Last up date

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon fiber and laminate titanium liners with G10 and G10 in orange spacer
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 188mm.
Thick when closed: 13mm.
Weight: 116g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Peter Carey - opening via Carson Flipper system on ball bearings

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: Teflon
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Balance: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended use: Utility / Hunting

Type of production: Industrial
Country of production: Seki - Japan
Blade: Stainless Steel VG-10
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 72mm.
Blade thickness: 2.5mm.
Closed Length: 106mm.
Overall length: 175mm.
Thick when closed: 10mm.
Weight: 102g.
Closure: Front Lock
Clip: reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Paul Alexander

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: U.S.A.
Blade: stainless steel CPM S110V
Handle: G10
Blade length: 102mm.
Blade thickness: 3.7mm.
Length closed 140mm.
Overall length: 242mm.
Thick when closed: 15mm.
Weight: 122g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos

Intended use: Sports

Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Ciondolo ferma filo realizzato in pesante peltro lavorato a fusione

Dimensioni: 1.5x1.3x1.3cm

Originale Spyderco - Made in USA

Intended use: EDC / Neck Knife

Type of production: Industrial
Production Country: Japan
Blade: Stainless Steel H1
Blade treatment: Satin finish
Handle: FRN
Blade length: 65mm.
Blade thickness: 2 mm.
Overall length: 126mm.
Weight: 26g.
Sheath: Boltaron (plastic) with steel chain to wear around my neck
Packaging: cardboard box with Spyderco logos
Notes: Design by John Shirley and Sam Owens

Intended use: Tactical / Martial

Type of production: Industrial
Production Country: Taiwan
Blade: Full tang, stainless steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Overall length: 197mm.
Weight: 102g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Packaging: cardboard box with Spyderco logos
Notes: Design by Craig Douglas, aka "Southnarc"

Intended Use: Training

Type of production: Industrial
Production Country: Japan
Blade: Stainless steel AUS-6
Blade treatment: Satin finish
Handle: FRN
Blade length: 109mm.
Blade thickness: 4mm.
Overall length: 241mm.
Weight: 146g.
Sheath: Boltaron (plastic) with Tek-Lok coupling
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal Glesser - Exemplary discontinued and no longer available, one piece at our disposal

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: Full Tang, Stainless Steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 104mm.
Blade thickness: 3mm.
Overall length: 199mm.
Weight: 111g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Tactical / EDC

Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 79mm.
Blade thickness: 4mm.
Closed Length: 114mm.
Overall length: 192mm.
Thick when closed: 11mm.
Weight: 113g.
Closure: Front Lock
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with stainless steel liners drowned
Blade length: 77mm.
Blade thickness: 3mm.
Closed Length: 101mm.
Overall length: 178mm.
Thick when closed: 13mm.
Weight: 74g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Brad Southard - Opening on ball bearings - opening via Carson Flipper system

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Titanium and Carbon Fiber with marble effect
Blade length: 94mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 218mm.
Thick when closed: 12mm.
Weight: 145g.
Closing: Framelock
Clips: stainless steel, removable
Packaging: cardboard box with Spyderco logos
Notes: Design by Filip De Leeuw

The smell of freshly ground coffee beans - simply wonderful!

The fragrance of freshly ground coffee beans – simply wonderful! And the invigorating specialities that confident coffee aficionados make out of them are even more delicious... AdHoc developed the MRS. BEAN coffee grinder so that grinding your favourite varieties is effortless. It works manually using an energy-efficient crank handle but otherwise has nothing to do with great-grandma’s old-fashioned hand grinder with its totally modern and very stylish look in elegant stainless steel and acrylic design. MRS. BEAN is equipped with a high-performance CeraCutXL® grinder that preserves the flavour and produces large amounts. With the help of the six PRECISE+® grinding settings on the outside, results can be achieved from powder fine to coarse according to your preference and depending on which preparation method you are going to use. The grinder container holds approx. 50 grams of coffee beans. The collection container is designed for approx. 25 grams (on setting 2) of coffee powder and can easily removed by unscrewing. As a result, you can enjoy technical features with MRS. BEAN that makes grinding coffee beans a real pleasure.

And the invigorating specialties that convinced coffee lovers prepare from them are even more delicious...

Adhoc has developed the MRS BEAN coffee grinder

so that grinding your favorite varieties is easy.

It works manually using an energy-saving hand crank, but is otherwise nothing like great-grandma's old hand mill, but with its sleek design of stainless steel and acacia wood it is thoroughly modern and very stylish. Ms. BEAN features the CeraCutXL ® high-performance coffee grinder for aroma-preserving grinding and high yield. With the help of the 6-fold PRECISE+ ® external grinding degree setting, results can be achieved at will, from powdery to coarse, depending on your preferred brewing method.

Filling is done by simply pulling out the grinding crank.

The grounds container holds about 50 grams of coffee beans.

After grinding, fresh ground coffee falls into the grounds container, which is designed for about 25 grams of ground coffee (with a grind of 2).

This amount is sufficient for up to 4 cups of coffee.

The collection container is easily removable; it is unscrewed by simply rotating it.

Approximate dimensions: diameter - 6 cm,

diameter with handle:14.6 cm,

height:21.8 cm.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Sport / Collection

Type of production: Industrial
Production blade: Use
Blade: Stainless steel CPM-S30V Steel Powder
Blade treatment: Black TiNi
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Length closed: 121mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 108g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: discontinued product and hard to find, very rare that you can find the version with black blade plain edge

Intended use: Sport / Collection

Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade treatment: beaded blast
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 119mm.
Overall length: 197mm.
Weight: 133g.
Locking system: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Serge Panchenko

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -

Intended use: Sport / EDC

Type of production: Industrial
Country of production Taiwan
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Titanium
Blade length: 33mm.
Blade thickness: 3mm.
Closed Length: 51mm.
Total length: 84mm.
Thick when closed: 4mm
Balancing: -
Weight: 31g.
Closure: Frame Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Darriel Caston

Intended use: Sport / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: stainless steel CPM-S30V
Blade treatment: Teflon
Handle: Carbon Fibre
Blade length: 31mm.
Blade thickness: 3mm.
Closed Length: 50mm.
Total length: 81mm.
Thick when closed: 4mm
Balancing: -
Weight: 26g.
Closure: Slip Joint
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Serge Panchenko

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Intended Use: Collection

Type of production: Industrial
Blade: Damascus steel laminate DPS15 with sharp VG-10 58HRC
Treatment Lama: -
Production Lama: Japan
Handle: Titanium brushed
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Balancing: -
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Note: the blade is made in a special steel with 31 layers produced by Takefu Special Steel Company Ltd.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel CPM-S30V Steel Powder
Treatment Lama: -
Handle: Brass and Carbon Fiber
Blade length: 94mm.
Blade thickness: 2.5mm.
Closed Length: 120mm.
Overall length: 215mm.
Thick when closed: -
Balancing: -
Weight: 130g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: Design by Ed Schempp

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel CPM-S30V
Treatment Lama: carbonitriding black
Handle: Titanium Anodized
Blade length: 31mm.
Blade thickness: 3mm.
Closed Length: 50mm.
Total length: 81mm.
Thick when closed: 4mm
Balancing: -
Weight: 25g.
Closure: Slip Joint
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Serge Panchenko

Spyderco - Matriarch 2 - C12SBK2 - knife

Intended Use: EDC / Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN Black
Blade length: 90mm.
Blade thickness: 2mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 98g.
Closure: Back Lock
Clips: stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel ZDP-189 67HRC
Blade treatment: -
Handle: FRN British Racing Green
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thick when closed: 8mm.
Balancing: -
Weight: 20g.
Locking system: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Titanium Anodized
Blade length: 31mm.
Blade thickness: 3mm.
Closed Length: 50mm.
Total length: 81mm.
Thick when closed: 4mm
Balancing: -
Weight: 25g.
Closure: Slip Joint
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Serge Panchenko

intended use: Rescue / Emergency

Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN orange
Blade length: 94mm.
Blade thickness: 3mm.
Closed Length: 124mm.
Overall length: 213mm.
Thick when closed: -
Balancing: -
Weight: 115g.
Closure: back lock
Clip: reversible and removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: emergency whistle - retractable glass breaker

PRODOTTI PER BIRRA E COCKTAIL

In un pomeriggio caldo, niente è meglio di un drink dissetante.

Tieni il tuo bicchiere Freeze in congelatore e, quando vorrai qualcosa di fresco, lui sarà pronto!

Grazie al suo gel refrigerante brevettato e l’impugnatura in silicone puoi goderti il tuo ristoro nella canicola estiva.

Scegli tra i bicchieri da 25cl per bibite, macedonia o gelato che mantengono una temperatura tra i 6°C e gli 11°C (tra i 14°C e i 16°C se li tieni in frigo, anziché in congelatore) e il bicchiere da 47cl, per bibite o birra, che mantiene i drink tra i 3°C e i 5°C (tra i 10°C e i 12°C in frigo).

L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile; il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino.

Hai voglia di una birra o una bibita fresca, il Freeze da pinta è la soluzione per te. Se lo tieni in congelatore, mantiene il tuo drink tra i 3°C e i 5°C; in frigo, tra i 10°C e i 12°C

In aiuto di chi non si fosse ancora ben organizzato arriva un'azienda di Seattle: il team di Host Freeze Cooling ha infatti creato questi ingegnosi bicchieri da birra che raffreddano automaticamente anche il liquido più caldo. Il vetro è circondato da un gel che si raffredda se i bicchieri vengono riposti in frigorifero. In questo modo si assicura alla birra o al succo di frutta o alla bibita la giusta temperatura per una perfetta degustazione, soprattutto nelle stagioni più calde. Un'idea originale che può rivelarsi molto preziosa in caso di feste dell'ultimo momento, o per eterni sbadati che dimenticano di mettere al fresco per tempo le bottiglie di vino più pregiato.

Capacità 16oz. 2 BICCHIERI

Use: Tactical / EDC

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CTS-XHP
Treatment Blade: -
Handle: Carbon Fiber Laminate + G10 and Titanium
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 116mm.
Overall length: 195mm.
Thickness when folded: -
Balancing: -
Weight: 119g.
Lock: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Eric Glesser - Opening patented by Carson Flipper - Pivot on ball bearings - Pivot sur roulements à billes

Use: Tactical / EDC

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu

Intended use: Tactical

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson

PRODOTTI PER VINO HOST L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile;

il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino. Ogni bicchiere di vino ha una sua storia da raccontare, un sorriso da ricordare e un gusto suo e solo suo.

Host vuole accompagnare tutti questi momenti ed essere complice di chi vuole gustare il vino in tutta la sua essenza.

Il marchio Host è di proprietà dell’azienda statunitense True Fabrications, fondata a Seattle nel 2003 da un terzetto di compagni di college amanti del vino e maniaci del design. Oggi l’azienda è uno dei leader mondiali nella distribuzione di prodotti innovativi per il vino e punto di riferimento per migliaia di operatori del settore.

BPA-FREE

Tutti i prodotti Host NON contengono BPA, il Bisfenolo A, dannoso per la salute e presente nella maggior parte dei prodotti in plastica.
TWIST

Host Twist è l’unico aeratore regolabile che ti permette di scegliere la quantità di ossigeno più adatta alla tua bottiglia.

Puoi aerare istantaneamente il tuo vino e decidere che ossigenazione applicare: da 1 a 6 ore! Host ha effettuato studi scientifici per definire la quantità di ossigeno che si unisce al vino nei decanter tradizionali e l’ha confrontata con quella che il Twist ottiene in pochi secondi in maniera assolutamente naturale.

COME USARE IL TWIST

Muovi in senso anti-orario la parte superiore del Twist e regola la quantità di ossigeno che esalta meglio il tuo vino. Il numero 1 corrisponde ad 1 ora di aerazione, il numero 2 a 2 ore e così via, fino a sei ore, in pochi istanti! Tieni il Twist sopra il bicchiere che vuoi riempire, versaci dentro il vino e goditelo con chi vuoi. OSSIGENA NEL MODO GIUSTO La corretta aerazione del vino ammorbidisce i tannini e permette l’esaltazione degli aromi. Ogni vino ha bisogno della corretta quantità di ossigeno per poter esprimere al meglio il suo potenziale. In generale, vale la regola per cui un vino da invecchiamento ancora giovane ha bisogno di un’ossigenazione maggiore per poter sprigionare al meglio tutti gli aromi; un vino già invecchiato, invece, deve essere ossigenato più delicatamente affinché conservi le note fruttate residue e il vigore che ha resistito al processo di invecchiamento.

Intended Use: Sport / Outdoor

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: Black G-10
Blade length: 86mm.
Blade thickness: 3mm.
Closed Length: 106mm.
Overall length: 192mm.
Thick when closed: -
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Multiposition and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Bob Terzuola

Intended use: sailboat

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless nitrogen LC200N
Treatment Blade: -
Handle: Titanium
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 106mm.
Overall length: 166mm.
Thick when closed: -
Balancing: -
Weight: 119g.
Lock: Frame Lock the blade and Ceramic Ball Lock on scioglinodi
Clip: Multiposition and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: With schackle key and marlin spike

Destinazione d'uso: Collezione

Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 145g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended Use: Sport / EDC

Blade: 66/67HRC ZDP-189 stainless steel
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade Thickness: 2.5mm.
Closed Length: 84mm.
Total length: 141mm.
Balance: -
Weight: 34g.
Closure: Back Lock
Clips: stainless
Sheath: -
Notes: -