Knife - Essential Tool for Camping, Outdoor Adventure and collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

The Sanelli Jolly Curved Vegetable Knife, model 331207.N, is a kitchen knife designed specifically to tackle vegetable cutting. This knife features a curved blade with a length of 7 centimeters, making it ideal for peeling small vegetables such as carrots, potatoes and tomatoes.

The knife is made of high-quality materials to ensure durability, sharpness and precision. The blade is made of hardened stainless steel, making it resistant to corrosion and rust. This ensures that the knife keeps its sharp edge for a long period of time and requires little effort to cut.

The knife's handle is made of durable material and provides a comfortable and secure grip during use. The ergonomic design of the handle reduces hand fatigue and provides optimal control while cutting.

Blade length: 7 cm.

Color: black

Usage: rigid blade knife, ideal for peeling fruits and vegetables.

Handle: polypropylene with non-slip texture.

Jolly line.

Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

The blade features a micro-serrated edge that gives greater ease of use and durability.

The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

The Sanelli Jolly table knife, model 3332.11.N, is a kitchen knife with a blade length of 12 centimeters. This knife is especially suitable for cutting and serving meat, cheese, bread and other foods during meals.

The blade of the Jolly Table Knife has a micro serrated edge, which allows it to easily tackle foods with a crust or tougher skin effortlessly. The serrated edge provides extra grip and facilitates precise cutting, allowing for even, clean slices.

The knife is made of high-quality materials to ensure durability and performance. The blade is made of hardened stainless steel, which makes the knife resistant to corrosion and rust. In addition, the handle is made of a durable material that provides a secure and comfortable grip during use.

Blade length: 12 cm.

Color: black

Use: ideal for cutting meat, pizza, cheese and fruit.

Blade: semi-rigid and serrated with a rounded tip.

Handle: polypropylene with non-slip texture.

Jolly line.

Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

The blade features a micro-serrated edge that gives greater ease of use and durability.

The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

The Sanelli Jolly Rib Knife, model 3322.12.N, is a kitchen knife designed specifically for cutting and serving steaks and chops. This knife features a 12-centimeter long blade with a micro serrated edge.

The serrated edge of the Jolly Rib Knife makes it easy to tackle tougher cuts of meat, such as steaks and chops, effortlessly. The micro serrated edge provides greater grip on the meat and facilitates precise cutting, allowing for even, clean slices.

The knife is made of high-quality materials to ensure durability and reliable performance. The blade is made of hardened stainless steel, making it resistant to corrosion and rust. In addition, the handle is made of a durable material that provides a secure and comfortable grip during use.

Blade length: 12 cm.

Color: black

Use: steak, pizza, tomato and bread.

Blade: semi-rigid, serrated and pointed.

Handle: polypropylene with non-slip texture.

Jolly line.

Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

The blade features a micro-serrated edge that gives greater ease of use and durability.

The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

The Sanelli Jolly Knife Tomato Knife 12cm (3342.12.N) is a specialized tool designed to tackle cutting tomatoes effectively. This kitchen knife features a blade length of 12 cm, ideal for handling tomatoes of various sizes.

The blade of the knife is made of high-quality stainless steel, which offers good corrosion resistance and maintains lasting sharpness. The main feature of this knife is the micro serrated edge on the blade, which makes it easy to tackle the skin of the tomato without crushing it.

The handle of the knife is made of durable synthetic material, which provides excellent grip and control during use. The ergonomic shape of the handle fits comfortably in the hand, allowing precise and safe handling.

Blade length: 12 cm.

Color: black

Blade: semi-rigid and serrated, great for tomatoes and bread.

Handle: polypropylene with non-slip texture.

Jolly line.

Six models of small, versatile knives designed for every use in the kitchen. Practical, handy, always sharp, suitable for amateur or professional use.

The blade features a micro-serrated edge that gives greater ease of use and durability.

The series is completed by two knives with a smooth blade, indispensable for peeling and carving fruit and vegetables.

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Recommended use: Barbecue, Vegetable, Raw Meat, Fish

Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked Fallkniven

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

Intended use: Tactical

Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel
Blade treatment: powder coating
Handle: Kraton
Blade length: 203mm.
Blade thickness: 4mm.
Total length: 325mm.
Weight: 332g.
Sheath: Kydex
Packaging: Cardboard box with Ka-Bar logos
Note: -

Black Fighter - 02-1271 - knife
Blade: 1095 Carbon Steel 56 / 58HRC teflon
Handle: Kraton
Blade length: 200 mm.
Total length: 323 mm.
Blade thickness: 3.5 mm.
Length Closed: -
Weight: 350g.
Closed: -
Sheath: hard plastic
Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker