Passion for knives

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Blade: Teflon coating
Handle: Stainless steel and FRN
Blade length: 89mm.
Blade thickness: 2.8mm.
Closed Length: 127mm.
Overall length: 216mm.
Thick when closed: 9mm.
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Balancing: -
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.

Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.

Destination of use: collection

Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)

Weight: 140g.

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: D2 steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 89mm.
Blade thickness: 2.8mm.
Closed Length: 127mm.
Overall length: 216mm.
Thick when closed: 9mm.
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: -
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Balancing: -
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Treatment Lama: Teflon
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Balancing: -
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

Intended use: EDC / Sports

Type of production: Industrial
Production Lama: Taiwan
Blade: D2 Steel
Handle: Stainless steel and FRN
Blade length: 74mm.
Blade thickness: 2.5mm.
Closed Length: 101mm.
Overall length: 176mm.
Thick when closed: 8mm.
Weight: 86g.
Closure: Frame Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with logos Randall's Adventure & Training
Notes: Design by Jeff Randall & Mike Perrin

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Destinazione d'uso: Tattico

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: CPM-3V Tool Steel
Trattamento Lama: Nitrurazione al titanio
Manicatura: G-10 con lavorazione 3D in colore Green + una coppia di guancette intercambiabili in G-10 in colore Black
Lunghezza lama: 80mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 227g.
Chiusura: -
Clip: -
Fodero: in Kydex, dotato di sistema opzionale e multiposizione PUP (Pals Universal Platform)
Confezione: Busta Trasparente
Note: Edizione Esclusiva e Limitata, non presente nei normali listini e cataloghi Strider, con loghi Monkey Edge incisi

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 53g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 35g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Roman Ring with polished horn cattle R-RMC30A - knife

Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.

Intended Use: Collection

Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade

Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).

The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.

Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand

In use for certain news until the first half of the 19th century in the Maremma area of ​​Tuscany and Lazio. Through finds from the criminological museum in Rome, he was seen among those knives delivered by the rioters of the criminal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to quell a revolt.

The full horn handle is embellished with longitudinal grooves.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 201mm.
Weight: 70g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The name clearly indicates the area of ​​origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

This slender-shaped knife with a curved handle derives from ancient models, used by the shepherds of Abruzzo.
Its adoption in the repertoire of knives manufactured in Scarperia (where the particular fold of the handle earned it the name of "hunchback") dates back to the end of the nineteenth century and took place without obvious changes compared to the original type, equipped with a simple spring and one piece bovine horn handle.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 200mm.
Weight: 60g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.
Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
Invia commenti
Riquadri laterali

Ronchetta Horn R-RVC17 - knife

Quaint old-fashioned knife, used in Valtellina especially for agricultural work in viticulture. Lightweight and easy to handle, has achieved perfect functionality, pocket comfortably.

Lama with particular sickle shape

Lama. 440 stainless steel,
Handle: made from a full horn tip
Total length 150 mm
Blade length: 65 mm
Sharp Hand

Brotzu horn 27cm - knife

Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz

Blade: 420 stainless steel
Handle: horn
Blade length: 120mm.
Total length: 270mm.
Weight: 102g.

WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.

Consigli Scarperia - Pattishall Brotzu horn 33cm - knife

Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz

Blade: 420 stainless steel
Handle: horn
Blade length: 150mm.
Total length: 330mm.
Weight: 180g.

WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.

Destinazione d'uso: Tattico / Collezione

Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 172g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -

Intended Use: Tactical

Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle material: G10 and titanium
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 203mm.
Thick when closed: 12mm.
Balance: -
Weight: 138g.
Closure: Frame Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: -

Intended use: sports

Type of production: Industrial
Lama production: USA
Blade: 1095 carbon steel
Treatment Lama: Textured powder coat
Handle: Green Canvas Micarta
Blade length: 137mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 277mm.
Thick when closed: -
Balancing: -
Weight: 448g
Closing: -
Clip: -
Sheath: in Kydex with additional clip for wearing at the belt
Packaging: Transparent plastic bag
Note: -

ATTENTION: the knife is sold without scabbard and without accessories

Intended use: Sports

Type of production: Industrial
Blade production: USA
Blade: 1095 carbon steel
Blade treatment: Green textured powder coat
Handle: Green Canvas Micarta
Blade length: 137mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 277mm.
Thick when closed: -
Balancing: -
Weight: 448g.
Closing: -
Clip: -
Sheath: not included
Packaging: Transparent plastic bag
Note: -

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio al carbonio 1095
Trattamento Lama: Textured powder coat Tan
Lunghezza lama: 55mm.
Spessore lama: 3mm.
Impugnatura: guancette in micarta opzionali, montabili all'occorrenza
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 40g.
Chiusura: -
Clip: -
Fodero: ABS e cordura
Confezione: Busta plastica trasparente

The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.