Guaranteed excellence: only the best brands

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Active insert for defense spray based on Caspicum (chili) - Fits only model Palm Defender ASP

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free port and free detention as It does not contain any kind of aggressive chemicals (Law 496/95)

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray anti-aggression based on Caspicum (chilli)

Dimensions and weight: 14.5cm long and 1.6cm in diameter, 58 gr. (Including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

Host - Wine Freeze - set of 4 universal glasses - REFRIGERATORS

HOST WINE PRODUCTS

The love for innovative design applied to the world of wine is the polar star of Host. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready.

Just pour and enjoy the well-deserved refreshment! The Freeze wine glass is ideal for enjoying both red and white wine: kept in the freezer for at least two hours, it keeps the wine at a temperature of between 6°C and 11°C;

If you keep it in the fridge, it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel which cools down when the glasses are placed back in the refrigerator. This ensures that the wine is at the right temperature for perfect tasting, especially in the warmer seasons.

An original idea that can be very useful for last-minute dinners, or for the ever-inconsiderate who forget to refrigerate bottles of fine wine in time.

Pack of 4 glasses in 4 different colours, capacity 250ml.

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Coltelleria Collini is the official distributor for Italy of White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 109g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Coltelleria Collini is the official distributor for Italy of White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 109g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 135mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 213g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Note: -

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 238g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closing: -
Clip: -
Sheath: in Kydex
Packaging: Wooden box with WRKT logos
Note: -

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 172g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket
Send feedback
History
Saved

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 250mm.
Thick when closed: -
Balancing: 1.5 cm backward
Weight: 232g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

The artisans of Berkel have created an exclusive series of switchblade knives. The search for steel for the blade and fine materials for the handle, make these knives real collectibles. These unique pieces are numbered one by one by Berkel's cut masters.

- Blade material: Damaged steel San Mai 67 VG10 (60/61 HRC)
- Blade length: 11 cm long blade
- Total length: 25.5 cm
- Weight: 78 gr
- Sharpening: Smooth
- Handle: Composed of two wooden grips. Decorated with glossy black logo.
- Notes: no box, with vinyl case.

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 90g.
Sheath: in Kydex
Packaging: cardboard box with WRKT logos
Note: -

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 238g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Note:

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Black
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex with flintlock
Packaging: Wooden box with WRKT logos
Note:

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Orange
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Note:

Designed for intensive use in real-life situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in paracord
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thickness when closed: -
Balancing: 1 cm back
Weight: 94g.
Closure: -
Clip: -
Sheath: in kydex
Packaging: cardboard box with WRKT logos
Note:

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 175
Blade thickness: 5mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balancing: 0.5 cm advanced
Weight: 320g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives.  The deep finger choil protects fingers while applying pressure whittling, cutting or chopping.  Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife.  Features a polished stainless steel divot for use with a fire bow.  This is a well-designed, great looking, and robust knife intended for serious work.

Blade Length:    5”

Overall Length:  10”

Blade Steel:       CPM S30V

Hardness:          59 HRC

Sheath:              Leather

White River Guarantee: If you are not 100% satisfied with this knife, send it back for free repair or replacement.

Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives.  The deep finger choil protects fingers while applying pressure whittling, cutting or chopping.  Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife.  Features a polished stainless steel divot for use with a fire bow.  This is a well-designed, great looking, and robust knife intended for serious work.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 172g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Notes: flask housed in a pocket of the sheath

The originality of the Home Line 200 lies in its innovative design: essentials and rounded lines define a nearly futuristic shape, exalted by the unmistakable red Berkel. Designed to impress and fascinate, but above all to be exhibited, its extraordinarily compact dimensions focus on materials and safety equipment and cutting quality inherited from the professional world.

Data sheet
- Cutting capacity (circular) 140 mm
- Dimensions up to 318x284x470 mm
- Engine power: 0.17 kW
- Cutting capacity (rectangular): 200 x 140h mm
- Blade diameter: 200 mm
- Weight: 12 Kg

light
The structure in a special aluminum alloy makes it particularly light but stable at the same time.

Home Line 200, A revolution in the world of electric slicers. It's the synthesis of Berkel engineer team know-how, functionality requirements, and high security standards. The Red Line 200 comes from Berkel's professional slicing technology and can guarantee unrivaled performance and safety levels: the chrome-plated steel blade with professional profile gives a perfect cut, reduces waste and ensures uniform slices.

The absence of edges and special equipment (such as the space for collecting small food leftovers and the plate that opens) make it extremely easy and quick to clean the machine.

Tradition meets innovation
The electric slicer with all the Berkel quality and professionalism and now innovative design. Reduced dimensions, ease of use and state of the art solutions ensure a perfect cut every day

For home use
RED LINE encompasses all the technology of professional Berkel meat slicers. This professional electric slicer for home use is elegant and lightweight and is made of a special aluminium alloy.
The steel blade ensures a perfect cut to make thin and even slices while reducing waste. The built-in sharpener enhances blade efficiency and durability. The slice deflector, blade cover, and meat table can be removed easily to ensure quick and accurate cleaning operations.
Red Line is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours.

Data sheet

- Cutting capacity (round) 178 mm
- Maximum size 650x520x450h mm footprint
- Engine performance: 0.17 kW
- Cutting capacity (rectangular): 185 x 175 mm
- Blade diameter: 250 mm
- Weight: 22 kg

Meat table removal
You can remove the meat table to clean it by simply moving the lever. Once you remove the meat table, the slicer automatically sets itself to safety mode and activates the CE lock. Putting the meat table back on unlocks the lever and makes the machine return to operating mode. An important innovation that allows the removal of the meat table with one swift movement and makes it easier to clean the slicer.

Blade cover removal
The blade cover is quick and easy to remove. All you have to do is rotate it by 90° and pull it out. This will make optimal cleaning an easy everyday task. Press the blade cover down gently to put it back into place ready for use.

Built-in sharpener
All Red Line slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position that does not require any adjustment, thereby ensuring the perfect angle for optimal sharpness.

Thickness adjustment knob
Red Line slicers are equipped with a built-in system that allows the gauge meat table to open up to 14 mm. The numbers on the adjustment knob refer to the actual thickness of the slice in millimetres. This allows for the highest precision in slice thickness adjustment (especially the thinnest and most common) with a the highest repeatability.

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade length: 26 cm
Total length: 41 cm
Weight: 126 gr
Sharpening: Smooth, toothless

Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

stand B2
The beauty deserves a pedestal.
A refined element which enhances the elegance of the historic slicer fly. The color of the pedestal is coupled to the slicer color choice. Some details could be different from what is shown in pictures

The Berkel Tribute flywheel slicer is a new slicer inspired by the historic Berkel B model (“Indianina”) of the ‘20s. A tribute to elegance and tradition for all those who use the machine intensely but like a sophisticated touch.

Technical data
Cutting capacity (round) 184 mm
Maximum slice thickness 3 mm
Cutting capacity (rectangular) 230 x 184h mm
Blade diameter 300 mm
Weight 60 Kg

The blade

The Tribute meat slicer has a 100cr6 steel blade with a 300 mm diameter and a 195 mm round cutting capacity. It allows for a slice thickness that ranges between 0 and 2 mm. The concave shape of the blade touches the product only at the cutting point, thereby preventing any alteration in taste and scent.

Built-in sharpener

The Tribute flywheel slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position, which ensures the perfect angle for optimal sharpness.

Top clamp locking/unlocking system

The double-column top clamp locking and unlocking device allows a perfect hold of the product on the meat table.

Blade protection device

Tribute is equipped with a protection device that covers the blade to ensure maximum safety while using or cleaning the machine.

Waste collection drawer

This machine has a drawer to collect the waste produced while slicing. Another measure that makes this machine even easier to use and clean.

Anodised aluminium meat table and stainless steel tray

The Tribute flywheel slicers are equipped with an anodised aluminium meat table and a stainless steel tray, which ensure durability and wear-resistance.

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 11 cm
Total length: 25 cm
Weight: 95 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 10 cm
Overall length: 22.5 cm
Weight: 70 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 18 cm
Overall length: 30.5 cm
Weight: 170 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

Already back in 1100 expert Japanese forgers combined different materials to confer superior and unprecedented cutting potential potential, resistance and flexibility upon Katana swords.
Inspired by this tradition, Berkel has created its own series of Japanese SanMai steel knives. The blade consists of a central layer of extremely hard VG-10 steel, which maintains sharpness over a long time, and two outer sheets in stainless damascus steel, with 33 layers per side, for greater resistance to corrosion and torsion.

Blade material: Stainless Damask San Mai 67 VG10 (60/61 HRC)
Blade length: 18 cm
Overall length: 30.5 cm
Weight: 170 gr
Sharpening: Smooth, toothless
Grip: Consists of two cheeks maple stabilized assembled with aluminum rivets

Italian production and design

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The manual flywheel meat slicer for those who want to bring a touch of class to their homes and tables. Its elegance brightens up the room, its perfect cut is a celebration of flavours. All this in a compact little jewel.

FLYWHEEL B2, the flywheel meat slicer for home use
Berkel B2, the compact manual flywheel slicer faithful to tradition. The vintage meat slicer, manufactured the traditional way, remains a jewel of the past. A precious and elegant furnish. The pride of gourmet connoisseurs. Its structure is not too heavy, making it ideal for a professional but not intensive use.
B2 has a blade with a 265 mm diameter. It is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours. Its accessories include the pedestal and flower flywheel, which makes it even more precious.
Some details may be different from those shown in the photos.

Technical data
- Cutting capacity (round) 160 mm
- Maximum overall dimensions 715 x 520 x 580h mm
- Maximum slice thickness 2 mm
- Cutting capacity (rectangular) 190 x 150h mm
- Blade diameter 265 mm
- Weight 33 Kg

The blade
Flywheel B2 has a 100cr6 steel blade with a 265 mm diameter and a 150 mm round cutting capacity. It allows for a slice thickness that ranges between 0 and 2 mm. The concave shape of the blade touches the product only at the cutting point, thereby preventing any alteration in taste and scent.

Built-in sharpener
The B2 flywheel slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position, which ensures the perfect angle for optimal sharpness.

Blade protection device
Flywheel B2 is equipped with a protection device that covers the blade to ensure minimum safety requirements while using or cleaning the machine.

Waste collection drawer
This machine has a drawer to collect the waste produced while slicing. Another measure that makes this machine even easier to use and clean.

Anodised aluminium meat table
The B2 flywheel slicers are equipped with an anodised aluminium meat table, which ensures durability and wear-resistance.

The manual flywheel meat slicer for those who want to bring a touch of class to their homes and tables. Its elegance brightens up the room, its perfect cut is a celebration of flavours. All this in a compact little jewel.

FLYWHEEL B2, the flywheel meat slicer for home use
Berkel B2, the compact manual flywheel slicer faithful to tradition. The vintage meat slicer, manufactured the traditional way, remains a jewel of the past. A precious and elegant furnish. The pride of gourmet connoisseurs. Its structure is not too heavy, making it ideal for a professional but not intensive use.
B2 has a blade with a 265 mm diameter. It is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours. Its accessories include the pedestal and flower flywheel, which makes it even more precious.
Some details may be different from those shown in the photos.

Technical data
- Cutting capacity (round) 160 mm
- Maximum overall dimensions 715 x 520 x 580h mm
- Maximum slice thickness 2 mm
- Cutting capacity (rectangular) 190 x 150h mm
- Blade diameter 265 mm
- Weight 33 Kg

The blade
Flywheel B2 has a 100cr6 steel blade with a 265 mm diameter and a 150 mm round cutting capacity. It allows for a slice thickness that ranges between 0 and 2 mm. The concave shape of the blade touches the product only at the cutting point, thereby preventing any alteration in taste and scent.

Built-in sharpener
The B2 flywheel slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position, which ensures the perfect angle for optimal sharpness.

Blade protection device
Flywheel B2 is equipped with a protection device that covers the blade to ensure minimum safety requirements while using or cleaning the machine.

Waste collection drawer
This machine has a drawer to collect the waste produced while slicing. Another measure that makes this machine even easier to use and clean.

Anodised aluminium meat table
The B2 flywheel slicers are equipped with an anodised aluminium meat table, which ensures durability and wear-resistance.

Tradition meets innovation
The electric slicer with all the Berkel quality and professionalism and now innovative design. Reduced dimensions, ease of use and state of the art solutions ensure a perfect cut every day

For home use
RED LINE encompasses all the technology of professional Berkel meat slicers. This professional electric slicer for home use is elegant and lightweight and is made of a special aluminium alloy.
The steel blade ensures a perfect cut to make thin and even slices while reducing waste. The built-in sharpener enhances blade efficiency and durability. The slice deflector, blade cover, and meat table can be removed easily to ensure quick and accurate cleaning operations.
Red Line is available in 3 standard colours: red, black, and cream, or in a wide range of custom colours.

Data sheet

- Cutting capacity (round) 170 mm
- Maximum size 650x520x450h mm footprint
- Engine performance: 0.17 kW
- Cutting capacity (rectangular): 185 x 160 mm
- Blade diameter: 220 mm
- Weight: 22 kg

Meat table removal
You can remove the meat table to clean it by simply moving the lever. Once you remove the meat table, the slicer automatically sets itself to safety mode and activates the CE lock. Putting the meat table back on unlocks the lever and makes the machine return to operating mode. An important innovation that allows the removal of the meat table with one swift movement and makes it easier to clean the slicer.

Blade cover removal
The blade cover is quick and easy to remove. All you have to do is rotate it by 90° and pull it out. This will make optimal cleaning an easy everyday task. Press the blade cover down gently to put it back into place ready for use.

Built-in sharpener
All Red Line slicers have a built-in blade sharpener. You can position the sharpener manually simply by lifting and rotating it. The sharpener has only one position that does not require any adjustment, thereby ensuring the perfect angle for optimal sharpness.

Thickness adjustment knob
Red Line slicers are equipped with a built-in system that allows the gauge meat table to open up to 14 mm. The numbers on the adjustment knob refer to the actual thickness of the slice in millimetres. This allows for the highest precision in slice thickness adjustment (especially the thinnest and most common) with a the highest repeatability.

The Collini Cutlery is the official distributor for Italy of White River Knife & Tool knives

Intended Use: Hunting / Sporting

Type of production: Artisan
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: Black
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closed: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos WRKT
Notes: -

White River Knife & Tool - Knucklehead - knife

Intended Use: Hunting / Sporting

Type of production: Artisan
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: Black
Handle: -
Blade length: 73mm.
Blade thickness: 3.5mm.
Closed Length: -
Overall length: 153mm.
Thick when closed: -
Balancing: -
Weight: 60g.
Closed: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos WRKT
Notes: -

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.