Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

ZOKU's Shark Ice is an amazing addition to any beverage. 
These large ice cubes, shaped like the head of a shark, not only catch the eye but also melt slower than average-sized ice cubes, delaying the dilution of your drink. 
Perfect for cocktails, whiskey, juices and more.
Shark Ice will turn every toast into a stunning experience!

Materials: silicone, polypropylene. BPA and phthalate free

Dimensions: 8.3x9cm

Capacity: 118ml

This individual pop is easy to remove, featuring a stick with built-in drip protection and a small heart hidden in the center of the pop. 
It is part of the Character Pop family, including eight collectible creatures, each representing a unique character for all members of your family.

- Pour cold juice into the molds up to the fill line
- Insert the sticks with drip protection
- Freeze the filled molds for at least 6 hours
- Take out the popsicle

Capacity: 40ml

Dimensions: 8x8x10cm

Shape: Cat

The Zoku Quick Pop Maker allows you to create healthy and fun popsicles in just 7 to 9 minutes without the need for electricity.

How it works:

- Freeze the Quick Pop Maker for 24 hours
- Insert the sticks
- Pour in the juice of your choice

Easy to use: Makes popsicles quickly

Versatile: Suitable for juices, yogurt and other mixtures

Hygienic: BPA-free plastic, easy to clean

Preparation time: 7-9 minutes

Capacity: Up to 6 popsicles before needing to refreeze

Dimensions: 14.6x11.4x12cm

Material: BPA-free plastic.

Package Contents:

1 Quick Pop Maker Duo
4 sticks
4 anti-drip guards
1 Super Tool

Enjoy delicious and personalized popsicles with the Zoku Quick Pop Maker.

The BLACK set contains three sparkling Kala Namak salt stones from India, a unique ingredient that adds a secret touch to your dishes. 
Kala Namak salt stands out for its distinctive flavor, with a slight hint of egg hidden behind spicy and slightly smoky notes, thanks to its high sulfur content.
Ideal for vegan cooking, Kala Namak salt is perfect for dishes such as scrambled tofu, chickpea omelets, and fruit salads. It adds a distinctive flavor that enhances any recipe.
A Unique Touch to Your Dishes
With its sparkling stones and extraordinary flavor, Kala Namak salt from the BLACK set will turn every dish into an unforgettable culinary experience. 
Add this special ingredient to your cooking and discover new flavor possibilities.

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

Enrich your kitchen with these three salt rocks from different parts of the world, perfect for adding variety and inspiration to your dishes. 
Each rock has a unique flavor and can be grated directly onto pots, pans, fish, and meat. 
In addition to being delicious, these salts are beautiful to look at, resembling gemstones, and are an elegant addition to the kitchen and dining table.

Salt Rocks Included in the Set:

Bolivian Rose Salt Rock: This salt is mild and sweet, ideal for everyday cooking. Perfect for meat and vegetable dishes, it adds a refined and flavorful touch.

Cubic Halite Salt Rock: With a natural but rather intense flavor, this salt is perfect for those seeking a robust and assertive taste.

Kala Namak Salt Rock: This salt has a spicy and slightly smoky flavor with a hint of egg due to the high sulfur content, making it unique and intriguing for various culinary preparations.

Rivsalt was born from the mind of designer

Swedish designer Jens Sandriger during a trip to Beijing.

Having dinner at a famous Japanese restaurant in the city, Jens thought: this is really cool!

Before his eyes, the chef had just ground a Himalayan pink salt gem directly onto the guests' plates. That's when the Rivsalt idea was born: a unique dining experience that puts salt truly at the center of the table and the kitchen. From China to Sweden, the Rivsalt family of products soon spread around the world, becoming a must-have for taste enthusiasts.

The elements that make up the Rivsalt family of products are a synthesis of what the Earth offers and what man can skillfully work with.

Untreated oak bases and stainless steel graters highlight natural raw materials that are anything but common and, at times, rare.

Each element in the Rivsalt line fills objects hitherto considered everyday with meaning and value: salt, licorice, pepper, and toothpick become experiences out of the ordinary.

CHILI is about flavor and experience. Just like RIVSALT. So creating the chili product seemed natural to us.

A perfectly shaped grater made of stainless steel, an oak wood stand, and the best selection of chili peppers we could find.

Another Scandinavian gastronomic experience by RIVSALT.

The RIVSALT product range was designed by Swedish entrepreneur and designer Jens Sandringer. RIVSALT is about design, communication, and experience. Grating your own Rivsalt salt and spices simply adds flavor and style to any dining experience. The beautiful design can enhance the dining table. Many of the table accessories are also great communication items. 

RIVSALT products are unique gifts for foodies and home chefs.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

BLUE ROCK SALT is a unique and valuable product, perfect for enriching seafood dishes, salads, French cuisine and truffles. 
This rare salt is distinguished by its initially strong flavor, which evolves into a delicacy characterized by a silky, velvety sweetness.
Blue salt is extracted from a salt mine located in the Middle East. 
Its intriguing blue color is formed during salt crystallization, a process that occurs under intense pressures acting on salt deposits. 
This phenomenon leads to light fracturing through the individual crystals, creating an optical illusion that gives the salt a distinctive, shimmering blue color.

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Discover the RIVSALT refill pack, with three Himalayan pink salt rocks totaling about 150 grams. 
This pure and natural salt, unrefined and without chemical treatment, is rich in minerals, including iron and magnesium.

THERE IS SALT AND SALT

RIVSALT transforms salt into a taste and visual experience with unique salt rocks, each with different shades of pink and white. 

Benefits of Himalayan Pink Salt

• Reduces the risks of hypertension and water retention
• Supports respiratory activity
• Promotes more regular sleep

Himalayan salt gems are pure and pristine, retaining their original quality for millions of years. 
Bring the purity of Himalayan salt to your table with RIVSALT.

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

This individual pop is easy to remove, featuring a stick with built-in drip protection and a small heart hidden in the center of the pop. 
It is part of the Character Pop family, including eight collectible creatures, each representing a unique character for all members of your family.

- Pour cold juice into the molds up to the fill line
- Insert the sticks with drip protection
- Freeze the filled molds for at least 6 hours
- Take out the popsicle

Capacity: 40ml

Size: 8x8x10cm

Shape: Hedgehog

Zoku Ice Ball is a set of ice shapes that allows you to create perfectly round and generously sized ice balls. The set consists of two pieces, each consisting of two half-spheres that come together to form a complete sphere.

The shapes are made of high-quality flexible silicone, which makes it easy and convenient to take out the ice spheres once frozen. Simply fill the hemispheres with water or any other beverage you wish to freeze, join the two parts together, and place the shapes in the freezer. Once the liquid has turned to ice, you can separate the hemispheres and you will get two beautiful ice spheres ready to be used.

Ice balls created with Zoku Ice Ball are perfect for chilling drinks such as whiskey, bourbon, vodka, rum and cocktails. Because of their round shape, they melt more slowly than regular cubic ice, allowing you to enjoy your drink without it diluting too quickly. In addition, ice balls add a touch of elegance and style to your drink.

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

Zoku - Iceberg Ice Mold

Introducing new brilliantly cut Iceberg Ice Molds. Add a twist to “on the rocks” with ice that melts slowly without diluting your drink.

Includes: 2 Ice Molds

Care: Hand Wash 

Top Rack Dishwasher Safe

Capacity: About 3.25 fl. oz. each

Dimensions: 3.7” x 3.7” x 2.83 ”

Weight: 0.22 lbs.

Model: ZK155

BPA and phthalate free.

Black Fighter - 02-1271 - knife
Blade: 1095 Carbon Steel 56 / 58HRC teflon
Handle: Kraton
Blade length: 200 mm.
Total length: 323 mm.
Blade thickness: 3.5 mm.
Length Closed: -
Weight: 350g.
Closed: -
Sheath: hard plastic
Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

It is an essential accessory in the kitchen. Meatbag is suitable for cooking, heating, freezing, thawing or marinating meat and vegetables. Meatbag can also be used to heat food in the microwave, but do not seal the bag.

This accessory comes in two sizes, is approved for use with food, and is made of silicone and rubber. It is dishwasher safe.

Sizes:

Large: 32 x 25 cm

Small: 26 x 18 cm.

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker