Anno 2020

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

  Pavoni - Silicone mold MAPLE - 8 portions GG049

Ephemeral, light and organic shapes. Detailed textures and outstanding details.

A line of silicone moulds that can be used for main courses, appetizers and desserts. A wealth of interpretations, to experiment with both hot and cold dishes, enriching the range of possibilities. And a unique spark to unleash your creativity.

Silicone mould 300x200 mm

Indent: max 66x62,5x2 h mm

Indent volume: ~ 3

Number of indents: 8.

Pavoni - Moule en silicone MARIPOSA - 8 portions GG051

Ephemeral, light and organic shapes. Detailed textures and outstanding details. A line of silicone moulds that can be used for main courses, appetizers and desserts. A wealth of interpretations, to experiment with both hot and cold dishes, enriching the range of possibilities. And a unique spark to unleash your creativity.

Silicone mould 300x200 mm

Indent: max 40x39x2 h mm

Indent volume: ~ 1

Number of indents: 12.

Pavoni - Silicone mould Pavoflex PASTEL 40TIME - by Antonio Bachour

To the multi-year collaboration between Pavoni Italia and the multi-awarded international pastry chef Antonio Bachour a new project is added: Pavoflex 300x175 line 40time moulds for medium portion, to be used for catering, wedding buffets, plate desserts, teatime and not only.

The perfect medium portion - 40 ml in volume - and six different shapes versatile and adaptable to every occasion.

Pavoflex PASTEL 40TIME - by Antonio Bachour

Measures: mm 80x27 x21 h

Capacity: 40 ml

12 indents.

Pavoni - DRY BRANCHES silicone mold - WOOD - 10 servings

DRY BRANCHES - WOOD

Ephemeral, light and organic forms. Detailed textures, surprising details. A line of silicone molds to be used for MAIN DISHES, APPETIZERS AND DESSERTS. Different interpretations, to be tested for hot or cold dishes, which broaden the spectrum of solutions.

And a unique spark to unleash your creativity.

300X200 MM SILICONE MOLDS

FOOTPRINT DIMENSIONS: max 78 x 48 x 2 h mm

VOLUME: ~ 2 ml IMPRINTS PER MOLD: 10 Sweet or salty, hot or cold, creams or mousse, chocolate or flan, everything can be shaped, made regular and flawless. Effectiveness, versatility and functionality. The right amount to garnish and customize your creations: a starting point for creating.

The high quality silicone of Pavoni makes detailed textures and impeccable details possible.

Plus the silicone is - dishwasher safe - withstands temperatures from -40 ° C to + 280 ° C - flexible and easy to store.

Pavoni - Moule silicone OVOSQUARE - 24 portions

OVOSQUARE

SKU GG020S Ephemeral, light and organic shapes.

Detailed textures and outstanding details.

A line of silicone moulds that can be used for main courses, appetizers and desserts.

A wealth of interpretations, to experiment with both hot and cold dishes, enriching the range of possibilities.

And a unique spark to unleash your creativity.

Silicone moulds 300x175 mm

Indent dimensions: oval 40 x 28 x 10 h mm / square 31 x 31 x 10 h mm

Volume: ~ 10 ml Indents per mould: 24

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

XF2520 ROUND MICRO PERFORATED STAINLESS STEEL BANDS MORE INFO Pavoni Italia and Gianluca Fusto presented the innovative Progetto Crostate, the new way to conceive the tart which are amazing to the taste and to the view. The concept starts with the creation of a mix of equipment to allow the chef to obtain tarts with perfect finishing; the key product of this system are the micro perforated stainless steel frames: the micro holes let the shortcrust pastry to hang onto the frame, avoiding the border collapsing during baking and a perfect browning of the basis H 2 cm Ø 25 cm  baked tart 14/16 portions

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Pavoni - Forosil Strip STRIP40FPC

The convenience of Forosil comes in strip. The Forosil Strips are totally non-stick and the micro-holes guarantee a better and more effective heat distribution. Use them to line the smooth stainless steel bands: you’ll get perfect cakes, easy to unmold, without greasing before! You can use them for cakes to bake and leavened preparations.

Developed in cooperation with Stefano Laghi.

Dimension: 635x38 h max 10

10 pcs for box.

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Pavoni - Silicone mold Pavoflex BONSAI 8 servings

Ephemeral, light and organic shapes. Detailed textures and outstanding details. A line of silicone moulds that can be used for main courses, appetizers and desserts. A wealth of interpretations, to experiment with both hot and cold dishes, enriching the range of possibilities.

And a unique spark to unleash your creativity.

Silicone moulds 300x200 mm

Indent dimensions: max 80 x 55 x 2 h mm

Volume: ~ 3 ml

Indents per mould: 8

Pavoni - Silicone mold PUZZLE 18 servings

Ephemeral, light and organic shapes. Detailed textures and outstanding details. A line of silicone moulds that can be used for main courses, appetizers and desserts. A wealth of interpretations, to experiment with both hot and cold dishes, enriching the range of possibilities. And a unique spark to unleash your creativity.

Silicone moulds 300x175 mm

Indent dimensions: max 90 x 90 x 4 h mm (9 pcs)

Volume: ~ 31 ml (9 pcs)

Indents per mould: 18

Pavoni - FOROSIL STRIP30FPC

The convenience of Forosil comes in strip. The Forosil Strips are totally non-stick and the micro-holes guarantee a better and more effective heat distribution. Use them to line the smooth stainless steel bands: you’ll get perfect cakes, easy to unmold, without greasing before! You can use them for cakes to bake and leavened preparations. Developed in cooperation with Stefano Laghi.

Dimension: 635x28 h max 10.

10 pcs for box.

Pavoni - FOROSIL STRIP30FPC

The convenience of Forosil comes in strip. The Forosil Strips are totally non-stick and the micro-holes guarantee a better and more effective heat distribution. Use them to line the smooth stainless steel bands: you’ll get perfect cakes, easy to unmold, without greasing before! You can use them for cakes to bake and leavened preparations. Developed in cooperation with Stefano Laghi.

Dimension: 635x20 h max 10.

10 pcs for box.