Knife - Essential Tool for Camping, Outdoor Adventure and collection
-
Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife
Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box.
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratoryThis Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.
The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.
Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.
Intended Use: Tactical/Military
Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl HarborKB-02-1241-CP€286.07Only 1 leftOnly 1 left
-
Bark River - Ultralite Field Knife - CPM-3V & Desert Ironwood Root #5 - PRIVATE COLLECTION - knife
PREVIOUSLY PURCHASED KNIFE, RETRIEVED FROM PRIVATE COLLECTION
* Type: previously purchased knife, from a private collection
* Condition: "First Production Run" edition, like new, never used, never removed from the packaging, and never placed in the sheath
* Available on the market: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: Present, also includes a second new leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratoryThe Bark River Ultra Lite Field Knife is a versatile knife designed to excel in bushcraft activities but capable of handling many other functions. Its clip/harpoon blade is made of CPM 3V steel, offering excellent resistance and holds its edge well, making it ideal for processing game and food preparation. However, it is important to protect it from moisture and acids, as it is not completely stainless; regular maintenance, such as cleaning and applying oil, is recommended to preserve its quality.
The handle is made from a wonderful desert ironwood burl, a precious wood that has a unique and variable appearance. Each handle is different, reflecting the value of the natural product. The entire design of the knife makes it an excellent tool for both practical use and for those seeking a distinctive item.
Intended use: Hiking / Utility / Bushcraft
Country of production: USA
Blade: full tang made of CPM-3V carbon steel at 61HRC
Handle: desert ironwood burl
Blade length: 115mm.
Blade thickness: 3.2mm.
Total length: 213mm.
Weight: 125g.
Sheath: leather
Notes: knife from a private collection, like new, never removed from its packaging and never placed in the sheath - Out of production and no longer available on the market, differs from the standard production by the use of burl wood for the handle - "First Production Run" engraved on the bladeBR-UFK3V-CP€425.41Only 1 leftOnly 1 left
-
Bark River - Aurora II - CPM-3V & Desert Ironwood #2 - PRIVATE COLLECTION - knife
PREVIOUSLY PURCHASED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new, never used, never removed from its packaging, and never inserted in the sheath
* Availability: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present
* Sheath: Present, with an additional new leather sheath
* Manuals, Certificates, and Warranties: Present
* Inspected and Certified by our internal laboratoryThe Bark River Aurora II is designed as the ultimate bushcraft knife, a result of extensive testing conducted by experts in North America and Europe. This outdoor knife, perfected through feedback received, is notable for its balance and versatility. The blade, made of CPM 3V steel, is renowned for its exceptional strength and its ability to retain an excellent edge over time. However, it is important to watch for moisture and acids, as CPM 3V is not completely stainless. Cleaning the knife after use and occasionally applying oil is recommended to ensure its longevity.
The Aurora II, significantly larger than the standard model, features a pointed tip ideal for detailed tasks and a spine suited for use with a fire starter. These characteristics make it an indispensable tool for outdoor activities.
The handle is made of desert ironwood, a hardwood appreciated for its color and unique pattern, giving the knife a luxurious look and improving grip. Each piece is handmade by Bark River, meaning that every knife is unique and may have slight variations compared to the images.
Intended Use: Hiking / Utility / Bushcraft
Country of Manufacture: USA
Blade: Full tang in CPM-3V carbon steel at 61 HRC
Handle: Desert ironwood
Blade Length: 140mm.
Blade Thickness: 3.85mm.
Total Length: 264mm.
Weight: 195g.
Sheath: Leather, with an additional leather sheath
Notes: Knife from a private collection, like new, never removed from its packaging and never inserted in the sheath, provided with an additional sheath, out of production and no longer available on the marketBR-AUII3V-CP€409.02Only 1 leftOnly 1 left -
Ka-Bar - Desert Storm U.S. Army Fighting Knife - 9151 - PRIVATE COLLECTION - knife
USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratoryAt 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.
In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.
