Last up date

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Commercially available.
* Sharpening: Professionally re-sharpened.
* Marks on blade: A few small signs of wear and tear.
* Marks on handle: None
* Box: -
* Scabbard: - -
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / Heavy Duty

Production type: Industrial
Country of Production: Japan
Blade: full tang, CoS rolled stainless steel at 60HRC
Blade treatment: satin finish
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 400g.
Sheath: made of ABS with safety system
Notes: previously purchased knife from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased and used.
* Condition: Overall in fair condition, with obvious cosmetic signs of wear that do not compromise its use
* Commercially available: Findable.
* Sharpening: Professionally re-sharpened.
* Marks on blade: several aesthetic signs of wear and abrasion.
* Marks on handle: small signs of abrasion.
* Box: -
* Scabbard: Present, with all accessories.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory.

The Jungle King is a sturdy multi-purpose knife manufactured by Spanish Aitor for survival use. With a high amount of accessories and mini survival kits in the sheath and handle, this knife is a perfect companion for outdoor uses. The metal end cap equipped with a compass, is unscrewable and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath is inotre housed a steel skinner knife.

Intended use: Survival / Collection

Blade: stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: hollow, metal, with screw back cap
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Scabbard: polymer and rope with multi-purpose inserts (compass - tourniquet - patches - pins - hooks - possibility of making a sling using the scabbard - bottle opener and more).
Packaging: -

Knife WITHDRAWN FROM PRIVATE COLLECTION

• Origin: Withdrawn from a private owner, previously purchased
• Condition: Overall in excellent condition
• Commercial availability: Still in production
• Sharpening: Factory edge
• Blade marks: /
• Handle marks: /
• Box: /
• Sheath: in excellent condition
• Manuals, Certificates, and Warranty: /
• Checked and Certified: by our internal lab

Idun is a deity in Norse mythology, known as the keeper of the apples of eternal youth. These magical apples grant immortality to the gods who consume them, keeping them eternally young and vigorous. Idun plays a crucial role in the Norse pantheon, as without her apples, the gods would begin to age. A famous myth tells of how Loki kidnapped her under the order of the giant Thjazi, causing the gods to age rapidly until her release. Her connection to youth and vitality makes her a central figure in Norse mythology.

• Intended use: Hunting / Light Utility
• Production type: Industrial
• Country of production: Sweden / Japan
• Blade: Laminated VG10 stainless steel
• Handle: Ox-Hide rings, guard and pommel in aluminum
• Blade length: 100mm
• Blade thickness: 5mm
• Total length: 220mm
• Weight: 170g
• Sheath: Leather, with vertical belt loop
• Packaging: -
• Notes: previously purchased knife from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A few imperceptible marks due to time.
* Marks on handle: None
* Box: Present
* Scabbard: Present, with a few small marks due to time.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Hunting / Sporting

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel rolled 3G (SGPS) 62HRC
Blade Finish: Satin finish
Handle: Micarta Brown
Blade Length: 90mm.
Blade thickness: 4.5mm.
Total Length: 195mm.
Weight: 180g.
Sheath: Brown Leather
Packaging: cardboard box with Fallkniven logos
Notes: previously purchased knife from a private collection

Drip.it+ bottle drainer

Length: 37.5cm - 56.5cm (extendable)

Width: 10.5cm

Weight: 358g

Stainless steel insert included

Material: silicone + stainless steel

Inventor: Susanne Richter (SanniShoo)

Cleaning likes to decorate... Everyday life around the sink.

drip.it offers the ideal solution for various ‘draining scenarios’. The stainless steel insert makes it the perfect mobile and easily stowable draining station for almost all types of reusable bottles. Whether glass bottles, modern thermo bottles or baby bottles.

Heat-resistant silicone rings protect the bottles from scratches. Up to three bottles can be drained at the same time with drip.it+. There is also space for bottle caps, brushes, sponges etc. on an extra shelf.

Freshly washed salad or cooked pasta can also be easily drained in the sieve (sieb.up) with the help of drip.it+. -drip.it+ is extendable and therefore fits perfectly on any sink.

This makes it ideal for use as a flexible colander holder for draining washed or cooked food over the sink. Fewer germs on the sink thanks to better drying bottles, dishcloths, sponges and brushes. A simple idea, but a real jack-of-all-trades that can do a lot.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in good condition
* Commercially available: Still in catalog
* Sharpening: Original, improvable
* Marks on blade: Small signs of wear
* Marks on handle: Small signs of wear and tear
* Packaging: Complete
* Scabbard: Present, with minimal signs of wear
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Fallkniven Three Kronor TK1

The “Three Kronor” line blends the latest martensitic technologies with the ancient roots of the Swedish royal family.
In fact, these knives are the only ones that can boast the royal symbol of three crowns placed on the blade and on the beautiful wooden box that contains the knife and sheath.
The rolled steel used is currently one of the best industrial steels on the market and is composed of an inner sheet of SGPS from powder, a steel already used for the U2 model, at 62HRC coupled with two outer sheaths of VG2. The knives thus reveal exceptional cutting, penetration and edge-holding qualities.

Blade: Three-layer rolled 3G steel (VG2 and SGPS “Super Gold Powder Stainless Steel” at 62 HRC)
Handle: Cocobolo wood
Blade length: 100 mm.
Blade thickness: 4.5 mm.
Total length: 215 mm.
Weight: 145 g.
Sheath: Black, leather

Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.

The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.

Intended use: allrounder utility 

Blade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpener

The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.

The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!

Intended use: hunting

Type of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -

STALEKS IS THE WORLD'S LARGEST MANUFACTURER OF BEAUTY INSTRUMENTS

STALEKS operates a modern, full-cycle manufacturing plant, where production processes range from the preparation of the metal bars to the packaging of the ready product.

The STALEKS product range comprises more than 50 items: from professional manicure instruments to leather accessories. Staleks is next-generation technology that meets the highest professionalism: the ultimate combination for perfect instruments. Staleks Pro is the high quality line of professional instruments for beauticians

Staleks -  Nail Clipper For Ingrown Nails PODO 30 18 mm - NP-30-18

Podiatric nail clipper for ingrown nails.

Blade length 18 mm. 

Total length:

Special narrow and thin operating part to access nail corners.

Safe" blunt tips prevent the risk of injury.

Designed for easy and gentle removal of ingrown nail.

Suitable for removing the free edge of thin, soft nails.

Flawless sharpening and complete closure of cutting edges.

Professional multi-level sharpening, performed manually by the specialist.

Exclusive elongated handles with wavy finger grooves.

Comfortable positioning and reliable attachment of the tool to the hand during use.

Double spring is durable and ensures smooth tool stroke.

Smooth and easy tool travel due to the perfect fit and grinding of the joint planes.

Ease and simplicity of tool maintenance due to the special inverted rivet.

Extra corrosion resistance of the tool, ensured by polishing with GOI paste.

High-alloy stainless steel.

Resistant to dry oven and autoclave sterilization.

Can be subjected to disinfection by special means.

Recommended for medical pedicure.

STALEKS IS THE WORLD'S LARGEST MANUFACTURER OF BEAUTY INSTRUMENTS

STALEKS operates a modern, full-cycle manufacturing plant, where production processes range from the preparation of the metal bars to the packaging of the ready product.

The STALEKS product range comprises more than 50 items: from professional manicure instruments to leather accessories. Staleks is next-generation technology that meets the highest professionalism: the ultimate combination for perfect instruments. Staleks Pro is the high quality line of professional instruments for beauticians

Staleks Pro is the high quality line of professional nail studio tools.

Pedicure and manicure nail instrument

• Staleks Expert nail clipper 60 - 12 mm.
•  The long, robust blades without tilt (12 mm) make the Staleks Expert 60 nail clipper ideal for working on thick nail plates
• Blade length: 12 mm
• Handle length: 9,5 cm
• Total length: 12,5 cm
• Specific product for thick and ingrown nails
• Material: stainless steel -
• Also suitable for left-handers -
• Wavy handle for a precise hold 

STALEKS IS THE WORLD'S LARGEST MANUFACTURER OF BEAUTY INSTRUMENTS

STALEKS operates a modern, full-cycle manufacturing plant, where production processes range from the preparation of the metal bars to the packaging of the ready product.

The STALEKS product range comprises more than 50 items: from professional manicure instruments to leather accessories. Staleks is next-generation technology that meets the highest professionalism: the ultimate combination for perfect instruments. Staleks Pro is the high quality line of professional instruments for beauticians

Pedicure and manicure tool for ingrown nails - Staleks Expert 61 nail nipper - 16mm.

Long, sturdy blades without tilt (16mm) make the Staleks Expert 61 nail clipper ideal for working on thick nail plates and removing ingrown nails.

