Knife - Essential Tool for Camping, Outdoor Adventure and collection

Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition is a limited series version of only 250 pieces that preserves intact all the features of the famous Caimano Nero N.A. model, a non-automatic version of the tactical knife that Extrema Ratio delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy.

The Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition comes in an IP67-certified watertight Polypropylene technical case, with pressurization valve, weatherproof, dustproof and shockproof, inside of which is also an Extrema Ratio 25th Anniversary commemorative coin and metal plaque with the progressive number of the limited series.

Intended Use: Tactical/Military

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of Production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 231mm.
Weight: 180g.
Closure: Liner Lock with additional safety catch, when knife is open
Clip: deep pocket, reversible and removable, stainless steel
Notes: Limited edition made of only 250 pieces accompanied by polypropylene case and commemorative coin

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Multirole

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially Available Available.
* Sharpening: Factory.
* Marks on blade: A couple of light marks on burnishing.
* Marks on handle: Slight signs of wear on hardware and clip.
* Box: Present, but not in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: stainless steel removable and reversible
Packaging: cardboard box with Extrema Ratio logos

Thanks to its structure, RAO C is a tool that despite its small size, manages to guarantee the same qualities of robustness and reliability as its big brother while offering better portability and manageability.

The locking mechanism on opening is particularly strong as it is assisted by a safety system that turns it into a true fixed blade. The primary safety on the blade is activated by raising and lowering the locking pin. To provide the user with maximum safety in use, a practical and quick secondary safety has been applied, which can be activated simply by moving the locking pin horizontally.

For the purpose of lightening the steel frames, a template was laser-cut from the profile of the RAO C, which was then used to make a gadget that is delivered with the knife.


Intended use: hiking/tactical

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: anticorodal anodized with hard oxidation
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 225mm.
Weight: 239g.
Closure: modified front lock, with push-button aditional safety.
Notes: keychain gadget, with miniature profile of the knife

Extrema Ratio, on the occasion of the 10th anniversary of COM.FO.SE., presents a version in a limited series of only 70 pieces, "A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION". 

A.S.F.K. (Assault Special Forces Knife) is the dagger dedicated to and acquired by the Army Special Forces Command. This model recalls the tradition of arditism and the bloody trench battles punctuated by assaults with a bladed weapon. A.S.F.K. is a trench knife reimagined with a modern twist.

A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weatherproof, dustproof and shockproof. Inside is a metal plate with the numbering of the series limited to only 70 pieces.

Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Burnishing Geotech Camo
Handle: Forprene
Blade Length: 162mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Balance: backward
Weight: 413g.
Sheath: cordura, M.O.L.L.E. compatible.
Packaging: thermoplastic collectible case with logos 
Notes: limited and numbered edition made in only 70 pieces

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.

The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.

That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.

The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.

The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.


Intended Use: Tactical/Multi-role

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -

Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.

The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.

The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.

The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversary

Selvans Expeditions, as well as the Selvans model from which it derives, was born from the collaboration between Extrema Ratio and the Master instructor F.I.S.S. (Federazione Italiana Survival Sportivo e Sperimentale) Daniele Dal Canto. This tool is the result of the modification of the ONTOS, military survival knife, realized in order to accentuate and maximize the performance of the knife.

Selvans Expeditions uses Böhler N690 steel heat treated to 58 HRC with MIL-C-13924 burnishing and stone washed surface treatment (Dark Stone finish). The handle has been lengthened and the blade weighted to promote effective cutting strokes. It comes with a desert Cordura sheath with MOLLE system, equipped with a mini pouch containing paracord with flammable filament that can be used in case of emergency and/or critical weather conditions and a Firesteel for lighting fires.

The survival kit (not included and purchasable separately) has been optimized and includes whistle, chainsaw, drinking pads, compass, brass wire, flintlock, flashlight, paracord 2,5 mt. and sharpener.

Intended use: Survival / Heavy Utility

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924 with Dark Stone finish
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 312mm.
Balance: Advanced
Weight: 430g.
Sheath: Cordura, M.O.L.L.E. compatible.
Package: Cardboard box with Extrema Ratio logos
Notes: Designed and developed thanks to the collaboration with the instructor Daniele del Canto of F.I.S.S.S. (Federazione Italiana Survival Spotivo e Sperimentale).

THE BRAND
Exclusive collaboration between Coltelleria Collini and Extrema Ratio marketed under the brand KNIVES.IT. 

