Last up date

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased and used.
* Condition: Overall in fair condition, with obvious cosmetic signs of wear that do not compromise its use
* Commercially available: Findable.
* Sharpening: Professionally re-sharpened.
* Marks on blade: several aesthetic signs of wear and abrasion.
* Marks on handle: small signs of abrasion.
* Box: -
* Scabbard: Present, with all accessories.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Jungle King is a sturdy multi-purpose knife manufactured by Spanish Aitor for survival use. With a high amount of accessories and mini survival kits in the sheath and handle, this knife is a perfect companion for outdoor uses. The metal end cap equipped with a compass, is unscrewable and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath is inotre housed a steel skinner knife.

Intended use: Survival / Collection

Blade: stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: hollow, metal, with screw back cap
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Scabbard: polymer and rope with multi-purpose inserts (compass - tourniquet - patches - pins - hooks - possibility of making a sling using the scabbard - bottle opener and more).
Packaging: -

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

For everyday carry enthusiasts who prefer a multi-purpose fixed-blade knife to a folder, the 203BT-01 Dacian™ is designed to be your perfectly sized companion for general purpose, outdoor recreation or EDC.

The super-strong, corrosion-resistant MagnaCut steel blade has a spear point profile and high sharpness for maximum cutting ability with a Blue Cerakote finish. The durable Canvas Micarta handle is constructed with deep finger grooves for extreme comfort in different grip positions. The 203BT-01 Dacian™ includes a contoured sheath with a high-retention clip for easy access whether carried in a pocket or on a belt.

Intended Use: Allrounder/Light Utility

Production Type: Industrial
Country of manufacture: USA
Blade: full tang in CPM-MagnaCut 60/62 HRC steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 89.9mm.
Blade thickness: 3mm.
Total length: 192mm.
Weight: 95.5g.
Sheath: Thermoplastic with Black Oxide clip
Packaging: Cardboard box with Benchmade logos
Notes: -

For everyday carry enthusiasts who prefer a multi-purpose fixed-blade knife to a folder, the 203 Dacian™ is designed to be your perfectly sized companion for general purpose, outdoor recreation or EDC.

The super-strong, corrosion-resistant MagnaCut steel blade has a spear point profile and high sharpness for maximum cutting ability. The durable Denim Micarta handle is constructed with deep finger grooves for extreme comfort in a variety of grip positions. The 203 Dacian™ includes a contoured sheath with a high-retention clip for easy access whether carried in a pocket or on a belt.

Intended Use: Allrounder/Light Utility

Production Type: Industrial
Country of manufacture: USA
Blade: full tang in CPM-MagnaCut 60/62 HRC steel
Blade Finish: Stonewashed
Handle: Micarta
Blade Length: 89.9mm.
Blade thickness: 3mm.
Total length: 192mm.
Weight: 95.5g.
Sheath: Thermoplastic with Black Oxide clip
Packaging: Cardboard box with Benchmade logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

Accommodating every challenge the field throws at it - big game or small game, backyard or base camp - the 15006-01 Steep Country was meticulously designed to meet hunter preferences. Versatile and tough as nails, the Steep Country fixed-blade knife is built to be used in any season on a variety of species and cuts. The durable Santoprene handle provides a generous grip in slippery conditions, even in inclement weather or field dressing, with superb handle texture. Equipped with multiple grip points, including the blade spine and handle rib, to make every last cut as easy and precise as the first.

Intended Use: Hunting/Light Utility

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade Finish: Satin finish
Handle: Santoprene
Blade Length: 89mm.
Blade thickness: 3mm.
Total length: 163mm.
Weight: 84g.
Sheath: kydex
Packaging: cardboard box with Benchmade logos
Notes: -

Survival in the wilderness can depend on the tools you carry: with an 11cm. fixed blade made of rugged CPM-CRUWEAR sintered steel hardened to 63/65HRC treated with Cerakote and an all-weather Carbon Fiber handle with a highly visible red G10 spacer, the 163BK Bushcrafter is purpose-built for all the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction and food preparation.

Redesigned with updated blade geometry and handle ergonomics to meet the demands of modern users, it can be kept handy in the modular thermoplastic sheath equipped with a push-button safety catch and a special recess for carrying a firestarter.

