Last up date

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory



Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Intended Use: Sporting / EDC / Collection

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.

Knife withdrawn from private collection - Model produced from 2012 to 2016 now no longer available - Specimen in like new condition, supplied with original box - Some small signs of wear on the rear handle, at the height of where the clip rests against the titanium - Checked and certified by our in-house laboratory




Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Stone Washed
Handle: Titanium
Blade length: 65mm.
Blade thickness: 4.5mm.
Length closed: 87mm.
Total length: 152mm.
Thickness when closed: -
Weight: 102g.
Closure: Frame Lock
Clip: Stainless Steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz - Knife withdrawn from private collection in like-new condition

Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.

Intended Use: Sporting / EDC

Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good condition

Othello Solingen Germany by Anton Wingen JR - famous brand in the 80s and 90s

Intended Use: Hunting

Type of production: handcrafted
Blade: 440 steel
Country of manufacture: Germany
Handle: deer
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 235mm.
Weight: 210g.
Sheath: Leather
Notes: 1980s vintage knife discontinued 

Host - Wine Freeze - set of 4 universal glasses - REFRIGERATORS

HOST WINE PRODUCTS

The love for innovative design applied to the world of wine is the polar star of Host. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready.

Just pour and enjoy the well-deserved refreshment! The Freeze wine glass is ideal for enjoying both red and white wine: kept in the freezer for at least two hours, it keeps the wine at a temperature of between 6°C and 11°C;

If you keep it in the fridge, it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel which cools down when the glasses are placed back in the refrigerator. This ensures that the wine is at the right temperature for perfect tasting, especially in the warmer seasons.

An original idea that can be very useful for last-minute dinners, or for the ever-inconsiderate who forget to refrigerate bottles of fine wine in time.

Pack of 4 glasses in 4 different colours, capacity 250ml.

Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

Intended use: Sports

Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpening

Knife collected from private collection - Absolutely like new, old production CPM-S30V steel - Never used - Original sharpening - Original box, slightly marked, with certificates - Knife checked and certified by our internal laboratory

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: like new knife, taken from a private collection

Knife collected from private collection - Limited edition "Sprint Run" model remained in production only in 2010 - Like-new condition, comes with original box, manuals, factory sharpening, never carried in pocket or used - Checked and certified by our in-house lab.

Intended use: sporting / collection

Production type: industrial
Country of manufacture: Seki - Japan
Blade: Stainless steel ZDP-189
Blade finish: Satin finish
Handle: Carbon fiber with stainless steel liners
Blade length: 70mm.
Blade thickness: 2.5mm.
Length closed: 93mm.
Total length: 157mm.
Weight: 55g.
Closure: LinerLock
Clip: Stainless steel, removable
Notes: Design by Michael Walker - Sprint Run Edition released only in 2010 - Collected from private collection, exactly like new, with box and manuals

Designer Notes

Michael Walker is to the knife industry what Michael Jordan is to basketball or Wayne Gretsky is to field hockey. He shattered established standards, jumping into uncharted territory and elevating the art of cutlery to greater heights of innovation and modernity.

In 1980, the folding knife industry had few locking innovations and only the traditional Back Lock existed. In 1981 Walker invented, developed and eventually trademarked the Michael Walker LinerLock® adding a leaf spring that locked the blade open, making it a true one-handed openable folding knife. He also included a latch to hold the blade closed using the force of the inner folder spring so it wouldn't open in a pocket to the user.

This innovation of his opened the door to modern cutlery, allowing for multiple new designs and future developments up to today's SubFrame Lock, Frame Lock, Flipper Folder and IKBS ball bearing opening systems.

Other inventions include the "Lake and Walker Safety System" or LAWKS, BLADELock, Ball bearing lock, and Tough Lock.

Some of the manufacturing companies he has worked with include Spyderco, Columbia River Knife and Tool, Schrade, Böker, and Klotzli.

Walker's knives and designs have inspired many other custom knife makers, most notably Bob Terzuola and Ernest Emerson. Terzuola credits Walker with teaching him how to make a linerlock folder and Emerson said that seeing a Walker knife at a gun show gave him the inspiration to become a knifemaker.

Walker's knives can be found at the Artifex Gallery in Taos and in most prestigious collections around the world.

Intended Use: Collection / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210 

SCANPAN Maitre D' is an elegant series of miniature copper saucepans that combines modern design with classic French elegance.

Copper provides a quick and even heat distribution, and the series is manufactured with an internal stainless steel for optimum cleaning.

SCANPAN Maitre D 'pots have stainless steel handles that are attached with rivets and therefore remain cold longer.

The small portion pots are useful for delicate dishes, sauces, melted butter or chocolate to name a few - or use it directly on the table for serving meals.

Timeless and stylish design

For cooking, baking and serving

Efficient multi-layer construction

Aluminium core for excellent heat distribution 18/10 stainless steel inside for maximum durability

The copper exterior and steel handle give an exclusive look

ScanPan - Mini Paella Pan - Maitre D' 16cm

The copper miniature paella pan features a polished copper exterior and 18/10 stainless-steel interior for rapid, uniform heating.

Can be used to cook on your hob or oven and looks cool placed direct on the table.

Let your dinner imagination run wild.

Size :16cm

Height :5.3 cm

Base diameter :10.4 cm

Weight: 0.44 kg

Ovenproof up to : 260°C.

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: Usa
Blade: Stainless steel CPM-SPY27
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush stainless steel clip
Package: cardboard box with Spyderco logos
Notes: Special edition stainless steel CPM-SPY27, developed by Spyderco together with Crucible and used exclusively on Spyderco products - Spyderco's main aim was to improve the VG-10 steel by increasing its composition and enriching it with nitrogen, niobium, vanadium and additional carbon by using a powder steel instead of a traditional martensitic one.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Satin finish
Handle: G10 with embedded stainless steel liners
Blade length: 101mm.
Blade thickness: 3.7mm.
Length closed: 136mm.
Total length: 236mm.
Thickness when closed: 11mm.
Weight: 150g.
Closure: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Package: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Kelly McCann is one of the world's foremost experts on counter-terrorism, counter-terrorism, close combat and all aspects of security. His decades of real-world operational experience are clearly reflected in the Canis, a no-frills folding knife optimized for personal protection.

Its extraordinary CPM® S30V® stainless steel blade combines a Wharncliffe style design with a reinforced tip and a central blade wedge to reduce weight and maximize cutting power.
The ergonomic handle features carbon fiber and G-10 scales with layered weft, drowned stainless steel liners, high-strength compression closure and a versatile four-position clip that supports all possible transport options.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon Fiber and G10 with liners embedded in stainless steel
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 206mm.
Thick when closed: 11mm.
Weight: 116g.
Closing: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Kelly McCann

Intended use: Sports

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closing: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Note: -

Made of ceramic material, this medium-grained Spyderco bench stone is perfect for recovering the thread of cutting tools such as kitchen knives, collection, chisels, which have lost their cutting edge.

Production: U.S.A.
Dimensions: 200x50x10 mm.

It is used dry, without water or oil.

Made of ceramic material, this Spyderco bench stone with ultra fine grain is perfect for finishing and final polishing the wire of a cutting tool.
Production: U.S.A.
Dimensions: 200x50x10 mm.

It is used dry, without water or oil.

Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.

Intended use: Tactical / Allround

Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Black
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | Smashing

Intended use: sub / immersion / sports

Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosion

Intended use: sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel CTS-XHP
Blade treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3.5mm.
Closed length: 88mm.
Total length: 152mm.
Thick when closed: -
Weight: 99g.
Closure: R.I.L. Reeve Integral Lock (Frame Lock)
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

The Stunning Copper and Stainless Steel Collection SCANPAN's Maitre D' series is a beautiful assortment of copper and stainless steel that combines French elegance with timeless design.

The multi-layer construction of Maitre D' guarantees a quick and even heat distribution, and excellent temperature control - whether sautéing vegetables, melting chocolate or making sauces.

Dimension: Top

Diameter: 14cm

Base Diameter: 11.8cm

Capacity 900ml

Outside mirror polished high quality copper Inside mirror polished 18/10 stainless steel for maximum durability

Rapid heat distribution

Cast stainless steel handles - stays cool longer.

Destination of use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Satin
Handle: Carbon Fiber
Blade length: 82mm.
Blade thickness: 3mm.
Length closed: 106mm.
Total length: 184mm.
Weight: 82g.
Locking system: Compression Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: opening by Carson Flipper system on ball bearings

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S110V Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: sprint run edition

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-BD1 stainless steel
Blade treatment: Satin
Handle: FRN Fiberglass Reinforced Nylon with stainless steel liner
Blade length: 33mm.
Blade thickness: 3mm.
Length closed: 57mm.
Total length: 90mm.
Thick when closed: 6.8mm
Weight: 34g.
Closure: Liner Lock
Clip: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Darriel Caston

Purpose: Sports

Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade Treatment: Satin
Handle: Stainless Steel and G-10
Blade Length: 70mm.
Blade thickness: 3mm.
Closed length: 98mm.
Total Length: 167mm.
Closed thickness: 14mm.
Weight: 96g.
Closure: Ball Bearing Lock
Clip: Removable and reversible, stainless steel
Packing: cardboard box with Spyderco logos
Notes: Design by Eric Glesser - Reshapes the iconic and ergonomic lines of DODO and SCORPIUS models

Logan is not a common liner, but hides an epic revolution in the constructive concept!

Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

Purpose: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno Franzin

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint run

Purpose: Sportsman / Collectibles

Type of production: industrial
Blade: Clad - Centrally-laminated steel in Aogami SuperBlue Steel at 65 / 66HRC and outer cheeks in stainless steel 420J1
Blade treatment: satin finish
Country of production: Japan
Handle: Gray FRN with drowned stainless steel liners
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Closed thickness: 15.5mm.
Weight: 94g.
Closing: Back Lock
Clip: removable, multiposition, stainless steel
Packing: Cardboard box with Spyderco logos
Notes: Sprint Run Limited Edition, made in only 1200 specimens featuring a carbon steel centered steel core and stainless steel cheeks

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: CTS-BD1 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 84mm.
Blade thickness: 3.2mm.
Closed Length: 115mm.
Overall length: 198mm.
Thick when closed: 16mm.
Weight: 111g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Satin finish
Handle: Titanium
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 122g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon fiber and laminate titanium liners with G10 and G10 in orange spacer
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 188mm.
Thick when closed: 13mm.
Weight: 116g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Peter Carey - opening via Carson Flipper system on ball bearings

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: Teflon
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Balance: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended use: Utility / Hunting

Type of production: Industrial
Country of production: Seki - Japan
Blade: Stainless Steel VG-10
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 72mm.
Blade thickness: 2.5mm.
Closed Length: 106mm.
Overall length: 175mm.
Thick when closed: 10mm.
Weight: 102g.
Closure: Front Lock
Clip: reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Paul Alexander

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: U.S.A.
Blade: stainless steel CPM S110V
Handle: G10
Blade length: 102mm.
Blade thickness: 3.7mm.
Length closed 140mm.
Overall length: 242mm.
Thick when closed: 15mm.
Weight: 122g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos

Intended use: Sports

Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Ciondolo ferma filo realizzato in pesante peltro lavorato a fusione

Dimensioni: 1.5x1.3x1.3cm

Originale Spyderco - Made in USA

Intended use: EDC / Neck Knife

Type of production: Industrial
Production Country: Japan
Blade: Stainless Steel H1
Blade treatment: Satin finish
Handle: FRN
Blade length: 65mm.
Blade thickness: 2 mm.
Overall length: 126mm.
Weight: 26g.
Sheath: Boltaron (plastic) with steel chain to wear around my neck
Packaging: cardboard box with Spyderco logos
Notes: Design by John Shirley and Sam Owens

Intended use: Tactical / Martial

Type of production: Industrial
Production Country: Taiwan
Blade: Full tang, stainless steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Overall length: 197mm.
Weight: 102g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Packaging: cardboard box with Spyderco logos
Notes: Design by Craig Douglas, aka "Southnarc"

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420 satinato
Paese di produzione: Italia - Maniago
Manicatura: ABS
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 50g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: -

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

Intended Use: Training

Type of production: Industrial
Production Country: Japan
Blade: Stainless steel AUS-6
Blade treatment: Satin finish
Handle: FRN
Blade length: 109mm.
Blade thickness: 4mm.
Overall length: 241mm.
Weight: 146g.
Sheath: Boltaron (plastic) with Tek-Lok coupling
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal Glesser - Exemplary discontinued and no longer available, one piece at our disposal

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: Full Tang, Stainless Steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 104mm.
Blade thickness: 3mm.
Overall length: 199mm.
Weight: 111g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Tactical / EDC

Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 79mm.
Blade thickness: 4mm.
Closed Length: 114mm.
Overall length: 192mm.
Thick when closed: 11mm.
Weight: 113g.
Closure: Front Lock
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with stainless steel liners drowned
Blade length: 77mm.
Blade thickness: 3mm.
Closed Length: 101mm.
Overall length: 178mm.
Thick when closed: 13mm.
Weight: 74g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Brad Southard - Opening on ball bearings - opening via Carson Flipper system

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Titanium and Carbon Fiber with marble effect
Blade length: 94mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 218mm.
Thick when closed: 12mm.
Weight: 145g.
Closing: Framelock
Clips: stainless steel, removable
Packaging: cardboard box with Spyderco logos
Notes: Design by Filip De Leeuw

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Sport / Collection

Type of production: Industrial
Production blade: Use
Blade: Stainless steel CPM-S30V Steel Powder
Blade treatment: Black TiNi
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Length closed: 121mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 108g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: discontinued product and hard to find, very rare that you can find the version with black blade plain edge

Intended use: Sport / Collection

Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade treatment: beaded blast
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 119mm.
Overall length: 197mm.
Weight: 133g.
Locking system: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Serge Panchenko

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -