Last up date

The slim profile and carbon fiber handle provide comfortable and lightweight carry for the Zero Tolerance 0545. Moreover, the 0545 model is appropriately sized for serious cutting tasks. The CPM MagnaCut steel blade is balanced and highly performant.

Aesthetically, this ZT Original boasts a clean design without visible screws for the pocket clip.

Produced in the United States, the premium CPM MagnaCut steel of the blade, achieved through powdered metallurgy, excels in edge retention, corrosion resistance, wear resistance, and toughness; the stonewashed finish helps conceal signs of use.

The blade opens easily and effortlessly thanks to the KVT system with ball bearings, washers, and flipper.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut Steel 60-63 HRC
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 81mm
Blade thickness: 2.3mm
Closed length: 109mm
Overall length: 190mm
Weight: 57g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: BlackWash
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: Stone Washed
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thick when closed: 14mm
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Satin & Stonewashed
Handle: Stonewashed Titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Closed thickness: 12mm.
Weight: 152g.
Closing system: Frame Lock
Clip: deep carry type, removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type or through lost ambidextrous on the blade, on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Treatment Blade: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Dmitry Sinkevich - Opening KVT ball-bearing - LIMITED EDITION

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: Stainless Steel CPM-S35VN 59/61HRC
Treatment Llama: Stonewashed
Handle: Carbon Fibre
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Overall length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Note: Opening system Speedsafe

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition, minor marks on clip and hardware.
* Commercially available: Discontinued
* Sharpening: Factory sharpened, can be improved.
* Marks on blade: None
* Marks on handle: Small marks on clip and hardware.
* Box: /
* Scabbard: /
* Manuals, Certificates and Warranties: / /
* Checked and Certified by our in-house laboratory

Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel S35VN
Blade finish: Satin finish
Handle: G10 and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: not present
Notes: previously purchased knife from a private collection - made in collaboration with Emerson Knives - Patented Wave opening system

KNIFE WITHDRAWN FROM A PRIVATE COLLECTION

* Origin: Withdrawn from a private individual, previously purchased
* Condition: like new
* Commercially available: no longer in production
* Sharpening: original
* Marks on blade: -
* Marks on handle: -
* Box: NO
* Sheath: NO
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory

Intended use: Tactical/Military

Type of production: Industrial
Blade production: USA
Blade: CTS204P stainless steel
Blade treatment: -
Handle: Carbon Fiber and Titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Total length: 216mm.
Thickness when closed: 13mm.
Balance: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, in stainless steel
Sheath: -
Packaging: cardboard box with Zero Tolerance logos
Notes: in collaboration with Emerson Knives - Patented Wave opening system

Intended use: Collection / Outdoor

Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:

* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers

Packaging: cardboard with Aitor logos

Knife from a private collection - Iconic and sought after model designed by Ken Onion and Mick Strider - Out of production and no longer available - Perfect in all, like new, serial 1544, does not have any kind of sign or defect - The knife shows an uncertainty at the tip, on the sharpening, which is slightly different; presumably already produced in this way by ZT - The sharpening is good and shows no signs of wear, presumably the sharpening is the original factory - Accompanied by original Zero Tolerance box, but referred to the model 0301 with green G10 handle - Checked and certified by our internal laboratory

Intended Use: Collection / Tactical / Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-S30V
Blade Finish: Tigerstripe - Tungsten DLC Coating
Handle: Titanium and G-10 with 3D finish
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thickness when closed: 17mm.
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Package: Cardboard box with Zero Tolerance logos (the box refers to a different model, 0301)
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system - Like new - Retired from prvated collection

Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.

Intended use: Tactical / Allround

Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Black
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | Smashing

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Black DLC Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thick when closed: 14mm
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: "Sprint Run" Limited Edition available while stocks last - Design by Gustavo T. Cecchini by GTC Knives - KVT opening on ball bearings - SLT Spring Loaded Tab opening system

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: U.S.A.
Blade: CPM-20CV stainless steel
Blade treatment: coated & machine satin finish
Handle: Black carbon fiber with aluminum spacers
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 126mm.
Total length: 221mm.
Thick when closed: -
Weight: 122g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Sinkevich & Rexford

Intended use: Tactical / Military

Type of production: Industrial
Lama production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, made of stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Ball bearing opening KVT Ball Bearing System - Opening by Carson Flipper system

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Length closed: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 139g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run edition available while stocks last - Design by Dmirty Sinkevich - KVT opening on ball bearings

Intended use: Tactical / Military

Type of production: Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Blackwash
Handle: Blackwash Titanium and White and Black Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: FrameLock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening by Carson Flipper system - Limited edition of Sprint Run

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: Black DLC
Handle: Titanium with DLC treatment
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 190mm.
Weight: 126g.
Closing: FrameLock with stainless steel knocker
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearings - Limited edition Sprint Run

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-S90V stainless steel
Blade treatment: Tan DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2018 edition available while stocks last

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: S35VN stainless steel
Blade treatment: Black Tungsten DLC
Handle: Titanium with Black Tungsten DLC finish
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 11.5mm.
Weight: 95g.
Opening: Carson Flipper system
Washers: in steel, with KVT ball bearings
Closure: FrameLock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by R.J. Martin & Matt Martin - Sprint Run 2018 edition available while stocks last

Intended Use: Tactical/Military

Production Type: Industrial
Blade Manufacturing: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade Length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on KVT Ball Bearing System - Opening by Carson Flipper System

Purpose: Sportsman / Collectibles

Type of production: Industrial
Blade Production: U.S.A.
Blade: Stainless steel CPM 20CV
Blade Treatment: Blackwash
Manicure: Titanium with anodized spacers
Blade Length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Overall length: 193mm.
Closed thickness: 14mm.
Weight: 176g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

Purpose: Sportsman / Collectibles

Type of production: Industrial
Blade Production: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade Treatment: -
Manicure: Titanium and G10 Black
Blade Length: 82mm.
Blade thickness: 3mm.
Closed length: 111mm.
Overall length: 187mm.
Closure thickness: -
Balance: -
Weight: 72g.
Closure: Frame Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT Opening on Ball Bearings - Limited Edition

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

Special Edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made from specially Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, cover-clips are handmade.

Use: Collection / Sports

Type of production: Industrial with handmade parts
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: matte black DLC
Handle: Titanium with matte black DLC treatment
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thickness when closed: 14mm.
Weight: 164g.
Lock: Frame Lock
Clip: Removable, Multi position, anodized titanium
Packaging: box with logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper

Intended use: sports / tactical

Type of production: Industrial
Production Country: USA
Blade: In-CPM S90V stainless steel
Blade Treatment: matt black DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3 mm.
Closed Length: 123mm.
Overall length: 213mm.
Thickness when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run in 2017 in a limited edition - Opening KVT on ball bearings - Opening Carson Flipper System

Intended use: tactical / sports

Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel 59/61HRC
Blade finish: dual tone - stonewashed and satin
Handles: rose bronze titanium and black G10
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: 2017 Sprint Run Edition - Design by Dmitry Sinkevich - Opening on KVT ball-bearing system

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stonewash
Handle: Carbon fiber and titanium
Blade length: 83mm.
Blade thickness: 3mm.
Closed Length: 112mm.
Overall length: 191mm.
Thick when closed: -
Weight: 65g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings - Opening system Carson Flipper

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, and custom parts made specifically by Hinderer in his workshop. Specifically, the entire titanium screws, spacers, clips, cover-clips and all the parties in purple coloration are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial handcrafted pieces
Production Lama USA
Blade: stainless steel M390
Blade treatment: matt black DLC
Handle: Titanium with matte black DLC finish - screws and spacers purple anodized titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Weight: 159g.
Lock: Frame Lock
Clip: Removable, Multiposition, anodized titanium
Packaging: collectible box with logos Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper - Curiosity: the warranty certificate is erroneously reported the CTS-204P steel; the company then decided instead to produce the knife using a stainless steel M390

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium Anodized gray with black trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium
Blade length: 99mm.
Blade thickness: 3mm.
Closed Length: 123mm.
Overall length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closing: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Opening KVT on ball bearings

Intended use: Sports / Collection

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: stonewashed
Handle: G10 on stainless steel folders
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 215mm.
Thick when closed: 14mm.
Weight: 198g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Les George - Opening KVT on ball bearings

Intended use: Tactical / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CTS-204P 60 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 225mm.
Weight: 145g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearings

Intended use: EDC / Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 111mm.
Overall length: 187mm.
Weight: 68g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearings

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium black anodized, with green trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel S35VN
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Zero Tolerance and Rick Hinderer teamed up to build the new 0562 with its exclusive Hinderer "slicer" grind.

The ELMAX® powdered steel blade with flat-ground “slicer” grind provides both slicing efficiency and a tough point. ELMAX is a third-generation powdered steel with virtually no nonmetallic inclusions. This means it offers an extremely uniform distribution of carbides for high wear and corrosion resistance. Zero Tolerance sharpens it to a hair popping edge and the ELMAX ensures it holds that edge for a long time, even under hard use.

The knife opens with a flipper and moves out of the handle on our smooth KVT ball-bearing opening system. A washer with caged ball bearings surrounds the pivot and makes opening the knife nearly frictionless; just pull back on the flipper and add a roll of the wrist and the 0562 is ready for action.

The handle has a G-10 textured scale in front and a stonewashed titanium back. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization so the lock won't overextend.

The unique pocketclip is reversible (left/right) and enables extra-deep carry in the pocket. .

Zero Tolerance - Hinderer Slicer Frame Lock - Stonewashed - ZT0562 - knife

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax
Treatment Blade: Stonewashed
Handle: Stainless Steel and G-10 Black
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Balancing: -
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - opening system Speedsafe

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel CTS204P
Treatment Lama: -
Handle: Carbon fiber and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 178g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production Country: USA
Blade: stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwash
Handle: Titanium and G-10 finish 3D
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Overall length: 224mm.
Weight: 168g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT ball-bearing - Hinderer Lockback Stabilizer

Intended use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: stainless steel Elmax
Treatment Lama: Black DLC Coating
Handle: G-10 and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 182g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented Wave

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Carbon Fibre with folders in stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Intended use: Tactical / Military

Type of production: Industrial
Production blade USA
Lama: In steel CPM-S30V
Blade treatment: Coating Blackwash
Handle: G-10 folder with stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system Speedsafe

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: CPM-S35VN Stainless steel 
Treatment Blade: Bladewash Tungsten DLC Coating
Handle: Stainless Steel and Black G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 113mm.
Overall length: 196mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 150g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening system Speedsafe

Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachment

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Stone Washed
Handle: G-10 with 3D finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 195mm.
Thick when closed: 13mm.
Balance: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Tungsten DLC Coating
Handle: G-10 with 3D finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 195mm.
Thick when closed: 13mm.
Balance: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Washed Tungsten DLC Coating
Handle: Titanium and G-10 Washed with 3D finish
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thick when closed: 17mm.
Balance: -
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system

Zero Tolerance - Hinderer Folder Titanium - ZT560 - knife

Intended Use: Tactical / Military

Type of production: Industrial
Production Lama USA
Blade: Stainless steel Elmax 59/61HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10 with 3D finish
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 224mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT on ball bearings - Hinderer Lockback Stabilizer

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos