Anno 2020

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Dress A Teddy

16 piece teddy bear and clothes icing & gum paste cutter set by Jem

16 piece sugarcraft set from Jem in South Africa interchangeable cutters for mummy, daddy and baby bears, bear faces plus clothes, pram, parasol, hats etc

- dress them any way you like

- food approved plastic

-  packed with instructions

- fine for sugarpaste icing, but even better with gum paste and flower modelling paste.

JEM - Baby-Nursery-themed sugarpaste cutters set - CAKE DESIGN - PROMO

Create delicious decorative designs with fondant or gum paste using these plastic cutters. Set includes: - 12 sugarcraft cutters. - 9 cutters: 2 baby, bottle, dummy, rocker, booties, bib, rattle, pram and baby face This wonderful set consists of a variety of different sitting babies, plus standing and crawling babies. It also has a variety of accessories i.e. nappy, babygrow, flower fairy dress, chef's hat, fairy party .

The cutters are made from plastic and come with instructions.

Perfect for christening, baby parties and first birthday cakes as well as fairy fantasy cakes.

Suitable for creating toppers on cakes and sides using gum paste

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Aurora - Professional hairdressing scissors.

Extra 45 stainless line.

Model 45 T.

Total length: 7 Inches (18.5 cm approx.).

Stainless steel AISI 420.

Hardening 55/58 Rockwell.

To ensure a perfect cut, Coltelleria Collini with its in-house sharpening laboratory, checks and overhauls every tool sold.

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Hunting / Hiking / Agriculture

Type of production: Industrial
Country of production: Italy
Blade: D2 steel at 59HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: Backward
Weight: 94 g.
Sheath: leather, ambidextrous, belt with horizontal port
Packaging: Cardboard box
Notes: Designed by Corey Sar Fox, Texan knifemaker who has lived in Italy for over 20 years

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

CORAVIN™ - Pivot™+ Premium Wine Storage System Set

The Pivot™+ system combines wine preservation with perfect oxygenation. Thanks to the special Pivot Aerator (included), an effect equal to 90 minutes of decantation can be obtained during the pouring, which will enhance the flavor and aroma of our wine. The remaining amount in the bottle can then be consumed over the next 4 weeks with the guarantee that the last glass will be as perfect as the first. Match the wine to your mood, the dinner courses or the weather, the choice is yours.

How to use Pivot

Open the bottle of wine.

Replace the cork or screw cap with a Pivot Stopper with the cork open (make sure the cork and bottle neck are both dry).

Pour the wine.

To pour, insert the Pivot device into the appropriate Stopper.

Pivot the bottle by bringing the spout onto the glass, then hold down the button on the device.

Release the button and return the bottle to an upright position to stop pouring.

Dimensions and weight

Height 3.5 in / 8.9 cm

Width 1 in / 2.54 cm

Length 7.75 in / 19.66 cm

Weight 0.3 lbs / 136 g

Materials device Pivot™ injection molded plastic, stainless steel, elastomers

Stopper Pivot™ injection molded plastic

Coravin Pure™ argon gas capsules Recyclable steel, 100% pure argon gas, synthetic rubber, fiberglass reinforced nylon.

Country of manufacture China

Set includes:

PIVOT DEVICE (1) The Pivot™ device together with Pivot™ Stoppers to pour and store wine for up to 4 weeks.

AERATOR PIVOT (1) The Aerator Pivot allows you to aerate wines in seconds directly during pouring. 

STOPPER PIVOT (2)Replace the cork or screw cap on your wine bottle with a StopperPivot™. 

UNIVERSAL BASE (1)Store your Coravin Three Pro or your Pivot Pro in this striking and durable base, made of zinc and finished with a brushed metal texture.

CORAVIN CAPSULES (8) Coravin Pure™ capsules contain pure argon gas and are manufactured and inspected to ensure the highest level of preservation without producing any impact on the taste of the wine.

JEM - Set sugarpaste cutters flowers and fruit theme - CAKE DESIGN - PROMO

Flowers are a symbol of love, beauty, joy and romance, and what better way to enjoy them than in sugar?

Sugar roses can be so realistic that they will mystify even the most experienced florist. Made from gum paste and petal powder, roses can come to life and become the perfect addition to any beautifully decorated cake, from a wedding cake to a birthday or anniversary cake. As well as the rose cutter in this set you will also find other flower and fruit themed cutter sets to create other beautiful arrangements.

Includes an Easy Rose Cutter measuring 80mm in diameter. The petals are marked with the suggested sequence in which the petals should be assembled to make the rose. The cutters are also all marked with the cone size needed to make the centre of the flower.

A 2-piece set of mini flower cutters measuring approximately 10mm. each in diameter. a 2-piece set of 12 flower and fruit themed pastry cutters measuring approximately 20-25mm. in diameter each. Complete instructions and diagrams are also included. Colour: N/A Material: Plastic Shape.

Flower and Fruit Size: 10mm. to 80mm. Theme: Floral Type: Edge cutters for sugar paste, gum paste, clay These pastry cutter sets are easily assembled to create beautiful flower arrangements or fruit decorations that are perfect to complement any cake decorated with sugarpaste or gum paste.