Last up date

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Elegant, stable wooden block, perfect for the worktop, with 5 high-quality knives:

Paring knife 9 cm: for peeling and cutting vegetables and fruit

Serrated paring knife 12 cm: for cutting tomatoes, peppers and kiwis 

All-purpose knife 15 cm: for different cuts of small foodstuffs 

Carving knife 20 cm: the most versatile knife in the kitchen for slicing, carving and chopping 

Bread knife 20 cm: thanks to its serrated blade, it allows you to cut bread, flour and pastries.

The knife block also includes a detachable 20.5 cm kitchen scissors.

In the wooden block there is a handy knife sharpener, always available to sharpen the edge of the blade of your knives, which will then always be ready to slice everything. The knife sharpener is not suitable for the bread knife with serrated blade.

The AITOR Pocket Knife 284.172 Gran Ranchero is a vintage multipurpose knife, renowned for its quality and versatility. Made in Spain between the 80s and 90s, this knife is ideal for camping, hiking and other outdoor activities thanks to its numerous integrated tools.

Main features
Model: 284.172 Gran Ranchero
Manufacturer: AITOR
Origin: Spain
Blade Material: High quality stainless steel
Handle: Durable synthetic material with non-slip finish
Total Length: About 20cm (open)
Closed length: Approx. 11cm
Weight: Lightweight and easy to carry
Multipurpose Tools
Main blade: For cutting and peeling
Corkscrew: For opening bottles of wine
Can opener: For opening cans
Bottle opener: For opening bottles with crown caps
Spoon: Useful for outdoor meals
Fork: To complete the camping cutlery set
Functionality
Compact Design: Easy to carry, fits conveniently in your pocket or backpack
Safe locking system: Ensures that the blades remain in position whether open or closed, reducing the risk of accidents
Ergonomic handle: Offers a secure and comfortable grip
Uses
Outdoor activities: Camping, hiking, fishing
Daily Use: Perfect for small craft jobs and as an emergency tool
Collectibles: A quality piece for vintage knife collectors
Final Considerations

The AITOR Pocket Knife 284.172 Gran Ranchero represents an excellent example of Spanish craftsmanship in the knife industry. With its combination of functionality and durability, it is an excellent choice for anyone who appreciates high-quality tools.

Intended use: Collection / Outdoor

Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:

* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers

Packaging: cardboard with Aitor logos

SCANPAN Maitre D' is an elegant series of miniature copper saucepans that combines modern design with classic French elegance.

Copper provides a quick and even heat distribution, and the series is manufactured with an internal stainless steel for optimum cleaning.

SCANPAN Maitre D 'pots have stainless steel handles that are attached with rivets and therefore remain cold longer.

The small portion pots are useful for delicate dishes, sauces, melted butter or chocolate to name a few - or use it directly on the table for serving meals.

Timeless and stylish design

For cooking, baking and serving

Efficient multi-layer construction

Aluminium core for excellent heat distribution 18/10 stainless steel inside for maximum durability

The copper exterior and steel handle give an exclusive look

ScanPan - Mini Paella Pan - Maitre D' 16cm

The copper miniature paella pan features a polished copper exterior and 18/10 stainless-steel interior for rapid, uniform heating.

Can be used to cook on your hob or oven and looks cool placed direct on the table.

Let your dinner imagination run wild.

Size :16cm

Height :5.3 cm

Base diameter :10.4 cm

Weight: 0.44 kg

Ovenproof up to : 260°C.

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Vintage folding knife made by the well-known Spanish house Aitor

Intended use: Sports

Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood with Cocker engraving
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 163mm.
Balancing:
Weight: 83g.
Blade lock: back lock

Vintage folding knife made by the famous Spanish house Aitor

Intended use: Sports

Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 200mm.
balancing:
Weight: 130g.
Sheath: -

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 60-61HRC D2 Tool Steel
Blade treatment: Black Idroglider
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Design by Sandro Martinelli and Marco Bellani

The Stunning Copper and Stainless Steel Collection SCANPAN's Maitre D' series is a beautiful assortment of copper and stainless steel that combines French elegance with timeless design.

The multi-layer construction of Maitre D' guarantees a quick and even heat distribution, and excellent temperature control - whether sautéing vegetables, melting chocolate or making sauces.

Dimension: Top

Diameter: 14cm

Base Diameter: 11.8cm

Capacity 900ml

Outside mirror polished high quality copper Inside mirror polished 18/10 stainless steel for maximum durability

Rapid heat distribution

Cast stainless steel handles - stays cool longer.

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: outdoor / survival

Type of production: industrial
Blade: 420 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 240mm.
Blade thickness: 4.7mm.
Total length: 375mm.
Weight: 460g. (626g. With scabbard)
sheath: in leather
Note:

*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***

Intended Use: Training

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Aitor - Desollador 347 180 - knife

Vintage folding knife made by famous Spanish house Aitor

Intended use: Sport

Type of production: semi-homemade
Blade: Stainless steel 440
Treatment Blade: -
Production Lama: Spanish
Handle material: brass and wood
Blade length: 70mm.
Blade Thickness: 4mm.
Overall length: 200mm.
balancing:
Weight: 136g.
Sheath: -

Coltello chiudibile vintage realizzato dalla nota casa spagnola Aitor

Destinazione d'uso: Sportivo

Tipo di produzione: semi-artigianale
Lama: in acciaio inox 440
Trattamento Lama: -
Produzione Lama: spagnola
Manicatura: ottone e legno
Lunghezza lama: 150mm.
Spessore della lama: 4mm.
Lunghezza totale: 345mm.
Bilanciatura: 
Peso: 628g.
Fodero: -

Country of manufacture: Italy
Blade: Stainless steel W 1.4116 55/56HRC
Blade finish: Idroglider Gold Black
Handle: PP with TPE overmolded
Blade length: 105mm.
Blade thickness: 3.8mm.
Total length: 210mm.
Weight: 140g.
Sheath: ABS with rubber ties for calf or forearm attachment

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Mac Knives - Sub Tekno Titanium - knife

Intended use: Underwater

Type of production: Industrial
Production Blade: Italy
Blade: Titanium beta
Treatment Lama: -
Handle material: PP TPE overmolded
Blade length: 108mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balance: -
Weight: 98g.
Closing: -
Clip: -
Sheath: ABS with rubber straps for fastening the calf
Packaging: Cardboard box with logos MAC
Notes:

Intended use: Military / Tactical / Collection

Type of production: industrial
Blade: 59-60HRC RWL 34
Blade treatment: blackwash
Country of production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 286g.
sheath: in cordura with springs
Notes: Limited Edition 2019 numbered on the blade - Design by Sandro Martinelli and Marco Bellani

Intended use: training knife with rounded edge and tip

Type of production: industrial
Blade: 440 steel
Blade treatment: stonewash
Lama production: Italy
Handle: polymers
Blade length: 135mm.
Blade thickness: 5.8mm.
Total length: 265mm.
Balancing: on the guard branch
Weight: 314g.
sheath: in cordura
Notes: Design by Sandro Martinelli and Marco Bellani

The simplicity of DROP STOP solves one of the most annoying inconveniences of pouring wine.
By rolling up the diskette and inserting it into the neck of the bottle, the thin wire of DROP STOP will perfectly cut the drop, so it won't soil the tablecloth.
Effective and 100 percent reusable Drop Stop is made of aluminum coated with food-grade PVC and therefore does not alter the taste of the wine.
Now the new drop stop also becomes an aerator,the wine can also breathe, in fact it oxygenates the wine releasing the aromas and enhancing the taste and allows it to be served without spilling drops.
The package includes 2 drop stops.