TECHNICAL DATA SHEET
Intended Use: Collection / Tactical / Neck knife
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade finish: Black PVD cat. MIL-C-13924
Handle: Stainless steel N690Co 58/60HRC
Blade length: 40mm.
Blade thickness: 5.5mm.
Total lenght: 166mm.
Weight: 86g.
Sheath: optional (available separately) in Kydex, handcrafted by the Italian Knife Maker Simone Tonolli.
Package: cardboard box with Extrema Ratio logos
Notes: knife created and manufactured by Extrema Ratio - each knife is numbered - Design by LoTactical

HISTORY
The Tengu takes its name from a mythical creature of Japanese folklore that is represented with both human and raven features, they had the reputation of being great warriors and legends say that some founders of martial arts were trained by them.

- It is designed to be used in many different grips, but is especially effective in the reverse grip.
- Designed to be carried in a variety of ways, whether as a neck knife, under shirt, clipped in a pocket or around the waist using optional systems such as Ulti-Clip or Tek-Lok or various M.O.L.L.E. type attachments.
- With its thickness of 5.5 mm. is extremely robust and thanks to the shape of the handle is comfortable even by those with large hands or those who want to use it with tactical gloves.
- The blade is compact, robust and very functional for both precision cutting and hard materials thanks to the serrated part on the back. The tanto-shaped tip is very robust and optimal for engraving work.

DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.

The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.

Intended Use: Tactical / Multi-role

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -

Japanese steel merges with Italian excellence

For this 2021 collaboration, exclusive to Coltelleria Collini, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

Intended Use: Neck Knife / Collector's Knife

Type of production: Industrial
Country of Production: Italy
Blade / Handle: Full, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: Satin finish
Blade length: 40mm.
Blade thickness: 3mm.
Total length: 129mm.
Weight: 55g.
Sheath: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - the central core of the blade and handle is made of carbon steel so it is recommended to wash/dry the knife very well after each use and protect the steel, during storage, with a light surface of lubricant to avoid rust and oxidation.

As in the ancient swords of the Japanese Samurai.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals individually taken:

- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
Selvan model: for this First Production Run a run of 5 pieces numbered from 1 to 5 was created.

The Selvans was born from the collaboration between Extrema Ratio and FISSS (Italian Federation of Sports and Experimental Survival). The project consists of modifying the Ontos, a military survival knife, to accentuate and maximize the performance of the knife as a hiking tool.

The handle has been lengthened and the blade weighted to favor the effectiveness of the cutting strokes and to make more use of the inertia of the stroke.

Intended use: Heavy Utility
Type of production: Industrial
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Testudo
Handle: Forprene
Blade length: 15.5mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Thick when closed: -
Balancing: advanced
Weight: 424g.
Sheath: nylon, MOLLE compatible
Packaging: Cardboard box with Extrema Ratio logos
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Project born with the brand of Collini KNIVES.IT cutlery

Custom Kydex sheath, made by Simone Tonolli, designed as an additional replacement for the Tengu knife

Type of production: Custom
Country of production: Italy
Material: thermoformed Kydex
Type of sheath: in "taco" format, with 8 steel rivets, designed for concealed carry or deep carry
Length: 165mm.
Width: 43mm.
Thickness: 8mm.
Weight: 25g.
Packaging: -
Notes: clip or coupling system not present / not supplied, sold separately, compatible with systems such as Ulti-Clip or M.O.L.L.E.
Compatibility: compatible only with the TENGU model by Coltelleria Collini, Knives.it, created in collaboration with Extrema Ratio

The Task series has been designed for all everyday cutting jobs.

The partially symmetrical blade with flat edge on both sides. The hollow part of the blade after the guard, which separates the sharp part from the handle, has been made to house the index finger during use, creating a grip point near the sharp part for better control while using the knife.

This feature, together with the support grip on the back of the knife, allows a better grip while avoiding the slipping of the hand on the blade. This allows you to carry out most cutting jobs with higher pressure.

Intended use: Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Desert Warfare (Burnished with laser engraving)
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Weight: 275g.
Sheath: Cordura
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin model: for this First Production Run a run of 11 pieces was produced, numbered from 1 to 11.

Special purpose cutting knife, specially developed for the 9th Col Moschin Parachute Assault Regiment, elite unit of the Folgore brigade.

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 265g.
Sheath: modular tactical, from thigh or belt, in Nylon
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel
Invia commenti
Cronologia
Salvate
Community

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin Compact model: for this First Production Run a run of 10 pieces numbered from 1 to 10 was created.

The lethality of the COL MOSCHIN knife in compact version. Supplied with rigid belt sheath and BELT-CLIP. The rigid sleeve can be positioned horizontally, vertically or in a 45 ° inclined position

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 212mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 209g.
Sheath: ABS with multi-position Tek-Lok attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a thin surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

The Extreme Ratio E.C.M. (Einsatzkommando Cobra Messer) is a fixed blade multipurpose knife, designed for operational uses for the famous Einsatzkommando "Cobra" special unit of the Austrian police, whose logo is laser engraved on the heel of the blade. The Extreme Ratio E.C.M. it combines the characteristics of a practical tool and those of a reliable weapon, in a compact configuration with a total weight of 240g.

The blade is made of Böhler N690 steel, hardened to 58 HRC and is 116 mm long, 5 mm thick and equipped with a flat edge. The profile of the blade is of the modified spear point type, with a false counter-thread ¾ in length on the back and a lower guard to protect the hand during use.

Both the guard and the knob have holes to facilitate the attachment of the knife to various tools or for the passage of laces. The blade has a Carbon-based DLC (Diamond-Like Carbon) surface coating making it hyper-resistant to abrasion and chemical aggression.

Given the heavy use of the tool, for the handle, instead of the usual Forprene, the more performing high-strength G10 is used.

It is fixed to the FULL TANG profile by two through screws and maintains all the known ergonomic characteristics of the Extrema Ratio handles. Being a knife designed for professional use, great importance was given to ease of port, accessibility and rapid extraction.

The polymer sheath is versatile and can be carried on a service belt or mounted on M.O.L.L.E. of tactical vests, backpacks or other equipment.

Intended use: Tactical / Military

Type of production: Industrial
Country of production: Italy
Blade: Bohler N690Co stainless steel at 58HRC
Blade treatment: DLC (Diamond Like Coating)
Handle: G10
Blade length: 106mm.
Blade thickness: 5mm.
Total length: 233mm.
Weight: 240g.
Sheath: Synthetic, polymer, MOLLE compatible
Packaging: Cardboard box with Extrema Ratio logos

The Giant Mamba has a "tanto" blade in 6.3 mm thick Böhler N690 steel with a hardness of 58 HRC, flat edge and full length lightening.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced. The MOLLE compatible sheath is made of shockproof nylon with a conical opening for rapid insertion and extraction and a system that avoids shaking noises, it is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous safety : simply pressing the trigger unlocks the blade.

 
Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Satin
Handle: Forprene
Blade length: 163mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 289g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Compact version of the CONTACT, the CONTACT C has a spearhead blade, in Böhler N690 steel with a hardness of 58 HRC, flat edge, lower guard branch and full-length lightening release.

The Forprene handle with locking by threaded tang makes the knife solid and well balanced.

The MOLLE compatible sheath is made of shockproof nylon with a system that avoids shaking noises, is equipped with a two-button safety flap, a thigh with anti-rotation rubber reinforcement and a reversible ambidextrous 2nd level retention system: the simple pressure on the trigger unlocks the blade.

Intended use: Tactical / Backup

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: Mil-C-13924 burnishing
Handle: Forprene
Blade length: 128mm.
Blade thickness: 6.3mm.
Total length: 258mm.
Weight: 273g.
Sheath: Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

On December 19, 1941, in Eluet El Asel, about 400 men from the 1st Royal Carabinieri Battalion Paratrooper faced the assault of 4 battalions of Indian troops of the British Army. Jumping from their trenches by launching improvised devices, the "Desert Lions", as Radio London called them, made the defensive line impenetrable by allowing thousands of Italian-German troops to withdraw safely. This was the first page in the long history of Italian paratroopers.

The Tuscania Paratrooper Regiment asked that the Extra Ratio T911 be specifically made as a commemorative knife for its 80th anniversary.

The T911 is a medium-sized folding light and designed for professional use by military operators. It is equipped with a modified spear point blade, flat edge, in Bohler N690 cobalt steel heat-treated to a hardness of 58 HRC, for the best compromise between strength, ease of regrinding and thread hold. The blade is 76 mm long, 4 mm thick, has a stone washed finish and rotates around an adjustable pin which allows to obtain the best fluidity in opening. A brace allows you to lock the pin in the best position.

The handle is in Anticorodal aluminum alloy with high strength black anodized finish and is milled to facilitate the transition from "reverse grip" handle to saber handle.

The blade is opened by means of a pin operated with the thumb. The knife uses a liner lock type blade lock and a safe ensures maximum hold even during heavy use. The safety lever is colored red for better visibility and engages in an advanced position for more instinctive use.

In the handle are integrated a seat belt cutter with easily available and replaceable cutter-type blade, a tungsten glass breaker, a stainless steel knot loosener and a screwdriver for adjusting the pointing optics, in AISI 420 steel. The clip , reversible and fixed at the end of the handle, allows a very deep port in the pocket, for less visibility.

The knife can be dismantled for cleaning and maintenance. With a total length of 194 mm and a weight of 145g, the T911 is easy to wear both in uniform and in civilian clothes.

Intended use: Tactical / Emergency

Type of production: Industrial
Lama production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: Anticorodal
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 194mm.
Thick when closed: 24mm.
Weight: 145g.
Closing: Liner Lock
Clip: Stainless steel
Packaging: black cardboard box with Extrema Ratio logos
Notes: belt cutter, glass breaker, screwdriver for optics, stainless steel knot loosers

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

FULCRUM C model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.

FULCRUM C is the compact version of FULCRUM, it maintains all the characteristics of solidity and robustness and, thanks to the reduced dimensions of the blade (only 110 mm) and the handle, it is easily portable and concealable. The rigid sheath can be positioned horizontally, vertically or in a 45 ° inclined position. The only safety of the sheath is automatic with extraction and re-insertion by pressure, this detail makes it an intuitive and extremely fast tool, particularly suitable for emergency use and for personal defense.

Use: backup knife
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade thickness: 6.3 mm.
Blade length: 90 mm.
Total length: 210 mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 210g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SHRAPNEL OG model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.

SHRAPNEL OG is a truly multi-purpose "back-up", with strong combat attitudes. The leaf blade is characterized by a wide flat winding, with a narrow sharpening angle which makes it particularly sharp. The rigid sheath can be positioned horizontally, vertically or inclined at 45 °. The SHRAPNEL OG is produced without the top guard.

Use: tactical, sports, hiking, collection

Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 190g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

RESOLZA, a term of ancient origin, is today one of the most famous traditional knives of our country. The name suggests the razor by chance.

It was born in Sardinia centuries ago and has accompanied its inhabitants until today in the daily work of a peasant and pastoral life, following them even when its men were called to war. The chronicles of the Sassari Brigade during the First World War cite this knife among its soldiers' equipment.

We wanted to make a tribute by revisiting it according to our canons, without wanting to hurt any of the prestigious Sardinian artisans who still today pass on the tradition and wisdom of their ancestors. The dimensions and proportions are the original ones of a 10 cm blade, but the materials and technologies are those of our production. The handle revised in our style, the blade most faithful to tradition. In addition to the original, it has the blade lock open.

Intended use: sports

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal
Blade length: 100mm.
Blade thickness: 3mm.
Total length: 220mm.
Weight: 65g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: blade with MIL-C 13924 burnishing

Helmsman is a knife designed and perfected in every single detail for its primary use in a nautical environment and represents the evolution of the BF2 V model presented on the Amerigo Vespucci School Ship in 2013 and dedicated to the most beautiful ship in the world.

The blade, which reaches a length of 87 mm, has a serration at the base while the tip has a flat grinding that allows symmetrical cutting work with wider support while the stone washed finishing process preserves more from corrosion in a marine environment.

Intended use: Sports / Tactical / For Sailing Boat

Type of production: industrial
Blade: N690Co 58HRC stainless steel with Stone Washed finish
Country of production: Italy
Handle: Anticorodal with stainless steel reinforcements
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 210mm.
Weight: 143g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Notes: ankle band / loose knots - small shackle - Tactical quick release hanger - Safety catch with open knife - Safety ankle fastener / Knot release

Intended use: Tactical / Multirole

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Extrema Ratio developed the first knife of a new production line, called CONTACT.

It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.

The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.

The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.

The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.

so be used as glass breakers

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

Intended use: Emergency and survival multi-purpose knife

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: Testudo burnishing
Handle: anticorodal anodized aluminum
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length 8 cm) - window breaker - 2013 model now out of production

Born from the revisitation of the 39-09 model, the Nimbus was developed and chosen by the 183rd "Nembo" Paratrooper Regiment as a commemorative knife of the events of Case Grizzano which on 19 April 1945 saw the Nembo paratroopers engaged against the paratroopers of a German division . The clashes raged for 12 hours and were often resolved by hand-to-hand combat with the white weapon. A few days after the end of the Second World War one third of the battalion's men remained on the field, but their sacrifice led to the conquest of the battle. The knife in addition to wanting to commemorate an important event of our Armed Forces is the result of a development that has been carefully studied also in the technical aspects, so as to make it suitable for a concrete operational use.

Particular attention has been paid to taking care of the dimensions, the shape and the search for solutions such as the kydex sheath, which is designed to make the knife an instrument capable of adapting to the most complex requirements of the port.

