Year 2024
-
Made in Italy - JUNIOR EXPRESS - 3 Cup Coffee Maker
The express coffee maker is made entirely of duraluminum, a lightweight and durable material.
The special thickness of the bottom makes it suitable for any heat source except induction.Instructions for use:
- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.Cooking:
- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.Removal:
- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.
Maintenance:
- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.000321 -
Fatip - Safety Razor - METAL BLACK RETRÒ - Original Head - 110mm - 42117
The Metal Black Retro Original is a 3-piece safety razor distinguished by the classic lozenge handle design interrupted by the spherical base, elements that provide “grip” and handling to this tool.
It is made entirely of brass and then undergoes the process of metal finishing.
The razor is perfectly balanced and easy to use.
The open comb head ensures that the razor works well with different lengths of beard growth with a very thorough and deep shave.Total Length: 11cm
Handle Length: 9cm
Weight: 66g
Head width: 4.2cm
42117 -
Fatip - Safety Razor - The BIG - Original Head - 80mm - 42107
The Original Chrome Classic is a 3-piece safety razor distinguished by the classic Ionic column handle design that is interrupted by the elegant knurled base that facilitates the screw-on opening of the head.
It is made entirely of brass and then undergoes the metal finishing process.
The razor is perfectly balanced and easy to use.
The open comb head ensures that the razor works well with different lengths of beard growth with a very close and deep shave.
The Fatip Classic is one of the most internationally known razors becoming in effect a vintage shaving classic.Total Length 8.7cm
Handle Length: 7.8cm
Weight: 66g.
Head Width: 4.2cm
42107 -
MKM - Yipper - Black Top Shield CPM-MagnaCut & Black G10 - YP-GBK - knife
"Have you ever met a Yipper? You know a little dog that barks like the king of the prairie, but actually weighs less than a hamburger? A fierce puppy whose barking is worse than its bite! Here-I grew up in an area where coyotes yelp and howl at night. Their call is a bit eerie, perhaps frightening, but they are like those barking puppies: much ado about nothing. So when Igor Bortolussi of MKM asked me to design a knife, I started to design a knife that was a yipper: sharp teeth, but compassed appearance. An EDC knife that despite its name does what it's supposed to do and does it damn well!" - Ben Petersen
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Black Top Shield Coating
Handle: G10 with embedded stainless steel liners
Blade Length: 72mm.
Blade thickness: 2.5mm.
Length closed: 98mm.
Total length: 173mm.
Thickness when closed: 13mm.
Weight: 65g.
Closure: CrossBar Lock (AXIS Lock Modified)
Clip: stainless steel, deep pocket, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Ben PetersenMK-YP-GBK -
MKM - Yipper Knife - SW CPM-MagnaCut & Blue G10 - YP-GBL - knife
"Have you ever met a Yipper? You know a little dog that barks like the king of the prairie, but actually weighs less than a hamburger? A fierce puppy whose barking is worse than its bite! Here-I grew up in an area where coyotes yelp and howl at night. Their call is a bit eerie, perhaps frightening, but they are like those barking puppies: much ado about nothing. So when Igor Bortolussi of MKM asked me to design a knife, I started to design a knife that was a yipper: sharp teeth, but compassed appearance. An EDC knife that despite its name does what it's supposed to do and does it damn well!" - Ben Petersen
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Stonewashed
Handle: G10 with embedded stainless steel liners
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 98mm.
Total length: 173mm.
Thickness when closed: 13mm.
Weight: 65g.
Closure: CrossBar Lock (AXIS Lock Modified)
Clip: stainless steel, deep pocket, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Ben PetersenMK-YP-GBL -
MKM - Pocket Tango 2 - SW CPM-MagnaCut & Green Micarta - MK PT02-GC - knife
"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: Micarta
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by David C. AndersenMK-PT02-GC -
MKM - Pocket Tango 2 - SW CPM-MagnaCut & Black G10 - MK PT02-GBK - knife
"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: G10
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by David C. AndersenMK-PT02-GBK -
MKM - Pocket Tango 1 - SW CPM-MagnaCut & Black G10 - MK PT01-GBK - knife
"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: G10
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by David C. AndersenMK-PT01-GBK -
MKM - Vincent by Vox - SW CPM-MagnaCut & Denim Canvas Micarta - VCM-DC - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCM-DC -
MKM - Vincent by Vox - SW CPM-MagnaCut & Green Canvas Micarta - VCM-GC - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCM-GC -
Fatip - Safety Razor - NICKEL CLASSIC - Original Head - 80mm - 42105
The Original Fatip Nickel Classic is a three-piece safety razor, featuring a classic ion column handle that ends in a knurled base, facilitating the screw-on opening of the head.
Made entirely of brass, the razor is then finished with a high-quality metallic finish.
The Open Comb (open comb) head provides an extremely close and deep shave, adapting perfectly to different lengths of beard growth. The razor is perfectly balanced and easy to use.
It has a three-piece construction, allowing the head to be unscrewed and separated from the guard and handle to insert the razor blade.
This configuration is popular for ease of cleaning and maintenance.Weight: 66 g
Total length: 87 mm
Handle length: 78 mm
Head width: 42 mm
42105 -
Made in Italy - JUNIOR EXPRESS - 6 Cup Coffee Maker
The express coffee maker is made entirely of duraluminum, a lightweight and durable material.
The special thickness of the bottom makes it suitable for any heat source except induction.Instructions for use:
- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.Cooking:
- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.Removal:
- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.
Maintenance:
- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.000338 -
Bialetti - Set 3 gaskets with filter - 6 cups
Keep your Bialetti coffee maker looking its best with this set of original spare parts.
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.Package Contents:
- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee makerCompatibility: Suitable for Moka Express, Dama, Break and Moka Timer models
Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.
Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.
Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.
097437 -
Bialetti - Set 3 gaskets with filter - 12 cups
Keep your Bialetti coffee maker looking its best with this set of original spare parts.
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.Package Contents:
- 3 rubber gaskets
- 1 aluminum filter
- For 12-cup coffee makerCompatibility: Suitable for Moka Express, Dama, Break and Moka Timer models
Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.
Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.
Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.
097468 -
Fatip - Safety Razor - THE SMALL CHROME - Original Head - 80mm - 42100
The Piccolo Chrome Originale is a 3-piece safety razor distinguished by the classic Ionic column handle design that is interrupted by the elegant knurled base that facilitates the screw-on opening of the head.
It is made entirely of brass and then undergoes the metal finishing process.
The razor is perfectly balanced and easy to use.
The open comb head ensures that the razor works well with different lengths of beard growth with a very close and deep shave.
The Original Small Chrome is one of the most internationally known razors, becoming in effect a vintage shaving classic.Total Length: 8cm
Handle Length: 7.1cm
Weight: 70g
Head Width: 4.2cm
42100 -
MKM - Hero by Tommaso Rumici - SW M390 & Denim Micarta - MK-HR-DCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-DCT -
MKM - Hero Knife by T. Rumici - Titanium and Carbon Fiber - PRIVATE COLLECTION - MK HR-CFT - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos.
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-AP-HR-CFT -
Gerber - Sumo Black - Pivot Lock Layered G10 - 30-001814 - knife
Take it seriously: the Sumo is no joke! This oversized knife is the ultimate in practicality: it's easy to use, opens smoothly and offers an ambidextrous locking system that's easily operated with a simple, reliable pivot, and it's also particularly aesthetically appealing and packed with colorful details and accents.
The red ceramic-treated inner folders give an attention-grabbing pop, while the layered G10 offers great grip and plenty of hand room!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Darkwashed
Handle: made of layered G10, with liners and spacers made of red ceramic-treated steel
Blade length: 98mm.
Blade thickness: 3.3mm.
Length closed: 130mm.
Total length: 225mm.
Weight: 145g.
Closure: Pivot Lock (Axis Lock)
Clip: removable and reversible in painted stainless steel
Packaging: cardboard box with Gerber logos
Notes: -G30-001814