JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Last up date

Brainstream - Drip.it+ bottle drainer

Drip.it+ bottle drainer

Length: 37.5cm - 56.5cm (extendable)

Width: 10.5cm

Weight: 358g

Stainless steel insert included

Material: silicone + stainless steel

Inventor: Susanne Richter (SanniShoo)

Cleaning likes to decorate... Everyday life around the sink.

drip.it offers the ideal solution for various ‘draining scenarios’. The stainless steel insert makes it the perfect mobile and easily stowable draining station for almost all types of reusable bottles. Whether glass bottles, modern thermo bottles or baby bottles.

Heat-resistant silicone rings protect the bottles from scratches. Up to three bottles can be drained at the same time with drip.it+. There is also space for bottle caps, brushes, sponges etc. on an extra shelf.

Freshly washed salad or cooked pasta can also be easily drained in the sieve (sieb.up) with the help of drip.it+. -drip.it+ is extendable and therefore fits perfectly on any sink.

This makes it ideal for use as a flexible colander holder for draining washed or cooked food over the sink. Fewer germs on the sink thanks to better drying bottles, dishcloths, sponges and brushes. A simple idea, but a real jack-of-all-trades that can do a lot.

A005883

€24.59

Only 8 left

Only 8 left
Rivsalt - Salt Crystals Refill 150gr - Kala Namak Salt

The BLACK set contains three sparkling Kala Namak salt stones from India, a unique ingredient that adds a secret touch to your dishes.
Kala Namak salt stands out for its distinctive flavor, with a slight hint of egg hidden behind spicy and slightly smoky notes, thanks to its high sulfur content.
Ideal for vegan cooking, Kala Namak salt is perfect for dishes such as scrambled tofu, chickpea omelets, and fruit salads. It adds a distinctive flavor that enhances any recipe.
A Unique Touch to Your Dishes
With its sparkling stones and extraordinary flavor, Kala Namak salt from the BLACK set will turn every dish into an unforgettable culinary experience.
Add this special ingredient to your cooking and discover new flavor possibilities.

RIV018

€16.39

Only 2 left

Only 2 left
Rivsalt - Salt Crystals Refill 150gr - Mixed Salts

Enrich your kitchen with these three salt rocks from different parts of the world, perfect for adding variety and inspiration to your dishes.
Each rock has a unique flavor and can be grated directly onto pots, pans, fish, and meat.
In addition to being delicious, these salts are beautiful to look at, resembling gemstones, and are an elegant addition to the kitchen and dining table.

Salt Rocks Included in the Set:

Bolivian Rose Salt Rock: This salt is mild and sweet, ideal for everyday cooking. Perfect for meat and vegetable dishes, it adds a refined and flavorful touch.

Cubic Halite Salt Rock: With a natural but rather intense flavor, this salt is perfect for those seeking a robust and assertive taste.

Kala Namak Salt Rock: This salt has a spicy and slightly smoky flavor with a hint of egg due to the high sulfur content, making it unique and intriguing for various culinary preparations.

RIV032

€16.39

Only 2 left

Only 2 left
Rivsalt - Chili Grater Set - rivsalt chili

Rivsalt was born from the mind of designer

Swedish designer Jens Sandriger during a trip to Beijing.

Having dinner at a famous Japanese restaurant in the city, Jens thought: this is really cool!

Before his eyes, the chef had just ground a Himalayan pink salt gem directly onto the guests' plates. That's when the Rivsalt idea was born: a unique dining experience that puts salt truly at the center of the table and the kitchen. From China to Sweden, the Rivsalt family of products soon spread around the world, becoming a must-have for taste enthusiasts.

The elements that make up the Rivsalt family of products are a synthesis of what the Earth offers and what man can skillfully work with.

Untreated oak bases and stainless steel graters highlight natural raw materials that are anything but common and, at times, rare.

Each element in the Rivsalt line fills objects hitherto considered everyday with meaning and value: salt, licorice, pepper, and toothpick become experiences out of the ordinary.

CHILI is about flavor and experience. Just like RIVSALT. So creating the chili product seemed natural to us.

A perfectly shaped grater made of stainless steel, an oak wood stand, and the best selection of chili peppers we could find.

Another Scandinavian gastronomic experience by RIVSALT.

The RIVSALT product range was designed by Swedish entrepreneur and designer Jens Sandringer. RIVSALT is about design, communication, and experience. Grating your own Rivsalt salt and spices simply adds flavor and style to any dining experience. The beautiful design can enhance the dining table. Many of the table accessories are also great communication items.

RIVSALT products are unique gifts for foodies and home chefs.

RIV-024

€28.68

Only 1 left

Only 1 left
Rivsalt - Ginger &Turmeric Set Grater

GINGER & TURMERIC - PREMIUM SUN DRIED PIECES GINGER & TURMERIC are old best friends from India. Used in many of the same dishes, they complement each other extremely well – like most best friends do. These dried roots belong to the Zingiberaceae family and are said to have remarkable health benefits - possibly even more so together with grated PEPPER. For some extra zing, use the elegant spoon-grater to stir the grated roots into a classic curry, a delicious Caribbean sweet potato soup or your breakfast chia seed pudding. Or why not grate and stir into a fresh cocktail or your favorite smoothie? Works great on top of your morning latte, tea or super-healthy detox shot, too. A true RIVSALT gastronomic experience every time. When not in use, the stainless steel spoon-grater rests gracefully on the carefully carved oakwood stand - making it a beautiful centerpiece on your dining or kitchen table.

1561GINGER

€24.59

Only 2 left

Only 2 left
Rivsalt -Freeze & Serve - Himalayan Salt Plates

Rivsalt -Freeze & Serve - Himalayan Salt Plates FREEZE & SERVE includes four himalayan salt plates, which turn any starter or dessert into a RIVSALT gastronomic experience. to use, simply pop the plates into your freezer for a couple of hours and take them out again just before serving. the plates have one flat side; great for starters like sashimi, tartar or salad, and another side with a rounded cavity; perfect for desserts like vanilla ice cream with grated raw LIQUORICE. In Michelin 2-star restaurant, Vila Joya in Albufeira Portugal, FREEZE & SERVE plates are used to exquisitely present butter. How to freeze & serve Freeze the plates for 2-3 hours. Take out just before serving. After using, wipe clean with a sponge using as little water as possible and no detergent. Dry with a kitchen towel. Leave to dry for at least 12 hours before placing back in original packaging. Store in low humidity conditions.

RIVFREEZE

Special Price €26.08 Regular Price €28.69

Only 1 left

Only 1 left
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-CB-CLIP

€12.30

Only 8 left

Only 8 left
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-PRY

€20.49

Only 1 left

Only 1 left

Out of stock
Brainstream - BeepEgg Classic - ONE EGG FITS ALL

Brainstream - BeepEgg® Classic - ONE EGG FITS ALL BeepEgg® Classic is a precise egg-timer, which as with any other BeepEgg® will be boiled together with the real eggs. Once yolk and egg-white have reached the desired degree of hardness, BeepEgg® will play three tunes for the different levels of hardness.

5943CREGG

€7.78

Only 4 left

Only 4 left
Rivsalt - Salt Crystal Refill 150gr - Persian Blue Salt

BLUE ROCK SALT is a unique and valuable product, perfect for enriching seafood dishes, salads, French cuisine and truffles.
This rare salt is distinguished by its initially strong flavor, which evolves into a delicacy characterized by a silky, velvety sweetness.
Blue salt is extracted from a salt mine located in the Middle East.
Its intriguing blue color is formed during salt crystallization, a process that occurs under intense pressures acting on salt deposits.
This phenomenon leads to light fracturing through the individual crystals, creating an optical illusion that gives the salt a distinctive, shimmering blue color.

RIV010

€18.03

Only 1 left

Only 1 left
Herold Solingen - Stropping paste - Medium Grain - stropping

Paste for high quality strop, which is essential for the maintenance of freehand razors. It can also be used for knives and gouges.

Grain: medium.

Ingredients: vegetable oils and fats, dye, abrasive elements.

Content: 5 ml.

11107

€5.74

Only 6 left

Only 6 left

Rating:
100%
5
Herold Solingen - Stropping paste - Fine Grain - stropping

Pasta for high quality strop, which is essential for the maintenance of freehand razors. It can also be used for knives and gouges.

Grain: fine.

Ingredients: vegetable oils and fats, dye, abrasive elements.

Content: 5 ml.

11106

€5.33

Only 5 left

Only 5 left

Rating:
100%
5
Rivsalt - Big Grater & Stand for pink salt Himalayano

Rivsalt - grater pink salt Himalayano- Rivsalt is a new way to appreciate a vital and valuable as the salt. It consists of a rose bud pure Himalayan salt, a mini-grater Japanese stainless steel and a cylindrical base of oak untreated. Each bud of Himalayan salt has an irregular shape, different from one another, each grain that is ground is unique: can be pink, like crystal from which it comes, or white, as the striations that characterize it. Rivsalt you take the right of the center of your table, creating a satisfying experience gustatory, tactile and visual.

1561BIG

€40.16

Only 1 left

Only 1 left

Out of stock
G.A.T. - Gatpuccino - All in One - Cappuccino - Espresso

G.A.T. - Gatpuccino (articles FOR house) Cafe Caffe is a brand that includes a collection of mock expressed high quality designed for the coffee lover Italian. The entire collection Cafe Caffe is distinguished by Italian design and manufacture. WHAT 'GATPUCCINO? It 'the first product that allows you to bring the true taste of Italy to your home: cappuccino, espresso, latte macchiato, hot chocolate ... all in one article! The GatPuccino is the combination of the classic Italian mocha and a bollilatte (editor) can heat and mount milk, coffee and chocolate. Both are based on an electrical basis and can work simultaneously or individually through two simple buttons equipped with LEDs with different colors.

5347GC

€89.34

Only 3 left

Only 3 left
Rivsalt - Salt Crystal Refill 150gr - Himalayan Pink Salt
Discover the RIVSALT refill pack, with three Himalayan pink salt rocks totaling about 150 grams.
This pure and natural salt, unrefined and without chemical treatment, is rich in minerals, including iron and magnesium.

THERE IS SALT AND SALT

RIVSALT transforms salt into a taste and visual experience with unique salt rocks, each with different shades of pink and white.

Benefits of Himalayan Pink Salt

Reduces the risks of hypertension and water retention

Supports respiratory activity

Promotes more regular sleep

Himalayan salt gems are pure and pristine, retaining their original quality for millions of years.
Bring the purity of Himalayan salt to your table with RIVSALT.
1561S-RIC

€9.84

Only 3 left

Only 3 left
G.A.T. - Seals with original filter for Coffee G.A.T. 3-4 CUPS

Ricambio per caffettiera G.A.T. da 3 tazza in alluminio o 4 tazze in acciaio inox. La confezione comprende 1 filtro in alluminio e 2 guarnizioni in silicone.

5347-3G

€2.46

Only 2 left

Only 2 left

Rating:
80%
4
G.A.T. - Seals with original filter for Coffee G.A.T. 1-2 CUPS

Ricambio per caffettiera G.A.T. da 1 tazza in alluminio e 2 tazze in acciaio inox. La confezione comprende 1 filtro in alluminio e 2 guarnizioni in silicone.

5347-1G

€2.05

Only 10 left

Only 10 left

Out of stock
G.A.T. - Aluminum Coffee Maker - Moka Magnifica - 6 tz - also for induction

Home Sweet Home. The Magnifica mocha, with its wood-effect knob and handle, is to create a warm family atmosphere because, the elegance given to it by the special mirror polish treatment and its adaptability to any heat source, make it unique in the kitchen. Cafè Caffe is a brand that includes a collection of high-quality espresso mokes designed for customers who love Italian coffee. The entire Cafè Caffe collection is distinguished by Italian design and manufacture. The models are packaged in an elegant box that recalls the preciousness of gold and the aroma of coffee. AVAILABLE MEASURES: 1-3-6-9 cups SOURCES OF HEAT: induction, fire, ceramic glass, electric hot plate.

5347-6

€27.05

Only 6 left

Only 6 left
RIIS - Silicone Meatbag 2 Pieces - Kitchen

It is an essential accessory in the kitchen. Meatbag is suitable for cooking, heating, freezing, thawing or marinating meat and vegetables. Meatbag can also be used to heat food in the microwave, but do not seal the bag.

This accessory comes in two sizes, is approved for use with food, and is made of silicone and rubber. It is dishwasher safe.

Sizes:

Large: 32 x 25 cm

Small: 26 x 18 cm.

1154R

Special Price €23.69 Regular Price €27.87

Only 1 left

Only 1 left
Inoxpran - Stainless steel creamer Dolcevita 4 cups

Inoxpran - Stainless steel creamer Dolcevita 4 cups Triple bottom for induction. Steel inox 18-10

4598T

€7.79

Only 1 left

Only 1 left
G.A.T. - Caffettiera in alluminio - Moka Magnifica - 1 tz

Casa dolce casa. La moka Magnifica,

dal pomolo e manico con effetto legno,

ha lo scopo di creare una calda atmosfera familiare

perchè l'eleganza conferitale dallo speciale

trattamento di lucidatura

la rendono unica in cucina.

Cafè Caffe è un brand che comprende una collezione di moke espresso di alta qualità pensata per l'amante del caffè italiano.

Tutta la collezione Cafè Caffe si distingue per il design e fabbricazione italiana.

I modelli sono confezionati in un'elegante scatola che richiama la preziosità dell'oro e l'aroma del caffè.

MISURE DISPONIBILI: 1-3-6-9 tazze FONTI DI CALORE: fuoco, vetro ceramica, piastra elettric. non va sull'induzione.

5347-1

€13.11

Only 2 left

Only 2 left
Brainstream - BeepEgg Classic - ONE EGG FITS ALL

Brainstream - Beep Egg BOILING EGGS THE EASY WAY - [EGG]STREMELY GOOD GIFTS The singing and floating egg-timer guarantees perfectly boiled eggs and lots of fun. BeepEgg is a precise egg-timer, which is boiled together with the real eggs. Once yolk and egg-white have reached the desired degree of hardness, BeepEgg® will play a tune. The inner high t[egg] components of BeepEgg® always work and are “Made in Germany”. This functionality, combined with a certain sense of humour, makes BeepEgg® an ideal gift for numerous occasions. Here is another cool, innovative and fun item that is actually really useful. Do you like your eggs cooked egg-sactly right but have trouble timing them to perfection? The Beep Egg is the solution! The easy way to cook eggs, Beep Egg can sense when the conditions in the pan are just right for an egg to be soft-boiled, medium-cooked or hard-boiled. A temperature sensor detects when the water is boiling and then from that point, a timer will start to count down until the perfect conditions are reached for the ideal egg.Simply put the Beep Egg into the water with your real eggs and cook it in there with them. When the eggs are ready, the Beep Egg will play you a tune! When they are done, you lift the Beep Egg out of the water with your now-perfectly boiled eggs, rinse it off and it is ready to be used next time! The Beep Egg is an ideal gift for anyone who hates cooking but has to boil an egg occasionally, or anyone that loves cooking but has so much on the go at once, they need a little help to keep track of it all! No more morning disappointments - enjoy your eggs exactly as you want them, every time! For those of you with large families with different preferences - use several Egg-Beeps at the same time! The Egg-Beep will play its melody for 3 minutes, or until cooled off using cold water. When not in use, store it in the fridge to keep it at the same temperature as your eggs.

5943

Special Price €11.80 Regular Price €14.75

Only 1 left

Only 1 left
Smith & Wesson - USA SW-610 Caper Skinner First Production Knife - hunting knife

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: USA
Handle: kryton
Blade length: 65mm.
Blade thickness: 4mm.
Length closed: -
Total length: 197mm.
Balancing: -
Weight: 100g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

SW-610

€69.67

Out of stock
Smith & Wesson - Tanto Boot Knife - SWHRT7T - tactical knife

H.R.T. Hostage Rescue Team

The Hostage Rescue Team (HRT) is the FBI's elite Special Operations tactical and counterterrorism SWAT Team. The HRT is trained to rescue US citizens who may be held illegally by hostile forces, either terrorist or criminal. Smith & Wesson has made a series of knives with this job in mind. The HRT knives are designed to meet the specific needs of these Military and Law Enforcement applications, and they mean business!

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: Use
Handle: aluminum
Blade length: 120mm.
Blade thickness: 4mm.
Length closed: -
Total length: 230mm.
Balancing: set back - 2cm. from the guard branch
Weight: 118g.
Closing: -
Clip: -
Sheath: leather
Note: late 90s production "

SWHRT7T

€61.47

Out of stock
Smith & Wesson - SW990 Neck Knife Fixed Blade - fixed knife

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: China
Handle: Zytel
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 175mm.
Weight: 42g.
Closing: -
Notes: whistle included in the sheath
Sheath: Kraton

SW990

€28.69

Out of stock
Smith & Wesson - CH200 Bullseye Hunting Knife Fixed - hunting knife

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: China
Handle: rubber
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: -
Total length: 235mm.
Balancing: -
Weight: 160g.
Closing: -
Note: -
Sheath: cordura

CH200

€57.38

Out of stock
Smith & Wesson - S.W.A.T. Utility Folder Knife - SW24-7B - tactical knife

Intended use: sports

Type of production: industrial
Blade: full tang in 440B stainless steel
Blade treatment: -
Lama production: China
Handle: kryton
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Weight: 102g.
Closing: -
Clip: in steel
Sheath: -
Note: -

SW24-7B

€45.08

Out of stock
Smith & Wesson - H.R.T. Tactical Tanto Knife - SWHRT4 - tactical knife

H.R.T. Hostage Rescue Team

The Hostage Rescue Team (HRT) is the FBI's elite Special Operations tactical and counterterrorism SWAT Team. The HRT is trained to rescue US citizens who may be held illegally by hostile forces, either terrorist or criminal. Smith & Wesson has made a series of knives with this job in mind. The HRT knives are designed to meet the specific needs of these Military and Law Enforcement applications, and they mean business!

Intended use: sports

Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: USA
Handle: kryton
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: -
Total length: 210mm.
Balancing: set back - 2cm. from the guard branch
Weight: 112g.
Closing: -
Clip: -
Sheath: Kraton
Note: late 90s production "

SWHRT4

€61.47

Only 0 left

Only 0 left

Rating:
93%
4.7

Out of stock
Smith & Wesson - SW650 Small Hunting Knife - hunting knife

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Use
Handle: kryton
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: -
Total length: 200mm.
Balancing: -
Weight: 76g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "

SW650

€69.67

Only 0 left

Only 0 left

Rating:
87%
4.4

Out of stock
Smith & Wesson - SW-960 Fighter knife - tactical knife

Intended use: sports

Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Use
Handle: kryton
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: -
Total length: 283mm.
Balancing: set back - 2cm. from the guard branch
Weight: 166g.
Closing: -
Clip: -
Sheath: Leather
Note:

SW-960

€106.56

Out of stock
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!

No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

KEY-CUT

€0.00

Only 0 left

Only 0 left

Out of stock
Key-Bar - Screw Extension Kit - KeyBar Accessory

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-EXT

€0.00

Only 0 left

Only 0 left

Rating:
93%
4.7

Out of stock
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-DC-CLIP

€0.00

Only 0 left

Only 0 left

Out of stock
Key-Bar - Aluminum Key Ring with titanium clip - AKB

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

SQRAL

€49.18

Out of stock
Key-Bar - Titanium Keychain with titanium clip - TKB

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

SLAY-TKB

€0.00

Only 0 left

Only 0 left

Out of stock
Herold Solingen - Strop Leather Double Grane - stropping kit

High quality strop for maintenance of razors, knives and gouges.

On the side is the Classic Leather (20 x 4 cm, thickness 2.5 mm) and on the darker a bit more raw leather (20 x 4 cm, thickness 2.5 mm) to use when using the classic one is no longer enough .

The strop is not adjustable, but thanks to the spaces inside the wooden structure and the red felt inserts are ensured flexibility ..

Dimensions (including handle) 31.5 x 3 x 4 cm, 120 gr weight.

11102

€0.00

Only 0 left

Only 0 left

Out of stock
Herold Solingen - Leather Strop Double Grain - Sharpening Tool

The Herold Solingen double-grain leather strop is the ideal accessory to ensure maximum precision and effectiveness in the maintenance of straight razors and other high-quality cutting tools.

Made in Solingen, the world capital of precision cutting tool production, this strop features a double-sided surface with natural leather and red paste, designed to meet both finishing and sharpening needs.

The natural leather side provides gentle and even smoothing, perfect for refining the razor edge, while the red paste-treated surface offers additional sharpening, making the tool ready for use with just a few strokes.

An essential accessory for traditional shaving enthusiasts and professionals who seek the highest quality.

High-quality strop for the maintenance of razors, knives, and gouges.

Intended use: Maintenance of straight razors and cutting tools
Type of production: Handcrafted
Country of manufacture: Germany
Material: Natural leather with red paste on one side
Natural side finish: Smooth leather
Pasted side finish: Red smoothing paste
Leather thickness: 4mm
Weight: 150g
Packaging: Cardboard box with Herold Solingen branding
Notes: High-quality product for professional and personal use.

11101

€36.89

Only 0 left

Only 0 left

Rating:
80%
4
BenchMark - Training Bali - BM006 - Training knife

*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***

Intended Use: Training

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.

BE-BM006

€40.16

Only 0 left

Only 0 left

Out of stock
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

KEY-G10-ODGRN

€54.92

Out of stock
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

KEY-G10-BLK

€54.92

Rating:
100%
5

Out of stock
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-BLK-ANOAL2

€51.64

Rating:
100%
5

Out of stock
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-WHTBLK

€65.57

Rating:
90%
4.5

Out of stock
Herold - Strop Belt

Strop belt Extra Large, to straight razor, the German Dovo. Historical company of Solingen, specialized in the manufacture of cutting tools of high and very high quality.

Handle: leather
Strop: high-grade leather (leather back)
Strop Length: 39cm useful (7,8cm height - 3 mm thick)
Overall Length: 57.5 cm (hooks included)

coramella-cinghia

€54.92

Only 0 left

Only 0 left

Rating:
100%
5

Out of stock
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

KEY-AM-FLG-TKB

€59.84

Out of stock
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

KEY-SPLTRKB

€98.36

Out of stock
Key-Bar - Accessory comb titanium - CO

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-TCMB

€17.21

Out of stock
Key-Bar - Titanium Keychain with titanium clip - TKB

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

KEY-TKB

€54.92

Only 0 left

Only 0 left

Rating:
83%
4.2

Out of stock
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB

keychain with titanium clip - ACFKB
Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

KEY-CFTKB

€63.93

Only 0 left

Only 0 left

Rating:
97%
4.9

Out of stock
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-ACFKB

€54.10

Only 0 left

Only 0 left

Rating:
60%
3

Out of stock
Key-Bar - Aluminum Key Ring with titanium clip - AKB

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

KEY-AKB

€34.43

Only 0 left

Only 0 left

Rating:
90%
4.5

Out of stock
G.A.T. - Seals with original filter for Coffee G.A.T. 6 CUPS

Ricambio per caffettiera G.A.T. da 6 tazze in alluminio o in acciaio inox. La confezione comprende 1 filtro in alluminio e 2 guarnizioni in silicone.

5347-6G

€2.87

Only 0 left

Only 0 left

Out of stock
G.A.T. - Aluminum Coffee Maker - Moka Magnifica - 9 tz - induction

Home Sweet Home. The Magnifica mocha, with its wood-effect knob and handle, is to create a warm family atmosphere because, the elegance given to it by the special mirror polish treatment and its adaptability to any heat source, make it unique in the kitchen. Cafè Caffe is a brand that includes a collection of high-quality espresso mokes designed for specialized retailers and coffee shops. The entire Cafè Caffe collection is distinguished by Italian design and manufacture. The models are packaged in an elegant box that recalls the preciousness of gold and the aroma of coffee. AVAILABLE MEASURES: 1-3-6-9 cups SOURCES OF HEAT: induction, fire, ceramic glass, electric hot plate.

5347-9

€42.62

Only 0 left

Only 0 left

Out of stock
Inoxpran - Teapot steel Dolcevita -10 cups

Inoxpran - Teapot steel Dolcevita -10 cups Triple bottom for induction. 18-10 stainless steel with lid Capacity: 95 ml

0650K

€14.34

Only 0 left

Only 0 left

Out of stock
Fox/Combative Edge - SR11 Plain - FX-CED-M3 coltello

Destinazione d'uso: Tattico / Collezione

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -

7741

€131.15

Out of stock
Fox/Combative Edge - SR11S Serrated - FX-CED-M3S - coltello

Destinazione d'uso: Tattico / Collezione

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -

7741S

€135.25

Out of stock
Fox/Combative Edge - Salus - FX-CED-M2 - coltello

Destinazione d'uso: Tattico/Militare

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: full tang, in acciaio inox N690Co
Trattamento Lama: Ti-Ni
Manicatura: G-10
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 275mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 304g.
Chiusura: -
Clip: -
Fodero: Kydex e Nylon
Confezione: Scatola di cartone con loghi Fox
Note:

7743

€174.18

Out of stock
Inoxpran - Stainless steel creamer Dolcevita 6 cups

Inoxpran - Stainless steel Creamer Dolcevita 6 cups Triple bottom for induction. Stainless steel 18-10.

S1005

€9.02

Only 0 left

Only 0 left

Out of stock