Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Ago is the new fixed blade knife in the lionSTEEL EDC line for 2024. Featuring a slim and refined design, it is designed to be elegant and functional, ideal for everyday use. It comes with a sophisticated leather pocket sheath that enhances its portability.

The blade, made of M390 steel with a satin finish, offers top-level performance in terms of resistance and cutting, while the SOLID® handle integrates a titanium ferrule that also acts as a guard, ensuring strength and safety during use. The handle, available in different variants, stands out for its slender shape that allows for a versatile grip, suitable for different needs.

The knife is the result of the creative genius of Gianluigi “Wilson” Simonella, a master cutler with decades of experience, founder of the Italian Cutlers Corporation (CIC) and a craftsman of great prestige.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang, stainless steel M390 60/61HRC
Blade finish: Satin
Handle: Olive and Titanium
Blade length: 79mm.
Blade thickness: 4mm.
Total length: 177mm.
Balance: central
Weight: 85g.

Sheath: leather, belt, with vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife maker Gianluigi “Wilson” Simonella, a lifelong custom knife maker, as well as a craftsman of materials and a founding member of the Italian Knife Makers Corporation (CIC)

Ago is the new fixed blade knife in the lionSTEEL EDC line for 2024. Featuring a slim and refined design, it is designed to be elegant and functional, ideal for everyday use. It comes with a sophisticated leather pocket sheath that enhances its portability.

The blade, made of M390 steel with a satin finish, offers top-level performance in terms of resistance and cutting, while the SOLID® handle integrates a titanium ferrule that also acts as a guard, ensuring strength and safety during use. The handle, available in different variants, stands out for its slender shape that allows for a versatile grip, suitable for different needs.

The knife is the result of the creative genius of Gianluigi “Wilson” Simonella, a master cutler with decades of experience, founder of the Italian Cutlers Corporation (CIC) and a craftsman of great prestige.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang, stainless steel M390 60/61HRC
Blade finish: Satin
Handle: Micarta and Titanium
Blade length: 79mm.
Blade thickness: 4mm.
Total length: 177mm.
Balance: central
Weight: 85g.

Sheath: leather, belt, with vertical carry
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife maker Gianluigi “Wilson” Simonella, a lifelong custom knife maker, as well as a craftsman of materials and a founding member of the Italian Knife Makers Corporation (CIC)

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.

The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)

A pocket-sized and compact EDC knife featuring an M390 steel blade with a satin finish and a SOLID® (one-piece) handle with titanium ferrule.

The SOLID® handle is available in several variants, and its ergonomic shape fits the palm of the hand perfectly, allowing for very precise handling.

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: Full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Green Micarta and Titanium
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 150mm.
Balance: central
Weight: 57g. (99g. scabbard included)
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: design by the well-known knife-maker Gianluigi "Wilson" Simonella, a lifelong maker of custom knives, as well as a craftsman of material and a founding member of the Corporazione Italiana Coltellinai (CIC)

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

The M3 is a small-sized fixed blade knife, useful in any field activity and easily transportable.

The M3 comes with a satin finish Niolox steel blade. The detachable grips are available in Micarta.

The M3 is equipped with a handle machined with 3D milling machines to achieve optimal ergonomics. Added to this is the surface texture that makes the grip firmer. The handle screws are in stainless steel with Torx T8 tightening system.

The M3 is sold together with the Cordura sheath for the version with Micarta handle.

Type of production: Industrial
Production Lama: Italy
Blade: SB1 Niolox 61HRC stainless steel
Blade treatment: Satin
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 250g.
Closure: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with Lion Steel logos
Note: -

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

The M2M is a fixed blade hunting knife. Its small size and very low weight make it extremely handy and easy to carry.

Intended use: Sports, hunting

Type of production: Industrial
Production Lama: Italy
Blade: M390 stainless steel
Handle: Santos wood
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 202mm.
Balance: 2 cm back
Weight: 132g.
Sheath: leather
Packaging: cardboard box with Lion Steel logos

The M2M is a fixed blade hunting knife. Its small size and very low weight make it extremely handy and easy to carry.

