Year 2024

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

The Ulticlip AP Clip is a multipurpose clip designed to offer a variety of mounting options for holsters, scabbards and other accessories. This clip provides exceptional retention when used with 1.5" to 1.8" belts.

With the included adapter, it allows for belt-free wearing with moderate retention. The AP Clip's tuckable, discreet design maximizes comfort and concealment, making it ideal for everyday use.

Main features

Versatile Attachment: Compatible with belts from 1.5" to 1.8" and includes a belt-free port adapter.
Tuckable and Discreet Design: Allows you to hide holsters and accessories under clothing while maintaining comfort.
High Quality Materials: Made of spring steel wire with military grade black oxide finish for superior durability.
Easy Assembly: Supplied with long and short mounting blocks for flexible setup.

Technical specifications
Material: Spring steel wire with black oxide treatment.
Weight: 19.3g.

Included in the Kit:
- 2 x 0.95cm screws
- 2 x 0.63cm pins
- 2 x 0.25cm rubber washers
- Black zinc plating
- Standard/Phillips cap screw
- Open and slotted post

Screw Dimensions:
- Head diameter: 0.91 cm
- Post tube diameter: 0.51 cm
- 8-32 thread on all screws and pins

The UltiLink Complete Kit is a modular attachment system that allows you to quickly attach, remove and reattach holsters, springs, magazine pouches and other accessories. Ideal for those looking for flexibility in carrying their equipment including belts, vests, backpacks and other supports.

Main features

Modular Attachment: Allows quick transfer and attachment of various accessories, facilitating customization and adaptation of equipment.
Mounting Versatility: Offers 12 attachment angles for horizontal, vertical and diagonal transportation.
Components Included: The kit includes a composite and stainless steel block, two sprockets and mounting hardware compatible with belts, springs, holsters and other applications.

Contents of the Kit

- Sprockets, steel washers, 3/8" screws, 1/4" pins.
- Steel clip for sprockets.
- Rubber washers, 1/4" studs, 3/8" screws.
- 1/2" screw, 1/2" pin, steel washer.
- Slotted steel mounting plates.
- 20cm hook and loop fastening strap, 6.35cm non-slip backing.
- UltiLink lock.
- 3/8" flat head screws, 1/4" studs.

Ulticlip XL – Multipurpose Clip with Steel Closure for Holsters and Accessories

Ulticlip XL is the world's first multi-purpose clip for holsters, equipped with an innovative steel locking system. Designed to offer secure retention, Ulticlip XL allows you to attach holsters, knife sheaths or accessories both inside and outside the waistband (IWB/OWB).

Main features:

Secure Attachment: The steel closure guarantees a secure and stable attachment, keeping your accessories firmly in place during transport.
Removable Multipurpose: Includes different size screw wrenches (1/4", 5/16", 3/8") and a flat-blade screwdriver, providing a versatile solution for various uses.
Compatibility: Designed to work with belts up to 1.5" wide and .35" thick.
Sturdy Construction: Made of 1075 and 1050 spring steel with a military grade black oxide finish, heat treated to RC 42-49 for maximum durability.
Easy Assembly: Equipped with multiple holes for mounting, it adapts to different models of holsters and knife sheaths.

Technical specifications:

Material: Steel treated with wax/oil to prevent rust and ensure smooth operation.
Dimensions: 8.89cm x 2.22cm.
Weight: 38.85g.

Included in the Package: 6-piece screw kit, including screws, pins and rubber washers for secure and customizable mounting.

The UltiTuck combines three essential features in one clip, replacing most two-hole horizontal clips. Its innovation allows you to transform a traditional holster into a tuckable holster, offering a belt-free carry option thanks to the patented Ulticlip locking system. The clip features two T-shaped slots that allow for tilt adjustment and changing the width of the mounting holes from 1.52cm to 2.54cm.

Main features:

Tuckable Design: Innovative design that allows the shirt to be inserted over the holster.
Carry Without Belt: Patented system for safe transport without the use of a belt.
Adjustable Tilt: T-shaped slot for adjustable angle and different mounting widths.

Technical specifications:

Material: Clip 100% Made in USA, C-1075 steel, treated with wax/oil for smooth operation and as a rust inhibitor.
Finish: Military grade black oxide, heat treated to RC 42-49.
Dimensions: Width 3.81 cm, length 5.51 cm.
Weight: 22 grams.
Retention: Over 10x the retention than most holster clips.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

Practical, comfortable and innovative clip fixing system for knife sheaths or firearms.

Based on over a decade of experience, ULTICLIP has patented a new fastening system that offered ease of transport, high retention, concealment and positioning of the sheath in a practical and versatile way.

Technical specifications:

- Built for transport without belt
- 100% American
- Military grade Black Oxide Finish
- Heat treated on RC 42-49
- Spring steel C-1075
- Single slot mounting bracket
- Dimensions: 88mm x 20mm
- Weight: 20 gr.

Practical, comfortable and innovative clip fixing system for knife sheaths or firearms.

Based on over a decade of experience, ULTICLIP has patented a new fastening system that offered ease of transport, high retention, concealment and positioning of the sheath in a practical and versatile way.

Technical specifications:

- Built for transport without belt
- 100% American
- Military grade Black Oxide Finish
- Heat treated on RC 42-49
- Spring steel C-1075
- Single slot mounting bracket
- Dimensions: 85mm x 15mm
- Weight: 16 gr.

Practical, comfortable and innovative clip fixing system for knife sheaths or firearms.

Based on over a decade of experience, ULTICLIP has patented a new fixing system for holsters that offered ease of transport, high retention, concealment and positioning of the scabbard in a practical and versatile way.
Technical specifications:

- Built for transport without belt
- 100% American
- Military grade Black Oxide Finish
- Heat treated on RC 42-49
- Spring steel C-1075
- Single slot mounting bracket
- Dimensions: 56mm x 15mm
- Weight: 14 gr.

Professional Hair Clipper entirely "Made in USA" on the wire. Interchangeable heads, two-speed motor 35W.

Two speed motor: 2400 and 3000rpm incredibly quiet
Excellent cutting capacity
Very low vibration level
Head cut from 1.5mm stainless steel sharpened / ceramic
Quick release button of the cutting head
Wide assortment of interchangeable cutting heads (sold separately, compatible with spare parts Moser and Aesculap)
15ml tube of lube.
3 meters of electrical cable
Weight 360g. Dimensions 196x54x48mm

Great for professionals, good for individuals - Check guaranteed by our laboratory assistance and regrinding.

We recommend a constant lubrication chart using the oil supplied in the package to be applied on lamedopo each use.