Features:

Blade length: 16mm

Handle length: 10 cm

Total length: 13 cm

Special product for thick and ingrown nails

Material: stainless steel

Also suitable for left-handers

Wavy handle for a precise hold

STALEKS IS THE WORLD'S LARGEST MANUFACTURER OF BEAUTY INSTRUMENTS

STALEKS operates a modern, full-cycle manufacturing plant, where production processes range from the preparation of the metal bars to the packaging of the ready product.

The STALEKS product range comprises more than 50 items: from professional manicure instruments to leather accessories. Staleks is next-generation technology that meets the highest professionalism: the ultimate combination for perfect instruments. Staleks Pro is the high quality line of professional instruments for beauticians

EXPERT 80 NE-80- 6 is a professional cuticle cutter This cutter is designed; specifically for the precision required in cutting skins used for skin care and aesthetics. The cutter's design is optimised to ensure precise and clean cuts. The handle is ergonomically designed to provide a comfortable and secure grip during use. This is especially important when working on details or sensitive areas of the skin.

Recommended use: leather cutter.

Country of manufacture: Ukraine

Grip: Ergonomic handle

Packaging: Plastic bag

Material: Stainless steel

High quality

Spring: Double

Size: 6 mm.

Total length: 13 cm

STALEKS IS THE WORLD'S LARGEST MANUFACTURER OF BEAUTY INSTRUMENTS

STALEKS operates a modern, full-cycle manufacturing plant, where production processes range from the preparation of the metal bars to the packaging of the ready product.

The STALEKS product range comprises more than 50 items: from professional manicure instruments to leather accessories. Staleks is next-generation technology that meets the highest professionalism: the ultimate combination for perfect instruments. Staleks Pro is the high quality line of professional instruments for beauticians EXPERT 20 NE-20-8 is a professional cuticle cutter This cutter is designed specifically for the precision required in cutting leather used for skin care and aesthetics. The design of the cutter is optimised to ensure precise and clean cuts. The handle is ergonomically designed to provide a comfortable and secure grip during use.

This is especially important when working on details or sensitive areas of the skin. -Recommended use: leather cutter.

Country of manufacture: Ukraine

Grip: Ergonomic handle

Packaging: Plastic bag

Material: Stainless steel

High quality

Spring: Double

Size: 8 mm.

Total length: 11 cm

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory

Intended Use: Hiking / All round utility

Blade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather case

Intended use: Hiking / Hunting

Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -

Diamond sharpener excellent for recovering the sharpness of blades with particularly hard steels

Rod length of 30cm. and total length of 43cm.
Thermoplastic handle and steel ring.

Quality level: high

Diamond sharpening with two different sharpening grits.

The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.

For cleaning, use dish soap and warm water.

Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.

Dimensions of the diamond part:
10 cm x 2 cm

Total open size with plastic handle:
22 cm

Closed size:
12 cm x 3 cm
Weight: 67 gr

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steel

Intended use: sporting

Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010. 

Intended use: collectible/sporty

Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon 
Notes: -

The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.

Intended use: collection / sports

Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -

Intended use: Hiking / Hunting / Collection

Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Gouge 22 can be used for details such as fingers, mouth, lips, eyes etc ...

Gouge measures: total length about 24.5 cm
Production: Switzerland

4 different sizes are available from 1 to 4mm

Guarda tutti i prodotti Pfeil a questo link: PFEIL

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Curved gouge n.11A

Gouge measures: total length about 24.5 cm
Production: Switzerland

7 different sizes are available from 1 to 10mm

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Curved gouge n.7A

Gouge measures: total length about 24.5 cm
Production: Switzerland

10 different sizes are available from 4 to 30mm

Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
Community

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Non-stainless steel tools, for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully hand-sharpened, and all equipped with wooden handles. Palm gouge for working wood
Set consisting of 6 pieces
Height with wooden handle: 128mm
Blade height: 73mm

Country of production: Switzerland.

Measurements in the package:

L 5/3
L 7/6
L 7/10
L 9/5
L 11/1
L 12/1

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For carving lettering and ornamentation and for sculpting figures.

Gouges serie 16 - 35°

Gouge measures: total length 24.5 cm

They are provided 4 different measures from 1 to 8 mm

Pfeil G paste for polishing blades, chisels and gouges

- Dimensions: 210x60mm

- Weight about 900 grams

Tools in non-stainless steel, for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles. Handheld gouge for working wood
Set of 8 pieces
Height with wooden handle: 135mm
Blade height: 80mm

Measures included in the package:
Production: Switzerland

L 1/8
L 1s / 8
L 1a / 8
L 5/8
L 11/3
L 12a / 4

Pfeil gauze fabric bag composed of 10 gouges

Closed dimension: 30cm x 11cm

Weight: 1030 gr.

The 10 different models of gouges in the package:

- 1/8
- 1s / 8
- 5/8
- 5/20
- 7/6
- 7/14
- 7L / 20
- 8/4
- 8a / 10
- 9/10
- 11/3
- 12/6

Pfeil gauze fabric bag consisting of 10 gouges and 2 accessories

Closed dimension: 30cm x 10cm

Weight: 1330 gr.

Present accessories:
- 1x Kerb 12
- 1x pencil

The 10 different models of gouges in the package:

- 1s / 10
- 1s / 20
- 1s / 30
- 3/35
- 4/20
- 5/12
- 7/10
- 7/35
- 11/5
- 11/10

Pfeil carving knives bag in fabric

4 pieces

- Schaller knife SchG

- Schaller knife SchK

- Canard carving knife CaG

- Canard carving knife CaK

Pfeil fabric bag with gouges

Closed dimension: 30cm x 23cm

Weight: 3000 gr.

Present accessories:
- 80mm diameter wooden hammer
- Two Arkansas grinding stones
- Oil
- Brienz Carving Knife

The 20 different models of gouges present in the package:
- 1/16
- 1s / 16
- 2/20
- 3/3
- 3/12
- 3/25
- 5/35
- 7/20
- 8/7
- 8/18
- 8/25
- 9/7
- 8th / 18
- 9/15
- 7L / 25
- 11/2
- 11/10
- 15/3
- 12/10
- 14/8

Destination of use: Hiking / Hunting

Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box

No stainless steel tools, for sculpture and woodwork, all tempered with final hardness between 59-61 RC, sharpened and ready, and all with wooden grip. PDAs gouges for woodworking.
Set consists of 8 pieces.
Height with wooden handle: 135mm
Blade height: 80mm

Production: Switzerland

Measures included in the package:

B2/12
B4/12
B7L/12
B8/10 
B9/7 
B11/7 
B15/6 
B25/10

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For shaping recesses and working in corners.

Gouges serie 8L

Gouge measures: total length 24.5 cm

They are provided 9 different measures from 4 to 35 mm

Pfeil G paste for polishing blades, chisels and gouges

- Dimensions: 210x60mm

- Weight about 900 grams

For smaller hands and beginners tackling basic projects. Exact same quality and features as our full-sized chisels. 85 mm blade length, 200 mm overall length.
Contents: pfeil chip carving knive pfeil, 3 medium-sized tools.

D 1/8, D 8/7, D 12/6, pfeil

Size: 260 x 130 mm

Weight: 160 g

Blade length: 85 mm
Overall length 200 mm

wooden support with rigid black leather jacket for sharpening gouges, chisels and sgalpelli Pfeil
Dimensions: 300x40x20 mm

Bag fabric door gouges Pfeil

Closed size: 30cm x 23cm

Capacity: max 12 pieces

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

White beech with steel ferrules. Blade is chrome vanadium steel, finely honed and polished razor sharp. 25° bevel.

Gouge measures: total length 29ncm

Bag fabric door gouges Pfeil

Closed size: 30cm x 13cm

Capacity: max 12 pieces

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For large pieces. Hornbeam handle, ergonomic design, heavy-duty ferrules.

Gouge series Heavy 50

gouge measures: total length about 29 cm - blade width 5cm - 310gr weight.
Production: Switzerland

7 different models are available

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 200 mm
- Blade length: 60mm
- Weight: 46g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 200 mm
- Blade length: 60mm
- Weight: 40g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 183 mm
- Blade length: 40mm
- Weight: 33gr

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 135 mm
- Blade length: 35mm
- Weight: 23g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 135 mm
- Blade length: 3cm
- Weight: 26g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 165 mm
- Blade length: 5,7
- Weight: 40g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 3,5
- Weight: 22g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 3,5
- Weight: 22g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 4,5
- Weight: 23g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 145 mm
- Blade length: 6
- Weight: 28g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive.

carbon steel blade

measures:
- Total length of about 155 mm
- Blade length: 5
- Weight: 28g

Production: Switzerland

These tools are of the best quality steel, ground and polished, ready for use. With fine cherry wood handles. The shape and size of the wooden handles correspond to the special use of each knive

carbon steel blade

measures:
- Total length of about 183 mm
- Blade length: 4
- Weight: 24gr

Production: Switzerland