Knife - Essential Tool for Camping, Outdoor Adventure and collection

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Apocalyptic
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 148g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black PVD
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable (tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated into tang

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: G10 OD Green
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual...in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Apocalyptic, Dual Tone
Handle: Aluminum Natural Clear
Blade Length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 203 mm.
Blade thickness: 4.2 mm.
Total length: 324 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

Destination of use: tactical

Blade: stainless steel AUS 8A
Handle: titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 215mm.
balancing:
Weight: 124g.
Closing: frame lock
Opening: pinball
Clip: in steel
Sheath: Nylon
Design: by Jesse Jarosz
Production: Taiwan

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

Intended use: training knife with rounded edge and tip

Type of production: industrial
Blade: stainless steel W 1.4028 - 55-56HRC
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 160mm.
Blade thickness: 4mm.
Total length: 290mm.
Balancing: advanced to 1cm from the guard branch
Weight: 296g. (378g. With scabbard)
sheath: in ABS
Note: -

Destinazione d'uso: Neck Knife

Lama: in acciaio al carbonio 1095 58/59 HRC
Manicatura: -
Lunghezza lama: 81mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 172mm.
Bilanciatura: in coincidenza del ramo di guardia inferiore
Peso: 78g. (120g. con fodero)
Fodero: ABS
Note: inclusi 2mt di paracord

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

The Socom Elite sets the highest standards for tactical/utility cutlery. Since the inception of the original Socom in 1996, it has pioneered the entire line of Microtech folding knives. Over the years, many improvements have been made that have made the Socom more adaptable to different environments. You know you are buying the best tool on the market, regardless of which unique blade you choose: the clip point or the tanto. An integrated glass breaker at the base of the handle and a large pivot that allows easy opening with a glove add to its stature. The Socom's rugged reliability makes it the first choice of the special operations community.

Intended Use: Tactical/Military

Type of manufacture: midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Stonewashed
Handle: Anodized aluminum with textured non-slip inserts
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 133mm.
Total length: 230mm.
Thickness when closed:13mm.
Weight: 149g.
Closure: Sub Liner Lock
Clip: stainless steel, removable(tip down)
Packaging: cardboard box with Microtech USA logos
Notes: tungsten carbide frangible integrated in the tang

Released in 2023, the Stitch RAM-LOK debuted with the MSI (Microtech Standard issue) as the first Microtech blade equipped with its fantastic RAM-LOK technology. This rugged take on the sleeper latch features Microtech's distinctive stepped pattern, made famous by the Ultratech series of trigger switches.

The Microtech Stitch is a beautiful tactical collaboration between Tony Marfione and Sebastijan Berenji, AKA Borka. It takes Sebastijan's fantastic Stitch design and combines it with Tony's superb opening mechanisms to create one of the most beautiful manufacturing collaborations ever.

Intended Use: Tactical/Military

Production Type: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Black PVD
Handle: Textured aluminum
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 217mm.
Thickness when closed:15mm.
Weight: 156g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione & Borka Blades

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual--in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: G10
Blade length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Type: 2016 knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from packaging
* Commercial availability: Difficult to find
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and complete, with outer box
* Sheath: -
* Manuals, Certificates, and Warranty: Present and complete
Inspected and Certified by our internal laboratory

SHIN in Japanese means ‘trust’.

The SHIN is one of the largest folders in the Rockstead catalog and showcases all the typical and characteristic elements of the brand: aluminum handle with a pearl-radiant design, hardened anodization at 400 Vickers, and an insert of high-quality stingray leather (Samekawa).

This is a durable knife with strong cutting capabilities that maintains its edge for a long time. Even when used for rigorous cuts, the blade glides securely thanks to its particular sharpening.

The blade indeed has a HONZUKURI sharpening, convex on both sides, following the tradition of Japanese swords; this makes it both very sharp and sturdy, allowing it to cleanly cut a sheet of paper even after 1000 cuts through a very abrasive and resistant hemp rope.

A faithful companion for life, in which to place the utmost trust.

Blade: laminated stainless steel ZDP189 at 67HRC internally and VG10 at 61.7HRC externally
Handle: samekawa (genuine stingray leather) and aerospace-grade aluminum A6063S with black alumite treatment at 400Hv hardness
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 145g.
Lock: linerlock type, made of 402J2 steel at 50HRC
Clip: removable, made of 402J2 steel at 50HRC, with black alumite treatment at 400Hv
Notes: complete with warranty certificate and technical specifications

30th Anniversary Limited Edition with logo engraved on blade

From 30 years of relentless dedication comes the MSI® 30th Anniversary edition. This knife showcases the best of homegrown excellence. Every detail, from materials to finish, has been carefully crafted to reflect our deep-rooted passion for precision and quality. Crafted with care and expertise, this blade is a testament to our heritage, where American craftsmanship meets unparalleled innovation

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Stonewashed
Handle: Injection molded polymer
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 128g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: Limited edition commemorating Microtech's 30 years in business with 30th Anniversary logo engraved on the blade

The Microtech Stitch is a beautiful tactical collaboration between Tony Marfione and Sebastijan Berenji, AKA Borka. It takes Sebastijan's fantastic Stitch design and combines it with Tony's superb opening mechanisms to create one of the finest production collaborations ever.

Intended Use: Tactical/Military

Production Type: Midtech
Country of manufacture: USA
Blade: M390 stainless steel 60-61HRC
Blade Finish: Apocalyptic
Handle: G-10 Textured
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 217mm.
Thickness when closed:15mm.
Weight: 160g.
Closure: RAM-LOK (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione & Borka Blades