Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The SAN-SLICE Knife with professional wood handle is a high quality tool designed to achieve thin, even slices. 
Its 6 cm long, smooth stainless steel blade ensures a clean and precise cut, perfect for truffles, mushrooms, vegetables, parmesan and chocolate.
The design combines satin stainless steel with elegant walnut wood inserts, making it not only robust but also aesthetically pleasing. 
The thickness regulator allows to obtain slices of the same thickness, guaranteeing precision in every use.
With a total length of 20 cm and an ergonomic handle, the SAN-SLICE offers a secure and comfortable grip. 
It is recommended to wash the slicers by hand with mild detergents and dry them thoroughly to preserve their quality.

Blade length: 6cm

Total length: 20cm

The Premana Professional line presents the 12 cm skinning knife, an indispensable tool for food professionals, particularly suitable for skinning and processing raw meat.
This knife is distinguished by its rigid blade, designed to ensure precision and robustness during cutting operations, offering excellent control in all stages of processing.
The ergonomic handle is made with a double molding technology and includes a non-slip material coating, which ensures a secure and comfortable grip even in wet conditions. It is also treated with a Biomaster additive, which provides antibacterial protection for increased hygiene safety during use.

Use: Knife for skinning

Blade: 54-56 HRC surgical steel

Handle: Sterilisable corrosion resistant polymers

Blade length: 12cm

Total length: 26cm.

Weight: 118g

 Line: Premana 

Suitable for: Meat 

Premana Professional Line 

Curved carving fork 33 

Total length: 33 cm. 

Two-pronged fork with curved sheared blade. 

Country of production: Italy 

Blade: surgical stainless steel with hardness of 54-56 HRC 

Handle: in sterilisable anti-corrosion polymer, with Biomaster antibacterial additive 

Blade length: 18cm 

Total length: 33cm 

Weight: 166g 

Packaging: cardboard blade cover with Sanelli logos.

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

Drip.it+ bottle drainer

Length: 37.5cm - 56.5cm (extendable)

Width: 10.5cm

Weight: 358g

Stainless steel insert included

Material: silicone + stainless steel

Inventor: Susanne Richter (SanniShoo)

Cleaning likes to decorate... Everyday life around the sink.

drip.it offers the ideal solution for various ‘draining scenarios’. The stainless steel insert makes it the perfect mobile and easily stowable draining station for almost all types of reusable bottles. Whether glass bottles, modern thermo bottles or baby bottles.

Heat-resistant silicone rings protect the bottles from scratches. Up to three bottles can be drained at the same time with drip.it+. There is also space for bottle caps, brushes, sponges etc. on an extra shelf.

Freshly washed salad or cooked pasta can also be easily drained in the sieve (sieb.up) with the help of drip.it+. -drip.it+ is extendable and therefore fits perfectly on any sink.

This makes it ideal for use as a flexible colander holder for draining washed or cooked food over the sink. Fewer germs on the sink thanks to better drying bottles, dishcloths, sponges and brushes. A simple idea, but a real jack-of-all-trades that can do a lot.

Practical and compact, this roll has pockets designed to accommodate 3 knives or cooking utensils, ensuring efficient and safe organization.

Contents:

Serrated Paring Knife 160(Limited Edition): This semi-rigid blade knife is ideal for cutting and peeling fruits and vegetables. Featuring an ergonomic double-molded handle and non-slip material, it offers a secure and comfortable grip. The micro-serrated blade ensures ease of use and durability.

Curved Paring Knife: This rigid-bladed knife is perfect for cutting and peeling fruits and vegetables, ensuring precision and control in every movement.

Double-Bladed Peeler: This tool features a double blade, ideal for peeling potatoes and vegetables. The ergonomic handle made of double molding and non-slip material ensures a comfortable and secure grip during use.

- Designed to ensure maximum safety during use.
- High-quality materials and design ensure long-lasting performance.
- Easy to clean, helping to maintain a clean and safe working environment.
- Ergonomic handle is designed to provide maximum comfort and reduce fatigue during prolonged use.

This spatula is the ideal accessory for barbecue enthusiasts and those who love to cook on the grill.

- It features a blade of considerable width, which allows you to turn meat, fish and vegetables with ease, avoiding sticking or ruining them. This feature makes it perfect for handling even the most delicate foods.
- The special shape of the blade not only facilitates use during cooking, but also allows it to be used for cleaning the grill. It is designed to remove food residue and encrusted grease, keeping the grill clean and ready for the next use.
- The handle is double-molded, providing an ergonomic and comfortable grip. This ensures a firm and secure grip, reducing fatigue during prolonged use.
- The handle is coated with an anti-slip material, which includes a Biomaster additive. This additive provides permanent antimicrobial protection, ensuring hygiene and safety during food preparation.

This spatula is a must-have for every barbecue lover, combining functionality, safety and ease of use in one high-quality tool. Perfect for both experienced cooks and beginners, it ensures excellent results every time you fire up the grill.

Country of manufacture: Italy

Blade: made of surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 14cm

Total length: 30cm

Weight: 152g

Packaging: cardboard blade cover with Sanelli logos

For easy cutting vegetable garlands of 6 cm width.

For best results set the cutter on its foot and position it with one hand. Use the other hand to stick fruit and vegetable into the cone.

Start rotating.

An end holder helps to process the end pieces for minimum loss.

Hard plastic and stainless steel, 10 x 8,5 x 9 cm, cone Ø 7,5 cm, hardened stainless steel blade, dishwasher-safe.

Discover the excellence of the Premana Professional Line with the 11 cm Spelucchino. 
This semi-rigid blade knife is perfect for cutting and peeling fruits and vegetables with precision.

- It features a micro-serrated blade for ease of use and durability.
- The blade is designed to resist wear and tear, maintaining sharpness for a long time.
- Ergonomic handle made with double molding, offers a comfortable and secure grip thanks to the non-slip material enriched with Biomaster additive.
- It is ideal for daily professional and home use.

Don't miss this limited edition that combines quality, durability and innovative design. 

Country of production: Italy

Blade: surgical stainless steel with hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 11cm

Total length: 21cm

Weight: 35g

Packaging: cardboard blade cover with Sanelli logos

Recommended Use: Rigid carving knife ideal for cutting blocks of chocolate, vegetables and leathery fruits (e.g. pineapple, cardoons). The serrated blade is ideal for easily slicing all types of breads, even the crispiest ones.

Country of production: Italy
Blade: made of surgical stainless steel with a hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 210mm.
Total length: 338mm.
Packaging: cardboard blade cover with Sanelli logos
Weight: 194g.

THE BLADES.
The convex shape of the blade provides effective support when considerable effort is required by the user and is also characterized by: high hardness (54-56 HRC), good flexibility, high shearing power, long edge life, edge shape especially designed for professional use, excellent ease of resharpening.

HANDLES.
Exclusive ergonomic design of the handle resulting from special studies carried out at qualified University Institutes (research unit called EPM: Ergonomics of Posture and Movement at the Polytechnic University of Milan) and validated by computerized experimental tests.

ANTIBACTERIAL PROTECTION
Sanelli and Biomaster have developed permanent antibacterial protection for the handles of Premana line knives through the use of silver ions.

Recommended Use: Stiff, smooth and sharp blade knife with two points for cutting and serving cheese.

Country of manufacture: Italy
Blade: surgical stainless steel with a hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 180mm.
Total length: 310mm.
Packaging: cardboard blade cover with Sanelli logos
Weight: 139g.

THE BLADES.
The convex shape of the blade provides effective support when considerable effort is required by the user and is also characterized by: high hardness (54-56 HRC), good flexibility, high shearing power, long wire life, wire shape particularly designed for professional use, excellent ease of resharpening.

HANDLES.
Exclusive ergonomic design of the handle resulting from special studies carried out at qualified University Institutes (research unit called EPM: Ergonomics of Posture and Movement at the Polytechnic University of Milan) and validated by computerized experimental tests.

ANTIBACTERIAL PROTECTION
Sanelli and Biomaster have developed permanent antibacterial protection for the handles of Premana line knives through the use of silver ions.

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

The Premana Professional line from Coltellerie Sanelli S.r.l. is designed to meet the needs of kitchen professionals by offering high-quality tools. 
They guarantee superior safety, reliability and hygiene, with a combination of excellent hardness, flexibility and cutting power.
The line is unique and has high quality features not found in other professional lines.

Blade length: 30cm

- Ideal for pastry and cooking on a griddle or grill
- Flexible blade offering high performance and chipping resistance
- Ergonomic handle with double molding and non-slip material, enriched with Biomaster additive, ensures a safe and hygienic grip.

The Premana Professional line from Coltellerie Sanelli S.r.l. is designed to meet the needs of culinary professionals, offering high-quality tools that combine safety, reliability and hygiene.
It features an ergonomic design that improves grip and reduces fatigue during use. 
The double-molded handle uses non-slip material and Biomaster additive for improved hygiene.
The 18cm Chef's Spatula is versatile, suitable for working in pastry and cooking on a griddle or grill. 
The flexible blade has a high hardness (54-56 HRC) to ensure precise cuts and prevent chipping.
Patented in Europe and the United States, the Premana Professional line offers innovation and reliability, making it an excellent choice for professionals.

Blade length: 18cm

- Flexible spatula, ideal for pastry, griddle and grill cooking.
- Ergonomic double-molded handle
- Non-slip material with Biomaster additive
- High hardness (54-56 HRC)

The Premana Professional line from Coltellerie Sanelli S.r.l. is designed to meet the needs of culinary professionals, offering high-quality tools that combine safety, reliability and hygiene.
It features an ergonomic design that improves grip and reduces fatigue during use. 
The double-molded handle uses non-slip material and Biomaster additive for improved hygiene.
The 27 cm Folded Chef's Spatula is versatile, suitable for working in pastry and cooking on a griddle or grill. 
The flexible blade has a high hardness (54-56 HRC) to ensure precise cuts and prevent chipping.
Patented in Europe and the United States, the Premana Professional line offers innovation and reliability, making it an excellent choice for professionals.

Blade length: 27 cm.

- Flexible spatula, ideal for pastry and for griddle and grill cooking.
- Ergonomic double-molded handle
- Non-slip material with Biomaster additive
- High hardness (54-56 HRC)

The Premana Professional line from Coltellerie Sanelli has been created by analyzing and solving, in every detail, the problems faced by the professional, the private individual or the most attentive enthusiast who uses these working tools on a daily basis.

Use: Bread Knife

Blade: Surgical steel 54-56 HRC

Handle: Sterilizable anti-corrosion polymers

Blade length: 370mm.

Total length: 495mm.

Weight: 231g.

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Triangle - Stainless steel quenelle spoon cm 3X20,5

NOVELTY! 

Quenelle or nocken transform any cream or mass into a visual and culinary delight, taking decorative serving and portioning to the next level.

Quenelle line spoons by Triangle are available in two sizes.

The short handle is suitable for ergonomic work from the wrist.

The long handle is suitable for working in deep containers.

The GreenGrip, used for the handles of the Spirit series, is made of 98% bio-based plastic with 40% wood.

There are no limits to your creativity!

Ilsa - Coffee Maker Carmencita Pop alum. 6 cups - INDUCTION

The first item produced under the ILSA brand is the iconic Neapolitan coffee maker in 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are returning to coffee after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle for use on all hobs

Ilsa - Caffettiera Carmencita Pop aluminium 3 cups - induction

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first item produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of a regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its worldwide recognised Lavazza brand.

Ilsa - Carmencita Pop Aluminium 2 cups coffee maker - induction

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first item produced under the ILSA brand is the iconic Caffettiera Napoletana in 99% pure aluminium, which has become the symbol of a regained wealth on the tables of Italians who are returning to drinking coffee after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its Lavazza brand, recognised throughout the world.

Ilsa - Caffettiera Carmencita Pop aluminium 1 cup

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first article produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war. 

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium, to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on gas, glass-ceramic and electric hobs, perfect for an important gift thanks to its worldwide recognised Lavazza brand.

The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.

Before the moka, which has speeded up the preparation of coffee, the famous black drink was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.

NEAPOLITAN COFFEE POT 6 CUPS IN ALUMINIUM

The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.

The procedure then consists of the following steps:

1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.

2) Screw the filter on top of the tank.

3) Fill the perforated tank with water, always up to the indicated limit.

4) Insert the hollow tank into the perforated tank.

5) Add the body with the cap and screw in.

6) Place on the side with the water tank.

7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.

8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.

The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.

Before the moka, which speeded up the preparation of coffee, the famous black beverage was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.

CAFFETTIERA NAPOLETANA  3 CUPS IN ALUMINIUM

The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.

The procedure then consists of the following steps:

1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.

2) Screw the filter on top of the tank.

3) Fill the perforated tank with water, always up to the indicated limit.

4) Insert the hollow tank into the perforated tank.

5) Add the body with the cap and screw it on.

6) Place on the side with the water tank.

7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.

8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.

The 3376.08 pizza and porridge knife from Sanelli Premana is an ideal kitchen knife for cutting pizza, porridge and other similar dishes. The 8-cm wide blade is made of high-quality stainless steel with a hardness of 54-56 HRC, which ensures long edge life.

The blade features sharp, precise teeth designed to easily cut through even the crispest pizzas. The ergonomic handle made of polypropylene, a durable, non-slip material, provides a firm and comfortable grip during use.

Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.

Recommended Use: pan cutting of pizza, pinsa and Ligurian farinata

Country of manufacture: Italy

Blade: made of surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 80mm.

Total length: 180mm.

Packaging: cardboard blade cover with Sanelli logos

Weight: 33g.

The 1036.22 French serrated knife from Sanelli Premana is a professional kitchen knife ideal for cutting bread, tarts, cakes and other soft or crunchy foods.

The 22-cm-long serrated blade is made of high-quality X60CrMov14 stainless steel with a hardness of 54-56 HRC, which ensures a long edge life. The blade features sharp, precise teeth designed to easily cut through even the crispiest foods without crushing them.

The ergonomic handle made of polypropylene, a durable, non-slip material, provides a firm and comfortable grip during use.

Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.

Recommended Use: butchery, cutting tendons, nerves and for boning operations

Country of manufacture: Italy

Blade: made of surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 220mm.

Total length: 340mm.

Packaging: cardboard blade cover with Sanelli logos

Weight: 180g.

Sanelli Premana's American Scimitar BBQ Knife 3036.23 is a professional kitchen knife ideal for cutting grilled meat and other large foods.

The 23-cm-long curved blade is made of high-quality X60CrMov14 stainless steel with a hardness of 54-56 HRC, which ensures long edge life. The shape of the blade, inspired by the traditional American scimitar, allows for easy cutting through meat and easy removal of bone and cartilage.

The ergonomic handle made of polypropylene, a durable and non-slip material, allows a firm and comfortable grip during use.

Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.

Recommended Use: cutting cooked meats, roasts, barbecues, trimming

Country of manufacture: Italy

Blade: made of surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 230mm.

Total length: 370mm.

Packaging: cardboard blade cover with Sanelli logos

The 3276.12 steak knife from Sanelli Premana is an ideal kitchen knife for cutting meat on the table.

The 12-cm-long blade is made of high-quality X60CrMov14 stainless steel with a hardness rating of 54-56 HRC, ensuring long edge life. The blade features a sharp edge designed to cut meat with ease and precision.

The ergonomic polypropylene handle, a durable, non-slip material, provides a firm and comfortable grip during use.

Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.

Recommended Use: table knife for cutting and eating steak, rib eye and cooked meats

Country of manufacture: Italy

Blade: made of surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 120mm.

Total length: 220mm.

Packaging: cardboard blade cover with Sanelli logos

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Drop stop

DropStop® is a patented and registered trademark. DropStop® is an invention by Danish inventor Brian Vang Jensen, who came up with the idea after being involved in an embarrassing situation at a dinner party a few years ago.

How do you explain its success?

Essentially for three reasons:

• Its excellent design
• Its ease of use
• Its proven effectiveness in solving a known problem
• DropStop® encompasses all these features. Aesthetically appealing, easy to use and extremely functional, DropStop® has become a worldwide success and is used in millions of wine bottles in over 40 countries. DropStop® adapts to every type of bottle. DropStop® is a unique invention that is indispensable for all wine lovers. Drop Stop® is made of aluminium coated with food-grade PVC and therefore does not alter the taste of the wine.
• The new dropstop contains various packages with 4 different sayings:
• Wine is the poetry of the earth,
• Water divides men, wine unites them.
• Life is too short to spill great wine .
• Congrats.
• The simplicity of DropStop® solves one of the most annoying inconveniences of pouring wine. By rolling up the disc and inserting it into the neck of the bottle, the thin DropStop® thread cuts the drop perfectly, so as not to soil the tablecloth. DropStop® is made of multilayer laminate (PET and aluminium) and is fully suitable for food contact. The easy-care material allows for easy and frequent cleaning under running water and can be used without restriction for years.

The Final Touch set consists of a tasting spoon with integrated tweezers, a plate decorator and precision tweezers.

The Final Touch set tools are made of high-quality stainless steel and food-safe silicone.

The Final Touch Set made by triangle® Solingen is dishwasher-safe.

Sanelli's wide frying spatula is an essential tool for turning, lifting and serving fried foods with precision and ease. 
The 17 cm wide blade is ideal for handling foods such as pancakes, fish and eggs, minimizing the risk of damaging them.
Made of durable, high-quality materials, it ensures durability and reliability. 
The thin, sharp blade glides easily under food, while the ergonomic handle provides a comfortable and secure grip.
Coltellerie Sanelli's Premana Professional line is designed to meet the needs of professionals, enthusiasts and home users, offering quality and versatility in the kitchen.

Blade length: 17cm

Double-sided triangle Melon Baller Ø 22/25 mm (0.85 / 1 inches) with sharpened edges creates balls from fruits, vegetables, cream or butter.

Stainless steel and dishwasher-safe.

Made in Solingen/Germany.

More and more consumers buy with their eyes first and perceive details that we sometimes don't pay attention to. The way in which products are presented and the way in which the fruit and vegetable counter is set up is therefore becoming truly strategic! A successful and appealing idea comes from the so-called 'carving' of fruit and vegetables. It seems that the first evidence of the art of fruit and vegetable carving dates back to the end of the 14th century in Thailand. During royal celebrations, fruit sculptures were placed in crowns made of woven banana leaves and given to the river as a sign of purification and thanksgiving. The idea is said to have come from the emperor's wife, who was the first to prepare a buffet of fruit and vegetables transformed into flowers and animals. The secret to achieving impressive sculptures is to buy products with a solid consistency and to use lemon juice to prevent the compositions from turning black. Carrots, tomatoes, pineapples, radishes... are products that stimulate very creative carving. And in this season definitely melon and watermelon. Kitchen utensils from the German company Triangle, designed down to the last detail, created with a great deal of knowledge, with a very simple use and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality tools with excellent sharpness. A wide range of tools for carving and decorating fruit and vegetables.

Triangle - Carving Knife V shape large

Fruit carving knife Kitchen utensils from the German company Triangle, designed down to the smallest detail, created with a great deal of craftsmanship, with very simple handling and a functionality that brings constant pleasure. Since 1946, the company Triangle GmbH (formerly Hill Metallwaren GmbH) in Solingen has been producing a wide range of kitchen utensils for private and professional use. The company produces high-quality utensils with excellent sharpness. Wide range of utensils for carving and decorating fruit and vegetables.

Knife for carving and decorating fruit and vegetables, V-shaped and 1.5 cm wide.

Ideal for carving watermelons and melons.

Non-slip handle

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Founded in 15 BC during the reign of Emperor Augustus, Augusta competed with other German cities for the title of the oldest city in Germany. The old part of the historic center is considered the third largest in Germany, after Hamburg and Cologne.

The imperial city of Augsburg was renowned for its armor makers, which included the Helmschmied family and the master gunsmith Lorenz. The Helmschmied of Augsburg, Germany, were one of the most important late medieval European families of armorari / gunsmiths. Their name, sometimes also spelled Helmschmid, translates to "blacksmith helmet". The most important members of the family were Lorenz Helmschmied (active in 1467, died in 1515), Kolman Helmschmied (1471-1532) and Desiderio Helmschmied (1513-1579)

This armor is reconstructed on a model of the sixteenth century, manufactured by this illustrious foundry. Although it is made not to be worn, it retains all the aesthetic beauty and characteristics of full armor.

Handcrafted from 18 gauge mild steel and crafted by the artisans at Windlass Steelcrafts, this armor comes with a museum quality heavy wood pedestal base, decorative waist skirt, and wooden inner shape.

The helmet can accept up to three decorative plumes (sold separately).

Perfect for decorating a tavern, a living room, a business

Measurements:
Total height: 205 cm
Armor height: 182 cm
Base length: 55 cm
Base width: 55 cm
Base height: 23 cm
Weight: about 50 kg

Fully wearable reproduction of Themistokles helmet from the movie 300 Rise of an Empire.

The helmet is made of steel with an antique bronze finish, has a soft padded fabric lining inside, adjustable with leather laces, which can be worn by most people.

Dimensions: about 30 x 30 x 20 cm

The 8cm 3336.08 Spelucchino knife from Sanelli Premana is a small kitchen knife, ideal for precision kitchen tasks such as peeling and cutting fruits and vegetables.

The 8-cm blade is made of high-quality X60CrMov14 stainless steel with a hardness of 54-56 HRC, which ensures a long edge life. The blade has a sharp edge designed to cut cleanly and precisely.

The ergonomic polypropylene handle, a durable, non-slip material, provides a firm and comfortable grip during use.

Sanelli Premana is an Italian company specializing in the production of high-quality kitchen knives used in both professional and domestic settings. Their products are known for their reliability, durability and precision, and are highly valued by restaurant professionals worldwide.

Recommended Use: vegetable paring knife, utility knife

Country of manufacture: Italy

Blade: made of surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 80mm.

Total length: 185mm.

Packaging: cardboard blade cover with Sanelli logos

Weight: 33g.

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

The Sanelli Premana - Serrated Pizza Knife 16cm - 3846.16 is a professional knife, but it is also perfect for home use. It is ideal not only for cutting pizzas, but also for cutting other soft or delicate foods such as desserts. Due to its high quality and durability, this kitchen knife is a safe investment for those looking for a long-lasting tool with a stylish design.

The 16 cm long serrated blade is made of high quality X60CrMov14 stainless steel, which ensures long life and great wear resistance. The serrated blade makes it easy to cut pizza without tearing the crust or crushing the filling.

The ergonomic handle is made of high-quality polymer and provides a firm and comfortable grip, even when working for long periods of time. In addition, the handle is resistant to temperature, chemicals and corrosives, ensuring easy cleaning and maintenance of the knife.

Recommended Use: cutting pizza, pinsa and focaccia

Country of manufacture: Italy

Blade: made of surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 160mm.

Packaging: cardboard blade cover with Sanelli logos

The Sanelli - Cream Spatula 12 cm - 3766.12 is a kitchen utensil designed to aid in the preparation of desserts, creams and sauces. The spatula blade, 12 cm wide, is made of high-quality stainless steel, which ensures long life and great resistance to wear and tear. In addition, the blade is flexible, making it easy to spread creams and sauces evenly.

The ergonomic handle is made of high-quality polymer and provides a firm and comfortable grip, even when working for long periods of time. In addition, the handle is resistant to temperature, chemicals and corrosives, ensuring easy cleaning and maintenance of the tool.

Use: Cream 12 Spatula with straight blade suitable for decorating cakes, cupcakes, pastries, and more. Perfect for use with creams, cream, ganache and jams.

Blade: Surgical steel 54-56 HRC

Handle: Sterilizable anti-corrosion polymers

Blade length: 120 mm.

Packaging: cardboard blade cover with Sanelli logos

The Sanelli - 2-Cut Potato Peeler - 342607 is a useful kitchen accessory for easily peeling potatoes and other vegetables. This potato peeler has two sharp stainless steel blades to remove the peel easily and quickly. One of the two blades is smooth, while the other is zig-zagged to create a wavy effect on the surface of the vegetable.

The peeler's ergonomic handle is made of polypropylene and provides a firm and comfortable grip during use. In addition, the thin blade design allows even the smallest potatoes to be peeled with precision.

It is a versatile and practical kitchen accessory, perfect for those who want to save time when preparing meals. With its durable construction and ease of use, this potato peeler is a useful addition to any home kitchen.

Handle: sterilizable anti-corrosion polymers

Packaging: cardboard blade cover with Sanelli logos

The Sanelli Premana - Serrated Chocolate Knife 25cm - 3076.25 is a kitchen knife specially designed to cut chocolate precisely and quickly. The high quality stainless steel serrated blade, 25 cm long, features a special design that ensures a clean and precise cut of chocolate, avoiding spoiling or breaking it.

The ergonomic handle is made of high-quality polymer and provides a firm and comfortable grip, even when working for long periods of time. In addition, the handle is resistant to temperature, chemicals and corrosives, ensuring easy cleaning and maintenance of the tool.

It is a professional kitchen tool, but it is also perfect for home use. It is ideal for cutting chocolate precisely and evenly, without risking ruining it. Due to its high quality and durability, this kitchen knife is a safe investment for those looking for a long-lasting tool with a stylish design.

Recommended Use: cutting and shredding chocolate

Country of manufacture: Italy

Blade: surgical stainless steel with a hardness of 54-56 HRC

Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive

Blade length: 250mm.

Packaging: cardboard blade cover with Sanelli logos

Recommended Use: cutting and preparing vegetables, fish and white meat

Country of manufacture: Italy
Blade: surgical stainless steel with hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 160mm.
Total length: 285mm.
Packaging: cardboard blade cover with Sanelli logos.
Weight: 166g.

FORM AND FUNCTION
The Premana Professional line was created by analyzing and solving, in every detail, the problems faced by the most attentive professional who uses these working tools on a daily basis. By making the green knives of the Premana Professional line, Coltellerie Sanelli S.r.l. has significantly improved the concept of safety, reliability, and hygiene in a decisive way, paying attention not only to the hardness, flexibility and shearing power of the blades, but also to the ergonomic shape of the handle.

THE BLADES.
The convex shape of the blade provides effective support when considerable effort is required on the part of the user and is also characterized by: high hardness (54-56 HRC), good flexibility, high shearing power, long edge life, edge shape especially designed for professional use, and excellent ease of resharpening.

HANDLES.
Exclusive ergonomic design of the handle resulting from special studies carried out at qualified University Institutes (research unit called EPM: Ergonomics of Posture and Movement at the Polytechnic University of Milan) and validated by computerized experimental tests.

ANTIBACTERIAL PROTECTION
Sanelli and Biomaster have developed permanent antibacterial protection for the handles of Premana line knives through the use of silver ions.
Biomaster is a silver ion-based, inorganic additive suitable for imparting antibacterial characteristics to plastics that safely inhibits microbial growth from the first few minutes, reaching almost total inhibition within 24 hours. Once incorporated into a product, Biomaster becomes an integral part of it providing safe, effective and inexhaustible antimicrobial protection.
Laboratory tests have shown that Biomaster, incorporated into the handles of Sanelli Premana Professional Line knives, is effective in the permanent microbiological eradication of Escherichia Coli and Staphylococcus Aureus (MRSA) to the extent of 99.7 percent, obtaining ISO22196:20111 certification.

Suitable for both home and professional use, made of stainless steel to guarantee a quality that lasts over time.
Made in Premana - Italy
Total length 210 mm

Computer designed and laser cut, in two pieces assembled with stainless steel screws

Exceptional characteristics of strength and lightness.

Aisi 420 chrome-moly stainless steel.

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock