Last up date
-
Brainstream - Drip.it+ bottle drainer
Drip.it+ bottle drainer
Length: 37.5cm - 56.5cm (extendable)
Width: 10.5cm
Weight: 358g
Stainless steel insert included
Material: silicone + stainless steel
Inventor: Susanne Richter (SanniShoo)
Cleaning likes to decorate... Everyday life around the sink.
drip.it offers the ideal solution for various ‘draining scenarios’. The stainless steel insert makes it the perfect mobile and easily stowable draining station for almost all types of reusable bottles. Whether glass bottles, modern thermo bottles or baby bottles.
Heat-resistant silicone rings protect the bottles from scratches. Up to three bottles can be drained at the same time with drip.it+. There is also space for bottle caps, brushes, sponges etc. on an extra shelf.
Freshly washed salad or cooked pasta can also be easily drained in the sieve (sieb.up) with the help of drip.it+. -drip.it+ is extendable and therefore fits perfectly on any sink.
This makes it ideal for use as a flexible colander holder for draining washed or cooked food over the sink. Fewer germs on the sink thanks to better drying bottles, dishcloths, sponges and brushes. A simple idea, but a real jack-of-all-trades that can do a lot.
A005883€24.59Only 8 leftOnly 8 left -
Rivsalt - Salt Crystals Refill 150gr - Kala Namak Salt
The BLACK set contains three sparkling Kala Namak salt stones from India, a unique ingredient that adds a secret touch to your dishes.
Kala Namak salt stands out for its distinctive flavor, with a slight hint of egg hidden behind spicy and slightly smoky notes, thanks to its high sulfur content.
Ideal for vegan cooking, Kala Namak salt is perfect for dishes such as scrambled tofu, chickpea omelets, and fruit salads. It adds a distinctive flavor that enhances any recipe.
A Unique Touch to Your Dishes
With its sparkling stones and extraordinary flavor, Kala Namak salt from the BLACK set will turn every dish into an unforgettable culinary experience.
Add this special ingredient to your cooking and discover new flavor possibilities.RIV018€16.39Only 2 leftOnly 2 left
-
Rivsalt - Salt Crystals Refill 150gr - Mixed Salts
Enrich your kitchen with these three salt rocks from different parts of the world, perfect for adding variety and inspiration to your dishes.
Each rock has a unique flavor and can be grated directly onto pots, pans, fish, and meat.
In addition to being delicious, these salts are beautiful to look at, resembling gemstones, and are an elegant addition to the kitchen and dining table.Salt Rocks Included in the Set:
Bolivian Rose Salt Rock: This salt is mild and sweet, ideal for everyday cooking. Perfect for meat and vegetable dishes, it adds a refined and flavorful touch.
Cubic Halite Salt Rock: With a natural but rather intense flavor, this salt is perfect for those seeking a robust and assertive taste.
Kala Namak Salt Rock: This salt has a spicy and slightly smoky flavor with a hint of egg due to the high sulfur content, making it unique and intriguing for various culinary preparations.
RIV032€16.39Only 2 leftOnly 2 left -
Rivsalt - Chili Grater Set - rivsalt chili
Rivsalt was born from the mind of designer
Swedish designer Jens Sandriger during a trip to Beijing.
Having dinner at a famous Japanese restaurant in the city, Jens thought: this is really cool!
Before his eyes, the chef had just ground a Himalayan pink salt gem directly onto the guests' plates. That's when the Rivsalt idea was born: a unique dining experience that puts salt truly at the center of the table and the kitchen. From China to Sweden, the Rivsalt family of products soon spread around the world, becoming a must-have for taste enthusiasts.
The elements that make up the Rivsalt family of products are a synthesis of what the Earth offers and what man can skillfully work with.
Untreated oak bases and stainless steel graters highlight natural raw materials that are anything but common and, at times, rare.
Each element in the Rivsalt line fills objects hitherto considered everyday with meaning and value: salt, licorice, pepper, and toothpick become experiences out of the ordinary.
CHILI is about flavor and experience. Just like RIVSALT. So creating the chili product seemed natural to us.
A perfectly shaped grater made of stainless steel, an oak wood stand, and the best selection of chili peppers we could find.
Another Scandinavian gastronomic experience by RIVSALT.
The RIVSALT product range was designed by Swedish entrepreneur and designer Jens Sandringer. RIVSALT is about design, communication, and experience. Grating your own Rivsalt salt and spices simply adds flavor and style to any dining experience. The beautiful design can enhance the dining table. Many of the table accessories are also great communication items.
