Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

Released in 2023, the Stitch RAM-LOK debuted with the MSI (Microtech Standard issue) as the first Microtech blade equipped with its fantastic RAM-LOK technology. This rugged take on the sleeper latch features Microtech's distinctive stepped pattern, made famous by the Ultratech series of trigger switches.

The Microtech Stitch is a beautiful tactical collaboration between Tony Marfione and Sebastijan Berenji, AKA Borka. It takes Sebastijan's fantastic Stitch design and combines it with Tony's superb opening mechanisms to create one of the most beautiful manufacturing collaborations ever.

Intended Use: Tactical/Military

Production Type: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: Textured aluminum
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 217mm.
Thickness when closed:15mm.
Weight: 156g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione & Borka Blades

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: G10
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: Injection molded polymer
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 128g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

This is the “Dark Side” of the Blur. Like all Blurs, it features a large, slightly curved blade that is ideal for multitasking. The blade shape offers excellent cutting and piercing capabilities, and the high-performance 14C28N stainless steel offers corrosion resistance and hardness. The black Blur has a Cerakote-coated blade for corrosion resistance and a more attractive appearance.

Intended Use: Sporting/Tactical

Type of production: Industrial
Country of manufacture: USA
Blade: Sandvik 14C28N stainless steel
Blade treatment: Black Cerakote
Handle: 6061-T6 aircraft aluminum with non-slip insert
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 114mm.
Total length: 203mm.
Weight: 112g.
Closure: LinerLock
Clip: Removable and multi-position, made of Cerakote stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Design by Ken Onion - Assisted opening system on bronze washers

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual...in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Apocalyptic, Dual Tone
Handle: Aluminum Natural Clear
Blade Length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

Discover Made in USA quality and functionality with the Bel Air. When you open the knife, its smoothness is unmatched thanks to KVT ball bearings and DuraLock technology.

As for cutting, the steel of the MagnaCut blade maintains an exceptional edge, and the "reverse tanto" blade can handle the toughest challenges during daily carry. The BlackWash finish hides scratches from use and complements the aluminum handle grips. The slim profile makes it perfect for easy carrying, thanks in part to the reversible pocket clip.

Intended Use: Sporty

Production type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 62/64HRC steel
Blade treatment: Blackwash
Handle: Aluminum 6061-T6
Blade length: 76mm.
Blade thickness: 2.3mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 11mm.
Weight: 82g.
Opening: via ambidextrous pins, placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, Teflon-coated stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: Anodized aluminum
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed: 12.5mm.
Weight: 94g.
Opening: via ambidextrous pins placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.3mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 11.7mm.
Weight: 79g.
Opening: via ambidextrous pins placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel and G10
Blade length: 74mm.
Blade thickness: 3.1mm.
Length closed: 109mm.
Total length: 183mm.
Thickness when closed: 13mm.
Weight: 119g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: FrameLock
Clip: deep pocket, stainless steel, removable
Packaging: cardboard box with Kershaw logos
Notes: Opening via Carson-flipper system on KVT ball bearings

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: BlackWash
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 12.4mm.
Weight: 79g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opening via carson-flipper system on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Camp 10 is the ideal tool for the outdoors and for survival. The solid edge blade is made of 65Mn carbon tool steel which is characterized by its wear resistance. A black powder coating protects the steel and facilitates maintenance. The rubber-coated handle is super-durable and provides an extra-secure contoured grip. The handle has built-in hand protection and is perforated in both the front and back so you can attach a carrying lanyard to it. It features a black sheath with comfortable nylon straps.

Intended use: hard utility

Type of production: China industrial
Blade: 65Mn carbon steel
Blade treatment: Teflon coating
Handle: rubber
Blade length: 254mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 406mm.
Balance: advanced to 7.5cm.
Weight: 521g.
Closure: -
Clip: -
Sheath: Nylon GFN
Note:

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 84mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 190mm.
Weight: 108g.
Opening: KVT Bearings system
Washers: in reversible steel
Closure: Frame Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: in steel D2
Blade treatment: Stonewashed
Handle: G10 and Carbon Fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 187mm.
Thick when closed: 11mm.
Weight: 75g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closing: Sub Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Design by Sinkevich

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 206mm.
Thick when closed: 10.2mm.
Weight: 146g.
Opening: Carson Flipper system and SpeedSafe Assisted Opening
Washers: steel,
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Gray TiNi
Handle: Stainless steel with bead-blasted finish
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 10mm.
Weight: 127g.
Opening: through ambidextrous opening disc placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with Gray TiNi treatment
Packaging: Cardboard box with Kershaw logos
Notes: Design by Les George

