Last up date
-
Randall Knives - Model 25-5 - Trapper 5” in Brass, Desert Ironwood and Leather - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratoryDrop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.
Intended use: hunting / light utility
Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warrantyAP-RK-25-5DI-CP€1,139.34Only 1 leftOnly 1 left
-
Randall Knives - Model 26 Pathfinder Knife - Stag - PRIVATE COLLECTION - knife
The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratoryIntended use: utility
Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 150mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -AP-RAND-26€613.93Only 1 leftOnly 1 left -
Randall Knives - Model 16 Diver Knife - Micarta - PRIVATE COLLECTION - knife
The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.
7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy.
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratoryIntended use: utility
Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -AP-RAND-16€1,057.37Only 1 leftOnly 1 left -
Randall Knives - Model 27 - Trailblazer Leather and Walnut - PRIVATE COLLECTION - knife
The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-27€897.54Only 1 leftOnly 1 left -
Randall Knives - Model 11-4.5 - Alaskan Hunter brass and walnut - PRIVATE COLLECTION - knife
Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: huntingType of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-1145€750.00Only 1 leftOnly 1 left -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP€12.30Only 8 leftOnly 8 left
-
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY€20.49Only 1 leftOnly 1 leftOut of stock -
Randall Knives - Model 25-5 - Trapper 5” brass, deer and leather - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: -
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: -
Inspected and certified by our internal laboratoryDrop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Deer wood and leather rings, and oiled leather sheath.
Intended use: hunting / light utility
Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: deer horn and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 275g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like newAP-RK-25-5CE-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 7 - Fisherman Hunter Deer - PRIVATE COLLECTION - knife
This is a smaller version of Bo Randall's original knife, made in the Scagel knife style. 12.2 cm blade made of 4.5 mm thick stainless steel. This size and shape are popular with outdoor activity experts worldwide. It has a nickel silver guard and back cap and a handle made of authentic Indian deer antler. It weighs about 168 grams and comes with a brown leather sheath.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: hunting/fishingType of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deerskin with through-guard and nickel silver tang
Blade length: 122mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Balance: backward
Weight: 168g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-7FHC€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 11-5 - Alaskan Skinner - PRIVATE COLLECTION - knife
Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: A few small marks given by being placed in the sheath.
* Marks on handle: A few small marks on the duralumin pommel.
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended use: huntingType of production: handcrafted
Country of manufacture: USA
Blade: carbon steel O-1
Blade finish: satin finish
Handle: leather rings with brass through-guard and duralumin tang
Blade length: 118mm.
Blade thickness: 4.5mm.
Total length: 230mm.
Balance: backward
Weight: 210g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-115L€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Model 19-4 - Bushmate Stag Horn - PRIVATE COLLECTION - knife
This Model 19-4 Bushmaster from Randall Made Knives features a clip point blade with satin finish, false counterbore and serrated thumb rest. The handle consists of nickel silver through-guard and recoil pad with colored micarta spacers and monolithic curved deer antler grip. Includes original "Model A" leather sheath with belt loop and sharpening stone.
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryIntended use: hunting
Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: deer antler with through-guard and nickel silver recoil pad
Blade length: 115mm.
Blade thickness: 5.5mm.
Total length: 228mm.
Balance: set back
Weight: 281g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collectionAP-RK-194SH€0.00Only 0 leftOnly 0 leftOut of stock -
Randall Knives - Modelo 1-7" - Micarta Finger Grooves - COLECCION PRIVADA - cuchillo de coleccionista
CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio internoEl Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.
Uso previsto: táctico / militar
Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privadaAP-RK-1-7MFG€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBC-0618€237.70Only 0 leftOnly 0 left
Out of stock -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL€49.18Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Safe Folder Frame Lock - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: Titanium Darkwashed
Blade Length: 100mm.
Blade thickness: 3mm.
Closed length: 125mm.
Overall length: 218mm.
Closed thickness: 14mm.
Weight: 160g.
Opening: carson pinball system
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Rear fender - Produced by Lion SteelBA-SAFE€343.44Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - RED Dark Stone Washed - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: G10 and Titanium Darkwashed
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Closed thickness: 13mm.
Weight: 117g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Glass Breaker - Produced by Lion SteelBA-REDB€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - BBR2 IKBS Frame Lock - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and anodized titanium
Blade Length: 85mm.
Blade thickness: 3.5mm.
Closed length: 115mm.
Total length: 195mm.
Closed thickness: 14mm.
Weight: 99g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BBR2€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Big Dragotac OD Green - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and Titanium
Blade Length: 120mm.
Blade thickness: 5mm.
Closed length: 160mm.
Total Length: 270mm.
Closed thickness: 14mm.
Weight: 236g.
Opening: removable thumbnail, ambidextrous
Washers: Teflon
Closure: Framelock with additional Rotoblock security system
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BDRG€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Picolomako - Karambit - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 76mm.
Blade thickness: 3mm.
Closed length: -
Overall length: 187mm.
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-05€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBA-MAKF€204.10Out of stock -
Bastinelli Knives - Kalinou Karambit - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Kalinou Karambit Black - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: PVD
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01PVD€245.08Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW€0.00Only 0 leftOnly 0 leftOut of stock -
Bastinelli Knives - Diagnostic Black - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04PVD€118.85Only 0 leftOnly 0 leftOut of stock -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN€54.92Out of stock -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK€54.92Out of stock -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2€51.64Out of stock -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK€65.57Out of stock -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB€59.84Out of stock -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB€98.36Out of stock -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB€17.21Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB€54.92Only 0 leftOnly 0 leftOut of stock -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB€63.93Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB€54.10Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB€34.43Only 0 leftOnly 0 leftOut of stock