Intended use: Sports, hunting

Type of production: Industrial
Production Lama: Italy
Blade: M390 stainless steel
Handle: Micarta Green
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 202mm.
Balance: 2 cm back
Weight: 148g.
Sheath: leather
Packaging: cardboard box with Lion Steel logos

The M2M is a fixed blade hunting knife. Its small size and very low weight make it extremely handy and easy to carry.

Intended use: Sports, hunting

Type of production: Industrial
Production Lama: Italy
Blade: M390 stainless steel
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 202mm.
Balance: 2 cm back
Weight: 161g.
Sheath: leather
Packaging: cardboard box with Lion Steel logos

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang, in stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: orange G10
Blade length: 73mm.
Blade thickness: 3.2mm.
Total length: 170mm.
Balancing: on the guard branch
Weight: 83g.
Sheath: in leather, for belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Notes: "Titanium Pearl" titanium ring fixed to the paracord strap

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

The B41 is a bushcraft fixed blade knife designed for multiple field uses and, at the same time, easy to handle due to its small size and low weight.

The B41 is equipped with a Sleipner steel blade with a stone-washed finish that allows, among other things, to carve the wood with ease. The knurled handle offers excellent grip. It has a flat shank on the back which can be rubbed on the flint to light the fire. This operation can be carried out in total safety by keeping the B41 tucked in its real leather sheath, perfectly shaped on its profile.

Type of use: hiking / bushcraft / light utility

Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang, in Sleipner 60 / 61HRC steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 104mm.
Blade thickness: 3.8mm.
Total length: 223mm.
Balancing: on the guard branch
Weight: 176g.
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Note: -

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Type of use: hiking / bushcraft / light utility

Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang, in Sleipner 60 / 61HRC steel
Blade treatment: Satin finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3.7mm.
Total length: 203mm.
Balancing: backward
Weight: 125g.
Sheath: leather, belt, with vertical port
Packaging: cardboard box with Lion Steel logos
Note: -

Recommended use: hiking / heavy utility

Type of production: Industrial
Country of production: Italy
Blade: full tang, in Sleipner 60 / 61HRC steel
Blade finish: Satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 410g.
Sheath: Kydex and Nylon, modular, multiposition, MOLLE compatible
Packaging: Cardboard box with Lion Steel logos
Note: -

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: Light Utility / Hiking

Type of production: Industrial
Country of production: Italy - Maniago
Blade: full tang, in M390 stainless steel 60 / 61HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 180g.
Sheath: in leather, made in Italy
Packaging: Cardboard box with Lion Steel logos
Note: version available from November 2019 with micarta handle (previously available only in wood or G10) - Design by Molletta

Intended use: Light Utility / Hiking

Type of production: Industrial
Country of production: Italy - Maniago
Blade: full tang, in M390 stainless steel 60 / 61HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 180g.
Sheath: in leather, made in Italy
Packaging: Cardboard box with Lion Steel logos
Note: version available from November 2019 with micarta handle (previously available only in wood or G10) - Design by Molletta

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

Type of production: Industrial

Country of production: Italy (Maniago)
Blade: full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Santos Wood
Blade length: 95mm.
Blade thickness: 4mm.
Overall length: 205mm.
Weight: 144g.
Sheath: leather, made in Italy
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Molletta

Type of use: hiking / hunting / light utility

Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang, stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Black G10
Blade Length: 73mm.
Blade thickness: 3.2mm.
Total Length: 170mm.
Balancing: on guard branch
Weight: 83g.
Sheath: leather, with vertical waistband
Packing: Cardboard box with Lion Steel logos
Notes: "Titanium Pearl" attached to the latch in paracord

