Approved - knives withdrawn from private collections, checked, overhauled and certified by Coltelleria Collini

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: No longer available.
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Type of Production: Handcrafted
Country of Production: Canada
Blade: Stainless steel ATS-34
Blade finish: Dual tone: satin finish and microblading
Handle: titanium folders, carbon fiber bolsters and Desert Ironwood grips
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 190mm.
Thickness when closed: 14mm
Weight: 84g.
Closure: Liner Lock
Clip: flamed titanium
Notes: Canadian knifemaker Peter Marzitelli, began making knives full-time in 1984 under the name "Marz Knives." Considered an excellent knifemaker and artist specializing in handmade knives, Peter passed away at age 65 in May 2019. His motto was "A Marzitelli knife, is a knife for life."

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously purchased and used. 
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by Carryology

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049

* Type: Previously purchased and used
* Condition: Like new
* Commercially available: yes
* Sharpness: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Yes
* Sheath: /
* Manuals, Certificates and Warranties: yes
* Checked and Certified by our internal laboratory

Intended use: EDC / Sports

Type of production: Industrial
Country of manufacture: Taiwan
Blade: VG-10 stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 47mm.
Blade thickness: 1.7mm.
Total length: 115mm.
Weight: 31g.
Clip: titanium
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker

While we've seen plenty of Boker products over the years, resourceful knife makers continue to find ways to surprise us. For example, Brad Zinker from Florida with his Urban Trapper, one of the thinnest profile titanium framelocks we've ever experienced. With just 8mm grip thickness (without clip), the term "slim" only inadequately describes the Urban Trapper for its usable size.

The large holes and titanium transform the Urban Trapper into a real featherweight of just 48 g that can be carried extremely comfortably both in a suit pocket and in light summer trousers. Considering the overall minimalist design of the knife, the size of the flipper is equally reserved.

When used, it still impresses with its outstanding functionality and reliably opens the blade on VG-10 ball bearings. The blade shape of this classic trapper pocket knife, widely distributed in the United States and worn for many years by Brad Zinker, was the inspiration for this unusual piece.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, unused
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard:/
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 216mm.
Weight: 122g.
Closure: Back Lock
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: discontinued item, like new, from private collection

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: -
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: Taiwan
Blade: AUS-8 58HRC stainless steel
Blade Treatment: -
Handle: Zytel
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 205mm.
Closed thickness: 14mm.
Balancing: -
Weight: 152g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: -
Notes: Design by Joe Pardue

The SOG Winder II Heavy Duty Folding Knife (model SOG00009) exemplifies high quality and precision in knife making. With a blade length of 8.8 cm and a thickness of 4.7 mm, it is perfect for all kinds of tasks, providing excellent performance in cutting, slicing and piercing. The black textured Kraton handle provides an excellent grip, while the sturdy Lockback mechanism ensures safety during use.

The knife has an ambidextrous design, making it easy for both left- and right-handed people to use, and its compactness (11.4 cm when closed) makes it convenient to carry in a pocket or backpack. Made in Seki, Japan, a city with a long tradition of knife making, the Winder II is synonymous with high quality and craftsmanship.

Purchased in 1994 from the well-known Hoffritz cutlery chain in New York and now discontinued, it is a collector's item of great historical value. This knife, from a private collection, shows no signs of use, and is a prized piece for enthusiasts and collectors.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: In very good condition, with normal signs due to time
* Commercially available: 1994 knife - Discontinued model
* Sharpening: Factory.
* Marks on blade: Normal marks given by the opening and closing of the blade.
* Marks on handle: No.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Collection

Production Type: Industrial
Country of Production: Japan
Blade: stainless steel AUS-8
Blade finish: satin finish
Handle: stainless steel and kraton
Blade length: 88mm.
Blade thickness: 4.7mm.
Length closed: 114mm.
Total length: 205mm.
Weight: 220g.
Closure: back-Lock
Notes: previously purchased 1994 knife, discontinued, in excellent condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new, never taken out of the box
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete in every part.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

The largest of Klötzli's Gentleman series folding knives, with a beautifully shaped Michael Walker design enhanced by the uniqueness of maple wood briar.

It features all the most prized characteristics of Klötzli folding knives: refined polish, flawless movement, meticulous workmanship, and fine materials. The love of detail makes this knife a true gem.

Made entirely by hand in the Klötzli knife forge: a work of pure Swiss passion.

Intended Use: Collection

Type of production: MidTech
Country of manufacture: Switzerland
Blade: ATS-34 stainless steel
Blade finish: Satin finish
Handle: Titanium with maple burl inserts
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Weight: 89g.
Closure: LinerLock
Sheath: padded nappa leather
Packaging: cardboard box with Klotzli logos, warranty certificates
Notes: previously purchased knife from private collection

KNIFE FROM A PRIVATE COLLECTION

• Type: Knife previously purchased and withdrawn from a private collection
• Condition: Like new, never used
• Availability: Hard to find
• Sharpening: Factory edge
• Blade marks: None
• Handle marks: None
• Box: -
• Sheath: Perfect, never used, made of Kydex
• Manuals, Certificates, and Warranties: -

Checked and Certified by our internal laboratory

The Pohl Force Hornet XL Custom Edition 2009 is a high-quality tactical knife, the result of collaboration between Pohl Force and renowned American knifemaker Spencer A. Reiter. This limited edition of 500 numbered pieces offers a unique design and excellent performance, ideal for collectors and tactical knife enthusiasts.

• Intended Use: Collection, tactical use, and EDC (Everyday Carry)
• Production Type: Limited edition, industrial production with artisanal finishes
• Country of Origin: Germany
• Blade: D2 steel with Rockwell hardness of 60-61 HRC
• Blade Finish: Dual finish with polished bevels and cross-satin surface
• Handle: Micarta scales secured with Torx screws
• Blade Length: 85 mm
• Blade Thickness: 6 mm
• Overall Length: 185 mm
• Weight: 170 g
• Packaging: Collector's pouch with embroidered Pohl Force logo, hand-signed certificate of authenticity, exclusive velcro patch, Wilson Tactical lanyard in matching colors
• Notes: Includes a Kydex® sheath by Höppner & Schumann, compatible with Tek-Lok adapter for horizontal or vertical carry

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Type: 2016 knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from packaging
* Commercial availability: Difficult to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and complete, with outer box
* Sheath: -
* Manuals, Certificates, and Warranty: Present and complete
Inspected and Certified by our internal laboratory

SHIN in Japanese means ‘trust’.

The SHIN is one of the largest folders in the Rockstead catalog and showcases all the typical and characteristic elements of the brand: aluminum handle with a pearl-radiant design, hardened anodization at 400 Vickers, and an insert of high-quality stingray leather (Samekawa).

This is a durable knife with strong cutting capabilities that maintains its edge for a long time. Even when used for rigorous cuts, the blade glides securely thanks to its particular sharpening.

The blade indeed has a HONZUKURI sharpening, convex on both sides, following the tradition of Japanese swords; this makes it both very sharp and sturdy, allowing it to cleanly cut a sheet of paper even after 1000 cuts through a very abrasive and resistant hemp rope.

A faithful companion for life, in which to place the utmost trust.

Blade: laminated stainless steel ZDP189 at 67HRC internally and VG10 at 61.7HRC externally
Handle: samekawa (genuine stingray leather) and aerospace-grade aluminum A6063S with black alumite treatment at 400Hv hardness
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 145g.
Lock: linerlock type, made of 402J2 steel at 50HRC
Clip: removable, made of 402J2 steel at 50HRC, with black alumite treatment at 400Hv
Notes: complete with warranty certificate and technical specifications

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available: Unique specimen
* Sharpening: Original
* Marks on blade: /
* Marks on handle: /
* Packaging: /
* Scabbard: two handmade leather and kydex
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our in-house laboratory
 
Neanderth.Art is the project of cutler Dario Trifelli always looking for original and functional designs.

Intended use: hunting / collection
 
Type of production: artisan
Country of production: Italy
Blade: Becut steel
Blade finish: satin-finished
Handle: G10
Blade length: 80mm.
Blade thickness: 5.5mm.
Total length: 180mm.
Weight: 219g - 316g including leather sheath - 280g including kydex sheath
Sheath: two handmade leather and kydex
Packaging: /
Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: 2011 specimen, overall in very good condition.
* Commercially available: Still in catalog, but difficult to find.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: minimal marks given by time.
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: ZDP189 stainless steel at 66.3 HRC
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin 
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Specimen number #046 dated 07/13/2011, previously purchased, withdrawn from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition, with some signs of wear and tear. 
* Commercially available: Still in catalog, with current delivery time of about 5 yearsfrom order
* Sharpening: Factory.
* Marks on blade: None, but small signs of anodization discoloration on opening pin
* Marks on handle: Small abrasion marks on clip.
* Box: Present and complete
* Scabbard: Originally not included, original, purchased separately, but with visible signs of wear.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Type of manufacture: Midtech
Country of Production: USA
Blade: Stainless steel CPM-S35VN 58/59HRC
Blade treatment: stonewashed
Handle: titanium 6Al4V microbead blasted
Blade length: 92mm.
Blade thickness: 3.56mm.
Length closed: 123mm.
Total length: 212mm.
Thickness when closed: 19mm.
Weight: 140g.
Closure: Frame Lock
Clip: titanium, removable
Package: cardboard box with Chris Reeve logos, Warranty certificates, Microfiber cloth, Maintenance kit, leather pouch, additional set of brass washers, keys for maintenance and disassembly.
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: Minimal marks on left cheek piece.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: steel CPM-20CV 59/61HRC
Blade finish: satin finish
Handle: Black G10
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 101mm.
Total length: 186mm.
Weight: 102g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Absent
Notes: Previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private, previously purchased.
* Condition: Overall in good condition.
* Commercially available: Knife originally produced in 2014, currently discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: A few small marks given by time.
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 88mm.
Blade thickness: 3.2mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 80g.
Closure: Back Lock
Clip: Removable and reversible, stainless steel
Notes: design by Mike Vellenkamp

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in excellent, like-new condition
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Collection / Sporting

Production type: Midtech
Country of manufacture: Sakai - Japan
Blade: stainless steel ZDP-189 at 66.6 HRC
Blade finish: mirror polish
Handle: Duraluminum A7075 with anodization to Hv400 hardness and Samekawa insert (genuine Breed leather)
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 145g.
Opening: via ambidextrous pivot 
Washers: steel
Closure: FrameLock with hinge made of 420J2 at 52HRC
Clip: removable, 1mm 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: serial number 054 - Date of manufacture 23/04/2019

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratory

Intended Use: Collection/Gentleman

Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar Kressler

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Neckwear

Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left head

Rare knife produced by the Japanese Al-Mar around the 90s. Knife withdrawn from a private collection in like new condition - New knife with sheath and original box - Checked and certified by our in-house Coltelleria Collini laboratory.

Intended use: sports / collection
Type of production: industrial
Blade: AUS 8 stainless steel
Blade treatment: -
Lama production: Japan
Handle: micarta
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 195mm.
Weight: 117g.
Closing: -
Clip: -
Sheath: in leather
Notes: with original box

Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

Checked and certified by our internal laboratory - Collini Cutlery.

The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.

Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearings

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Sports / EDC

Type of production: Industrial
Blade production: USA
Blade: 420HC stainless steel
Handle: G-10
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 112mm.
Total length: 190mm.
Closed thickness: 11mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging:
Notes: Concave sharpening - opening via Carson Flipper system

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: original
* Marks on blade: No
* Marks on handle: No
* Box: present but not perfect
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Sports/Tactical

Type of production: Industrial
Blade production: Italy
Blade: D2 steel
Blade Treatment: -
Handle: G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed length: 108mm.
Total length: 190mm.
Closed thickness: 16mm.
Balancing: -
Weight: 108g.
Locking: TOL - Tactical Operation Lock
Clips: -
Sheath: -
Packaging: cardboard box with Lion Steel logos
Notes: Design by Max