Knife - Essential Tool for Camping, Outdoor Adventure and collection

Intended use: training knife with rounded edge and tip

Type of production: industrial
Blade: stainless steel W 1.4028 - 55-56HRC
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 160mm.
Blade thickness: 4mm.
Total length: 290mm.
Balancing: advanced to 1cm from the guard branch
Weight: 296g. (378g. With scabbard)
sheath: in ABS
Note: -

Three Pianelle R-TPC20 - knife

Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.

Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle

This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.

Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.

Destination of use: collection

Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)

Weight: 140g.

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Zuava Cattle Polished R-ZVC19 - knife

Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Palmerino horn cattle PA2C20 two knives - knife

The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.

Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.

Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and Silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 76g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which our handcrafted products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 53g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 35g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Roman Ring with polished horn cattle R-RMC30A - knife

Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.

Intended Use: Collection

Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -

Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachment

Destination: Military/Tactic/Collection

Type of manufacturing: industrial
Blade: W 1.4116 inox
Blade Treatment: IDROGLIDER GOLD® Black
Made in: Italy
Handle: Nylon reinforced with fiber glass, PP and TPE
Blade Length: 160mm.
Blade Thickness: 4,5mm.
Total Length: 290mm.
Balancing: on knife's guard
Weight: 288g. (with sheath 534g.)
Sheath: cordura with thigh band
Note: -

Destination: training knife, rounded point and dull edge

Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers, REMOVABLE
Blade Length: 160mm.
Blade Thickness: 4mm.
Total Length: 290mm.
Balancing: toward the point, at 1 cm from knife guard
Weight: 314g. (474g. with sheath)
Sheath: cordura, with thigh band
Note: -

Destination: training knife, rounded point and dull edge

Type of manufacturing: industrial
Blade: stainless steel W 1.4116 - 55-56HRC
Blade Treatment: stonewash
Made in: Italy
Handle: polymers
Blade Length: 97mm.
Blade Thickness: 3,5mm.
Total Length: 202mm.
Balancing: on knife guard
Weight: 170g. (212g. with sheath)
Sheath: cordura
Note: -

Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Fiorentino Buffalo Silver Engraved R-FIB20A - knife

Craft knife regional product in Scarborough in use up to 800 in Tuscany.
The handle, in a single piece of horn, door foot in the characteristic ring round silver engraved.

Blade of carbon steel
Blade length: 8.5 cm
Blade thickness: 2.5 mm
Length open: 20 cm
Weight: 78 gr

Zuava Cattle Polished R-ZVC16 - knife

Craft knife regional product in Scarborough, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all work

Handle: polished horn cattle
Blade: Stainless 440A
Total length: 16 cm
Blade Length: 7,5 cm

Mac Knives - Sub Tekno Titanium - knife

Intended use: Underwater

Type of production: Industrial
Production Blade: Italy
Blade: Titanium beta
Treatment Lama: -
Handle material: PP TPE overmolded
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balance: -
Weight: 98g.
Closing: -
Clip: -
Sheath: ABS with rubber straps for fastening the calf
Packaging: Cardboard box with logos MAC
Notes:

Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).

The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.

Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand

In use for certain news until the first half of the 19th century in the Maremma area of ​​Tuscany and Lazio. Through finds from the criminological museum in Rome, he was seen among those knives delivered by the rioters of the criminal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to quell a revolt.

The full horn handle is embellished with longitudinal grooves.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 201mm.
Weight: 70g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The name clearly indicates the area of ​​origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

This slender-shaped knife with a curved handle derives from ancient models, used by the shepherds of Abruzzo.
Its adoption in the repertoire of knives manufactured in Scarperia (where the particular fold of the handle earned it the name of "hunchback") dates back to the end of the nineteenth century and took place without obvious changes compared to the original type, equipped with a simple spring and one piece bovine horn handle.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 200mm.
Weight: 60g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.
Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
Invia commenti
Riquadri laterali

Ronchetta Horn R-RVC17 - knife

Quaint old-fashioned knife, used in Valtellina especially for agricultural work in viticulture. Lightweight and easy to handle, has achieved perfect functionality, pocket comfortably.

Lama with particular sickle shape

Lama. 440 stainless steel,
Handle: made from a full horn tip
Total length 150 mm
Blade length: 65 mm
Sharp Hand

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 59-60HRC RWL 34
Blade treatment: blackwash
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Limited Edition 2019 numbered on the blade - Design by Sandro Martinelli and Marco Bellani

Intended use: training knife with rounded edge and tip

Type of production: industrial
Blade: 440 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 314g.
sheath: in cordura
Notes: Design by Sandro Martinelli and Marco Bellani

Brotzu horn 27cm - knife

Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz

Blade: 420 stainless steel
Handle: horn
Blade length: 120mm.
Total length: 270mm.
Weight: 102g.

WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.

Consigli Scarperia - Pattishall Brotzu horn 33cm - knife

Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz

Blade: 420 stainless steel
Handle: horn
Blade length: 150mm.
Total length: 330mm.
Weight: 180g.

WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.

The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.