RIVSALT products are unique gifts for foodies and home chefs.
RIV-024€28.68Only 1 leftOnly 1 left -
Rivsalt - Ginger &Turmeric Set Grater
GINGER & TURMERIC - PREMIUM SUN DRIED PIECES GINGER & TURMERIC are old best friends from India. Used in many of the same dishes, they complement each other extremely well – like most best friends do. These dried roots belong to the Zingiberaceae family and are said to have remarkable health benefits - possibly even more so together with grated PEPPER. For some extra zing, use the elegant spoon-grater to stir the grated roots into a classic curry, a delicious Caribbean sweet potato soup or your breakfast chia seed pudding. Or why not grate and stir into a fresh cocktail or your favorite smoothie? Works great on top of your morning latte, tea or super-healthy detox shot, too. A true RIVSALT gastronomic experience every time. When not in use, the stainless steel spoon-grater rests gracefully on the carefully carved oakwood stand - making it a beautiful centerpiece on your dining or kitchen table.1561GINGER€24.59Only 2 leftOnly 2 left -
Rivsalt -Freeze & Serve - Himalayan Salt Plates
Rivsalt -Freeze & Serve - Himalayan Salt Plates FREEZE & SERVE includes four himalayan salt plates, which turn any starter or dessert into a RIVSALT gastronomic experience. to use, simply pop the plates into your freezer for a couple of hours and take them out again just before serving. the plates have one flat side; great for starters like sashimi, tartar or salad, and another side with a rounded cavity; perfect for desserts like vanilla ice cream with grated raw LIQUORICE. In Michelin 2-star restaurant, Vila Joya in Albufeira Portugal, FREEZE & SERVE plates are used to exquisitely present butter. How to freeze & serve Freeze the plates for 2-3 hours. Take out just before serving. After using, wipe clean with a sponge using as little water as possible and no detergent. Dry with a kitchen towel. Leave to dry for at least 12 hours before placing back in original packaging. Store in low humidity conditions.RIVFREEZESpecial Price €26.08 Regular Price €28.69Only 1 leftOnly 1 left -
Key-Bar - Accessory Bottle opener and screwdriver titanium - BO
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-CB-CLIP€12.30Only 8 leftOnly 8 left
-
Key-Bar - Prybar and Titanium screwdriver - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-PRY€20.49Only 1 leftOnly 1 leftOut of stock -
Brainstream - BeepEgg Classic - ONE EGG FITS ALL
Brainstream - BeepEgg® Classic - ONE EGG FITS ALL BeepEgg® Classic is a precise egg-timer, which as with any other BeepEgg® will be boiled together with the real eggs. Once yolk and egg-white have reached the desired degree of hardness, BeepEgg® will play three tunes for the different levels of hardness.5943CREGG€7.78Only 4 leftOnly 4 left -
Rivsalt - Salt Crystal Refill 150gr - Persian Blue Salt
BLUE ROCK SALT is a unique and valuable product, perfect for enriching seafood dishes, salads, French cuisine and truffles.
This rare salt is distinguished by its initially strong flavor, which evolves into a delicacy characterized by a silky, velvety sweetness.
Blue salt is extracted from a salt mine located in the Middle East.
Its intriguing blue color is formed during salt crystallization, a process that occurs under intense pressures acting on salt deposits.
This phenomenon leads to light fracturing through the individual crystals, creating an optical illusion that gives the salt a distinctive, shimmering blue color.RIV010€18.03Only 1 leftOnly 1 left -
Rivsalt - Big Grater & Stand for pink salt Himalayano
Rivsalt - grater pink salt Himalayano- Rivsalt is a new way to appreciate a vital and valuable as the salt. It consists of a rose bud pure Himalayan salt, a mini-grater Japanese stainless steel and a cylindrical base of oak untreated. Each bud of Himalayan salt has an irregular shape, different from one another, each grain that is ground is unique: can be pink, like crystal from which it comes, or white, as the striations that characterize it. Rivsalt you take the right of the center of your table, creating a satisfying experience gustatory, tactile and visual.1561BIG€40.16Only 1 leftOnly 1 leftOut of stock -
Rivsalt - Salt Crystal Refill 150gr - Himalayan Pink Salt
Discover the RIVSALT refill pack, with three Himalayan pink salt rocks totaling about 150 grams.
This pure and natural salt, unrefined and without chemical treatment, is rich in minerals, including iron and magnesium.THERE IS SALT AND SALT
RIVSALT transforms salt into a taste and visual experience with unique salt rocks, each with different shades of pink and white.
Benefits of Himalayan Pink Salt
- Reduces the risks of hypertension and water retention
- Supports respiratory activity
- Promotes more regular sleep
Himalayan salt gems are pure and pristine, retaining their original quality for millions of years.
Bring the purity of Himalayan salt to your table with RIVSALT.1561S-RIC€9.84Only 3 leftOnly 3 left -
RIIS - Silicone Meatbag 2 Pieces - Kitchen
It is an essential accessory in the kitchen. Meatbag is suitable for cooking, heating, freezing, thawing or marinating meat and vegetables. Meatbag can also be used to heat food in the microwave, but do not seal the bag.
This accessory comes in two sizes, is approved for use with food, and is made of silicone and rubber. It is dishwasher safe.
Sizes:
Large: 32 x 25 cm
Small: 26 x 18 cm.
1154RSpecial Price €23.69 Regular Price €27.87Only 1 leftOnly 1 left -
Screwpull - Anello salvagoccia - WINE
Anello salvagoccia
Anello salvagoccia non permette ad alcuna goccia di vino di cadere dalla bottiglia e sporcare tavolo o tovaglia.4745€10.66Only 1 leftOnly 1 left -
Brainstream - BeepEgg Classic - ONE EGG FITS ALL
Brainstream - Beep Egg BOILING EGGS THE EASY WAY - [EGG]STREMELY GOOD GIFTS The singing and floating egg-timer guarantees perfectly boiled eggs and lots of fun. BeepEgg is a precise egg-timer, which is boiled together with the real eggs. Once yolk and egg-white have reached the desired degree of hardness, BeepEgg® will play a tune. The inner high t[egg] components of BeepEgg® always work and are “Made in Germany”. This functionality, combined with a certain sense of humour, makes BeepEgg® an ideal gift for numerous occasions. Here is another cool, innovative and fun item that is actually really useful. Do you like your eggs cooked egg-sactly right but have trouble timing them to perfection? The Beep Egg is the solution! The easy way to cook eggs, Beep Egg can sense when the conditions in the pan are just right for an egg to be soft-boiled, medium-cooked or hard-boiled. A temperature sensor detects when the water is boiling and then from that point, a timer will start to count down until the perfect conditions are reached for the ideal egg.Simply put the Beep Egg into the water with your real eggs and cook it in there with them. When the eggs are ready, the Beep Egg will play you a tune! When they are done, you lift the Beep Egg out of the water with your now-perfectly boiled eggs, rinse it off and it is ready to be used next time! The Beep Egg is an ideal gift for anyone who hates cooking but has to boil an egg occasionally, or anyone that loves cooking but has so much on the go at once, they need a little help to keep track of it all! No more morning disappointments - enjoy your eggs exactly as you want them, every time! For those of you with large families with different preferences - use several Egg-Beeps at the same time! The Egg-Beep will play its melody for 3 minutes, or until cooled off using cold water. When not in use, store it in the fridge to keep it at the same temperature as your eggs.5943Special Price €11.80 Regular Price €14.75Only 1 leftOnly 1 left -
Taidea - Sharpening stone 10000 grit - TP7100 - Synthetic stone
Synthetic water stone to sharpen knives and razors of good quality and with an excellent quality / price ratio.
Equipped with non-slip support with liquid collection tray and additional coarse grit abrasive stone for the maintenance and grinding of the main stone. The kit also includes a small pump to keep the stone hydrated and a support to maintain the agulation of the knife during sharpening.
Type: water sharpening stone made of corundumQuality level: Good
Country of production: China
Grain: # 10000
Stone size: about 200x80x20mm
Notes: equipped with non-slip support, containment tank and support base, grinding stone, hydration pump and sharpening guideL417100€61.48Only 0 leftOnly 0 leftOut of stock -
Taidea - Sharpening stone 1000/6000 grit - TP6610 - Synthetic Stone
Synthetic water stone to sharpen knives and razors of good quality and with an excellent quality / price ratio.
Equipped with non-slip support with liquid collection tray and additional coarse grit abrasive stone for the maintenance and grinding of the main stone. The kit also includes a small pump to keep the stone hydrated and a support to maintain the agulation of the knife during sharpening.
Type: water sharpening stone made of corundumQuality level: Good
Country of production: China
Grain: double-face # 6000 and # 1000
Stone size: about 200x80x30mm
Notes: equipped with non-slip support, containment tank and support base, grinding stone, hydration pump and sharpening guideL416610€61.48Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Titanium Cutter Utility Tool - KeyBar accessory
ACCESSORY TO BE USED WITHIN YOUR KEY-BAR
* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA
THE BRAND PHILOSOPHY
The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.
Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.
The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!
No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.
Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.
Patented and entirely made in Savannah, USAKEY-CUT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Screw Extension Kit - KeyBar Accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-EXT€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Clip Deep Carry 2.0 in titanium - KeyBar accessory
Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-DC-CLIP€0.00Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarSQRAL€49.18Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
SLAY-TKB€0.00Only 0 leftOnly 0 leftOut of stock -
BenchMark - Training Bali - BM006 - Training knife
*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***
Intended Use: Training
Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.BE-BM006€40.16Only 0 leftOnly 0 left
Out of stock -
Key-Bar - OD Green G10 - Aluminum Key Holder - G10-ODGRN
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-ODGRN€54.92Out of stock -
Key-Bar - Black G10 - Aluminum Key Holder - G10-BLK
The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.
Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!
Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clipsNo special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
KEY-G10-BLK€54.92Out of stock -
Key-Bar - Black Anodized - Key ring in aluminum with titanium clips - BLK-ANOAL2
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-BLK-ANOAL2€51.64Out of stock -
Key-Bar - White / Black Cerakoated - Aluminum Key Holder - WHTBLK-CKAKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-WHTBLK€65.57Out of stock -
Key-Bar - American Flag Pattern - Titanium Key Holder - STARBAR
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-AM-FLG-TKB€59.84Out of stock -
Key-Bar - Splatter Pattern - Titanium Key Holder - SPLTRKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-SPLTRKB€98.36Out of stock -
Key-Bar - Accessory comb titanium - CO
Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-TCMB€17.21Out of stock -
Key-Bar - Titanium Keychain with titanium clip - TKB
The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.
Your KEY-BAR arrives in a hinged tin and includes:
(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob linkDimensions
Length: 3.5 in
Weight: 1.6 oz
Screw post dimension: .164 in
# of keys the KEY-BAR can hold
Up to 12 with the provided screws
Up to 28 with longer screws, available here
Fits 90% of keys
No special tools are necessary for assembly.
All KEY-BARs are CNC milled from solid billet then hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-TKB€54.92Only 0 leftOnly 0 leftOut of stock -
Key-Bar -Titanium and Carbon keychain with titanium clip - ACFKB
keychain with titanium clip - ACFKBKey-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB
PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
DimensionsLength: 3.5 in
Weight: 1.4 oz
Screw post dimension: .164 in
# Of keys the KEY-BAR can hold
Up to 12 With the provided screws
With up to 28 longer screws, available here
Fits 90% of keys
No special tools are Necessary for assembly.
All KEY-bars are CNC milled from solid billet then a hand finished to order.
Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.
MADE IN THE USA
SAVANNAH, GA
PATENTED
KEY-CFTKB€63.93Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Carbon fiber and aluminum keychain with titanium clip - ACFKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-ACFKB€54.10Only 0 leftOnly 0 leftOut of stock -
Key-Bar - Aluminum Key Ring with titanium clip - AKB
The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.
Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.
The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!
Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.
The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip
No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.
Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.
Patented and manufactured entirely in Savannah, USA
Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-BarKEY-AKB€34.43Only 0 leftOnly 0 leftOut of stock -
Screwpull - Stappa tappo per spumanti in metallo
Stappa tappo per spumanti "Cork Catcher Metal"
Questo nuovo dispositivo di rimozione apre il vostro spumante in tutta la sicurezza ma senza perdere l'eccitamento dello schiocco ...!!!
Istruzioni per l'uso:
- rimuovere la capsula e la gabbietta di metallo dalla bottiglia di champagne o dal vino frizzante
-posizionare stappa tappo Screwpull sul tappo e sul collo della bottiglia e premere a fondo
-impugnare stappa tappo Screwpull in senso antiorario e far uscire il tappo dalla bottiglia!
La presentazione dell' articolo Screwpull in scatola elegante lo rende un regalo indispensabile o anche per soddisfare un proprio desiderio e propria passione.
Caratteristiche tecniche:•Dimensioni: (hxØ)23x4,8cm
4744€34.43Only 0 leftOnly 0 leftOut of stock
