Last up date

Faithful reproduction of the Roman sword produced by Windlass

Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment

Three Pianelle R-TPC20 - knife

Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.

Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle

This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.

Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.

Destination of use: collection

Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)

Weight: 140g.

"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "

The Blacksword fantasy sword features a burnished tempered carbon steel blade.

The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp

Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.

High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.

Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp

Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.

Sword characteristics:

- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch

The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.

The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.

Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -

Reproduction of an Italian dagger of the 14th / 15th century.

The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.

Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.

Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.

Intended use: sports / collection / hunting

Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box

Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.

The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.

Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.

Intended use: Hunting / Sports

Type of production: Semi-Industrial
Lama production: Finland
Blade: in steel D2
Blade treatment: -
Handle: birch root
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpening

Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.

Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -

Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -

*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***

Intended Use: Training

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.

- Battle Sword in a hand 501000 - battle ready

Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch

We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.

Each blade is built to withstand a lot of use by reenactors or stage performers.

Full tang sword forged of high carbon steel 1095, fully tempered.

The edges and points are 3/16" thick and rounded over for better nick resistance.

Wood grips covered with leather and other authentic materials.

All come with scabbards.

Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready

Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch

Museum Replicas Windlass - Gladiator - Tigris Axe 880011

From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.

Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.

Weight: 2014g.
wooden display support

© 2010 DW Studios LLC. All Rights Reserved.

Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.

Guard and pommel are made of steel.

Sheath, including the sword, a leather belt with.

- Overall length: 103cm

- Length of the blade: 86,5cm

- Blade width: 4.8 cm

- Weight: 1260 gr

Museum Replicas Windlass - Sword of Tancred - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.

- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr

Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.

Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios

EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel D2
Treatment Lama: -
Handle: Micarta Green
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: Steel D2
Treatment Lama: -
Handle: Micarta Black Green
Blade length: 80mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Flat

This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft

Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather

È formato da un manico in legno che culmina in una testa. Quest'ultima ha una protuberanza su 5 lati: era in grado di forare una corazza come altre armi dello stesso genere, le mazze. Impugnatura: Legno rinforzato in acciaio
Testa: Acciaio al carbonio
Lunghezza Totale: 680mm.
Lunghezza Martello: 130mm.
Spessore Impugnatura: 30x30mm.
Spessore Testa: 33x33mm.
Peso: 1136g.

Zuava Cattle Polished R-ZVC19 - knife

Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

Palmerino horn cattle PA2C20 two knives - knife

The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.

Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.

Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.