Knife - Essential Tool for Camping, Outdoor Adventure and collection

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and CTS-204P
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - KVT Ball Bearing System

The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.

So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.

ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.

Sinkevich Folder Titanium - ZT0450 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 420HC stainless steel
Handle: Phenolic resin
Blade length: 102mm.
Blade thickness: 3.5mm.
Total length: 209mm.
Weight: 122g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

Purpose: Sport / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -