Last up date

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The Hobbit - Thorin Oakenshield key and map of Erebor NN1212 - The Hobbit

- Officially Licensed from the film trilogy The Hobbit
- Map of Thorin Oakenshield with wooden display including key Thorin
- Pack size: 11 x 39 x 43 cm
- Weight: 2.28 Kg

The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product

The Hobbit - Playing in a 1: 3 of the sword of Thorin from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.

Officially licensed product accompanied by "The Hobbit" for New Line Cinema

The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product

The Hobbit - Playing in a 1: 3 Sword of Thranduil from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 21 cm.

Officially licensed product accompanied by "The Hobbit" for New Line Cinema

The Hobbit - Miniature dagger Tauriel - open letters - NN1213 - official product

Lord of the Rings - Playing in a 1: 3 of the dagger of Tauriel from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.

Officially licensed product accompanied by "Lord of the Rings" in New Line Cinema

The Hobbit - Dwarven Treasure Coin Set - coins dwarven NN6087 - The Hobbit

Erebor is a dwarven city of enormous size, located in the mountains east of Mirkwood, which sees inside tall chambers filled with gold. The city was governed by an endless line of kings, including Thrain and Thorin, and for some years it was occupied by the ruthless dragon Smaug. It was also the capital of the United flourishing under the Mountain.

container wood
- Measures 26.5 x 8.5 x 2.2 cm

metal coins
- 5 dwarven coins of different sizes

Officially Licensed!

PRODOTTI PER BIRRA E COCKTAIL

In un pomeriggio caldo, niente è meglio di un drink dissetante.

Tieni il tuo bicchiere Freeze in congelatore e, quando vorrai qualcosa di fresco, lui sarà pronto!

Grazie al suo gel refrigerante brevettato e l’impugnatura in silicone puoi goderti il tuo ristoro nella canicola estiva.

Scegli tra i bicchieri da 25cl per bibite, macedonia o gelato che mantengono una temperatura tra i 6°C e gli 11°C (tra i 14°C e i 16°C se li tieni in frigo, anziché in congelatore) e il bicchiere da 47cl, per bibite o birra, che mantiene i drink tra i 3°C e i 5°C (tra i 10°C e i 12°C in frigo).

L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile; il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino.

Hai voglia di una birra o una bibita fresca, il Freeze da pinta è la soluzione per te. Se lo tieni in congelatore, mantiene il tuo drink tra i 3°C e i 5°C; in frigo, tra i 10°C e i 12°C

In aiuto di chi non si fosse ancora ben organizzato arriva un'azienda di Seattle: il team di Host Freeze Cooling ha infatti creato questi ingegnosi bicchieri da birra che raffreddano automaticamente anche il liquido più caldo. Il vetro è circondato da un gel che si raffredda se i bicchieri vengono riposti in frigorifero. In questo modo si assicura alla birra o al succo di frutta o alla bibita la giusta temperatura per una perfetta degustazione, soprattutto nelle stagioni più calde. Un'idea originale che può rivelarsi molto preziosa in caso di feste dell'ultimo momento, o per eterni sbadati che dimenticano di mettere al fresco per tempo le bottiglie di vino più pregiato.

Capacità 16oz. 2 BICCHIERI

Intended use: Tactical

Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson

PRODOTTI PER VINO HOST L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile;

il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino. Ogni bicchiere di vino ha una sua storia da raccontare, un sorriso da ricordare e un gusto suo e solo suo.

Host vuole accompagnare tutti questi momenti ed essere complice di chi vuole gustare il vino in tutta la sua essenza.

Il marchio Host è di proprietà dell’azienda statunitense True Fabrications, fondata a Seattle nel 2003 da un terzetto di compagni di college amanti del vino e maniaci del design. Oggi l’azienda è uno dei leader mondiali nella distribuzione di prodotti innovativi per il vino e punto di riferimento per migliaia di operatori del settore.

BPA-FREE

Tutti i prodotti Host NON contengono BPA, il Bisfenolo A, dannoso per la salute e presente nella maggior parte dei prodotti in plastica.
TWIST

Host Twist è l’unico aeratore regolabile che ti permette di scegliere la quantità di ossigeno più adatta alla tua bottiglia.

Puoi aerare istantaneamente il tuo vino e decidere che ossigenazione applicare: da 1 a 6 ore! Host ha effettuato studi scientifici per definire la quantità di ossigeno che si unisce al vino nei decanter tradizionali e l’ha confrontata con quella che il Twist ottiene in pochi secondi in maniera assolutamente naturale.

COME USARE IL TWIST

Muovi in senso anti-orario la parte superiore del Twist e regola la quantità di ossigeno che esalta meglio il tuo vino. Il numero 1 corrisponde ad 1 ora di aerazione, il numero 2 a 2 ore e così via, fino a sei ore, in pochi istanti! Tieni il Twist sopra il bicchiere che vuoi riempire, versaci dentro il vino e goditelo con chi vuoi. OSSIGENA NEL MODO GIUSTO La corretta aerazione del vino ammorbidisce i tannini e permette l’esaltazione degli aromi. Ogni vino ha bisogno della corretta quantità di ossigeno per poter esprimere al meglio il suo potenziale. In generale, vale la regola per cui un vino da invecchiamento ancora giovane ha bisogno di un’ossigenazione maggiore per poter sprigionare al meglio tutti gli aromi; un vino già invecchiato, invece, deve essere ossigenato più delicatamente affinché conservi le note fruttate residue e il vigore che ha resistito al processo di invecchiamento.

The simplicity of DROP STOP solves one of the most annoying inconveniences of pouring wine.
By rolling up the diskette and inserting it into the neck of the bottle, the thin wire of DROP STOP will perfectly cut the drop, so it won't soil the tablecloth.
Effective and 100 percent reusable Drop Stop is made of aluminum coated with food-grade PVC and therefore does not alter the taste of the wine.
Now the new drop stop also becomes an aerator,the wine can also breathe, in fact it oxygenates the wine releasing the aromas and enhancing the taste and allows it to be served without spilling drops.
The package includes 2 drop stops.

Triangle- Angular spatula for cakes Designed to decorate with total control, it is perfectly suited to easily spread ice, cream and cream on the edges of the cake. The blade is flexible, made of stainless steel and is 15 cm long.