Intended Use: Utility / Hiking

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-Cruwear 63/65HRC sintered steel
Blade finish: Black Cerakote
Handle: Carbon fiber
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 203g.
Sheath: thermoplastic, modular, with push-button safety catch and tinder recess
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane Sibert

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Introducing the Benchmade Intersect fixed blade knife, a minimalist and durable cutting tool for anglers and adventurers. The Intersect boasts a drop point blade made from CPM MagnaCut steel, offering an ideal size for finer tasks, such as cutting tangled fishing line. Its compact nature does not compromise functionality, ensuring that even the most delicate tasks can be tackled with precision.

The knife is designed with a grooved handle and back to ensure a secure grip even in wet conditions. It comes with a quick-mount sheath, offering versatile attachment options to pockets, belts and backpacks.

Part of Benchmade's Water Class, the Intersect is a reliable companion for your water adventures without fear of corrosion!

Intended Use: Fishing / Diving / Boat / Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Santoprene
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 158mm.
Weight: 67g.
Sheath: Plastic polymers, with stainless steel deep carry clip
Packaging: Box set with Water series logos by Benchmade
Notes: the product is part of the new "Water Collection," launched on May 9, 2024

Benchmade's Undercurrent is a sturdy fixed blade designed to handle the rigors of marine use and withstand the corrosive properties of salt water. Made with a sheepfoot blade of high-quality CPM MagnaCut steel, the Undercurrent is capable of cutting fishing line, ropes and bait thanks to its partially serrated edge.

It comes with a Sonar Gray molded scabbard designed to be mounted versatile on your belt, backpack or boat. The sheath's push-button release provides quick and easy access to the knife.

Part of Benchmade's Water Class, the Undercurrent is a reliable companion for your boating and underwater trips.

Intended Use: Fishing / Diving / Boat / Outdoor

Production type: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Santoprene
Blade Length: 109mm.
Blade thickness: 3mm.
Total length: 239mm.
Weight: 152.50g.
Sheath: Plastic polymer, with push-button release
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024

Benchmade's Fishcrafter is an essential tool for anglers and outdoor enthusiasts. Designed for precision and ease of processing small to medium-sized fish, this filleting knife is a testament to Benchmade's commitment to quality.

The Fishcrafter features a razor-sharp SelectEdge blade expertly crafted from CPM MagnaCut steel. This particular steel provides the perfect balance of corrosion resistance and durability, making it ideal for the rigors of fishing. The thin blade profile, with a medium flex, allows for effective filleting, boning and cleaning. The knife comes with a molded Sonar Gray sheath designed with alternative mounting options and a small hole in the tip for drainage. Part of Benchmade's Water Class, the Fishcrafter is a reliable companion for your fishing adventures.

Intended Use: Fishing/Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Santoprene
Blade length: 230mm.
Blade thickness: 2.3mm.
Total length: 354mm.
Weight: 105g.
Sheath: Plastic polymer
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024

Benchmade's Fishcrafter is an essential tool for anglers and outdoor enthusiasts. Designed for precision and ease of processing small to medium-sized fish, this filleting knife is a testament to Benchmade's commitment to quality.

The Fishcrafter features a razor-sharp SelectEdge blade expertly crafted from CPM MagnaCut steel. This particular steel provides the perfect balance of corrosion resistance and durability, making it ideal for the rigors of fishing. The thin profile of the blade, with a medium flex, allows for effective filleting, boning and cleaning. The knife comes with a molded Sonar Gray sheath designed with alternative mounting options and a small hole in the tip for drainage. Part of Benchmade's Water Class, the Fishcrafter is a reliable companion for your fishing adventures.

Intended Use: Fishing/Outdoor

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Santoprene
Blade Length: 178mm.
Blade thickness: 2.3mm.
Total length: 302mm.
Weight: 80.5g.
Sheath: Plastic polymer
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.

The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.

Intended Use: Universal household and field kitchen knife

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade finish: Black DLC
Handle: G10 Green and Carbon Fiber
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikes

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

From field work to food preparation in the outdoor field kitchen, the 15505 Meatcrafter 4" derives from its full-size counterpart in terms of handle ergonomics and hybrid fixed blade profile, but offers a slightly smaller blade for even finer, more precise and detailed work.

The CPM-154 premium stainless steel blade with 14° SelectEdge is designed specifically for working with smaller animals such as game and poultry, with the perfect amount of blade for delicate cuts around the sternum.

With a Dark Olive Santoprene handle for a secure grip even in wet environments, the Meatcrafter 4" is a no-holds-barred cutting tool for the most experienced hunter.

Intended Use: Hunting / Meat Knife

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154 58/61HRC
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 102mm.
Blade thickness: 2.3mm.
Total length: 225mm.
Weight: 76.8g.
Sheath: Two-tone boltaron (one side black, one side orange)
Packaging: cardboard box with Benchmade logos
Notes: smaller and more compact version of the Meatcrafter modelo

Survival in the wilderness can depend on the tools you carry, and the 165-1 Mini Bushcrafter is a compact take on the classic outdoor bushcrafting knife, the most important tool in your kit.

With an 8.5cm. fixed blade made of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 165-1 Mini Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.

Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.

Intended Use: Utility / Hiking

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 85mm.
Blade thickness: 4.2mm.
Total length: 192mm.
Weight: 183g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane Sibert

Survival in the wilderness can depend on the tools you carry, and the 163-1 Bushcrafter is a reimagining of the classic outdoor bushcrafting knife, the most important tool in your kit.

With a fixed 11-cm. blade of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 163-1 Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.

Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.

Intended Use: Utility / Hiking

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane Sibert

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

When your field adventures transition to the kitchen, the right cutting tool can make all the difference!

The new 15500 Meatcrafter™️ is a fixed hybrid hunting knife with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-154 stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!

Intended Use: Hunting / Meat Knife

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-154 58/61HRC stainless steel
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 91.8g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -

The Flyway has proven to be the ultimate fixed blade for offshore game and waterfowl. The 15700-01 offers the ultimate in edge retention thanks to CPM-S90V steel, which will keep you in the field well into the season. To change things up even further, the ergonomic handle now includes OD green G10 gauntlets with orange rings for visibility, while the orange Boltaron sheath is perfect for attaching to a chest rig or stuffing into a backpack.

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -

Built on a solid foundation, the revamped 15201OR Altitude takes ultralight hunting gear to new levels. Incorporating feedback from our fans, this minimalist fixed blade features full-length carbon fiber sheaths for better blade control in CPM-S90V. This less than 50-gram machining tool earns its place at your side with a balance of corrosion resistance, strength, and edge retention.


Intended Use: Hunting

Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S90V (59/61HRC)
Blade treatment: Cerakote
Handle: stainless steel CPM-S90V with carbon fiber grips
Blade length: 78mm.
Blade thickness: 2.3mm.
Total length: 175mm.
Weight: 47g.
Sheath: made of Boltaron, for neck or compatible with M.O.L.L.E. type attachments.
Packaging: cardboard box with Benchmade logos
Notes: -

For the big game hunter who tracks their prey through the woods, every gram counts. Try the brand new 15600-01, an ultra-lightweight fixed blade knife designed to process large animals.

Building on the ergonomics of the 15600 model, the 15600-01 features an OD Green G10 handle that fits well in the hand and a reliable CPM-S30V stainless steel.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: USA
Blade: in CPM-S30V stainless steel (58-60)
Blade finish: Satin
Handle: G10 Green
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 45g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Notes: -

Proper preparation is the key to effective use of any defensive system. This is the mission of the 185T SOCP Fixed Blade Trainer, designed to perfectly mimic the weight and feel of a real sharp counterpart, but with a high visibility red 440C unsharpened blade and a G10 handle.

Intended Use: Training/Tactical

Type of production: Industrial
Country of Production: USA
Blade: unsharpened, 440C stainless steel
Blade treatment: High-visibility coating
Handle: G10
Blade length: 174mm.
Blade thickness: 3.8mm.
Length closed: 114mm.
Total length: 291mm.
Weight: 186g.
Sheath: Thermoplastic polymer
Packaging: Cardboard box with Benchmade logos
Notes: training knife with unsharpened blade

For the big game hunter who stalks prey through the forest, every gram counts. Try the brand new 15600OR Raghorn ™ ️, an ultralight fixed blade knife made for working large animals.

This lightweight hunting knife bares ultra sharp 14 degree CPM-CruWear®️ steel for exceptional cutting performance with high edge life. Cerakote®️ high visibility orange and lightweight carbon fiber add to an uncompromising hunting knife, ready and perfectly suited for any hunting use.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-CruWear® carbon steel (63-65)
Blade finish: Cerakote®️ orange
Handle: Carbon Fiber
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 22.5g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Note: -

When your field adventures transition to the kitchen, the right cutting tool can make all the difference!

The new Meatcrafter™️ is a hybrid fixed hunting blade with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-S45VN stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!

Intended Use: Hunting / Fishing / Sporting / Meat Knife

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S45VN 60/62HRC
Blade Finish: Satin
Handle: OD Green G10
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 128g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -

Game and waterfowl require a fixed scalpel-like blade and the all-new 15700 Flyway™️ is the right tool for the job. With the right length of blade in CPM-154, featuring SelectEdge with 14-degree penetrating sharpening, this knife is perfect for working your game. The solid, stable orange G10 handle boasts perfect ergonomics, while the two-tone Boltaron sheath makes it easy to slip into your backpack for river or creek trips. With surgical precision and efficient design, the 15700 Flyway™️ is the small game hunter's new best friend.

Intended Use: Hunting/Light Utility

Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM (58/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: kydex
Packaging: cardboard box with Benchmade logos
Notes: -

When your adventures in the field transition to the kitchen, the right cutting tool can make all the difference!

The new Meatcrafter™️️ is a hybrid hunting fixed blade with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-S45VN stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most challenging barbecues!

Intended Use: Hunting / Fishing / Sporting / Meat Knife

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN 60/62HRC
Blade Finish: High Visibility Orange
Handle: Carbon Fiber
Blade Length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 50.2g.
Scabbard: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Take the new Anonimus into the woods by keeping it by your side and you'll be ready to take on any adventure!

This fixed blade survival knife is ideal for bushcrafting thanks to the CPM-CruWear steel blade that offers excellent cutting and edge-holding capabilities combined with a deliberately low-profile aesthetic thanks to the matte finish of the Cerakote blade and a black Boltaron sheath with additional loop for a fire stick.

Intended Use: Bushcraft / Hiking / Utility

Production Type: Industrial
Country of Production: USA
Blade: Full tang tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Tungsten Grey Cerakote
Handle: G10
Blade length: 127mm.
Blade thickness: 2.9mm.
Total length: 249mm.
Weight: 168g.
Sheath: made of Boltaron, injection molded polymer, with additional loop to accommodate a fire stick. 
Packaging: cardboard box with Benchmade logos
Notes: -

Intended use: Tactical / emergency belt cutter

Production type: Industrial
Country of production: USA
Blade: Stainless steel 440C
Blade treatment: Teflon coated
Handle: 440C stainless steel
Blade thickness: 3mm.
Length closed: -
Total length: 166mm.
Weight: 51g. (77g. including scabbard)
Closure: -
Scabbard: Boltaron, M.O.L.L.E. compatible, ambidextrous
Packaging: Cardboard box with Benchmade logos
Notes: -

Intended use: tactical / emergency belt cutter

Type of production: Industrial
Country of production: USA
Blade: 440C stainless steel
Blade treatment: Teflon coated
Handle: 440C stainless steel
Blade thickness: 3mm.
Closed Length: -
Total length: 110mm.
Weight: 43g.
Closing: -
Sheath: in Boltaron, M.O.L.L.E. compatible, ambidextrous
Packaging: Cardboard box with Benchmade logos
Note: -

A new era for Adamas®! The last thing your gear needs is another bulky knife weighing you down, which is why the 375FE-1 Adamas® has been redesigned to be stronger than ever while keeping weight and bulk down.

Entirely machined from super-strong CPM-CruWear® steel with cobalt coating that offers enhanced corrosion resistance. In addition to the knife, the sheath has been redesigned to be secured with a low profile MALICE CLIPS®, allowing users to carry the knife on MOLLE® webbing or a standard belt.

Intended Use: Tactical

Manufacturing Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Cobalt Flat Earth
Handle: -
Blade Length: 106mm.
Blade thickness: 4.3mm.
Total lenght: 232mm.
Weight: 160g.
Scabbard: made of injection molded polymer, with fixing clip type Malice
Packaging: cardboard box with Benchmade logos
Notes: new version 2021 - in the package is included paracord for the handle

The Steep Country 15006 is a versatile hunting fixed blade, able to work in any season and on any animal species. The high visibility Santoprene handle makes it easy to keep track of the knife and provides excellent grip in any situation of use.

Intended use: Hunting / Light Utility

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade Finish: Satin
Handle: Santoprene
Blade length: 89mm.
Blade thickness: 3mm.
Total length: 197mm.
Weight: 85g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Note: -

The 15002-1 Saddle Mountain Skinner is a premium hunting fixed blade knife designed for hunters around the world. Light, handy and robust, this knife is effective on medium / large game. The sheath, redesigned from the previous version, creates a slim, comfortable and safe housing. Improved geometry, ergonomics and materials used, this Benchmade model will not disappoint the expectations of even demanding hunters.

Intended use: Utility / Hiking / hunting

Type of production: Industrial
Production Lama: USA
Blade: CPM-S90V stainless steel (59-61 HRC)
Blade treatment: Satin
Handle: Richlite / Orange G10
Blade length: 106mm.
Blade thickness: 3.5mm.
Total length: 221mm.
Weight: 121g.
Sheath: in Boltaron® Thermoplastics
Packaging: Cardboard box with Benchmade logos
Note: -

The 15017-1 Hidden Canyon Hunter is a premium hunting fixed blade knife designed for hunters around the world. With its compact but essential dimensions, this knife is effective on both large and small game. The sheath, redesigned from the previous version, creates a slim, comfortable and safe housing. Improved geometry, ergonomics and materials used, this Benchmade model will not disappoint the expectations of even demanding hunters.

Intended use: Utility / Hiking / hunting

Type of production: Industrial
Production Lama: USA
Blade: CPM-S90V stainless steel (59-61 HRC)
Blade treatment: Satin
Handle: Richlite / Orange G10
Blade length: 71mm.
Blade thickness: 3mm.
Total length: 163mm.
Weight: 85g.
Sheath: in Boltaron® Thermoplastics
Packaging: Cardboard box with Benchmade logos
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Type of production: Industrial

Country of production: USA
Blade: 440C stainless steel
Blade treatment: red
Handle: in 440C stainless steel
Blade length: 82mm.
Blade thickness: 4.5mm.
Total length: 184mm.
Weight: 65g.
Sheath: in ABS, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

This diving knife was originally developed for a military program.

Type of production: Industrial

Country of production: USA
Blade: stainless steel N690
Blade treatment: coated
Handle: made of plastic material (Rubberized Overmold)
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 72g.
Sheath: plastic material
Packaging: cardboard box with Benchmade logos
Note: -

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box

A compact knife for those who are looking to save space, it's truly about as much knife as you'll ever need for processing your harvest thanks to the large applied blade radius that excels at skinning and meat removal.

Designer: Benchmade
Mechanism: Fixed
Action: Fixed Blade
Blade Steel: CPM-S30V (58-60 HRC)
Blade Length: 2.67" (6.78cm)
Blade Thickness: 0.140" (3.56mm)
Length: 6.32" (16.05cm)
Handle Thickness: 0.58" (14.73mm)


Dymondwood Handle
Weight: 3.19oz. (90.43g)
Sheath Weight: 1.06oz. (30.05g)

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.

Intended use: Collection / Sports

Blade: 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing thread

Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.

Intended use: Collection / Sports

Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing thread

Intended use: Sport

Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handle

Intended Use: Sport / Hunting / Military

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:

Survival knife - News from the Swedish company larger than the A1 model.

Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.

- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheath

Intended Use: hunting / sporting

Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcaps

Intended Use: Sport / Hunting

Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numbered