Year 2024

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

"Have you ever met a Yipper? You know a little dog that barks like the king of the prairie, but actually weighs less than a hamburger? A fierce puppy whose barking is worse than its bite! Here-I grew up in an area where coyotes yelp and howl at night. Their call is a bit eerie, perhaps frightening, but they are like those barking puppies: much ado about nothing. So when Igor Bortolussi of MKM asked me to design a knife, I started to design a knife that was a yipper: sharp teeth, but compassed appearance. An EDC knife that despite its name does what it's supposed to do and does it damn well!" - Ben Petersen

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel 
Blade treatment: Black Top Shield Coating
Handle: G10 with embedded stainless steel liners
Blade Length: 72mm.
Blade thickness: 2.5mm.
Length closed: 98mm.
Total length: 173mm.
Thickness when closed: 13mm.
Weight: 65g.
Closure: CrossBar Lock (AXIS Lock Modified)
Clip: stainless steel, deep pocket, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Ben Petersen

"Have you ever met a Yipper? You know a little dog that barks like the king of the prairie, but actually weighs less than a hamburger? A fierce puppy whose barking is worse than its bite! Here-I grew up in an area where coyotes yelp and howl at night. Their call is a bit eerie, perhaps frightening, but they are like those barking puppies: much ado about nothing. So when Igor Bortolussi of MKM asked me to design a knife, I started to design a knife that was a yipper: sharp teeth, but compassed appearance. An EDC knife that despite its name does what it's supposed to do and does it damn well!" - Ben Petersen

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel 
Blade treatment: Stonewashed
Handle: G10 with embedded stainless steel liners
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 98mm.
Total length: 173mm.
Thickness when closed: 13mm.
Weight: 65g.
Closure: CrossBar Lock (AXIS Lock Modified)
Clip: stainless steel, deep pocket, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Ben Petersen

"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: Micarta
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos. 
Notes: Design by David C. Andersen

"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: G10
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos. 
Notes: Design by David C. Andersen

The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel 
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX Voxnaes

The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel 
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX Voxnaes

The express coffee maker is made entirely of duraluminum, a lightweight and durable material. 
The special thickness of the bottom makes it suitable for any heat source except induction.

Instructions for use:

- Fill the bottom of the coffee maker with water until you reach the brass safety valve located on one side.
- Insert the funnel filter and fill it with ground coffee, without pressing it down.
- Make sure that the filter plate and gasket are properly seated in their seats at the top of the coffee maker.
- Screw the top firmly onto the bottom, ensuring a tight seal.

Cooking:

- For optimal coffee crema, use ground coffee and adjust the flame or heat source to the lowest setting, keeping the lid open throughout the boiling phase.
- After about four minutes, coffee will begin to fill the collector through the openings on the center column.

Removal:

- When the binder is full of aromatic coffee, remove the coffee pot from the heat. This helps prolong the life of the seals.

Maintenance:

- Wash the coffee maker with soap and water. Never use soda or potash, as they can damage the aluminum.
- To brighten the exterior of the coffee pot, use a commercially available liquid metal product.
- To ensure optimal operation at all times, perform a thorough cleaning of the coffee maker periodically.

Keep your Bialetti coffee maker looking its best with this set of original spare parts. 
Ideal for replacing filters and gaskets, this kit will make your moka pot like new again.

Package Contents:

- 3 rubber gaskets
- 1 aluminum filter
- For 6-cup coffee maker

Compatibility: Suitable for Moka Express, Dama, Break and Moka Timer models

Original Parts: Ensure the perfect fit and optimal performance of your coffee maker.

Easy Maintenance: Easily replace filters and gaskets to keep your coffee at peak quality.

Be sure to use only original Bialetti spare parts to extend the life of your coffee maker and ensure excellent coffee every time.

Product: Official Replica
Theme: Sleepy Hollow
Dimensions: Height 61 cm
Weight: 3 kg
Material: Steel
Packaging: Box
Limited Edition: Rare out-of-production item since 2005

Factory X's first replica from Tim Burton's film, "Sleepy Hollow," is The Axe of the Headless Horseman! Using the actual prop from the movie as a reference, Factory X has created an extremely accurate replica of the iconic weapon of the Headless Horseman.

Two feet long (about 61 cm), the Headless Horseman's Axe is made of the highest quality stainless steel and other materials, and comes with a ready-to-mount graphic wall plaque.