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Matte Gray TiNi
Handle: Stainless steel with Matte Gray TiNi finish
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 94mm.
Total length: 178mm.
Thick when closed: 15mm.
Weight: 83g.
Opening: through ambidextrous opening pin placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed Brown PVD
Handle: Stainless steel with Stonewashed Brown PVD finish
Blade length: 7.6mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 182mm.
Thick when closed: 10.2mm.
Weight: 99g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: titanium carbo-nitride coating
Handle: G10 and carbon fiber with stainless steel frame
Blade length: 76mm.
Blade thickness: 2.8mm.
Closed length: 109mm.
Total length: 187mm.
Thick when closed: 9.9mm.
Weight: 62.4g.
Washers: in brass
Closure: Framelock
Clip: deep carry type, stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Carabiner / bottle opener integrated on the shank

Intended use: Sports / EDC

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Bead Blasted
Handle: Stainless steel with PVD treatment
Blade length: 47mm.
Blade thickness: 2.8mm.
Closed length: 96mm.
Total length: 140mm.
Thick when closed: 8.7mm.
Weight: 90g.
Opening: through ambidextrous thumstood
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: bottle opener and screwdriver

Intended use: Tactical

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Black Oxyde Blackwash
Handle: G10
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 203mm.
Thick when closed: 13.8mm.
Weight: 120g.
Opening: via removable Thumb Disk
Washers: in Teflon
Closure: Liner Lock
Clip: stainless steel, removable and reversible, 2 positions
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: Design by Les George

Intended use: sports

Type of production: Industrial
Country of production: China
Blade: 4Cr13 stainless steel
Blade treatment: Black Oxyde Blackwash
Handle: Stonewashed stainless steel
Blade length: 76mm.
Blade thickness: 2.8mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 9.8mm.
Weight: 92g.
Opening: Carson Flipper and SpeedSafe system
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, 3 positions
Sheath: -
Packaging: Cardboard box with Kershaw logos
Note: -

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. Emerson

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: China
Blade: 8Cr14MoV stainless steel
Blade treatment: Teflon coating
Handle: Stainless Steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 120mm.
Overall length: 210mm.
Thick when closed: 9.5mm.
Weight: 136g.
Closing: Framelock
Clip: removable, stainless steel
Notes: -

Intended use: Sports / EDC
Type of production: Industrial
Blade: 8Cr13MoV stainless steel
Blade treatment: Teflon coating
Production Lama: China
Handle: FRN Black
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 160mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: removable stainless steel teflon
Sheath: -
Notes: used as a bottle opener, and flat screwdriver

Intended use: Sports / EDC
Type of production: Industrial
Blade: 8Cr13MoV stainless steel
Blade treatment: Teflon coating
Production Lama: China
Handle: FRN Tan
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 160mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: removable stainless steel teflon
Sheath: -
Notes: used as a bottle opener, and flat screwdriver

Intended use: Tactical / EDC

Type of production: Industrial
Blade: 8Cr14MoV stainless steel
Blade treatment: Teflon
Production Country: China
Handle: G10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 188mm.
Weight: 114g.
Closing: Framelock
Clip: removable and reversible, stainless steel
Notes: Design by Ernie Emerson

Intended use: Sport / EDC
Type of production: industry
Blade: stainless steel 8Cr13MoV
Treatment Blade: Teflon coating
Production Lama: China
Handle: FRN
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 83mm.
Overall length: 143mm.
Balancing: -
Weight: 79g.
Closure: Back Lock
Clip: Removable stainless steel Teflon
Sheath: -
Notes: used as a bottle opener and flathead screwdriver

Intended use: Sport / Tactical / EDC

Type of production: industry
Blade: stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Production Lama: China
Handle: Stainless steel stonewashed and G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 165mm.
Balancing: -
Weight: 105g.
Closure: Frame Lock
Clip removable and multi, Teflon-coated stainless steel
Sheath: -
Notes: Design by Rick Hinderer

Recommended use: Barbecue, Vegetable, Raw Meat, Fish

Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked Fallkniven

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie Emerson

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie Emerson

Intended use: Tactical / EDC

Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Blade: Teflon
Production Lama: China
Handle: G10
Blade length: 76mm.
Blade Thickness: 3mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 107g.
Lock: Liner Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie Emerson

Intended Use: Tactical / Military / Hunting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995

Intended Use: Sport / Hunting / Military

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes: