Knife - Essential Tool for Camping, Outdoor Adventure and collection

Fallkniven - A1x Expedition Knife - SanMai CoS Steel - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

F-A1X-CP

€241.80

Only 1 left

Fallkniven - Idun knife NL5 - Laminated VG10 & Leather Rings - PRIVATE COLLECTION

Knife WITHDRAWN FROM PRIVATE COLLECTION

Origin: Withdrawn from a private owner, previously purchased
Condition: Overall in excellent condition
Commercial availability: Still in production
Sharpening: Factory edge
Blade marks: /
Handle marks: /
Box: /
Sheath: in excellent condition
Manuals, Certificates, and Warranty: /
Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

Intended use: Hunting / Light Utility
Production type: Industrial
Country of production: Sweden / Japan
Blade: Laminated VG10 stainless steel
Handle: Ox-Hide rings, guard and pommel in aluminum
Blade length: 100mm
Blade thickness: 5mm
Total length: 220mm
Weight: 170g
Sheath: Leather, with vertical belt loop
Packaging: -
Notes: previously purchased knife from a private collection

AP-F-NL5

€269.67

Only 1 left

Microtech - MSI RAM-LOK - Black PVD Plain M390 & Tan G10 Frag - 210-1 - Knife

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

MTK-210-1-FRGTTA

€344.26

Only 1 left

Rating:

100%

5

Fallkniven - NL5 Idun - VG10 Laminate & Leather Rings - PRIVATE COLLECTION - Knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition, with some minor signs of use.
* Commercially available: Still in production
* Sharpening: Factory sharpened, improvable
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: A few scratches on guard and pommel.
* Box: /
* Scabbard: Present, with a few small signs of wear.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who eat them, keeping them forever young and vital.

Intended Use: Hunting/Light Utility

Production type: Industrial
Country of manufacture: Sweden / Japan
Blade: stainless steel VG10 Rolled
Handle: Ox-Hide (oxhide) rings, aluminum guard and tang
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 170g.
Sheath: leather, with vertical belt loop
Packaging: -
Notes: previously purchased knife, from a private collection

F-NL5-CP

€0.00

Only 1 left

Out of stock

Microtech - MSI RAM-LOK - Apocalyptic Plain M390 & OD Green G10 - 210-10 - Knife

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 148g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

MTK-210-10-APFLGTOD

€286.89

Only 1 left

Out of stock

Microtech - MSI RAM-LOK Knife - Black PVD Plain M390 & Orange Polymer - 210T-1 - Knife

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black PVD
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated into tang

MTK-210T-1-PMOR

€245.90

Only 1 left

Out of stock

Microtech - Socom Elite Manual - Clip Black PVD Partial Serrated M390 & Black Aluminum - 160-2 - Knife

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black PVD
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

MTK-160-2-T

€418.03

Only 1 left

Out of stock

Fallkniven - TK1 knife - PRIVATE COLLECTION - Cocobolo - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

AP-F-TK1

€532.79

Only 1 left

Microtech - Socom Alpha Mini T-E Knife - Signature Series - Black DLC - Carbon Fiber - 114M DLCCFS - Knife

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

MTK-114M-1-DLCCFS

€490.98

Only 1 left

Microtech - Amphibian RAM-LOK Knife - Black PVD Plain M390 & Fluted OD Green G10 - 137RL-1 - Knife

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: G10 OD Green
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

MTK-137RL-1-FLGTOD

€385.25

Only 2 left

Out of stock

Microtech - Socom Bravo Mini - Manual Folding Knife - Tanto Plain M390 & Carbon Fiber - 261M-7 - Knife

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

MTK-261M-7-CFTI

€372.95

Only 1 left

Microtech - Amphibian RAM-LOK - Stonewashed Plain M390 & Fluted OD Green G10 - 137RL-10 - Knife

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: G10 OD Green
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

MTK-137RL-10-FLGTOD

€344.26

Only 2 left

Out of stock

Zero Tolerance - Hinderer Slicer - CPM-MagnaCut & Green Micarta - SPRINT RUN - ZT0562MIC - knife

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

ZT0562MIC

€311.48

Only 2 left

Zero Tolerance - Sinkevich Flipper - CPM-MagnaCut & Blue Carbon Fiber - SPRINT RUN - ZT0452CFBLUBLK - knife

Intended Use: Tactical / Military

Type of production: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade treatment: Stonewashed
Handle: Titanium and blue Carbon Fiber
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system

ZT0452BLUCF

€0.00

Only 1 left

Rating:

93%

4.7

Out of stock

Fallkniven - Phantom - Elmax & Desert Ironwood 40th Anniversary Set - Limited Edition - knife

Fällkniven AB celebrates its 40th anniversary in the international knife market with The Fällkniven Phantom model, a folding knife that is not only aesthetically appealing but also functional, with well-balanced proportions between handle and blade.

The blade uses advanced Swedish powdered steel (Elmax from Uddeholm), equipped with a convex edge for maximum performance. The handle is made of ironwood harvested in the southwestern United States, known for its density (1.2 kg/dm³) that makes it heavy and strong enough not to float.

The design of the Phantom follows the Scandinavian principle of "Form follows function," favoring clean, classic lines without superfluous details.

The Phantom comes in a gift box with a multifunctional leather case with a belt clip that can be worn either horizontally or vertically.

Intended use: sports/hunting/utility

Blade: 61/62HRC Elmax stainless steel, satin-finished, with convex sharpening
Handle: stainless steel and desert ironwood
Blade length: 73mm.
Blade thickness: 3mm.
Length when closed: 101mm.
Total length: 174mm.
Weight: 77g.
Locking system: Liner Lock
Sheath: leather, with metal clip
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard case

F-PHanniv

€381.15

Only 1 left

Out of stock

Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

F-F1anniv

€217.21

Only 1 left

Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

F-F1PRO-CP

€196.72

Only 1 left

Zero Tolerance - KVT Folder Knife - MagnaCut & Carbon Fiber - ZT0545 - Knife

The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.

Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.

Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.

The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings

ZT0545

€290.98

Only 1 left

Rating:

100%

5

Out of stock

Zero Tolerance - Sinkevich Folder - 0450BLUCF - Flipper Knife Blue CF - Knife

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

ZT0450BLUCF

€270.49

Only 2 left

Rating:

100%

5

Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

ZT0006BLK

€368.85

Only 2 left

Zero Tolerance - ZT0006 - CPM-3V - OD Green G10 - fixed blade, single edge knife, Made in USA

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

ZT0006

€327.05

Only 2 left

Zero Tolerance - Sinkevich - S35VN Red Blackwash - Factory Special Series - ZT0452RDBW - knife

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium Blackwash and Carbon Fiber Red and Black
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 125g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system - Limited Edition "Factory Special Series"

ZT0452RDBW

€327.05

Only 1 left

Rating:

100%

5

Out of stock

Zero Tolerance - Tim Galyean - Copper - Factory Special Series - ZT0022CU - knife

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

ZT0022CU

€266.39

Only 1 left

Fallkniven - F1x Utility Knife - Elmax Steel - knife

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

F-F1XElmax

€245.90

Only 1 left

Rating:

100%

5

Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

F-P3Gic

Special Price €180.33 Regular Price €196.72

Only 99 left

Fallkniven - RL1EY - Elforyn - Folding Knife

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -

F-RL1EY

Special Price €188.52 Regular Price €204.92

Only 99 left

Zero Tolerance - ZT0990 knife - CPM 20CV - Carbon Fiber - knife

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

ZT0990

€270.49

Only 3 left

Zero Tolerance - ZT0762 knife - CPM 20CV - Carbon Fiber - knife

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

ZT0762

€368.03

Only 1 left

Rating:

93%

4.7

Fallkniven - R2 Scout Survival - Elmax - knife

Intended use: Hiking / Utility

Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex type

F-R2Z-Scout

€163.93

Only 1 left

Out of stock

Fallkniven - RL1di knife - Desert Ironwood - knife

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

F-RL1DI

Special Price €188.52 Regular Price €204.92

Only 99 left

Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

ZT0308BLKTS

€381.15

Only 1 left

Rating:

93%

4.7

Out of stock

Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife

Intended Use: Hiking / Hunting / Collection

Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -

F-TF1Z

€299.18

Only 99 left

Out of stock

Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife

Intended use: Hiking / Hunting

Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -

F-TF2Z

€184.43

Only 1 left

Out of stock

Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife

The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.

If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

F-TH2Z

Special Price €135.25 Regular Price €147.54

Only 99 left

Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife

The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.

As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

F-TH1Z

Special Price €229.51 Regular Price €254.10

Only 99 left

Zero Tolerance - Flipper Frame Lock - Carbon Fiber - ZT0707 - knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

ZT0707

€282.79

Only 1 left

Zero Tolerance - ZT0235 - Jens Anso - Carbon Fiber SlipJoint - knife

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

ZT0235

€209.02

Only 1 left

Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

ZT0357BW

Special Price €0.00 Regular Price €187.70

Only 3 left

Zero Tolerance - SpeedSafe Flipper - Stone Washed - ZT0357 - knife

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

ZT0357

€176.23

Only 1 left

Out of stock

Zero Tolerance - Coyote Flipper Frame Lock - Titanium - ZT0308 - Knife

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

ZT0308

€356.56

Only 3 left

Rating:

93%

4.7

Zero Tolerance - ZT0230 - Jens Anso - Carbon Fiber SlipJoint - knife

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

ZT0230

€209.02

Only 1 left

Zero Tolerance - ZT0223 - Tim Galyean - Military Flipper - knife

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thick when closed: 14mm
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

ZT0223

€0.00

Only 1 left

Rating:

93%

4.7

Out of stock

Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

F-SK2L

Special Price €245.90 Regular Price €270.49

Only 99 left

Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

F-S1X

€229.51

Only 1 left

Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

F-S1XB

Special Price €233.61 Regular Price €258.20

Only 98 left

Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

F-A1XB

€356.56

Only 1 left

Fallkniven - A1x Expedition Knife - outdoor knife - knife

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

F-A1X

€319.67

Only 1 left

Rating:

99%

5

So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.

ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450's refined good looks.

Sinkevich Folder Titanium - ZT0450 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 111mm.
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 84g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing

ZT450

€237.70

Only 1 left

Rating:

100%

5

Zero Tolerance - Carbon Fiber Flipper Folder - ZT0770CF - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: Stainless Steel CPM-S35VN 59/61HRC
Treatment Llama: Stonewashed
Handle: Carbon Fibre
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Note: Opening system Speedsafe

ZT0770CF

€228.69

Only 1 left

Rating:

97%

4.9

Out of stock

Mac Coltellerie - 630 Training Knife - training knife

Intended use: training knife with rounded edge and tip

Type of production: industrial
Blade: stainless steel W 1.4028 - 55-56HRC
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 160mm.
Blade thickness: 4mm.
Total length: 290mm.
Balancing: advanced to 1cm from the guard branch
Weight: 296g. (378g. With scabbard)
sheath: in ABS
Note: -

11026

€36.89

Only 2 left

Mac Coltellerie Maniago knives, coltelli

Out of stock

Destinazione d'uso: sportivo/caccia/militare

Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:

F-S1BLZ

Special Price €172.13 Regular Price €187.70

Only 99 left

Rating:

93%

4.7

Fallkniven - A1 Zytel knife - coltello

Destinazione d'uso: sportivo/caccia/militare

Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:

F-A1Z

€209.02

Only 1 left

Fallkniven - A2 - knife

Survival knife - News from the Swedish company larger than the A1 model.

Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.

- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheath

F-A2

Special Price €336.07 Regular Price €368.85

Only 99 left

Rating:

100%

5

Fallkniven - NL1 - Thor - knife

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

F-NL1

Special Price €590.16 Regular Price €651.64

Only 99 left

Rating:

100%

5

Fallkniven - NL2 - Odin - knife

The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.

Intended Use: collection / Survival

Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:

F-NL2

Special Price €524.59 Regular Price €577.87

Only 99 left

Fallkniven - NL3 - Njord - knife

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

F-NL3

Special Price €422.13 Regular Price €463.11

Only 101 left

Rating:

100%

5

Fallkniven - NL4 - Frey - knife

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

F-NL4

Special Price €336.07 Regular Price €368.85

Only 100 left

Fallkniven - NL5 - Idun - knife

Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials

Intended Use: collection / Survival

Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:

F-NL5

Special Price €344.26 Regular Price €377.05

Only 99 left

Fallkniven - NL5cx - Idun Damasco - coltello

Destinazione d'uso: collezione/caccia

Tipo di produzione: industriale
Lama: in acciaio damasco "Cowry-X" 64HRC
(3%C 20%Cr 1%Mo 0.3%V)
Trattamento Lama: -
Manicatura: anelli di cuoio con guardia e cap in nickel silver
Lunghezza lama: 100mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: cucito a mano, in cuoio
Note: -

F-NL5CX

Special Price €1,405.74 Regular Price €1,545.08

Only 99 left

Fallkniven - TK3ic knife - Cocobolo - coltello

Fallkniven Tre Kronor TK3

La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.

Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Manicatura: Legno di Cocobolo
Lunghezza lama: 70 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 165 mm.
Peso: 100 g.
Chiusura: Backlock
Fodero: Nero, in cordura

F-TK3ic

Special Price €254.10 Regular Price €278.69

Only 99 left

Microtech - Socom Elite - Manual Folding Knife - Tanto Stonewashed M390 Turquoise - 161-10 - Knife

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

MTK-161-10TQ

€368.85

Only 0 left

Out of stock

Microtech - Stitch RAM-LOK - Manual Folding Knife - Black Spearpoint M390 & OD Green Fluted Alluminium - 169RL-1 - Knife

Released in 2023, the Stitch RAM-LOK debuted with the MSI (Microtech Standard issue) as the first Microtech blade equipped with its fantastic RAM-LOK technology. This rugged take on the sleeper latch features Microtech's distinctive stepped pattern, made famous by the Ultratech series of trigger switches.

The Microtech Stitch is a beautiful tactical collaboration between Tony Marfione and Sebastijan Berenji, AKA Borka. It takes Sebastijan's fantastic Stitch design and combines it with Tony's superb opening mechanisms to create one of the most beautiful manufacturing collaborations ever.

Intended Use: Tactical/Military

Production Type: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black PVD
Handle: Textured aluminum
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 217mm.
Thickness when closed:15mm.
Weight: 156g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione & Borka Blades

MTK-169RL-1FLOD

€385.25

Only 0 left

Out of stock

Microtech - Amphibian RAM-LOK - Stonewash Plain M390 & Fluted Tan G10 - 137RL-10 - Knife

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: G10
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

MTK-137RL-10-FLGTTA

€344.26

Only 0 left

Out of stock

Microtech - MSI RAM-LOK - 30th Anniversary Limited Edition - Stonewashed Plain M390 & Black Polymer - 210T-10 - Knife

30th Anniversary Limited Edition with logo engraved on blade

From 30 years of relentless dedication comes the MSI® 30th Anniversary edition. This knife showcases the best of homegrown excellence. Every detail, from materials to finish, has been carefully crafted to reflect our deep-rooted passion for precision and quality. Crafted with care and expertise, this blade is a testament to our heritage, where American craftsmanship meets unparalleled innovation

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: Injection molded polymer
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 128g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: Limited edition commemorating Microtech's 30 years in business with 30th Anniversary logo engraved on the blade

MTK-210T-PMBK30

€217.21

Only 0 left

Out of stock

The brands dealt with by Coltelleria Collini

Knife - Essential Tool for Camping, Outdoor Adventure and collection

Do you need help?

Coltelleria Collini