The light and compact blade meets the demands of a modern tactical knife today.

Intended use: Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin finish
Handle: Wood
Blade length: 141mm.
Blade thickness: 5mm.
Total length: 263mm.
Weight: 203g.
Sheath: in Leather
Packaging: display case
Notes: -

Dedicated to those who are more at ease with a knife with a more classic profile, the VENOM is characterized by a wide, flat main grind.

Less suitable for combat, it is best expressed in field and precision work (thanks to the lower angle of sharpening).

It is a multirole of great utility in hunting and outdoor sports. The profile and the general outline of the blade are inspired by the Italian and Austro / Hungarian battle blades of the first half of the 20th century.

 
Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balancing: on the guard branch
Weight: 300g.
Sheath: thigh, in nylon, with rigid polymer insert
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Intended use: Tactical

Type of production: Industrial
Lama production: Italy
Blade: N690Co 58HRC stainless steel
Lama treatment: Satin
Handle: Anticorodal
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 128mm.
Total length: 224mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Intended use: Tactical / Military

Type of production: Industrial
Lama production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 157mm.
Blade thickness: 6.3mm.
Total length: 287mm.
Weight: 289g.
Sheath: tactical, cordura, compatible with M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Notes: A blade dedicated to those who love taking care of style and details ... without sacrificing the typical Extrema Ratio performance

The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.

Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.

Today, on the occasion of the centenary, we recall this important page of Italian military history with a limited celebratory series in only 100 numbered copies. This version has a satin blade and a walnut wood handle and is sold with a wooden box and leather sheath.

Intended use: Tactical / Military / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin
Handle: Walnut wood
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: leather thigh-strap
Packaging: wooden box
Notes: Limited edition in 100 numbered copies - Edition to celebrate the hundred years of the Italian Arditi

Purpose of use: Collection / Sportsman

Type of production: Sprint Run, Industrial, Open Number
Country of production: Prato - Italy
Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
Blade treatment: chemical detection
Handle: Anodized aluminum anticorodal
Blade Length: 70mm.
Blade thickness: 2.5mm.
Closed length: 99mm.
Total Length: 168mm.
Closure thickness: 11mm.
Weight: 84g.
Opening: ambidextrous opening pin
Washers: in fiberglass
Closure: Liner Lock
Clip: stainless steel, deep pocket, removable and reversible
Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

ABOUT THE STEEL

More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.

Purpose of use: Collection / Sportsman

Type of production: Sprint Run, Industrial, Open Number
Country of production: Prato - Italy
Blade: Coreless Steel VG10 / VG2 61HRC made in Japan by Takefu Steel
Blade treatment: chemical detection
Handle: Anodized aluminum anticorodal
Blade Length: 70mm.
Blade thickness: 2.5mm.
Closed length: 99mm.
Total Length: 168mm.
Closure thickness: 11mm.
Weight: 84g.
Opening: ambidextrous opening pin
Washers: in fiberglass
Closure: Liner Lock
Clip: stainless steel, deep pocket, removable and reversible
Packing: Cardboard box with Extrema Ratio logos - Numbered guarantee certificate
Notes: Limited edition - Each specimen is numbered on the grip and on the internal warranty certificate - Exclusive Product of Coltelleria Collini

ABOUT THE STEEL

More than just a damask, Coreless steel made by Japanese Takefu Steel comes with over 70 layers of VG10 and VG2 stainless steel welded, forged and coated between them so that you can form a lightweight, slim and durable blade with a spectacular damask outer pattern.

The peculiarity of Coreless steel, unlike conventional rolled steel or Japanese San-Mai, is that it does not have a hard core steel that is used for the cutting edge but has both the VG10 and VG2 steels arranged to form the cutting edge so alternating and sequential to each other.

This particular construction gives the blade - compared to the two steels that make it, individually taken - greater resistance to oxidation, higher surface hardness (up to 61.5HRC), 25% more than cutting capacity, 25% more than the wire hold capacity and 25% more resilience making the blade more robust and less subject to breakage.

Thanks to this latest steel, Takefu Steel has been rewarded on Japanese territory for research and development and innovation in the cutting-edge landscape. Coreless steel has already been chosen by major brands such as Kai and Mcusta Zanmai who since 2017 proposed it on their top productions of professional kitchen knives.

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade treatment: MIL-C-13924 grinding
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 146g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade treatment: MIL-C-13924 grinding
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 140g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 146g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Combat version of the Scout model with ultra-slim shape. The 118 mm blade is lightened in its structure by the bloodstream. It is produced in two versions: with single guard and upper grip or, in the DG version, with double guard for a safer grip in the bushes. It comes with black Kydex sheath with attachment to the M.O.L.L.E. system.

Intended use: Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Overall length: 232mm.
Weight: 140g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)

Intended use: tactical / multi role

Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

Target: Tactical / Military / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade length: 206mm.
Blade thickness: 6.3mm.
Total length: 345mm.
Weight: 500g.
Sheath: Nylon
Packing: Cardboard box with Extrema Ratio logos
Notes: Modern Reflection of the Gerber B.M.F. Built between the 80's and 90's

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Total Length: 232mm.
Weight: 145g.
Sheath: Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Overall length: 217mm.
Weight: 141g.
Sheath: In Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Brush MIL-C-13924
Handle: Forprene
Blade Length: 118mm.
Blade thickness: 5mm.
Total Length: 232mm.
Weight: 145g.
Sheath: In Kydex, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Intended use: Hiking / Backup

Type of production: Industrial
Country of production: Italy
Blade: Stainless Steel Bohler N690Co at 58HRC
Blade Treatment: Brush MIL-C-13924
Handle: Forprene
Blade Length: 103mm.
Blade thickness: 5mm.
Overall length: 217mm.
Weight: 141g.
Sheath: In Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

Folding knife made upon specific requests of the department of the Italian Army 185 ° RAO ( Target Acquisition Regiment ) and is now included the eponymous department . The knife supplied differs from the calendar for the total lack of writings or logos on the blade.

Limited Edition RAO model characterized by a satin blade in Japanese rolled steel produced by Takefu Steel. to the central plate and the 420J2 (56 HRC) In the specific CoS it is used to 61,5HRC (Cobalt Special deemed superior mechanically by 25% compared to the already appreciated VG10) for the two side plates, in order to have a very high capacity cutting but at the same time a remarkable resilience and resistance to oxidation.
folding knife made upon specific requests of the Italian Department of the Army 185th RAO (Regiment Acquisition Objectives) and currently supplied to the homonymous department. The knife supplied differs from that only civil to the total lack of written or logos on the blade.

Intended Use: Military / Tactical

Type of production: Industrial
Production Lama: Italy
Blade: (San Mai) Japanese-rolled stainless steel with sharp CoS to 61,5HRC in cryogenic tempering
Lama Treatment: Testudo
Handle material: anticorodal 4.5mm
Blade length: 118mm.
Blade Thickness: 6.3mm.
Length closed: 142
Overall length: 261mm.
Balancing: -
Weight: 335g.
Closure: front modified lock - threaded safety pin
Clip: -
Sheath: tactical nylon by Vega with M.O.L.L.E. attacks suitable for both the closed knife that open - color BLACK
Notes: sharpening the included Diamond

Pack consists of 6 pieces of the model Sector 1

TACTICAL KNIVES MEET THE KITCHEN!

Extrema Ratio is delighted to apply the strict military standards to a range of professional kitchen knives.

The steel blade is the proven BOHLER N690, a steel enriched with chrome, vanadium, molybdenum and cobalt, hardened to the hardness of 58HRC. The handle is made of Forprene, an elastomer that is in the "NATO standard" for resistance to extreme conditions, and is completely removable from the blade; this makes possible a thorough cleaning and maintenance of the knife.

Sector 1 is a new table knife that Extrema Ratio has designed for everyday use, the handle engineering plastics military specification contains a blade made of pure Extrema Ratio durable style, ergonomic and extremely effective. Available individually in a cardboard box or in a cardboard special case of six pieces.

Intended use: Raw meat / vegetables / table

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel hardened 58HRC N690Co
Blade treatment: Satin
Handle: Forprene
Blade length: 40mm.
Blade thickness: 4mm. on the blade
Overall length: 165mm.
Weight: 70g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos
Note: Can also be used as a sports knife or collectibles

TACTICAL KNIVES MEET THE KITCHEN!
Extrema Ratio is delighted to apply the strict military standards to a range of professional kitchen knives.

The steel blade is the proven BOHLER N690, a steel enriched with chrome, vanadium, molybdenum and cobalt, hardened to the hardness of 58HRC. The handle is made of Forprene, an elastomer that is in the "NATO standard" for resistance to extreme conditions, and is completely removable from the blade; this makes possible a thorough cleaning and maintenance of the knife.

Kitchen Talon is a new table knife that Extrema Ratio has designed for everyday use, the handle engineering plastics military specification contains a blade made of pure Extrema Ratio durable style, ergonomic and extremely effective. Available in a cardboard special case of six pieces.

Intended use: Raw meat / vegetables / table

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel hardened 58HRC N690Co
Blade treatment: Satin
Handle: Forprene
Blade length: 80mm.
Blade thickness: 4mm. on the blade
Overall length: 200mm.
Weight: 72g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos
Note: Can also be used as a sports knife or collectibles

TACTICAL KNIVES MEET THE KITCHEN!
Extrema Ratio is delighted to apply the strict military standards to a range of professional kitchen knives.

The steel blade is the proven BOHLER N690, a steel enriched with chrome, vanadium, molybdenum and cobalt, hardened to the hardness of 58HRC. The handle is made of Forprene, an elastomer that is in the "NATO standard" for resistance to extreme conditions, and is completely removable from the blade; this makes possible a thorough cleaning and maintenance of the knife.

Sector 1 is a new table knife that Extrema Ratio has designed for everyday use, the handle engineering plastics military specification contains a blade made of pure Extrema Ratio durable style, ergonomic and extremely effective. Available individually in a cardboard box or in a cardboard special case of six pieces.

Intended use: Raw meat / vegetables / table

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel hardened 58HRC N690Co
Blade treatment: Satin
Handle: Forprene
Blade length: 40mm.
Blade thickness: 4mm. on the blade
Overall length: 165mm.
Weight: 70g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos
Note: Can also be used as a sports knife or collectibles

TACTICAL KNIVES MEET THE KITCHEN!
Extrema Ratio is delighted to apply the strict military standards to a range of professional kitchen knives.

The steel blade is the proven BOHLER N690, a steel enriched with chrome, vanadium, molybdenum and cobalt, hardened to the hardness of 58HRC. The handle is made of Forprene, an elastomer that is in the "NATO standard" for resistance to extreme conditions, and is completely removable from the blade; this makes possible a thorough cleaning and maintenance of the knife.

Sector 2 is a new table knife that Extrema Ratio has designed for everyday use, the handle engineering plastics military specification contains a blade made of pure Extrema Ratio durable style, ergonomic and extremely effective. Available individually in a cardboard box or in a cardboard special case of six pieces.

Intended use: Raw meat / vegetables / table

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel hardened 58HRC N690Co
Blade treatment: Satin
Handle: Forprene
Blade length: 72mm.
Blade thickness: 4mm. on the blade
Overall length: 195mm.
Weight: 79g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos
Note: Can also be used as a sports knife or collectibles

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

Collectors Edition with:

* Box of ABS branded laser
* Tactical Kydex scabbard and leather, handcrafted
* Attack Tek-Lok
* Lanyard black paracord with custom anodized titanium wire stop with slogans and Extrema Ratio Knives Collini

Only two specimens at our disposal: Number 4 of 100 and number 9 of 100

This is a Collini Cutlery Exclusive - Only available in 100 serialized pieces

Intended Use: collection / EDC / CQD
Type of production: industrial, Limited
Blade: N690 stainless steel in 58HRC with hollow ground fuller
Blade Treatment: Black Testudo
Blade Production: Italy
Handle: Titanium machined from solid.
Closing system: Frame Lock with swing and safe removable stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 190g.
Clips: stainless steel, reversible, deep pocket, tip up
Notes: Conical Skull Crasher engaged in the shank - Limited and serialized edition in only 100 pieces
Box: Cardboard, serialized, with Extrema Ratio and Coltelleria Collini logos

For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.

A First Production Run of 30 pieces has been made.

SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.

Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate

Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.

Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"

Clad Effect on Cutleries

Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.

Improved corrosion resistance　　　　
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.

Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.

Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..

Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.

Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.

Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.

The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.

Intended use: Sports

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 150mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 328mm.
Weight: 117g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.

Intended use: Sports

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 150mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 328mm.
Weight: 117g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Intended use: Tactical

Type of production: Industrial
Production Country: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: burnishing MIL-C-13924
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Overall length: 240mm.
Weight: 241g.
Sheath: ABS, with Tek-Lok type of coupling system
Packaging: cardboard box with Extrema Ratio logos
Notes: long-handled version of the model Shrapnel OG

Intended use: Tactical

Type of production: Industrial
Production Country: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: burnishing MIL-C-13924
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Overall length: 240mm.
Weight: 241g.
Sheath: ABS, with Tek-Lok type of coupling system
Packaging: cardboard box with Extrema Ratio logos
Notes: long-handled version of the model Shrapnel OG

Commissioned and officially adopted in 2002 by the famous 9th Regiment. Raiders "Col Moschin", this model expresses the quintessence of pure combat knife.

Inspired by daggers with asymmetric blade and straight handle but oriented Arditi, from which the Regiment traces its vestiges, it was reworked in a modern way.
The center of gravity is strong backlog, particularly the tip piercing. And 'light, handy and intuitive. Each new intruder receives one, and each new intruder is trained to use it.

All knives of this series have straight handles KRATON from ergonomic design whose shape and size favors besides a solid grip the rapid change of straight handle (Sabre Grip) to upside (Reverse Grip). An Allen screw stainless steel allows the campaign from disassembly for maintenance and lubrication of the through shank increasing the operational life of the knife.

The sheath and 'suitable all'aviolancio and underwater operations and amphibious and is' applicable to the belt or the accoutrements.

Intended Use: Collection / Tactical / Military

Production Country: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Black PVD
Handle: Removable Kraton
Blade length: 160mm.
Blade Thickness: 6.3mm.
Overall length: 290mm.
Balancing: backward, 1 cm. the branch of the lower guard
Weight: 265g.
Sheath: tactical modular, from thigh or belt, Nylon
Notes: Limited Edition with exhibitor in Plexyglass

With the T4000 C continues the purest series so Extrema Ratio, for lovers of the profile of Japanese blades that do not want to give up the accessories typically tactical as sheath and handle.

Intended use: Tactical / Backup

Type of production: Industrial
Production Country: Italy
Blade: stainless steel Bohler N690Co to 58HRC
Treatment blade: Browning MIL-C-13924
Handle: Forprene
Blade length: 174mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 304mm.
Thick when closed: -
Balancing: -
Weight: 264g.
Closing: -
Clip: -
Sheath: Nylon
Packaging: Cardboard box with logos Extrema Ratio
Notes: -

Extrema Ratio - Panther Designed Borut Kincl - knife
Knife collaboration between Extrema Ratio and Borut Kincl trainer official special forces Slovenes "ESD"
Intended use: Tactical / Military
Type of production: industry
Blade: stainless steel N690Co 58HRC
Production Lama: Italy
Handle: Anticorodal
Blade length: 95mm.
Blade Thickness: 3mm.
Length closed: 140mm.
Overall length: 235mm.
Balancing: -
Weight: 210g.
Lock: Liner Lock
Clip: reversible and removable stainless steel
Sheath: -
Notes: safety locks to open knife

** SOLD OUT - OUT OF STOCK AND OUT OF PRODUCTION ** 

This is a Collini Cutlery Exclusive - Only available in 100 serialized pieces

Intended Use: collection / EDC / CQD
Type of production: industrial, Limited
Blade: N690 stainless steel in 58HRC with hollow ground fuller
Blade Treatment: Black Testudo
Blade Production: Italy
Handle: Titanium machined from solid.
Closing system: Frame Lock with swing and safe removable stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 190g.
Clips: stainless steel, reversible, deep pocket, tip up
Notes: Conical Skull Crasher engaged in the shank - Limited and serialized edition in only 100 pieces
Box: Cardboard, serialized, with Extrema Ratio and Coltelleria Collini logos

The A.S.F.K. is a dagger is dedicated and acquired by the new Italian Army Special Forces Commando (COM.FO.SE). It recalls the tradition of the "Arditi" and bloody battles of the trenches marked by assaults with bayonets. The A.S.F.K. trench knife is a modern twist eith Böhler N690 steel blade, Forprene handles with fingers protection and skull crasher.

Intended use: Tactical / Collection

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Treatment blade: Testudo
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Balancing: back
Weight: 413g.
Sheath: Cordura, colored desert, MOLLE compatible
Packaging: cardboard box with logos Extrema Ratio
Notes: Included in command of the Italian Army Special Forces (COM.FO.SE.)

DOBERMANN IV Africa is a knife dedicated to professionals of the hunt.

The knife blade is stainless Böhler N690, the tested steel Austrian enriched with chromium, vanadium, molybdenum and cobalt whose characteristics are hardness, essential to achieve effective sharpening, and maintaining high characteristics of elasticity.

DOBERMANN Africa IV will be provided with two handles, a wooden santos rosewood and into Forprene. The user can change the handle with ease depending on the needs of the moment. The knife will also be provided with a leather sheath Italian manufacture, of a plate sharpener and a scioglinodi steel.

Intended Use: Hunting / Hiking / Collection

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel N690Co
Blade treatment: Satin
Handle: Wood Santos and / or Forprene
Blade length: 185mm.
Blade thickness: 6.3mm.
Overall length: 315mm.
Weight: 368g.
Sheath: Brown leather, hand-stitched, made in Italy
Packaging: Cardboard box with logos Extrema Ratio
Note: The package includes a diamond sharpener and one untie knots in stainless steel