Intended use: Tactical/Military
Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer availableKB-9151-CP€163.11Only 1 leftOnly 1 left -
Ka-Bar - Modified Tanto Fixed Blade Knife - 1266 - Kydex Sheath - knife
Intended use: Tactical / Military / Collection
Intended use: Tactical / Military / Collection
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logosCollini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-1266€118.85Only 2 leftOnly 2 left -
Ka-Bar - U.S. ARMY - Fighting Knife - 1219 - knife
Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
Intended use: Tactical / Military
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1219€122.95Only 3 leftOnly 3 left -
Ka-Bar - USMC Commemorative Presentation Grade Fighting Knife - 1215 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / MilitaryBlade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1215€286.07Only 2 leftOnly 2 left -
Ka-Bar - USMC Black short knife - 02-1258 - Kydex Sheath - knife
Intended use: Tactical / Military / Collection
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
CommunityKB-1258€86.07Only 1 leftOnly 1 left -
Ka-Bar - USMC 9169 Commemorative Afghanistan Fighting Knife - knife
The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.
Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -KB-9169€131.15Only 2 leftOnly 2 left -
ExtremaRatio - SERE 2 - GOI Gruppo Operativo Incursori - rescue knife
S.E.R.E. 2, adopted by the Operational Group of Italian Navy Incursors, is the development of the S.E.R.E. 1, created by a study group composed of Special Forces operators, martial artists and experts in survival techniques. This variant 2 has been revised according to the needs expressed by the Department.
The acronym S.E.R.E. refers to the four principles "Survival, Evasion, Resistance and Escape" which make up the training program provided to military personnel at high risk of capture.
The S.E.R.E. 2 is suitable for both tip and cut use. The unique grip, unlike the classic blades of this type, is fixed between the index and the middle, thus forming a single axis from the tip of the blade to the user's wrist, allowing its use also in reverse grip. The handle has the same ergonomics as the butt of a firearm; this grip allows an instinctive and immediate use, being able to easily integrate the training in the training activity.
The geometry of the tip ensures maximum penetration, at the same time its axial profile with a triangular base protects its resistance. The design of the blade has on one side a partially serrated profile to favor the cutting of cordages, and on the other hand a classic cut or straps that, unlike the previous model, has re-sharpening and interchangeable blades.
The central loop, which has the dual function of lightening and turn-crickets, recalls the maritime origins of its creators. The peculiarity of the knife is that it has been specifically designed to be used even without the handle; the two holes in the part dedicated to the handle facilitate assembly.
The kydex sheath has a basic retention that can be used alone for operators who need extremely fast knife use, and a removable locking lock if necessary. The knife is supplied with double safety for ambidextrous mounting. An insert with a flat-blade screwdriver is available as an accessory. Comes with belt clip for belt fastening and paracord for fixing on the M.O.L.L.E. system.
"Using the gun, knife or other weapon for us is the same thing: it's just the extension of the hand." Quote from a commander of the ward.
Intended use: Tactical / Military / RescueType of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade length: 148mm.
Blade thickness: 6.3mm.
Total length: 217mm.
Thickness when closed: -
Weight: 306g.
Sheath: In Kydex, with Tek-Lok hooking system
Packaging: Cardboard box with Extrema Ratio logos
Note: -ER-SERE2€360.66Only 1 leftOnly 1 left
Out of stock -
Extremaratio - Arditi Black - Single-edged dagger - knife
The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.
Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.
Today, on the occasion of the centenary, we remember this important page of Italian military history with a limited series of celebrations of 1918 copies. This version has a burnished blade, a polymer handle and a black cordura sheath.
Intended use: Tactical / Military / Collection
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Burnishing MIL-C-13924
Handle: Polymers
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: Nylon leg strap
Packaging: cardboard box with Extrema Ratio logos
Notes: Edition limited edition in 1918 copies - Edition to celebrate the hundred years of the Arditi of ItalyER-AR-BK€342.62Only 1 leftOnly 1 left -
Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife
Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife
Intended Use: collectionBlade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited EditionKB-9140€135.25Only 1 leftOnly 1 left -
ExtremaRatio - 185° RAO AVIO - knife
RAO ACQUIRED FROM VERSION 'AIR FORCE
Intended Use: Military / Tactical
Type of production: industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: testudo
Handle: non corroding 4.5mm
Blade length: 118mm.
Blade Thickness: 6.3mm.
Length closed: 142
Total length: 261mm.
Balance: -
Weight: 335g.
Closure: front lock changed - safety pin threaded
Clip: -
Pouch: Comes with a special survival kit that attaches to the knife sheath with MOLLE system
The kit contains whistle, compass, rope, flint, water purification tablets, chain saw, brass wire, torch, diamond sharpener.
One version is produced with black knife sheath and green.
The sheath is used only with the knife open.
Notes: logos departments on the bladeER-RAO-AV€0.00Only 1 leftOnly 1 leftOut of stock -
Ka-Bar - USMC Short - 02-1252 - knife
Ka-Bar - USMC Short - 02-1252 - knife
Intended use: Tactical / Military
Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -KB-1252€114.75Only 2 leftOnly 2 left -
Ka-Bar, USMC Fighting Knife, 1217, ka bar knife
Intended Use: Tactical / Military
Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -KB-1217€118.85Only 4 leftOnly 4 left -
Ka-Bar - USMC Iraqi Freedom - K-9128 - knife
A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.
Destination of use: collection
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative editionKB-9128€131.15Only 1 leftOnly 1 left -
ExtremaRatio - 185° RAO Desert Warfare - knife
RAO ACQUIRED FROM VERSION ' AIR FORCE
Folding knife made upon specific requests of the department of the Italian Army 185 ° RAO ( Target Acquisition Regiment ) and is now included the eponymous department . The knife supplied differs from the calendar for the total lack of writings or logos on the blade.
HISTORY ON THE DEPARTMENT :
The 185 ° RAO of the'' Thunderbolt '' and ' a department from the ancient tradition, but brand new . It was born April 3, 2000 following the reconfiguration of the 185 ° paratroopers land-based artillery regiment . Headquartered in Livorno, and ' a department atypical weapon of Artillery, currently placed in the basin of the Special Forces .
Composed entirely of volunteers , the 185 ° RAO selects its members through passing a physical test and a qualification course of modules '' in difficulty ' growing .'' The tasks assigned to the men of RAO are varied, but all delicate : it is to gather information on enemy targets and ' pass ' at his command . More 'in general , can' talk of '' reconnaissance '' in sensitive areas . '' E ' therefore obvious - underline the Army - that the activities ' of the buyer to occur mainly in hostile territory , in small groups acting on their own self-sufficient .''
The paratroopers of the RAO are specialists in the techniques of infiltration and exfiltration '' '' and are able to move into operational area '' up to 8-10 days without external supplies .'' '' They know how to evade capture , escape and escape from an ' area controlled by the enemy '' and, above all , as'' detect, determine and evaluate the objectives '' of strategic interest. Since 2002 , the year of reconfiguration , the detachments of the 185 th Regiment operated in all theaters of operation more ' hot : from the Balkans to Afghanistan, Iraq . Here performing reconnaissance especially for informational purposes in the medium and long-range surveillance of the area of responsibility ' of the Italian contingent .
Intended Use: Military / Tactical
Type of production : industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC Desert Warfare
Treatment Blade: GeoCamo
Handle : non corroding 4.5mm
Blade length: 118mm .
Blade Thickness: 6.3mm .
Length closed: 142
Total length: 261mm .
Balance: -
Weight: 335g .
Closure: front lock changed - safety pin threaded
Clip: -
Sheath: tactical nylon attacks by Vega Holster with MOLLE suitable for both closed and open the knife - colored desert
Notes: diamond sharpener includedER-RAO-DW€356.56Only 1 leftOnly 1 left -
Extremaratio - Arditi Black - Single Edge Dagger - PRIVATE COLLECTION - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition
* Commercially available: Still in catalog.
* Sharpening: Factory.
* Marks on blade: Marks and abrasions.
* Marks on handle: Small signs of wear and tear.
* Box: Present, not complete (absence of warranties and plastic bags).
* Scabbard: Present, in good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratoryIntended Use: Tactical/Military/Collection
Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Polymer
Blade Length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: Nylon thigh piece
Packaging: cardboard box with Extrema Ratio logos
Notes: Limited edition in 2018 pieces - Edition to celebrate 100 years of the Italian ArditesER-AR-BK-CP€0.00Only 0 leftOnly 0 leftOut of stock -
PDT - Pohl Force - Quebec Two - 2443 - D2 & G10 - PRIVATE COLLECTION by Floriano - knife
Exclusive product created in collaboration with the YouTube channel PDT - The Cutthroat's Park. This unique knife was actually used in a field test that you can view directly in this product sheet.
To make it even more special, we engraved Floriano's autograph and the PDT logo on the blade. The box of the knife was also autographed by Floriano making it a must-have collector's item.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: Floriano of the PDT Parchetto del Tagliagole.
* Condition: Overall in very good condition.
* Commercially available: Still in catalog.
* Sharpening: Factory sharpened, stropped by Floriano after use.
* Marks on blade: Imperceptible signs of concrete use.
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryTotal Length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard
Packaging: cardboard box, warranty certificate
Notes: knife used in a YouTube video review by Floriano of PDTPDT-PF2443-CP€0.00Only 0 leftOnly 0 left
Out of stock -
Ka-Bar - Vintage '80s - USMC Fighting Knife - 1217 - USATO - coltello
COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio internoIl KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzatoKB-US1217CP€0.00Only 0 leftOnly 0 left
Out of stock -
Ka-Bar - USMC Fighting Knife 125th Anniversary Special Edition - 9226 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for U.S. troops in World War II and since then its effectiveness has been universally recognized and employed in many other military scenarios. With this special edition, Ka-Bar celebrates the company's 125th anniversary.
Intended Use: Tactical/Military
Blade: 1095 carbon steel 56/58HRC
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: backward
Weight: 305g.
Sheath: leather
Notes: special edition to celebrate the company's 125th anniversaryKB-9226€135.25Only 0 leftOnly 0 leftOut of stock -
Pohl Force - Quebec Two Black TiNi - Limited Signature Edition - 2444S - knife
Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.
Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.
Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.
In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.
Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: titanium nitriding
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard
Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheathPF2444S€0.00Only 0 leftOnly 0 leftOut of stock -
Pohl Force - Quebec Two Stonewashed - Limited Signature Edition - 2443S - knife
Pohl Force's Quebec series is a classic mission knife that has been at the top of founder and designer Dietmar Pohl's wish list for many decades. In 2014, Pohl Force received exclusive permission from the original manufacturer to use the basic design for its interpretation.
Developed as the Ground Forces Combat & General Purpose Weapon, the multi-purpose knife was designed for the U.S. Marine Corps in the early 1950s. Although it was never officially introduced, it clearly demonstrated its capabilities in the Vietnam War, especially in the hands of American special forces. Almost 70 years after its first design, the modern Pohl Force interpretation of this classic represents the perfect fusion of old-school classic design and modern high-tech production.
Designer Dietmar Pohl has revised the design of the Quebec One and expanded the knife's range of functions. The blade of the new Quebec Two is now made of D2 steel instead of Sleipner, which brings higher levels of carbon and chromium, thus significantly improving cut and corrosion resistance. In addition, Dietmar Pohl has once again optimized the blade of the classic. The new version now has a 10 mm longer cutting edge and a secondary edge on the back.
In addition, the Pohl Force Prepper System has been integrated into the handle of the Quebec Two to safely store survival items inside the handle. A tool to open the handle screws is included. Pohl Force's new scabbard system allows for greatly increased use. The highly elaborate sheath, made of 2.5-mm-thick Kydex, with belt adapter and leg strap, allows for high carrying comfort. To attach it to the hand, the Quebec Two is equipped with a lanyard.
Total length: 315 millimeters
Blade length: 190 millimeters
Blade thickness: 6 mm
Weight: 380g
Blade material: D2 steel
Blade finish: stonewashed
Handle material: G-10
Handle thickness: 24 mm
Sheath: 2.5mm thick Kydex with Cordura belt hooks, removable
Accessories included: Lanyard
Packaging: Cardboard box, warranty certificate
Notes: Each knife is numbered and individually signed by DIetmar Pohl on the Kydex sheathPF2443S€0.00Only 0 leftOnly 0 leftOut of stock -
Ka-Bar - 6417 Red Spacer knife - 1095 steel - Special Edition - coltello
Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.
Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.
Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.
Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR
KB-6417€0.00Only 0 leftOnly 0 leftOut of stock -
Extremaratio - Arditi Deluxe - Single-edged dagger - Limited Collector's Edition - Knife
The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.
Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.
Today, on the occasion of the centenary, we recall this important page of Italian military history with a limited celebratory series in only 100 numbered copies. This version has a satin blade and a walnut wood handle and is sold with a wooden box and leather sheath.
Intended use: Tactical / Military / Collection
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin
Handle: Walnut wood
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: leather thigh-strap
Packaging: wooden box
Notes: Limited edition in 100 numbered copies - Edition to celebrate the hundred years of the Italian ArditiER-AR-D€0.00Only 0 leftOnly 0 leftOut of stock -
ExtremaRatio - 185 ° RAO in Sanmai Japanese steel - knife
Folding knife made upon specific requests of the department of the Italian Army 185 ° RAO ( Target Acquisition Regiment ) and is now included the eponymous department . The knife supplied differs from the calendar for the total lack of writings or logos on the blade.
Limited Edition RAO model characterized by a satin blade in Japanese rolled steel produced by Takefu Steel. to the central plate and the 420J2 (56 HRC) In the specific CoS it is used to 61,5HRC (Cobalt Special deemed superior mechanically by 25% compared to the already appreciated VG10) for the two side plates, in order to have a very high capacity cutting but at the same time a remarkable resilience and resistance to oxidation.
folding knife made upon specific requests of the Italian Department of the Army 185th RAO (Regiment Acquisition Objectives) and currently supplied to the homonymous department. The knife supplied differs from that only civil to the total lack of written or logos on the blade.
Intended Use: Military / TacticalType of production: Industrial
Production Lama: Italy
Blade: (San Mai) Japanese-rolled stainless steel with sharp CoS to 61,5HRC in cryogenic tempering
Lama Treatment: Testudo
Handle material: anticorodal 4.5mm
Blade length: 118mm.
Blade Thickness: 6.3mm.
Length closed: 142
Overall length: 261mm.
Balancing: -
Weight: 335g.
Closure: front modified lock - threaded safety pin
Clip: -
Sheath: tactical nylon by Vega with M.O.L.L.E. attacks suitable for both the closed knife that open - color BLACK
Notes: sharpening the included DiamondRAO-SANMAI€385.24Only 0 leftOnly 0 leftOut of stock -
Pohl Force - Quebec One Survival - 2044 - knives
With the Quebec One, Pohl Force has implemented a classic use knife that
has been high on the wish list of company founder Dietmar Pohl for more than 20 years. Finally Pohl Force has received exclusive permission of the original manufacturer to be able to use the basic design for its own interpretation. As a “Ground Forces Combat & General Purpose Weapon“ the knife was developed in the early ‚50’s for the U.S. Marine Corps.
Although never officially introduced, it was used in Vietnam -mainly in the hands of Special Forces units where it clearly demonstrated its capabilities. Pohl Force has now recreated 60 years later a modern interpretation of this classic knife which displays the optimal fusion of a classic old school design, with modern high- tech manufacturing.Overall length: 315 mm / 12.40 inches
Blade length : 193 mm / 7.59 inches
Blade thickness: 5.9 mm / 0.235 inch
Weight: 404 g
Blade steel: Sleipner
Blade finish: MilSpec coating
Handle material: G-10
Handle thickness: 24 mm / 0.94 inch
Sheath: Kydex® plus Adapter
Included accessories: LanyardPF2044€0.00Only 0 leftOnly 0 leftOut of stock -
Pohl Force - Quebec One Outdoor - 2043 - coltello
With the Quebec One, Pohl Force has implemented a classic use knife that
has been high on the wish list of company founder Dietmar Pohl for more than 20 years. Finally Pohl Force has received exclusive permission of the original manufacturer to be able to use the basic design for its own interpretation. As a “Ground Forces Combat & General Purpose Weapon“ the knife was developed in the early ‚50’s for the U.S. Marine Corps.
Although never officially introduced, it was used in Vietnam -mainly in the hands of Special Forces units where it clearly demonstrated its capabilities. Pohl Force has now recreated 60 years later a modern interpretation of this classic knife which displays the optimal fusion of a classic old school design, with modern high- tech manufacturing.Overall length: 315 mm / 12.40 inches
Blade length : 193 mm / 7.59 inches
Blade thickness: 5.9 mm / 0.235 inch
Weight: 404 g
Blade steel: Sleipner
Blade finish: MilSpec coating
Handle material: G-10
Handle thickness: 24 mm / 0.94 inch
Sheath: Kydex® plus Adapter
Included accessories: LanyardPF2043€0.00Only 0 leftOnly 0 leftOut of stock -
Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife
Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife
Intended use: collection
Blade: carbon steel 1095 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closure: -
Clip: -
Sheath: Leather
Notes: Limited Edition9164€106.56Out of stock -
ExtremaRatio - 185° RAO - 2018 Version - heavy folding knife
New version 2018 with improved grip: uses the same handle as the RAO II model
Folding knife made to specific requests of the Italian Army department 185 ° RAO (Regiment Acquisition Objectives) and currently supplied to the homonymous department. The supplied knife differs from the civil one only because of the total lack of writing or logos on the blade.
HISTORICAL SUMS ON THE DEPARTMENT:
The 185 ° RAO of the '' Folgore '' is a department with an ancient tradition, but very new. In fact, it was born on April 3, 2000 following the reconfiguration of the 185th terrestrial paratroop artillery regiment. Based in Livorno, it is an atypical department of the artillery weapon, currently inserted in the Special Forces basin.Entirely composed of voluntary personnel, the 185th RAO selects its components through the passing of a physical test and a qualification course on modules '' with increasing difficulty ''. The tasks entrusted to the RAO's men are many, but all very delicate: it is about gathering information on enemy objectives and 'passing them' to one's command. More generally, it can talk about '' recognition in sensitive areas ''. '' It is therefore evident - they stress to the Army - that the activity of the acquirer takes place mainly in hostile territory, in small self-sufficient nuclei that act in isolation ''.
RAO paratroopers are specialists in '' infiltration and exfiltration '' techniques and are able to move in the operating area '' for up to 8-10 days without external supplies ''. They know how to 'escape from capture, escape and escape from an' enemy controlled area '' and, above all, as '' identify, determine and evaluate objectives '' of strategic interest. Since 2002, the year of reconfiguration, the 185th Regiment detachments have operated in all the hottest operational theaters: from the Balkans to Afghanistan, to Iraq. Here they mainly carry out surveys for medium and long-range information purposes and for monitoring the area of responsibility of the Italian contingent.
Destination of use: military / tactical
Type of production: industrial
Lama production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: burnishing MIL-C 13924
Handle: 4.5mm anticorodal aluminum anodized
Blade length: 118mm.
Blade thickness: 6.3mm.
Length closed: 142mm.
Total length: 261mm.
Weight: 335g.
Closure: modified front lock with additional threaded security pin
Clip: absent
Sheath: tactical Nylon compatible M.O.L.L.E. suitable both for the closed and open knife
Notes: diamond pocket sharpener includedER-RAO-BK€340.16Only 0 leftOnly 0 left -
ExtremaRatio - First Course knife - GOI Operating Group Raiders - knife
Intended use: Collection / Tactical
Type of production: Semi-Industrial
Lama production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: MilSpec MIL-C-13924
Handle: Pressed leather and brass rings
Blade length: 175mm.
Blade thickness: 5mm.
Length closed: -
Total length: 291mm.
Thick when closed: -
Balancing: -
Weight: 398g.
Closing: -
Clip: -
Sheath: Leather, handmade
Packaging: Cardboard box with ExtremaRatio logos
Notes: Replica of the dagger distributed on the first course G.O.I. of 19524363€400.82Only 0 leftOnly 0 leftOut of stock
