbard: Polypropylene
Package: Cardboard box with CRKT logos.
Notes: Design dy Alan Folts

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: G10 and stainless steel with aluminum spacer
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 108mm.
Total length: 182mm.
Weight: 102g.
Closure: FrameLock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: G10 and Blackwashed stainless steel
Blade length: 76mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 187mm.
Weight: 102g.
Closure: FrameLock
Clip: in stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by T.J. Schwarz

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Destination of use: Sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.

Intended Use: Sporting

Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken Onion

Intended use: Sports / EDC

Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 61mm.
Blade thickness: 3.5mm.
Closed Length: 90mm.
Overall length: 151mm.
Weight: 119g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson Flipper

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Handle: Stainless Steel 2Cr13
Blade length: 54mm.
Blade thickness: 3mm.
Closed Length: 55mm.
Overall length: 114mm.
Thick when closed: 14mm.
Balancing: -
Weight: 96g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Lucas Burnley

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Blade: 8Cr13MoV stainless steel - Teflon 57/58HRC
Handle material: stainless steel 2CR13
Blade length: 7.5 mm.
Blade Thickness: 2.5 mm.
Total length: 180 mm.
Weight: 78 g.
Closure: Frame Lock
Clip: Stainless Steel
Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

Destinazione d'uso: Sportivo / EDC

Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion

Purpose: Sport / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -