Nextorch

KEY FEATURES.
* Maximum power output of 2,000 lumens.
* Uses an ultra-high-efficiency UHE LED.
* Features a primary white light (color temperature: 6,000K) and an auxiliary red light
* Uses a unibody optical lens system with various facets that emit uniform light
* Powered by an external power source, supports PD protocol.
* Has a built-in battery (3.6 V 40 mAh) and automatically switches to EMERGENCY mode if power is disconnected.
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 7 brightness levels, 2 light sources and 3 special modes available.
* Made of durable PC material
* Die-cast aluminum alloy heat sink for efficient heat dissipation.
* Shock resistant up to 1 meter
* Waterproof and dustproof grade according to IP68 standard (2 meters immersion)

TECHNICAL DATA.
LEDs: 8x UHE LEDs with a life cycle of 50,000 hours
Output: 7x bright, digitally adjusted outputs and 3 signaling modes
Powers and durations primary light: 2000 lumens (9h.) -> 1000 lumens (11h.) -> 400 lumens (17h.) -> 180 lumens (31.5h.) -> EMERGENCY 20 lumens (66h.) -> S.O.S. -> Beacon
Powers and durations auxiliary red light: 15 lumens (52h.) -> 5 lumens (78h.) -> flashing at 15 lumens
Range: up to 160mt.
Peak power: 6000 candelas
Power Sources: The flashlight does not come with batteries, but only with a USB-C cable to connect it to compatible external PowerBanks that have at least a discharge capacity of 20W or more and are compatible with the PD protocol - The flashlight is also compatible with regular PowerBanks that do not meet the previous requirements, but can only produce a maximum power of 1000 lumens. - It has a small built-in battery (3.6V / 40mAh) that allows it to produce a 20 lumens emergency light for 30 minutes if left without power from the PowerBank
Flashlight dimensions: 80x41.9x26.1mm. 
Weight: 114g (with mounting bracket, elastic band and USB cable included)
Lens: optical matrix
Body: made of PC
Strap: elastic, breathable, adjustable in diameter
Impact resistance: withstands falls from 2m height

The NITECORE MT1A Pro is a compact and lightweight flashlight with a powerful UHi 25 LED that emits 800 lumens up to 250 meters. It runs on a 14500 rechargeable battery or an AA battery, and has a durable design thanks to aircraft aluminum with HA III military finish. It is waterproof (IP68), shockproof up to 2 meters, and has a scratch-resistant optical lens. It has a back switch for easy operation, a constant current circuit, and a brightness level memory function.

LEDs: UHi 25 LEDs with a life cycle of 50,000 hours
Operating Modes: 3 light powers
Powers and Durations with NL1411R battery: 800 Lumens (1h.) -> 300 Lumens (1.45h.) -> 50 Lumens (10h.)
Powers and Durations with 1 A battery: 200 Lumens (1.30h.) -> 50 Lumens (5h.)
Peak power: 15700 candelas
Maximum lighting distance: 250m.
Power and light selection method: rubber back button:
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: uses NL1411R (included); also compatible with 1x AA disposable/rechargeable 1.2/1.5V
Measurements: 93mm (L) - 17.2mm (D shaft) - 19.7mm (D head)
Weight: 32g. battery excluded / 52g. battery included
Accessories: wrist strap, clip, charging cable
Waterproofness: as per IPX-8 standard, submersible to 2m depth for 30min.
Impact resistance: withstands falls from 2m height

Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 5300mAh
* Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 20A

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FLASHLIGHT COMPATIBILITY
works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i, SRT7i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

BATTERY FEATURES

* Rechargeable Li-Ion 18650 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4000mAh - 10A
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V

BATTERY PRECAUTIONS

* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

BATTERY TECHNICAL SPECIFICATIONS

* Capacity: 4000mAh nominal
* Dimensions: 18.6+/-0.3mm diameter x 69.8+/- 0.3mm height
* Approximate weight: 50g
* Average rated voltage: 3.6V
* Peak voltage: 4.2V
* Power: 10A
* Life cycles: > over 500 cycles

Kit designed to extend the life of your Nitecore headlamp with an extra 6000mAh charge.

With this kit, your Nitecore headlamp will be powered first from the powerbank and then, when that is finished, use the rechargeable battery built in or contained within. Compatible with all new Nitecore headlamps (i.e. NU40 / NU43 / NU50 / NU53 / HC65UHE etc.)

The kit consists of:
* Breathable, non-slip and reflective elastic headband.
* Attachment system for the Carbon 6K powerbak.
* Elastic USB-C power cable
* 6000mAh carbon fiber battery pack water resistant as per IP68 standard

Technical Specifications:

* Battery type: Li-ion 21700
* Rated capacity: 6,000mAh 3.6V (21.6Wh)
* Rated energy 3,700mAh 5V (TYP 1A)
* USB-C input: 5V⎓2A
* USB-C output: 5V⎓2A
* IP68 waterproof rating.
* Dimensions ø22.8 mm x 90.0 mm
* Weight 88g (accessories not included)
* Accessories included: USB-C to USB-C charging cable, stand, elastic headband

This product is equipped with 3 red indicator lights that display charging status and power level; they can also function as rear indicator lights.

Key Features
* Uses a UHi 20 LED with an output of 900 lumens.
* Range of 255 meters and peak beam intensity of 16,000cd.
* Removable rechargeable battery with magnetic charging function for convenience and ease of use.
* Compact and lightweight recoil-proof design, ideal for carrying.
* Controllable via the dual button on the tail
* Constructed of aircraft aluminum alloy

Led:1x UHi20 with a life cycle of 50,000 hours
Operating Modes:Press and hold one of the power buttons to access momentary tactical power on, briefly press one of the power buttons to access constant power on.
Powers and Durations:900 lumens (35 min.) 
Peak power: 16000 candles
Maximum lighting distance: 255m.
Ignition method: double switch, ambidextrous, placed at the tail of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: runs on a proprietary rechargeable Li-ion 3.7V / 500mAh / 1.85Wh battery
Measurements: 5.6cm (Length) - 3.3cm (Width) - 3.2cm (thickness, slide included)
Weight: 66g. with battery inserted
Accessories included: magnetic charging cable, sled retainer
Waterproofness: as per IPC6 standard
Impact resistance: withstands falls from 1m. height
Notes: quick universal attachment sled, compatible with Glock and Picatinny systems 

LED: 8x UHE LEDs with a life cycle of 50,000 hours
Outputs: 8x bright, digitally adjusted outputs and 3 signaling modes
Spot light powers and durations: 8 lumens (82h.) -> 40 lumens (40h.) -> 100 lumens (31h.) -> 400 lumens (14h.) -> 1300 lumens (5h.) -> 2000 lumens (2h.) -> Beacon -> SOS
Flood light powers and durations: 8 lumens (82h.) -> 40 lumens (40h.)
Powers and durations auxiliary red light: 5 lumens (66h.) -> 15 lumens (37h.) -> flashing at 15 lumens
Range: up to 222mt.
Peak power: 12293 candelas
Usable batteries: 1x Nitecore 1840HP 10A 3.6V (included in package), compatible with any 18650 Li-ion with at least 8A discharge capacity
Flashlight dimensions: 89.5x42.2x46 mm. 
Weight: 152g (with battery, mounting bracket and elastic band)
Lens: optical matrix
Body: aircraft aluminum
Finish: anodized, Type III
Strap: elastic, breathable, adjustable in diameter

Original Nitecore remote switch to be used by replacing the tail cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical, or airsoft purposes.

Once installed, it allows for temporary activation of the light by pressing the dedicated rubber remote pad; the light will turn off as soon as pressure on the pad is released. Additionally, it also integrates a standard power button on the side for normal flashlight use.

Compatible only with models:

MH12 PRO - MH25 PRO

The Nitecore GM02 Pro is made of aerospace aluminum alloy with HA III military-grade hard-anodized finish for high durability.

A large stainless steel thumb nut allows for adjustment and ensures stable mounting on a Picatinny rail.

It can accommodate flashlights with a body diameter from 25.8mm to 26.5mm and fits models like

Nitecore SRT7 SRT7i, SRT6i, MH12 Pro, and MH25 Pro.

Dimensions L-4.83 cm x W-4.29 cm x H-4.29 cm

Weight 68 grams

NITECORE introduces the new high-performance rechargeable flashlight with AA batteries, the MT2A Pro, the latest addition to the MT series. Thanks to the UHi 20 LED, it can achieve higher brightness and extended range with superior ease of use.

Traditionally, AA flashlights were known for their limited brightness and range, disappointing many users. However, with the UHi 20 LED, the MT2A Pro increases brightness to a staggering 1,000 lumens, a 190% leap from its predecessor, and offers a range of 255 meters, ideal for everyday carry, emergency lighting, outdoor work, and more.

The MT2A Pro comes standard with a rechargeable lithium battery NL1416R with a capacity of 1,600mAh, a continuous discharge current of 5A, and a USB-C charging port. As an additional feature, the flashlight also works with AA batteries, whether alkaline, lithium, or rechargeable, ensuring user convenience in any outdoor scenario. It is suitable for concealed carry with a tube diameter of 17.2mm (0.68") and weighs only 87.6g (3.45 oz) (excluding the clip). The body is precision-machined with CNC processing and features non-slip knurling to ensure a secure grip even with sweaty or wet hands or while wearing gloves.

The MT2A Pro is easy to use with a single rear switch for operation. The U-shaped rear cap is designed to prevent accidental activation with the ability to stand upright. Impressively, it has an IP68 rating for dust and water resistance and can withstand drops from 1 meter.

Powers and durations certified in the laboratory according to ANSI/NEMA FL1 standards using 2x AA 1.2V 2400mAh - under different usage conditions or using different batteries, data may vary.

LED: UHi 20 LED with a lifespan of 50,000 hours
Operating Modes: 3 brightness levels
Powers and Durations with NL1416R battery: 1000 Lumens (1.30h) -> 300 Lumens (2 hrs 45) -> 50 Lumens (20h)
Powers and Durations with 2 AA batteries: 500 Lumens (2h) -> 60 Lumens (11h)
Peak Power: 16500 candela
Maximum Illumination Distance: 255m
Ignition Method: Rear rubber button
Light Selection Method: With the flashlight head unscrewed, turning off and on the rear button
Head: Aircraft-grade aluminum
Body: Aircraft-grade aluminum
Finish: Anodized, Type III
Lens: Ultra-transparent hardened glass with anti-reflective coating
Batteries: Uses NL1416R and 2x AA disposable/rechargeable batteries of 1.2/1.5V
Measurements: 142.8 mm (L) - 19.7 mm (D body) - 2.25 cm (D head)
Weight: 40g - batteries excluded
Accessories: Wrist lanyard, spare o-rings, rubber button, tactical ring
Waterproofing: According to IPX-8 standard, submersible up to 2m depth for 30min
Impact Resistance: Resists drops from a height of 1.5m

BATTERY INCLUDED NL1416R

FULL TECHNICAL SPECIFICATIONS:

LED: 1x Led white light; 1x Led red light, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 350 lumens (3h.) -> 100 lumens (12h.) -> 6 lumens (140h.) -> SOS -> Beacon / Red Light - 5 lumens (40h.) -> Slow Flashing
Range: up to 120m.
Peak power: 3500 candles
Batteries that can be used: 3x AAA 1.2/1.5V ministyl type or Nitecore HLB1300 battery pack (optional, sold separately)
Flashlight dimensions: 59x50x36mm. (with stand included)
Weight: 67g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, reflective in the dark
Notes: water resistant as per IP66 standard
Accessories Included: elastic strap - front mount tilts up to 90° - 3x disposable AAA batteries

Introducing the NITECORE SRT7i, the latest advancement in the Tactical SmartRing Series. This flagship model represents a breakthrough in the field of tactical flashlights, being equipped with the 4th generation of the Smart Switch, which allows a twist and a push for one-handed control of mode switching and stepless brightness adjustment. This feature makes it particularly suitable for tactical use and immediate response to various situations.

KEY FEATURES:
* Dual tail switches allow for intuitive operation, specifically tailored for law enforcement, hunting and tactical applications.
* Fourth generation of SSR (Smart Selector Ring) technology to quickly and smoothly select brightness levels and operating modes
* Maximum peak beam intensity of 87,500cd and maximum range of 580 meters with maximum autonomy of 800 hours
* STROBE READY™ technology to allow quick access to STROBE mode (patent no. ZL201320545349.4)
* Li-ion battery intelligent charging circuit via USB-C port
* NITECORE 21700i Li-ion battery included (NL2150HPi 5,000mAh)
* Built-in Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
* Break glass on silicon nitride ceramic torch head
* Constructed of aircraft grade aluminum alloy with HA III military grade hard anodized finish
* Waterproof and dustproof grade according to IP68 standard (2 meters submersion) and shock resistant up to 2 meters

TECHNICAL SPECIFICATIONS:

Led: 1x SFT-70 high performance LED, with a life cycle of 50,000 hours
Operating modes: adjustable light output, between 0.1 to 3000 lumens and 1 strobe, electronically regulated
Powers and Durations: 3000 Lumens (3.15h) -> LOW 100 Lumens -> ULTRA LOW 0.1 Lumens (800h) -> Strobe 3000 Lumens
Peak power: 87500 candles
Maximum lighting distance: 580m.
Power-on Method: Back Button and StrobeReady Button
Luminous dial method: Smart Dial Ring and double buttons
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: Ultra clear hardened glass with anti-reflection treatment
Batteries: (included): 1x 21700 3.6V 18W NL2150HPi - also compatible with 2x CR123 3.0/3.6/3.7V using included adapter
Measurements: 16.3cm (L) - 2.54cm (D shaft) - 4.0cm (D head) - 3.1cm (D shank)
Weight: 175g. without batteries
Accessories: NITECORE 21700i Rechargeable Li-ion Battery (NL2150HPi 5,000mAh), CR123 Battery Adapter, Holster, Clip, Lanyard, Spare O-ring, USB-C Charging Cable
Waterproof: as per IP68 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands drops from 2m in height

FEATURES
* High-capacity USB-C rechargeable headlamp with superior performance.
* Maximum power output of 1,400 lumens.
* Red light illumination designed to preserve night vision.
* Uses a unibody optical lens system with various facets that reflect light evenly.
* Built-in 4,000 mAh lithium-ion battery.
* Built-in intelligent lithium-ion battery charging circuit with USB-C charging port (5V⎓2A).
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 5 brightness levels, 2 light sources and 3 special modes available.
* Designed with 4 power indicators to inform about the remaining battery charge
* Made of durable PC material with aluminum alloy front housing
* Compact and lightweight
* Impact resistant up to 2 meters in height
* Waterproof and dustproof grade according to IP68 standard

WEIGHTS AND DIMENSIONS
Dimensions: 83.4mm x 48.5mm x 43.9mm (Front Stand Included)
Weight: 146g (Front Stand and Elastic Band Included) / 12g (Front Stand Included)

ACCESSORIES INCLUDED
USB-C charging cable, Front Elastic Band

TECHNICAL SPECIFICATIONS.
LEDs: 2x primary white, 1x auxiliary red, all with a life cycle of 50,000 hours and an illumination radius of more than 100°
Operating Modes: 5 light powers on primary light + 2 special modes; 2 on red light
Powers and Durations Primary White: 1400 Lumens ( / ) -> 600 Lumens (11h.) -> 300 Lumens (16h.) -> 100 Lumens (38h.) -> 8 Lumens (180h.) -> SOS -> Beacon
Peak power: 3800 candelas
Maximum lighting distance: 130m.
Power and luminsa selection method: Two dedicated power, and light selection buttons
Body: plastic material with aluminum unibody front door
Battery: built-in, non-removable, 3.6V Li-Ion 4000mAh battery
Water resistance: as per IP68 standard
Impact resistance: withstands falls from 2m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator - Proximity sensor that automatically switches light output if it detects nearby objects

KEY FEATURES:

* Ultralight AA dual-beam headlamp.
* Maximum power of 240 lumens
* Red light illumination designed to preserve night vision.
* Uses a unibody optical lens system with various facets.
* Compatible with various AA batteries, such as alkaline , Ni-MH and lithium batteries by tolerating different voltages.
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 3 brightness levels, 2 light sources and 3 special modes available.
* Made of special plastic resistant to impact and low temperatures.
* Compact and lightweight
* Shock and drop resistant up to 1 meter high.
* Waterproof and dustproof grade according to IP66 standard





FULL TECHNICAL SPECIFICATIONS:

LED: 1x White light LED; 1x Red light LED, both with 50,000-hour life cycle
Output 7 digitally adjusted light modes
Powers and durations: White Light - 240 lumens (4h.) -> 60 lumens (10h.) -> 6 lumens (400h.) -> SOS -> Beacon / Red Light - 5 lumens (10h.) -> Slow Flashing
Range: up to 90m.
Peak power: 1600 candelas
Batteries that can be used: 1x AA type 1.2/1.5V stylus
Flashlight dimensions: 61.5x36.2x28.9mm. (with stand included)
Weight: 36g (with stand and elastic band included - batteries excluded)
Lens: thermoplastic polymers
Body: thermoplastic polymers
Strap: elastic, adjustable, lights up in the dark
Notes: water resistant as per IP66 standard
Accessories: elastic strap - front mount tiltable up to 90° - 360° rotatable multipurpose clip for attachment to various mounts

KEY FEATURES:
* Ultra lightweight IR (infrared) mini signal light.
* Uses 4 x high performance LEDs.
* Produces IR light (940nm wavelength), red, green and blue light for a total of 9 modes.
* Switch design allows one-handed operation of the flashlight
* Powered by a built-in 250mAh Li-ion battery for up to 75 hours of battery life
* Built-in Li-ion battery charging circuit with USB-C charging port.
* ARC rail adapter on the body and 3 lightweight brackets included to enable multiple mounting and transportation options
* Made of durable PC materials
* Impact resistant up to 1 meter in height





FULL TECHNICAL SPECIFICATIONS:

LEDs: 4x high-power LEDs: infrared, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light for each LED + 1 special mode (blue/red light police warning)
Powers and Durations Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - Infrared ( 4h.)
Powers and Durations Flashing Light : Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - Infrared ( 50h.) - Police Warning ( 56h.)
Method of power on and selection : Central button for power on, power off and light selection
Body: thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Measurements of flashlight with bracket: 2.95cm (Length) - 2.95cm (Width,) - 2.54cm (Thickness)
Flashlight weight: 16.7g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: actual powers and durations, lab-certified

High-performance 18650 battery (8A discharge) specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 3500mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 69.3±0.3mm / 2.73"±0.01"
* Diameter: ≤18.7mm / 0.74"

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Innovative and practical 18650 battery that can be recharged either traditionally or via built-in USB-C port and can also be used as a pocket power bank

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery and pocket power bank.
* Rated voltage: 3.6V / 9.36Wh
* Capacity: 2600mAh
* Positive Pole: protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* USB-C Input and Output: 5V/1A

DIMENSIONS
* Length: 71±0.3mm
* Diameter: 18.6mm±0.2mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of the batteries

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

FLASHLIGHT COMPATIBILITY
works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

High discharge power (15A) 21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C, rechargeable directly via built-in USB-C port or via conventional charger

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 15A

DIMENSIONS
* Length: 76.8 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

21700 battery specially designed to withstand cold and harsh climates and temperatures as low as -40° C

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4200mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 8A

DIMENSIONS
* Length: 74.6 +/- 0.3mm
* Diameter: <22.3mm

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FEATURES
* Ultra-light dual-beam USB-C rechargeable headlamp weighs only 45g.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock-resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 45g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

Key Features
* Dual-slot USB-C smart charger.
* QC (Quick Charge) and PD (Power Delivery) inputs available.
* Able to charge 2 batteries at the same time and control each slot independently.
* Charging speed of up to 3,000mA in a single slot.
* Compatible with Li-ion and Ni-MH/Ni-Cd batteries, with automatic detection
* Automatic detection of battery charge level and automatic selection of appropriate voltage and charging mode
* Automatic selection among 3 charging modes (DC, CV and -dV/dt).
* Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current
* Automatic suspension upon completion of charging
* Reverse polarity and short circuit protection.
* Activation of overcharged batteries
* Protection against excessive charging time (overtime).
* Made of durable and fireproof PC materials.
* Optimal design for heat dissipation
* Certified by RoHS, CE, FCC and CEC

ACCESSORIES INCLUDED
USB-C Charging Cable

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A / 9V⎓2A / 12V⎓1.5A - 18W (MAX)
Output: 4.2V±1% / 1.48V±1%
Rapid Recharge: 3,000mA*1 MAX / 1,500mA*2 MAX 
Standard Recharge: 2,000mA*1 MAX / 1,000mA*2 MAX

BATTERY COMPATIBILITY
IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Dimensions: 148mm x 65mm x 37mm (5.83" x 2.56" x 1.46")
Weight: 120.4g (4.25 oz) (Charging cable not included)

Key Features.
* Quad-slot USB-C smart charger.
* QC (Quick Charge) and PD (Power Delivery) inputs available.
* Able to charge 2 batteries at the same time and control each slot independently.
* Charging speed of up to 3,000mA in a single slot.
* Compatible with Li-ion and Ni-MH/Ni-Cd batteries, with automatic detection
* Automatic detection of battery charge level and automatic selection of appropriate voltage and charging mode
* Automatic selection among 3 charging modes (DC, CV and -dV/dt).
* Automatic detection of large/small capacity batteries and automatic selection of appropriate charging current
* Automatic suspension upon completion of charging
* Reverse polarity and short circuit protection.
* Activation of overcharged batteries
* Protection against excessive charging time (overtime).
* Made of durable and fireproof PC materials.
* Optimal design for heat dissipation
* Certified by RoHS, CE, FCC and CEC

ACCESSORIES INCLUDED
USB-C Charging Cable

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A / 9V⎓2A / 12V⎓1.5A - 18W (MAX)
Output: 4.2V±1% / 1.48V±1%
Rapid Recharge: 3,000mA*1 MAX / 1,500mA*2 MAX / 1,000mA*3 MAX / 750mA*4 MAX
Standard Recharge: 2,000mA*1 MAX / 1,000mA*2 MAX / 700mA*3 MAX / 500mA*4 MAX

BATTERY COMPATIBILITY
IMR/Li-ion: 10440, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 21700, 22500, 22650, 25500, 26500, 26650, 26700
Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

Dimensions: 148mm x 105mm x 37mm (5.83" x 4.13" x 1.46")
Weight: 191.4g (6.75 oz) (Charging cable not included)

FEATURES
* USB-C rechargeable dual-beam headlamp.
* Specially designed for outdoor activities.
* Equipped with spotlight + floodlight (color temperature: 5500K) and red light illumination
* With a maximum output of 400 lumens
* Uses a unibody optical lens system with various facets to reflect a light evenly and diffusely
* Maximum beam intensity of 1,029cd and maximum range of 64m
* Built-in 650mAh Li-ion battery.
* Constant current circuit ensuring stable light output with a maximum range of 90h
* Designed with two different buttons in shape and tactile feel for easy one-handed operation
* 4 brightness levels, 3 light sources and 3 special modes available
* Integrated intelligent Li-ion battery charging circuit with USB-C charging port.
* Designed with 4 charge indicators to indicate the remaining battery charge
* Made of durable polymer material
* Waterproof and dustproof as per IP66 standard
* Shock resistant up to 1 meter

WEIGHTS AND DIMENSIONS
Dimensions: 60.1mm x 36.8mm x 25mm (Stand Included)
Weight: 56g (Stand and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C Charging Cable, Elastic Headband

TECHNICAL SPECIFICATIONS.
Led: 1x white spot light, 1x white flood light, 1x red auxiliary all with a life cycle of 50,000 hours
Operating Modes: 10 light powers (Mix, Spot, Flood, Red) + 2 special modes (SOS and Beacon)
Powers and Durations with MIX light : 400 Lumens (2.40h. ) -> 200 Lumens (4.40h.) -> 60 Lumens (10.25h.)
Peak power : 1029 candelas
Maximum lighting distance: 64m.
Power and luminsa selection method: Two dedicated power buttons, and light selection
Body: polymer
Battery: built-in, non-removable, 3.7V, 650mAh Li-Ion battery
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator

COMPATIBILITY:
Only with the following NITECORE flashlight models: P10i, P10iX, P20i, P20i UV, P20iX, P30i, P35i


DESCRIPTION:
2.4G radio-frequency wireless remote switch to remotely control in ignition and light selection your NITECORE flashlight belonging to the "i" series to be used by replacing the back cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is to be mounted in place of the original flashlight cap and a wireless remote control to be placed via hook-and-loop (provided) or Velcro (provided) to your firearm or wherever you find most convenient within a range of about 1m. so that you can turn on and control your flashlight without the hassle of a cable.

It allows both temporary lighting of the light (light is emitted by pressing and holding the pad, goes out by releasing it) and strobe function via dedicated button; it also allows fixed lighting of the light with subsequent possibility of varying its luninous power.


PACKAGE CONTENTS:
* Wireless back cap
* Wireless remote switch already paired and with batteries already inserted
* Velcro-type strap closure
* Velcro-type hook-and-loop strap
* 2 Picatinny rail mounts

Nylon tactical belt sheath, with magnetic closure, designed to prevent accidental activation while carrying.

Compatibility:
* NITECORE P20i
* NITECORE P20iX
* NITECORE MH12 PRO

Dimensions:
155mm x 59mm x 50mm.

Material:
Nylon with quick-release rear belt loop and rigid polymer hook

Key Features:
* Powerbank equipped with LED lights with a capacity of 10000 mAh.
* Designed to be used at high altitudes and low temperatures.
* USB-C input/output channel.
* Output of 20W
* Compatibility with PD charging and QC 3.0.
* LED residual power level indicator.
* IPX5 waterproofing.
* Equipped with dual LED emergency flashlight that produces 50 Lumens for up to 30h. continuously


Technical Specifications:
* Capacity: 10000mAh / 3.6V / 36Wh
* Length: 8.9cm
* Width: 4.52cm
* Thickness: 2.26cm
* Weight: 168.5g
* USB-C input:5V⎓2.4A / 9V⎓2A
* USB-C Output:5V⎓3A / 9V⎓2.22A / 12V⎓1.68A

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:

Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Titanium alloy
Battery: Built-in 280mAh Li-Ion type, with built-in USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 21.5g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

Key Features:

* Revolutionary and extremely advanced keychain flashlight.
* Utilizes two LEDs capable of producing a maximum light output of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Utilizes a totally transparent optical lens to ensure even and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charging time etc.
* Built-in 280mAh Li-ion battery
* APC technology (Advanced Power Cut-Off) to minimize the power consumption when not in use.
* Integrated Li-ion battery charging system via USB-C plug.
* High-efficiency circuitry to ensure continuous illumination for up to 60 hours.
* 5 selectable brightness levels with direct access to the TURBO mode
* 2 selectable lockout levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and strains up to 30kg.

TECHNICAL DATA:
Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 brightness levels, selectable with the dedicated button
Powers and duration: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak power: 2000 candles
Maximum lighting distance: 89m
Lighting method: On/Off button
Light selection method: Light selection button
Body: Stainless steel with PVD surface treatment
Battery: Built-in 280mAh Li-Ion type, with integrated USB-C charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 26g. battery included
Accessories: steel ring for keychain attachment
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: it resists falls from 1m height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly available); during charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a keychain or other equipment, resists a traction of up to 30kg.

Power and duration certified in laboratory by ANSI/PLATO FL 1-2019 standard

Mini organizer made of 500D water-repellent Polyester consisting of a zippered main compartment (to store cell phones, power bank, headphones, keys and any other bulky gadget) with a small internal net to hold small products; two external side mesh compartments for quick access (for flashlights, cutters, folding knives, multipurpose tools).

Material: 500D water repellent polyester
Dimensions: 16cm x 9.5cm x 8cm
Carabiner: rear, aluminum

KEY FEATURES:
* Uses 4 x high performance LEDs.
* Offers 9 lighting modes including 4 constant colors + flashing and red/blue flashing
* Powered by a built-in 250mAh Li* ion battery that allows constant light up to 75 hours.
* Built-in Li-ion battery charging circuit via USB-C port
* One-switch design, one-handed operation.
* Built-in power indicator to inform about remaining battery power
* ARC rail adapter on the body and 3 lightweight brackets included to allow multiple mounting and carrying options
* Made of durable plastic materials
* Ultralight and compact design
* Shock resistant up to 1 meter high

FULL TECHNICAL SPECIFICATIONS:
LEDs: 4x high power LEDs, white, red, blue and green, with a life cycle of 50,000 hours
Operating Modes: 9 operating modes: steady and flashing light in 4 colors + 1 special mode (blue/red light police warning)
Powers and Times Fixed Light: Red (3 Lumens / 9h.) - Green (8 Lumens / 9h.) - Blue (2 Lumens / 48h.) - White (15 Lumens / 5.45h.)
Powers and Times of Flashing Light: Red (3 Lumens / 75h.) - Green (8 Lumens / 75h.) - Blue (2 Lumens / 5h.) - White (15 Lumens / 54h.) - Police Warning (56h.)
Power and selection method : Central button for power on, power off and light selection
Body: Thermoplastic materials
Battery: built-in, non-removable, 250mAh Li-Ion, rechargeable via MicroUSB plug
Flashlight size with bracket: 2.95cm (Length) - 2.95cm (Width) - 2.54cm (Thickness)
Flashlight weight: 15.8g.
Accessories: Magnetic hook bracket, curved helmet hook bracket, MOLLE system bracket, USB-C charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands falls from 1m height

Green filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a green light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

Red filter made of ultra-transparent hardened glass with rubber body, so you can adapt it to different types of flashlights with 65mm diameter heads.

This filter transforms the beam of your flashlight in a red light excellent to be used in conjunction with night vision and suitable not to scare animals. Also suitable for tactical readings of maps and various documentation.

Compatibility:

NITECORE: P30i

The Nitecore TIKI UV is a very light (12 grams) and compact (5.5 cm) rechargeable keychain flashlight with a maximum power of 1000 mW 365 nm of UV ultraviolet light.

In addition to the main LED there are two additional white light situation LEDs in the body of the TIKI

UV
High: 1000 mW - 1 hour of autonomy
Low: 180 mW - 2 hours of autonomy

Note: the TIKI UV will regulate its output to avoid overheating and prolong its lifespan when accessing UV HIGH for over 1 minute.

AUX white
High: 70 lumens - 30 minutes of autonomy
Low: 35 lumens - 1 hour of autonomy
Flashing: 35 lumens - 11 hours of autonomy

Lighting method and light selection: Front button
Materials: aviation aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, equipped with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diam.)
Weight: 12 g. - battery included
Accessories: steel ring for hooking to the key ring
Water resistance: as per IP66 standard, it resists dust, water and light immersions
to impacts: withstands falls from a height of 1m
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) standby for a whole year!

Portable, foldable and waterproof 100W solar panel, compatible with Nitecore NPS series Power Station.

Monocrystalline silicon panels, with cell efficiency of 23%: over 60% more efficient than conventional solar panels. Can convert energy steadily even on extremely cloudy days.

With a constant solar source, the FSP100W offers unlimited power in outdoor environments, especially when compared to Nitecore's NPS series of portable generators that can be recharged in 2 to 6 hours.

Lightweight (2.6kg) and compact (38.5x30x4.5cm when closed), it is very convenient to store and transport thanks to the integrated handle.

It withstands the harsh environment thanks to its laminated ETFE unibody structure that offers easy maintenance and IPX5 waterproof certification. The high-density outer fabric is also designed to provide excellent waterproof qualities.

TECHNICAL SPECIFICATIONS:

Model: SPF100W
Dimensions: Open: 60.6cm x 129.4cm x 0.5cm
Folded: 38.5cm x 30cm x 4.5cm
Weight: 2.6kg
Number of Panels: 8
Cell Efficiency: 23% (lab tested)
Operating Current: DC Output 5.6A
Operating Voltage: DC Output 18V (MAX)
Total Output Power: 100W (MAX)
Output port: 7.9 x 5.5mm customized DC output port

Key Features:

* Ultralight powerbank with a capacity of 20000 mAh.
* Carbon fiber chassis and panels
* Three channels of USB and USBC output
* LED residual power level indicator
* Low current charging mode for delicate electronics (Ex. Smartwatch, TWS headphones etc.)
* It is 27% lighter and 57% smaller than a traditional 20,000mAh powerbank

Technical Specifications:

* Capacity: 20000mAh / 3.85V / 77Wh
* Length: 13.63cm
* Width: 6.0cm
* Thickness: 2.14cm
* Weight: 324.50g
* USB-C Input (INPUT): 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A (18W MAX)
* USB-C (IN) Input: 5V⎓2.4A / 9V⎓3A / 12V⎓2.5A / 15V⎓2A / 20V⎓1.5A (30W MAX)
* USB-C (OUT1): 5V⎓2.4A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓2.25A (45W MAX)
* USB-A (OUT2/OUT3): 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
* Multi Ports: 5V⎓3A(MAX)
* Waterproof: IPX5

Never let your phone or flashlight die!
The Nitecore NB20000 power bank has an amazing 20,000 mAh battery that can charge almost 7 times an iPhone 12. Using the usual carbon fiber chassis, the NB20000 is 27% lighter and 57% smaller than traditional power banks, with a sleek, modern, minimalist design. The NB20000 is the ultimate portable backup charger for road warriors, outdoor enthusiasts who enjoy trail running, hiking and camping or first responders who are on an extended search and rescue mission. It's also a great addition to your emergency preparedness kit.

Ready for any challenge!
Quick Charge USB/USB-C output ports allow you to quickly charge three devices at once with maximum compatibility with all electronic devices. When quick charging isn't needed, the NB20000 has a low-current mode for delicate devices like Bluetooth headsets and smartwatches.

Lightweight and rugged!
The carbon fiber exterior panel makes NB20000 highly resistant to damage, abrasion and impact. In addition, NB20000 is water resistant with IPX5 rating and comes with a number of short circuit, overload and overheating protections.

WHY CHOOSE:
Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Light with strong spot - Integrated UV light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:
- Uses a Luminus SST-40-W LED with a maximum output power of 1,800 lumens
- UV light uses 4 x UV LEDs (320mW, 365nm wavelength)
- Glass and dishes with anti-reflective, crystal coating and PDOT treatments
- High-efficiency circuits to allow constant light for up to 50 hours continuously
- Dual rear power and selection buttons, quick and intuitive, designed for tactical applications
- STROBE READY technology that enables instant access to STROBO light
- STROBE light continuously varies randomly in frequency to increase disorientation effect
- Possibility to change the mode of use between Tactical Mode and Daily Mode
- Integrated charging system for Li-ion batteries via USB-C port
- NITECORE 21700 Li-ion battery included
- Impact-resistant silicon nitride front crown for excellent emergency glass-breaking capabilities
- Integrated ATR temperature control system
- Optical type lenses with anti-scratch coverage on both sides
- Made of anodized aircraft aluminum alloy with military grade HA III finish
- Waterproof as per IP68 standard (Submersible to 2 meters depth)
- Withstands impacts up to 2 meters high

Laboratory certified power and lifetime as per ANSI/NEMA FL1 standard using 1x 21700i 3.7V 4000mAh - under different usage conditions or using different batteries, data may vary

LED: 1x Luminus SST-40-W with a life cycle of 50,000 hours
Operating Modes: 3, electronically controlled + Strobe
Powers and Times: 1800 lumens (1h 45min.) -> 250 Lumens (8h 30min) -> 35 Lumens (38h) -> UV 320mW (30h) -> Strobe 1800 lumens
Peak power: 28500 candles
Maximum Lighting Distance: 337m
Ignition Method: Rear Button with "Momentary On" system for light signals and Rear Button "Mode" for immediate access to strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2140i, 4,000mAh - included in the package). If necessary, it can also work with 2x CR123 3.0V without being able to reach 1800 lumens of power.
Measurements: 15.0cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 124g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: thermoplastic, rigid, for quick deployment of the flashlight
Impact resistance: it resists falls from 1.5m height

P30i hunting torch with GM02MH magnetic attachment

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the dedicated button + Warm white light + Warm white light flashing + Ultraviolet
Powers and Durations: 300 Lumens (0.30h.) -> 60 Lumens (1h.) -> 15 Lumens (4h.) -> 1 Lumen (40h.) -> UV -> CRI light -> CRI flashing
Power peak: 1260 candles
Maximum illumination distance: 71m.
Lighting method and light selection: Front button
Materials: aviation aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, equipped with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diam.)
Weight: 12g. - battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light immersions
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package)

The Tiki GITD will glow green in the dark after it has been illuminated by UV light.

WHY CHOOSE:

Tactical/military use - High light output - Very compact size - Convenience of integrated charging system - Wide beam light - Convenience and immediacy of light selection controls. With Strobe Ready technology, simply press and hold the secondary (Mode) button to activate strobe mode at any time.

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port on the head.
* Rechargeable NITECORE 21700 battery (NL2150i, 5,000mAh) included in the package.
* Uses 4 CREE XP-L2 V6 LEDs with a maximum output of 4,000 lumens
* Wide-range light with a central brightness of 12200cd. and a maximum range of 221 meters.
* Glasses and parabolas with anti-reflection treatments, crystal coating and with PDOT (Precision Digital Optics Technology).
* Frontal tungsten carbide glass breaker
* Integrated potentiometer with indicator light showing the remaining battery charge and voltage remaining.
* Constructed of solid aircraft aluminum alloy with military specification anodizing
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700i 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LEDs: 4 CREE XP-L2 V6 LEDs with a 50,000 hour life cycle
Operating Modes: 6, electronically controlled + Strobe
Powers and Times: 4000 lumens (30min.) -> 1700 Lumens (2h) -> 850 Lumens (2.30h.) -> 300 Lumens (7.15h) -> 50 Lumens (38h) -> 2 Lumens (350h) -> Strobe
Peak power: 12200 candles
Maximum Lighting Distance: 221m
Lighting method: Rear button with "Momentary On" system for light signals and Rear "Mode" button for immediate access to the strobe function, which remains active as long as the button is held down
Light selection method: With the flashlight on, by pressing the rear "Mode" button
Head: Aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-glare treatment
Batteries: works only with a rechargeable battery 21700 Nitecore "i series" (NL2150i, 5,000mAh - included in the package). If necessary it can also work with 2x CR123 3.0V but stopping at 1060 lumens of power
Measurements: 14.1cm (L) - 2.54cm (D shaft) - 3.18cm (D head)
Weight: 116g. excluding batteries
Accessories: wrist strap, NTH20 tactical polymer sheath, spare o-ring, clip, spare rubber back button
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Scabbard: thermoplastic, rigid, belt-mounted
Impact resistance: resists falls from 1.5m height

Original Nitecore remote control to be used by replacing the rear cap of your flashlight; ideal to be used with the flashlight mounted under a firearm for hunting, tactical or soft-air use.

The remote consists of two parts: an aluminum back cap that is mounted in place of the original cap of the flashlight and a removable remote cable that attaches via USB-C plug. Once plugged in, it allows both the temporary switching on of the light (the light is emitted by pressing and holding the pad, it turns off by releasing it) and the strobe function through a dedicated button; it also allows the fixed switching on of the light with the subsequent possibility to vary its light power.

On the back, the aluminum cap has also a standard integrated power button that allows to use the flashlight normally (on and off), but that does not allow to select the light power or the STROBO light.

Diameter cap: 28.6mm
Total cable length: 307mm

Compatible only with models

P10i, P20i and P30i

Key Features:
* Ultralight powerbank with 10000 mAh capacity.
* IP68 waterproof, submersible to a depth of 2m and resistant to shocks and drops up to 1m in height.
* USB output channel with additional security mechanism for Nitecre headlamps
* LED residual power level indicator
* Operates in temperatures below -10°C / 14°F
* Weighs only 215 grams and is super compact, so you can take it anywhere.

Technical Specifications:
* Capacity: 1000mAh / 3.64V / 36.4Wh
* Length: 10.54cm
* Width and Thickness: 5x2.8cm
* Weight: 215g
* Micro USB Input: 5V-2A
* USB-A Output: (Single Port) 5V-2.4A / 9V-2A / 12V-1.5A - (Dual Port) 5V-2.4A (18W Max)

Supported Protocols:
* QC2.0/QC3.0 Output
* FCP/AFC/SFCP Input & Output
* MTK PE+1.1&2.0 Output
* BC1.2, Apple, Samsung Fast Charging

Perfect companion for extreme adventures!
Small, compact, lightweight and rugged, it's designed to follow you on every adventure. Thanks to the IP68 certification, it can withstand any environment, from the dustiest to the most humid, even going underwater up to 2 meters deep! Take it with you on your high altitude adventures, it can withstand extreme temperatures down to -10°C!

Designed for Nitecore headlamps!
Thanks to the integrated metal hook fully compatible with the new Nitecore headlamps - such as the HU60 - it allows a quick, safe and constant coupling between the headlamp and the battery pack so you'll never run out of light when you need it, even the most frantic!

*** WARNING: NOT COMPATIBLE WITH APPLE iPHONE ***

KEY FEATURES:

* Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months.
* Integrated charging system for Li-ion batteries via Micro-USB-C port
* NITECORE 21700 rechargeable 5,000mAh battery included in the package.
* Uses a CREE XHP35 HI LED with a maximum power of 2,000 lumens
* Maximum luminous intensity in the central point of 250,000cd. and maximum range of 1,000 meters.
* Glass and dishes with anti-reflection, crystal coating and PDOT (Precision Digital Optics Technology) treatments.
* USB-C remote control included in the package easily applicable that allows fixed light, temporary, strobe and change of powers.
* Built-in potentiometer with indicator light showing the remaining battery charge and voltage.
* Constructed of solid aircraft-grade aluminum alloy with military-specification anodization
* Waterproof and submersible IP68 (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. height

Power and duration certified in laboratory by ANSI/NEMA FL1 standard using 1x 21700 3.7V 5000mAh - under different conditions of use or using different batteries, data may vary

LED: 1x CREE XHP35 HI with a life cycle of 50,000 hours
Operating Modes: 5, electronically controlled + Beacon, Turbo and Strobe (the latter only using the remote control)
Powers and Duration: 2000 lumens (30min.) -> 1000 Lumens (1h 30min) -> 385 Lumens (4h) -> 85 Lumens (18h) -> 6 Lumens (100h) -> Beacon -> SOS
Peak power: 250000 candles
Maximum Lighting Distance: 1000m
Lighting Method: Rear Button with "Momentary On" system for light signal or by remote control
Light selection method: With the flashlight on, by pressing the front button "Mode" or by remote control
Head: aeronautical aluminum
Body: aircraft aluminum
Finish: Anodized, Type III
Lens: Ultra-clear hardened glass with anti-reflective treatment
Batteries: works with a rechargeable 21700 rechargeable battery "i-generation" (NL2150HPi, 5,000mAh) included in the package. If necessary it can also work with 2x CR123 3.0V but without being able to reach 2000 lumens of power
Measurements: 17.7cm (L) - 2.54cm (D shaft) - 6.5cm (D head)
Weight: 255.5g. excluding batteries
Accessories included: NL2150HPi battery, Cordura sheath, clip, RSW2i remote control, USB charging cable
Waterproof: as per IPX-8 standard, submersible up to 2m depth for 30min.
Sheath: cordura, belt, with velcro closure
Impact resistance: it resists falls from 1m height

Nitecore Italy Warranty: Torch guaranteed 5 years - Battery guaranteed 12 months

WHAT IS IT FOR?
The TSL10i is a rear cap equipped with a signal light expressly designed and only compatible with the Nitecore torches of the "i-Generation" series (such as the i4000R, P10i, P20i and others).

Offers multiple options for police-style blue, red, green, white and red / blue flashing signaling. During special operations or rapid deployments, the flashing colors are able to represent and indicate different groups to allow quick identification of the members of the various teams in specific positions.

HOW DOES IT WORK?
The TSL10i replaces the original rear cap of the torch, therefore it must be screwed in its place. It allows the torch to be controlled normally with the main power button and the secondary light selection button which also acts as "Strobe Ready".

The TSL10i also has a small additional button placed on the side that allows you to turn on, turn off and select the various flashing functions emitted by the cap itself. The cap is powered directly from the Nitecore "i-Generation" battery already present in the flashlight barrel.

FUNCTIONS AND DURATION:
Blue flashing for a continuous duration of 330h
Red flashing for a continuous duration of 360h
Green flashing for a continuous duration of 300h
White flashing for a continuous duration of 300h
Alternating Red / Blue Police Warning flashing for a continuous duration of 72h

Laboratory tested durations using a 5000mAh Nitecore 21700 "i-Generation" battery

COMPATIBILITY:
It only works with Nitecore flashlights equipped with an "i-Generation" battery (eg P10i, P20i, i4000 etc); it cannot be used with any other type of flashlight or battery.

KEY FEATURES:
* Revolutionary and extremely advanced keychain flashlight
* Uses 4 CREE XP-L2 V6 LEDs capable of producing a maximum light of 4,000 lumens
* Maximum peak intensity of 10.900cd and maximum illumination distance of 209m
* Uses a totally transparent optical lens to ensure uniform and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charge time etc.
* Built-in 1,000mAh Li-ion battery
* APC (Advanced Power Cut-Off) technology to minimize consumption when not in use
* Integrated Li-ion battery charging system via USB-C plug
* High efficiency circuits to ensure continuous lighting up to 67 hours
* 5 selectable brightness levels with direct access to TURBO mode
* Stores the last light mode selected by the user
* 2 adjustable lock levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and tears up to 30kg

TECHNICAL DATA:
Led: 4x Cree XP-L2 V6 with a life cycle of 50,000 hours
Brightness levels: 5 light powers, selectable with the appropriate dedicated button
Powers and Durations: 4000 Lumens (N.D.) -> 200 Lumens (2.45h.) -> 65 Lumens (7h.) -> 15 Lumens (21h.) -> 1 Lumen (67h.)
Peak of power: 10,900 candles
Maximum illumination distance: 209m.
Power on method: Power on and off button
Light selection method: Light selection button
Body: Aviation aluminum with HA III anodization degree
Battery: Integrated 1,000mAh Li-Ion type, equipped with integrated USB-C type charging system - The flashlight can stay on while it is charging
Measurements: 8.2cm (Length) - 2.92cm (Width) - 2.92cm (Thickness)
Weight: 77g. - clip and battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable included, power supply not included) - The flashlight can stay on while it is charging - In the charging phase, the LEDs under the buttons will show the status and will automatically turn off when recharging completed - The charging system automatically prevents undervoltage, overvoltage and has built-in short circuit protection. - The rear hook of the flashlight, with quick release and designed to anchor it to a key ring or other equipment, resists traction up to 30kg.

The first Nitecore flashlight that works with a powerbank and is controlled wirelessly via a wrist remote control!

KEY FEATURES:

• Adjustable and swiveling dual output headlamp for Spot and Flood light
• The Spot light uses 4 CREE LEDs with a maximum output of 1,600 lumens, an intensity of 6,570cd and a lighting distance of 162 meters
• The Flood light uses a CREE LED with wide angle illumination optics, up to 170 ° amplitude
• There are 10 adjustable and mixable Spot / Flood brightness levels
• Adjustable both directly on the torch and with a wireless remote control from the wrist
• 100 ° vertical tilt angle to meet different lighting needs
• Highly efficient constant current circuit provides stable light output
• Convenient USB-A socket, compatible with universal USB power sources
• ATR (Advanced Temperature Regulation) technology for temperature regulation
• Front band included, light and breathable
• Constructed from aircraft grade aluminum alloy
• Rugged HAIII military specification anodizing
• Resistant to water and dust as per IP67 standard
• Resistant to impacts and falls up to a maximum of 1m. in height

TECHNICAL DATA:

LED: 4x Cree XP-G3 S3 + 1x Cree E2 XHP35 HD with life cycle of 50,000 hours
Output 5 diffused light outputs and 5 deep light outputs, digitally adjusted, constant and mixable with each other as needed
Spot powers and durations: 5 lumens (45h.) -> 50 lumens (23h.) -> 200 lumens (9.30h.) -> 480 lumens (5h.) -> 1600 (4h.)
Flood powers and durations: 5 lumens (45h.) -> 50 lumens (21h.) -> 200 lumens (7.30h.) -> 480 lumens (4.30h.) -> 1200 (3h.)
Range: up to 162m.
Peak of power: 6570 candles
Usable batteries: powered by USB powerbank * (not included - sold separately) such as Nitecore F4 or Nitecore NB10000
Torch dimensions: 47.6x43.2x42.1 mm.
Weight: 142.5g (support and headband included, power supply not included)
Lens: hardened glass with anti-reflective treatment
Body: in aeronautical aluminum
Finish: anodized, Type III
Strap: elastic, adjustable in diameter and height
Water resistance: water resistant as per IP67 standard
Included Accessories: 2x USB Clip - Front Band - Wireless Wrist Remote Control

Note: The data shown was measured in accordance with the international ANSI / PLATO FL 1-2019 lighting test standard using a 5,000mAh Power Bank under laboratory conditions. The data may vary slightly in actual use conditions due to the type of power supply used, usage habits and environmental factors.

* Nitecore recommends using power sources with an output of at least 18W and QC system, otherwise the TURBO level will not be available.

FREQUENT QUESTIONS:
Q: is the flashlight compatible with the battery pack of the Nitecore HC70 model?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: Is the flashlight compatible with the Nitecore F1 / F2 / F4 charger / powerbank?
A: It is compatible, but it stops at 480 lumens of expressed power.

Q: is the flashlight compatible with the Nitecore NB10000 powerbank?
A: Yes, it is perfectly compatible and can produce 1600 lumens of power.

Key Features:
* Revolutionary and extremely advanced keychain flashlight
* Uses two LEDs capable of producing a maximum light of 500 lumens
* Maximum peak intensity of 2,000cd and maximum illumination distance of 89 meters
* Uses a totally transparent optical lens to ensure uniform and well distributed light
* Multi-function OLED display to indicate real-time information on lumens, battery voltage, remaining charge time etc.
* Built-in 280mAh Li-ion battery
* APC (Advanced Power Cut-Off) technology to minimize consumption when not in use
* Integrated Li-ion battery charging system via USB-C plug
* High efficiency circuits to ensure continuous lighting up to 60 hours
* 5 selectable brightness levels with direct access to TURBO mode
* 2 adjustable lock levels (Half Lockout Mode and Full Lockout Mode)
* Metal ring capable of withstanding weights and tearing up to 30kg

Technical data:
Led: 2x Osram P8 with a life cycle of 50,000 hours
Brightness levels: 5 light powers, selectable with the appropriate dedicated button
Powers and Durations: 500 Lumens (0.15h.) -> 200 Lumens (0.45h.) -> 65 Lumens (2.30h.) -> 15 Lumens (8h.) -> 1 Lumen (60h.)
Peak of power: 2000 candles
Maximum illumination distance: 89 m.
Power on method: Power on and off button
Light selection method: Light selection button
Body: Aviation aluminum with HA III anodization degree
Battery: Integrated 280mAh Li-Ion type, equipped with integrated USB-C type charging system
Measurements: 4.6cm (Length) - 2.5cm (Width) - 1.25cm (Thickness)
Weight: 18.8g. battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable and power supply not included in the package; compatible with power supplies and cables for smartphones and tablets commonly found); while charging, the integrated display will show the status. The charging system automatically prevents undervoltage, overvoltage and has built-in protection against short circuits. - The rear hook of the flashlight, designed to anchor it to a key ring or other equipment, resists a traction of up to 30kg.

Powers and durations certified in the laboratory by ANSI / PLATO FL 1-2019 standards

KEY FEATURES:

* 11 modes available with 5 light sources
* Possibility of continuous light or flashes in 5 different colors
* Built-in lithium-ion battery with a maximum autonomy of 50 hours
* Rechargeable with built-in USB-C port
* One-handed operation of the torch, via a single button
* An indicator light in the flashlight indicates the remaining battery charge (Patent No. ZL201220057767.4)
* Ultralight bracket, with Velcro hooks on the back
* Made of sturdy and quality plastic materials
* Extremely lightweight and pocket-sized design
* Withstands impacts and falls up to 1 meter in height

COMPLETE TECHNICAL SPECIFICATIONS:

Led: 5x high power LEDs, white, red, blue, yellow, green, with a life cycle of 50,000 hours
Operating Modes: 5 colored flashes and a special mode (police warning with blue / red light)
Powers and Durations: Red 3 lumen 50 hr - Green 8 lumen 50 hr - Yellow 9 lumen 50 hr - White 15 lumen 40 hr - Blue 2 lumen 40 hr - Red / Blue 40 hr

Power on and selection method: Central button for power on, off and light selection
Body: thermoplastic materials
Battery: integrated, not removable, 300mAh Li-Ion, rechargeable via MicroUSB-C plug
Torch measurements with bracket: 61.8mm (Length) - 28.9mm (Width) - 21.7mm (Thick.)
Torch weight: 24.5g.
Weight with bracket: 35.5g.
Accessories: support bracket with hooks for the front and rear velcro - USB charging cable
Water resistance: as per IP66 standard
Impact resistance: withstands drops from 1m in height
Note: -

Real powers and durations, certified in the laboratory by ANSI / NEMA FL1 standards

NU series product specially designed for law enforcement.
The NITECORE NU07 LE is a USB-C rechargeable mini sign light with 11 modes and 5 light sources with constant lighting or flashing red, green, yellow,
white / blue and red / blue police alarm.

The completely transparent shell makes the signals identifiable in all directions.

The flashing colors can indicate different groupings or allow for quick identification of team members in specific positions.

Thanks to the ARC adapter it can be attached to the helmet for special operations with quick and secure attachment.

Thanks to the innovative design of the rear clip, it can be easily attached to the standard MOLLE system.

The hook and loop attachment on the back of the bracket ensures a firm and secure fit.
The slots located on both sides of the bracket allow you to strengthen the attachment by fixing the helmet cable or the elastic to prevent accidental loss.

The single button interface is easy to use with a built-in 300mAh rechargeable lithium-ion battery allowing for up to 50 hours of runtime.

The waterproof design makes it IP66 rated.

The body is constructed of solid and durable PC materials with an ultra-light and compact design.

Ultra-transparent green filter with rubber body adaptable to different types of torches with 25 / 25.5mm diameter heads.

This filter transforms the beam of your flashlight into a green light that is excellent for use at the same time as night vision goggles and suitable for not frightening animals. Also suitable for tactical reading of maps and various documentation.

Compatibility:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Filtro azul ultra transparente con cuerpo de goma adaptable a diferentes tipos de antorchas con cabezas de 25 / 25,5mm de diámetro.

Este filtro transforma el haz de tu linterna en una excelente luz azul para ser utilizada al mismo tiempo que las gafas de noche y adecuada para no asustar a los animales. También es adecuado para la lectura táctica de mapas y documentación diversa.

Compatibilidad:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Ultra-transparent red filter with rubber body adaptable to different types of torches with 25 / 25.5mm diameter heads.

This filter transforms the beam of your flashlight into excellent red light to be used together with night vision goggles and suitable not to scare animals. Also suitable for tactical reading of maps and various documentation.

Compatibility:

NITECORE: P10 V2 - P12 - P12GT - P12GTS - MH10 - MH12 - MH12GT - MH12GTS - MH12 V2 - MH12S

Key Features:
* Ultra-light powerbank with a capacity of 5000 mAh
* IP68 waterproof, submersible up to 2m depth and resistant to shocks and falls up to 1m. in height
* USB output channel with additional safety mechanism for Nitecre headlamps
* LED residual power level indicator
* Works even in temperatures below -10 ° C / 14 ° F
* It weighs only 105 grams and is very compact, to be taken anywhere

Technical specifications:
* Capacity: 5000mAh / 3.6V / 18.2Wh
* Length: 10.24cm
* Diameter: 2.69cm
* Weight: 105g
* Micro USB Input: 5V-2A
* USB-A Output: 5V-2.4A / 9V-2A (18W Max)

Perfect companion for extreme adventures!
Small, compact, light and robust, it is designed to follow you on all your adventures. Thanks to the IP68 certification it resists any environment, from the dusty to the humidest, even managing to go underwater up to 2 meters deep! Take it with you even on your adventures at high altitude, in fact it resists extreme temperatures, down to -10 ° C!

Designed for Nitecore headlamps!
Thanks to the integrated metal hook fully compatible with the new concept Nitecore headlamps - such as the HU60 - it allows a quick, safe and constant coupling between the torch and the battery pack so as to never run out of light when needed, even the more excited!

*** WARNING: NOT COMPATIBLE WITH APPLE iPHONE ***

Accessory for Nitecore tactical flashlights made of aeronautical aluminum with HA III type military anodization, it is compatible with any flashlight that has a 1 "(2.54cm) diameter barrel.

Compatible with Picatinny rails, it has dimensions of 71mm (height) x 30mm (width) x 31mm (length) and a weight of 73g.

* Easy to attach and remove
* Central fixing screw that does not require tools
* Compatible with 1 "/ 2.54cm cylindrical shaft flashlights

Elegant, tactical and indestructible aluminum pen, also useful as glass breakers and for personal defense with "sliding shutter" coupling system.

* Weight: 20g
* Total length: 133mm.
* Material: aluminum
* Diameter: 9.3mm.
* Glass breaker tip: tungsten steel
* Ink: black with Refill Schneider Gelion 39.

Designed exclusively for Nitecore i4000R torches and Nitecore lighting systems of the 21700i series

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* Positive Pole: Flat and present on the lower and upper part of the flashlight
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
* Continuous Discharge Capacity: 15A

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for misuse or reverse polarity of the batteries

TORCH COMPATIBILITY
works only with NITECORE i4000R torches and NITECORE 21700i series lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

Designed for high power torches and devices that require a high amperage in the continuous discharge phase.

The new Nitecore NL2150HPR is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C type charging port so that it can be recharged directly using a USB charging cable (sold separately).

Just connect the battery to an available USB power source (for example to a PC or a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be complete.

Alternatively, these batteries can be charged normally, like any rechargeable battery, ie using any external charger compatible with 21700 Li-Ion batteries.

Equipped with built-in intelligent charging circuits and other safety features, this battery operates safely while following the precautions listed.

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltage and 4.25V overvoltage
* Continuous Discharge Capacity: 15A

USB Charging Voltage: 5V
USB Charging Current: 5A (Max)

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for misuse or reverse polarity of the batteries

TORCH COMPATIBILITY
recommended for the NITECORE E4K model

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

Led: 1x Osram P8 with a life cycle of 50,000 hours
Operating Modes: 4 light powers, selectable with the dedicated button + Warm white light + Warm white light flashing + Ultraviolet
Powers and Durations: 300 Lumens (0.30h.) -> 60 Lumens (1h.) -> 15 Lumens (4h.) -> 1 Lumen (40h.) -> UV -> CRI light -> CRI flashing
Power peak: 1260 candles
Maximum illumination distance: 71m.
Lighting method and light selection: Front button
Materials: aviation aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, equipped with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diam.)
Weight: 12g. - battery included
Accessories: steel ring for hooking to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light immersions
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via MicroUSB port (cable not included in the package)

The Tiki GITD will glow green in the dark after it has been illuminated by UV light.

Led: 2x Osram P8 with a life cycle of 50,000 hours and with a lighting diameter of 100 °
Operating Modes: 4 light powers, selectable with the dedicated button
Powers and Durations: 700 Lumens (15min.) -> 180 Lumens (1.30h.) -> 30 Lumens (8h.) -> 1 Lumen (50h.)
Power peak: 2100 candles
Maximum illumination distance: 74m.
Ignition method: Front on / off button
Light selection method: Front light selection button
Body: aviation aluminum with HA III anodizing degree
Batteries: Li-Ion, included, non-removable, equipped with an integrated MicroUSB type charging system
Measurements: 6.0cm (Length) - 2.45cm (Width,) - 1.38cm (Thickness)
Weight: 26g. - battery included
Accessories: double steel ring for hooking
Waterproofing: as per IP54 standard, it resists dust and light splashes of water
Impact resistance: withstands drops from 1m in height
Notes: Equipped with integrated charging system via USB-C port (cable not included in the package); during charging, an integrated LED will show the status and will automatically turn off when charging is complete. The charging system automatically prevents undervoltage, overvoltage and has an integrated protection against short circuits. - The rear hook of the torch, designed to anchor it to a key ring or other equipment, resists traction of up to 30 kg.

Powers and durations certified in the laboratory by ANSI / PLATO FL1-2019 standards

NITECORE NSH10 is a multipurpose carabiner made of TC4 titanium alloy.

Inspired by the design of the carabiner used as essential tools for rock climbing or bungee jumping, the NSH10 is a reliable tool for fixing or hanging external objects. Comfortable and versatile, it can be used as a key ring, bottle opener, hanging hook or flathead screwdriver.

Type of production: industrial
Country of production: China

Functions:

* keychain
* bottle opener
* hook
* open parcels
* flathead screwdriver

Material: titanium
Length and width: 49mm x 25.5mm
Thickness: 3.8mm
Weight: 7.5g

You can recharge it normally, inserting it in a charger or recharge it like a mobile phone: inserting a USB-C cable!

The new Nitecore NL2150R is a revolutionary 21700 type battery: it is in fact designed with an integrated USB-C charging port so that it can be recharged directly using a USB charging cable (sold separately).

Just connect the battery to a available USB power source (for example to a PC or to a wall charger for tablet or smartphone) and a red light next to the positive pole of the battery will light up to inform you that the charging process is started. As soon as the light turns green, charging will be completed.

Alternatively, these batteries can be charged normally, like any rechargeable battery, i.e. using any external charger compatible with Li-Ion 21700 batteries.

Equipped with integrated intelligent charging circuits and other safety functions, this battery works in complete safety respecting the precautions indicated.

 
BATTERY CHARACTERISTICS
* Rechargeable Li-Ion 21700 cylindrical battery
* Nominal voltage: 3.6V
* Capacity: 5000mAh
* USB charging voltage: 5V
* USB charging current: 5A (Max)
* Positive pole: Protruding
* PCB protection circuit for internal voltage protection
* PCB protection prevents 2.5V undervoltages and 4.25V overvoltages

BATTERY PRECAUTIONS
* Do not leave the batteries unattended during the charging phase
* Do not reload on carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries
* We are not responsible for incorrect use or with inverted polarity of the batteries

AVAILABILITY AVAILABLE FOR DELIVERY: from 20 July

ULTRAVIOLET LAMP WITH OZONE - STERILIZING SURFACE MAX 40m²

Key features:
* Removes up to 99.99% of spores, germs, viruses and bacteria. The lamp modifies pathogenic microorganisms, viruses, molds through UV light, DNA or RNA, preventing them from reproducing or being harmful. Ozone is a very active oxidant that destroys contact microorganisms, in addition ozone also acts as an environmental deodorant. One of the advantages of ozone is that it can be transported by air to places that UV radiation cannot directly reach.
* Effective against Coronavirus, Mushrooms, Rickettsia, Chlamydia etc.
* Broad spectrum, high potency germicide
* Sanitization with automatic shutdown for 15, 30 or 60 minutes
* Radial quartz lamps with UV-C ultraviolet technology
* Emission of O3 ozone cells for additional sterilization
* Radiation wavelength of 185nm and 254nm
* Simplified design for maximum functionality
* Easily transportable and positioned on flat or hanging surfaces
* Operating commands on the support base or by remote control
* Delayed start to allow the operator to safely leave

Sanitizing applications:
* Home environments
* Commercial structures (shops, offices, restaurants etc)
* Cold rooms
* Food processing plants
* Medical offices, veterinarians, hospitals and operating rooms
* Odor removal

Operating principles:
Germicidal lamps generate short-wave radiation of 185nm radially which, passing through the purest quartz, generate ultraviolet type C (UV-C) waves that are lethal to microorganisms. All surfaces touched directly by ultraviolet waves are therefore sterilized.
At the same time, radiation of 253.7nm produces abundant quantities of ozone (O3) in the surrounding air which, as a very active oxidant, destroys the microorganisms with which it comes into contact. This allows effective sterilization even on surfaces not directly touched by UV-C waves and on all textile surfaces, penetrating deeply and simultaneously eliminating any type of odor, acting as an environmental deodorant.

Technical data:
* Model: ZWXTD-02
* Body material: painted steel
* Lamp material: quartz
* Rated power: 40W
* Sterilizable surface: <40m²
* Operating voltage: 220V / 50Hz
* 40W lamp dimensions: 180x470 mm.
* Lamp weight 40W: 1030 g.
* Life cycle:> 8000 hours
* Control method: on the base or via remote control
* Power on: delayed by 10 seconds
* Operating timer: 15, 30 and 60 minutes

Manual or remote control operation:
1) Plug in the power outlet
2) press the button with the desired sterilization time
3) after 10 seconds, the lamp will turn on and remain active for the set time
ATTENTION: during sterilization the room must be left free by people and animals
4) at the end of the sterilization time, the lamp will automatically turn off
ATTENTION: before staying, ventilate the rooms for at least 40 minutes

Precautions for use:
* The lamp in operation emits ultraviolet radiation, dangerous for exposure, and ozone, dangerous for inhalation.
* Use only in unmanned rooms
* Dangerous for humans, animals and plants
* Do not look directly into ultraviolet light to avoid damage and photodermatitis
* Do not stand near the operating lamp
* Prolonged exposure to ultraviolet light can cause aging and burns to the skin
* Prolonged exposure to ozone can cause asthma and irritation to the respiratory tract
* Ventilate the room before staying to allow the ozone to escape
* Ozone can remain in the room for up to 30/40 minutes after the lamp is turned off

The UI1 charger is pocket-sized, fast and powerful; can automatically identify what type of lithium battery you have inserted and independently applies the correct charging voltage and the correct voltage. The optical charging system helps to keep everything under control by indicating both the percentage of charge reached and the charge finished. Very simple to use: just insert the battery, take care of everything else.

Features:
* Charges 1 cylindrical Li / Ion / IMR battery
* Automatic identification of the type of battery inserted
* Automatic voltage identification
* Automatic identification of the type of charge (CC, CV and TC)
* LED to monitor charging progress
* Automatic shutdown of the charge upon completion
* Protection against reverse polarity
* Optimal heat dissipation
* Can be used with any USB / MicroUSB cable (including packaging)
* CE and RoHS certifications

Technical specifications:
* Input voltage: 5V / 1A 5W
* Output voltage: 4.2V
* Current output: 1000mA
* Dimensions: 122.5x29.2x32mm.
* Weight without batteries: 40.5g.
* Compatible with IMR / Li-Ion batteries: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500,17650 , 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22500, 22650, 25500, 26500, 26650

Precautions:
* Do not recharge different types of batteries other than those indicated
* Do not leave batteries unattended during recharging operations
* With the batteries charged, remove the batteries from the charger to prevent the batteries from discharging

ATTENTION: the batteries shown in the photos are not included.

Model: MP25
Type: modular backpack
Capacity: 25L
Dimensions: 50 x 27 x 17 cm
Auxiliary compartment: suitable for 14 "laptop / tablet
Weight: 1.5 kg
Available colors: black

Technical features

- Premium YKK zippers
- Innovative cable holes designed on both sides
- Integrated laptop / tablet compartment
- UTX Duraflex buckles
- MOLLE system with laser cut for modular extensions
- Designed for commuters, hikers
- 500D nylon fabric resistant to wear and water
- 25 liter main compartment with full opening
- Interior design with a combination of ring surface and MOLLE system

Original Nitecore remote ignition control to be used by replacing the rear cap of your flashlight; ideal for use with the torch mounted under a firearm for hunting, tactical or soft-air use.

Once mounted, it allows the temporary switching on of the light by pressing the special remote rubber pad; the light will go out as soon as the pressure on the pad is stopped. It also integrates a standard power button on the side which allows the torch to be used normally.

Cap diameter: 28.6mm
Total length: 307mm

Compatible only with models:

NEW P12 - NEW P30

The NTR10 is a practical ring to be attached to the body of the torch via clips, which allows a more stable and secure grip even in the operating environment or with the use of gloves. The NTR10 maintains all the functionality of the metal clip and can also allow the torch to be carried in a pocket, belt or bag.
The NTR10 is compatible with almost all Nitecore torch models

Led: 1x Osram P8 with a life cycle of 50,000 hours + 1x UV Led + 1x HI CRI led
Operating Modes: 4 light powers, selectable with the specific dedicated button + UV + white Flood Light + Warning Flash
Powers and Durations: 380 Lumens (0.15h.) -> 145 Lumens (1h.) -> 38 Lumens (4h.) -> 1 Lumen (60h.) -> UV -> Flood Light -> Warning Flash
Peak power: 1260 candles
Maximum illumination distance: 71m.
Ignition method and light selection: Front button
Materials: aeronautical aluminum head, ABS body
Battery: Integrated 130mAh Li-Ion type, with integrated MicroUSB charging system
Measurements: 5.5cm (Length) - 1.47cm (Diameter)
Weight: 12g. - battery included
Accessories: steel ring for attaching to the key ring
Waterproof: as per IP66 standard, it resists dust, water and light dives
Impact resistance: withstands falls from 1m. of height
Note: Equipped with integrated charging system via MicroUSB port (cable not included in the package) - Additional 500mW and 365nm UV light - Additional "warm" white light HI CRI

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards

WHY CHOOSE IT:

Hunting / scouting use - Remarkable illumination depth 618m - Convenient charging system integrated in the battery - High autonomy thanks to the new 5000 mAh 21700 battery - Practicality and immediacy of the light selection controls.

KEY FEATURES:

* Italian Guarantee Nitecore Italy: Torch guaranteed 5 years - Battery guaranteed 12 months
* Charging system integrated in the Li-ion battery via Micro-USB port
* Rechargeable NITECORE 21700 battery (NL2150R, 3.7V, 5000mAh) included in the package
* Use a Cree XP-L HI V3 for a maximum output power of 1000 lumens
* Maximum light intensity in the central point of 95500cd. and maximum range of 618 meters
* Built in solid aeronautical aluminum alloy with anodized military specifications
* IP68 waterproof and submersible (up to 2m depth for 30min)
* Resistant to impacts and falls up to a maximum of 1m. of height

Powers and durations certified in the laboratory by ANSI / NEMA FL1 standards using 1x 18650 3.7 3400mAh - in different conditions of use or using different batteries, data may vary

Led: 1x Cree XP-L HI V3 with a life cycle of 50,000 hours
Operating Modes: 5 electronically adjusted + Strobo, S.O.S. and Beacon
Power and Durability: 1000 Lumens (1h 15min) -> 400 Lumens (4h) -> 220 Lumens (7h) -> 70 Lumens (23h) -> 1 Lumen (950h) -> Strobe -> SOS -> Beacon
Peak power: 95500 candles
Maximum illumination distance: 618m.
Ignition method: Rear Button
Bright selection method: Front Button
Head: aeronautical aluminum
Body: aeronautical aluminum
Finish: anodized, Type III
Lens: ultra clear hardened glass with anti-reflective treatment
Batteries: 21700 with micro-usb direct charging included in the package - compatible with: 1x 18650 3.7V or 2x CR123A disposable / rechargeable 3.0 / 3.7V batteries sold separately
Measurements: 15.5cm (L) - 2.54cm (D stem) - 5.0cm (D head)
Weight: 158g. - batteries excluded
Accessories: clip, wrist strap, belt cordura sheath, spare o-ring, anti-roll ring
Waterproof: as per IPX-8 standard, submersible up to 2m. of depth for 30min.
Impact resistance: withstands falls from 1.5m in height

Practical Cordura bag, light and resistant, designed for storing and transporting LED flashlights, folding knives, multi-purpose knives and multi-purpose pliers as well as keys, wallets, electronic objects etc.

Can be used over the shoulder, with a single shoulder strap or with MOLLE compatible attachments. Possibility to hook it to other backpacks to use it as an additional compartment. It offers two spacious compartmented compartments, closed independently with a zip.

Features and Materials:

- 600 denier Cordura Nylon water and abrasion resistant with Velcro compatible parts
- External treatment for fabrics that ensures resistance to dirt and facilitates maintenance
- Designed for daily use or for excursions
- Pockets with compartments to allow the housing of different tools
- Soft interior to protect housed tools
- Nylon internal elastic to better modulate the hosted tools
- Full ambidextrous operation
- MOLLE type rear coupling systems, in high-strength nylon
- Adjustable and removable Nylon shoulder strap
- Weighs only 300g
- Dimensions of 19x28.5x7.5cm