Type of production: Industrial
Produzionea country: Italy
Blade: full tang, in Niolox stainless steel
Blade treatment: Blackwash
Handle: Micarta
Blade length: 128mm.
Blade thickness: 5mm.
Overall length: 252mm.
Weight: 274g.
Sheath: Leather
Packaging: cardboard box with logos LionSteel
Notes: -

Type of production: Industrial

Country of production: Italy (Maniago)
Blade: full tang, stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: G10
Blade length: 95mm.
Blade thickness: 4mm.
Overall length: 205mm.
Weight: 180g.
Sheath: leather, made in Italy
Packaging: Cardboard box with Lion Steel logos
Notes: Design by Molletta

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

The range of fixed blade knives Lion Steel has added a new model to 4.55 inches. The goal is to create a knife to all, easy to carry and effective use.

Type of production: Industrial
Production Lama: Italy
Blade: full tang, steel Sleipner 60 / 61HRC
Treatment Lama: PWD
Handle: G10
Blade length: 115mm.
Blade thickness: 4.5mm.
Overall length: 241mm.
Thick when closed: -
Weight: 245g.
Sheath: Cordura, modular, multi-compatible MOLLE
Packaging: Cardboard box with logos Lion Steel
Notes: Design by Molletta

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

The range of fixed blade knives Lion Steel has added a new model to 4:55 inches. The goal is to create a knife to all, easy to carry and effective use.

Type of production: Industrial
Production Lama: Italy
Blade: full tang, steel Sleipner 60 / 61HRC
Treatment Lama: Satin
Handle: Santos Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Overall length: 241mm.
Weight: 245g.
Sheath: Leather
Packaging: Cardboard box with logos Lion Steel
Notes: Design by Molletta

Type of production: Industrial
Production Blade: Italy
Blade: Full tang, stainless Sleipner 60/61HRC
Treatment Blade: TiNi
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 315mm.
Thick when closed: -
Balancing: -
Weight: 410g.
Closure: -
Clip: -
Sheath: Kydex and Nylon, modular, multi-position, MOLLE compatible
Packaging: Cardboard box with logos Lion Steel
Notes: -

Type of production: Industrial
Production Blade: Italy
Blade: Full tang, stainless Sleipner 60/61HRC
Treatment Blade: Satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 315mm.
Thick when closed: -
Balancing: -
Weight: 410g.
Closure: -
Clip: -
Sheath: Kydex and Nylon, modular, multi-position, MOLLE compatible
Packaging: Cardboard box with logos Lion Steel
Notes: -

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

Black Fighter - 02-1271 - knife
Blade: 1095 Carbon Steel 56 / 58HRC teflon
Handle: Kraton
Blade length: 200 mm.
Total length: 323 mm.
Blade thickness: 3.5 mm.
Length Closed: -
Weight: 350g.
Closed: -
Sheath: hard plastic
Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

Intended use: Military

Type of production: industrial
Blade: in steel D2
Blade treatment: teflon coating
Lama production: USA
Handle: Kraton
Blade length: 178mm.
Blade thickness: 4mm.
Length closed: -
Total length: 305mm.
Balancing: -
Weight: 350g.
Closure: -
Clip: -
Sheath: in kydex
Note: -

Intended use: tactical / military

Type of production: industrial
Blade: full tang in stainless steel AUS-8 57 / 59HRC
Blade treatment: nitriding
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: -
Total length: 145mm.
Balancing: -
Weight: 78g.
Closure: -
Clip: -
Sheath: ABS with clip
Note: -

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g.
Closing: -
Sheath: in kydex
Note: -
Send feedback
History
Saved
Community

Purpose: Sport / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 236mm.
Blade thickness: 4mm.
Total length: 360mm.
Balancing: set back - 2 cm. from the lower guard branch
Weight: 412g.
Closing: -
Clip: -
Sheath: in kydex
Note: -
Send feedback
History
Saved

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 130 mm.
Total length: 235 mm.
Blade Thickness: 3.5 mm.
Length Closed: -
Weight: 250g.
Closing: -
Sheath: Leather
Notes: -

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -