Last up date

Intended Use: Training

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -

Intended Use: Hunting / Utility

Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finish: Satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.1mm.
Total length: 293mm.
Weight: 374g.
Scabbard: leather
Package: cardboard box with Boker logos
Notes: -

The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made from a single piece of folded metal, but from flat plates in steel with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. In this version it is equipped with a frame lock. With lanyard hole.

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: in steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 60g.
Clip: -
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Note: -

The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made of a single piece of folded metal, but of flat plates made of brass with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. It opens with two hands and does not lock. With lanyard hole.

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: brass
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 71g.
Clip: -
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: in 440C stainless steel
Blade treatment: Stonewash
Handle: in steel
Blade length: 76mm.
Blade thickness: 3mm.
Total height of the lung: 176 mm.
Pesos: 67 g.
Clip: removable, in stainless steel
Closure: Slipjoint
Packaging: cardboard box with Boker Plus logos
Note: pinball opening system on ball bearings

The practical Connector of Boker Plus bears the unmistakable signature of the Polish cutler Jakub Wieczorkiewicz, now known all over the world for the quality of his production. The Connector is equipped with a spear point blade, CPM-S-35VN steel, on ball bearings. Made with an excellently machined titanium handle.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN steel
Blade treatment: satin finish
Handle: Titanium
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 88g.
Clip: removable steel
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via ball bearing system - design by Jakub Wieczorkiewicz

The Boker Plus Kazhan is designed by Alexander Krava and is a practical neck knife with a short Sheepfood-shaped blade, practical and light, ideal as a back-up tool. The young cutler from Lviv, Ukraine places particular emphasis on the aesthetics of his models, which convince not only as reliable tools but also as high-quality accessories. The skeletonized Kazhan is made of D2 with a dark stonewash finish. Supplied with chain and custom Kydex sheath.

Intended use: Tactical / CQB

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 56mm.
Blade thickness: 4mm.
Total length: 140mm.
Balancing: -
Weight: 62g.
Sheath: For neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Alexander Krava design

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 78g.
Clip: removable steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

Ilsa - Coffee Maker Carmencita Pop alum. 6 cups - INDUCTION

The first item produced under the ILSA brand is the iconic Neapolitan coffee maker in 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are returning to coffee after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle for use on all hobs

Ilsa - Caffettiera Carmencita Pop aluminium 3 cups - induction

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first item produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of a regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its worldwide recognised Lavazza brand.

Ilsa - Carmencita Pop Aluminium 2 cups coffee maker - induction

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first item produced under the ILSA brand is the iconic Caffettiera Napoletana in 99% pure aluminium, which has become the symbol of a regained wealth on the tables of Italians who are returning to drinking coffee after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its Lavazza brand, recognised throughout the world.

Ilsa - Caffettiera Carmencita Pop aluminium 1 cup

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first article produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war. 

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium, to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on gas, glass-ceramic and electric hobs, perfect for an important gift thanks to its worldwide recognised Lavazza brand.

The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.

Before the moka, which has speeded up the preparation of coffee, the famous black drink was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.

NEAPOLITAN COFFEE POT 6 CUPS IN ALUMINIUM

The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.

The procedure then consists of the following steps:

1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.

2) Screw the filter on top of the tank.

3) Fill the perforated tank with water, always up to the indicated limit.

4) Insert the hollow tank into the perforated tank.

5) Add the body with the cap and screw in.

6) Place on the side with the water tank.

7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.

8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.

The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.

Before the moka, which speeded up the preparation of coffee, the famous black beverage was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.

CAFFETTIERA NAPOLETANA  3 CUPS IN ALUMINIUM

The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.

The procedure then consists of the following steps:

1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.

2) Screw the filter on top of the tank.

3) Fill the perforated tank with water, always up to the indicated limit.

4) Insert the hollow tank into the perforated tank.

5) Add the body with the cap and screw it on.

6) Place on the side with the water tank.

7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.

8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.

The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.

The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: steel and G10
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, removable
Closure: slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total lenght: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper 
Notes: Design by Lucas Burnley - ball bearing flipper opening system

This model originates from Col. Rex Applegate's project the "Boker Smatchet", developed as a large combat knife, also perfect as a multifunctional tool for outdoors.

Starting from that project, Chuck Gedraitis' new Boker Plus Pocket Smatchet combines the design of the famous classic with the advantages of a practical pocket knife.

The sturdy Pocket Smatchet features a VG-10 Spearpoint blade, featuring a durable stonewash finish. The removable thumb pin on the back of the blade allows for ambidextrous opening, while the linerlock reliably locks it in place. The sturdy clip is milled from solid and also features the characteristic indentations of the classic Smatchet. With lanyard hole and high quality nylon case for storage.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: stonewash
Handle: in micarta
Blade length: 95mm.
Blade thickness: 3.9mm.
Weight: 207gr.
Total length: 235mm.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Note: design by Chuck Gedrait

The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.

Intended use: Collection

Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Burnley

Perfect oil for the care of your knives knives. It can be used precisely, by correctly dosing the amount of oil to be used thanks to the extra long and fine tip. It is absolutely odorless and silicone free. Physiologically harmless according to DAB and LFGB and even approved for food (USDA and FDA).

Capacity: 12ml

Dimensions: 155mm x 18mm

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 58mm.
Blade thickness: 4.7mm.
Total length: 160mm.
Weight: 93g.
Sheath: in Kydex
Packaging: cardboard box with Boker Plus logos
Notes: Design by Dirk Hofmeister - reversible clip integrated into the knife

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: SK-5 steel ful tang
Blade finish: Black PVD
Handle: Micarta
Blade length: 104mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 200g.
Sheath: in Kydex with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: design by James Helm

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Carbon Fiber, Titanium
Blade length: 84mm.
Blade thickness: 3.5mm.
Total length: 192mm.
Weight: 148g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Steve Kelly

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 1.9mm.
Total length: 155mm.
Weight: 54g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin
Handle: in G10 Blue / gray
Blade length: 702mm.
Blade thickness: 3mm.
Total length: 170mm.
Weight: 93g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearings - designed by Sam Abdelrahman

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: stonewash
Handle: in G10
Blade length: 89mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 148g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearings

Intended use: EDC / Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel damascus
Blade treatment: satin finish
Handle: titanium
Blade length: 72mm.
Blade thickness: 2.1mm.
Total length: 176mm.
Weight: 56g.
Clip: removable, in titanium
Closure: -
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel damascus
Blade treatment: satin finish
Handle: titanium
Blade length: 86mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 42g.
Clip: titanium
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Intended use: Gentleman / Sportsman

Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel damascus
Blade treatment: satin finish
Handle: titanium frame with cocobolo grips
Blade length: 88mm.
Blade thickness: 2.5mm.
Total length: 195mm.
Weight: 54g.
Clip: titanium
Closure: Liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker

In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design with a gas-pressure magazine with a swivel-head breech, the consistent use of stamped plates that could be produced quickly and cheaply, and the adherence to a class of cartridges introduced by the Wehrmacht with the StG 44 with an average performance between machine gun and rifle ammunition set the trend to this day. These characteristics have made the Kalashnikov system the most built and replicated weapon in history, with an estimated 100 million manufactured worldwide.

Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as cutting weapons, to a short, mountable knife with insulated shears and a multifunctional rear saw.

Mikhail Kalashnikov personally visited the Boker manufacture in Solingen in 2002 and officially introduced the Boker Kalashnikov knife line to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honor its brilliant engineering achievement. The Boker Kalashnikov Bayonet Damascus features a unique Damascus steel blade, made from 6Ch3 and 6Ch4 bayonet steel according to the GRAU index of the former Soviet Army and decorated with General Kalashnikov's signature. The stainless Damascus, handcrafted by Chad Nichols, has 80 layers and is hand forged in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process.

The handle is CNC machined from a block of 6061-T6 aluminum and then black anodized. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the wood in the stock of the famous assault rifle, and together they form the shape of the characteristic vents on the fore-end. The Russian amber shellac color of the original stocks has been accurately reproduced. They are also CNC milled from solid and inserted by hand. All screws and clip are also black anodized. Made in the Boker knife factory in Solingen, it is delivered with transparent floating display, certificate of authenticity and individual serial number.

Intended Use: Collection

Type of production: Semi - Industrial
Country of Production: Germany - Solingen
Blade: 80 ply stainless damask steel, handcrafted by Chad Nichols, from former Soviet Army 6Ch3 and 6Ch4 bayonets
Handle: aluminum 6061-T6 and hornbeam wood
Blade length: 96mm.
Blade thickness: 3.8mm.
Total length: 228mm.
Weight: 158g.
Clip: removable, PVD stainless steel.
Closure: Liner Lock
Package: PVC expositive case that let the knife "float" inside, making it visible from every side
Notes: Certificate of Guarantee - Grey cotton case - Numbered piece on the blade

Intended Use: Outdoor / Light Utility

Production type: Industrial
Country of Production: China
Blade: D2 steel ful tang
Blade finish: Stonewashed
Handle: Micarta with copper rivets
Blade length: 70mm.
Blade thickness: 2.9mm.
Total length: 155mm.
Weight: 85g.
Sheath: leather
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnaes.

Intended Use: Sporting / EDC

Production type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Handle: wood (zebrawood)
Blade length: 71mm.
Blade thickness: 2,3mm.
Total length: 167mm.
Blade lock: SlipJoint
Weight: 42g.
Clip: absent
Packaging: cardboard box with Boker Plus logos
Notes: Tungsten carbide glass breaker on the back side

Intended Use: EDC/Gentleman

Production type: Industrial
Country of Production: Germany - Solingen
Blade: Stainless steel M390 61HRC
Blade treatment: stonewashed
Handle: micarta
Blade length: 78mm.
Blade thickness: 3.0mm.
Total lenght: 185mm.
Weight: 71g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: - 
Package: Cardboard box with Boker logos
Notes: Design by Raphaël Durand

Designation of use: Utility

Production type: Industrial
Country of Production: China
Blade: ful tang in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 215mm.
Weight: 181g.
Scabbard: Kydex, with Tek-Lok type fitting
Packaging: Cardboard box with Boker Plus logos.
Notes: Design by Midgards Messer

Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: satin finish
Handle: G10
Blade length: 72mm.
Blade thickness: 2.1mm.
Total length: 176mm.
Weight: 51g.
Clip: removable, steel
Locking mechanism: -
Package: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Intended Use: EDC/Gentleman

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: Satin finish 
Handle: G10
Blade length: 67mm.
Blade thickness: 2.7mm.
Total lenght: 150mm.
Weight: 33g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: - 
Package: Cardboard box with Boker logos
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 2.5mm.
Total length: 183mm.
Weight: 60g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper 
Notes: Design by Lucas Burnley - ball bearing flipper opening system

Destinazione d'uso: Sportivo / Collezione

Tipo di produzione: Industriale
Paese di produzione: Taiwan
Lama: in acciaio inox VG-10
Trattamento lama: satinatura
Manicatura: in fibra di carbonio con cartella interna in acciaio inox
Lunghezza lama: 82mm.
Spessore lama: 3.4mm.
Lunghezza totale: 182mm.
Peso: 58g.
Clip: in acciaio inox
Chiusura: liner lock
Confezione: scatola di cartone con loghi Boker Plus, astuccio in nylon con zip
Note: Design by Chuck Gedraitis

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: titanium and carbon fiber marbled
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 183mm.
Weight: 75g.
Clip: stainless steel
Closure: frame lock
Package: cardboard box with Boker Plus logos, nylon pouch with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper 
Notes: Design by Lucas Burnley - ball bearing flipper opening system

The stunning Boker M4 Sherman-Damascus is a living piece of history and combines high quality craftsmanship with historical materials. The American M4 Sherman was designed in 1940 and is considered to be one of the most famous tanks in history. It was produced between 1942 and 1945, remained in service until 1957 and was used on all battlefields of World War II - not only by the United States and Canada, but also by Britain, by French forces. , from China and even the Soviet Union.

The Boker Sherman-Damascus features a unique 80-ply Damascus blade, forged with materials sourced from the production of the M4 Sherman tanks, previously restored by the museum. The unique damask is hand-forged for Boker by Chad Nichols and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade fits into a solid steel frame block.

The overall shape of the knife is a tribute to the aesthetic lines of the tank, while the decorative screw of the blade axis is modeled on the characteristic main transmission pinion. The slightly contoured canvas micarta handle fits comfortably in the hand and the color is reminiscent of the camouflage paint used by both the United States Army and Marine Corps.

Sold with transparent display and with certificates of authenticity and individual serial number.

A portion of the proceeds from each knife sold goes to the Americans at the Wartime Museum to support educational programs and the care and preservation of these proud examples of American history. The Americans in the Wartime Museum is a nonprofit cultural and educational institution dedicated to honoring those who have served in all branches of the U.S. military and on the home front from World War I to the present.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: 80-layer stainless steel damascus, from parts of the M4 Sherman
Handle: in steel and micarta
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 107g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Warranty Certificate - Gray cotton case - Numbered copy on the handle

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S-35VN stainless steel
Blade treatment: stonewash
Handle: steel liners and titanium grips
Blade length: 54mm.
Blade thickness: 3.2mm.
Total length: 138mm.
Weight: 91g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - IKBS opening system on ball bearings

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Satin
Handle: Micarta and Steel
Blade length: 85mm.
Blade thickness: 3.9mm.
Closed length: 117mm.
Total length: 202mm.
Weight: 153g.
Clip: in stainless steel, with yellow anodization
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Jesper Voxnaes

Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, titanium, removable
Closure: FrameLock with removable stainless steel clapper
Package: nylon pouch with zipper - cardboard box with Boker Plus logos
Notes: opening through Carson Flipper system on ball bearings

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 61mm.
Blade thickness: 2.7mm.
Total length: 200mm.
Weight: 61g.
Clip: monolithic, titanium, removable
Closure: liner lock
Package: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 54g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kansei Matsuno

Pietra sintetica, ad acqua, per affilare. Doppia grana (3000 e 8000),  dotata di supporto in gomma antiscivolo.

Dimensioni:
lunghezza 180 x larghezza 60 x altezza 30 mm - Peso: 456g.

Livello qualitativo: molto buono

Synthetic stone, water, for sharpening. Double grain (2000 and 5000), equipped with non-slip rubber support.

Dimensions:
length 180 x width 60 x height 30 mm - Weight: 490g.

Quality level: very good

Synthetic stone, water, for sharpening. Double grain (600 and 1500), equipped with non-slip rubber support.

Dimensions:
length 180 x width 60 x height 30 mm - Weight: 574g.

Quality level: very good

Intended use: EDC

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8
Blade treatment: satin
Handle: Zytel and Steel
Blade length: 41mm.
Blade thickness: 2 mm.
Overall length: 102mm.
Weight: 42g.
Clips: stainless steel
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Chad Los Banos

Intended use: EDC / neck

Type of production: Industrial
Production Country: Taiwan
Blade: 440C Stainless Steel
Blade treatment: satin
Handle: Titanium
Blade length: 43mm.
Blade thickness: 1.7mm.
Overall length: 96mm.
Weight: 24g.
Clip: -
Closure: button magnetic lock; blocks both in opening and closing
Packaging: cardboard box with Boker Plus logos
Notes: Design by John Kubasek - supplied with chain from the neck

Type of production: Industrial
Country of production: China
Blade: Swedish Sandvik 12C27 steel, with Rockwell hardness of 58-60 HRC
Handle: in steel
Blade length: 68mm.
Blade thickness: 2.5mm.
Total length: 166mm.
Weight: 90g.
Clip: in steel
Packaging: cardboard box
Note:

Tools present:

- scissors
- clip
- main blade

With the Boker Camp Knife, one of the forefathers of all modern multi-purpose pocket knives, our history began in the year 1869. After almost 150 years of successful market presence, the time came to convert this proven concept into a modern knife. The modernized construction, which is based on solid steel liners, is embedded in two contoured handle scales, made out of black G-10. The Swedish Sandvik 12C27 steel, with a Rockwell hardness of 58-60 HRC, provides outstanding edge retention of the hollow ground blade. The high quality manufacturing, with a smooth blade action and optimized operability, are proof of the premium quality of our Boker Plus Tech Tools.

Glass breaker
flat screwdriver with cap lifter and wire stripper
small serrated blade with flat screwdriver
cork screw
lanyard hole
clip

The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world. Before the moka, which speeded up the preparation of coffee, the famous black drink was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.

CAFFETTIERA NAPOLETANA 1 CUP IN ALUMINIUM

The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.

The procedure then consists of the following steps:

1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.

2) Screw the filter on top of the tank.

3) Fill the perforated tank with water, always up to the indicated limit.

4) Insert the hollow tank into the perforated tank.

5) Add the body with the cap and screw it on.

6) Place on the side with the water tank.

7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.

8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.

The "Gusto Wood" Universal Knife Block is made entirely of solid black wood and has a universal polymer insert that won't scratch the blades and offers useful space for up to six kitchen knives or other utensils as desired. 

The handy insert is removable and water-repellent, so the block can be easily cleaned and sanitized. The block's non-slip plastic feet ensure secure footing on the countertop or in the kitchen.

Country of Production: China
Knife Block Material: Wood
Inside Material: Scratch Resistant Polymers
Non-slip Feet: Polymers
Total Height: 268mm.
Total Width: 104mm.
Depth: 215mm.
Notes: Universal internal compartment, suitable to accommodate up to a maximum of 6 kitchen knives or other kitchen utensils

Chad Banos' practical Bo Plus Subcom can definitely be described as one of the leaders of Boker Plus today.

The enormous value of utility in everyday life and the space-saving design have become legendary. The continued popularity of the versatile pocket knife has now prompted us to relaunch this ultra-compact classic in our range in a modernized version.

The Böker Plus Subcom 2.0 is equipped with a short D2 blade with black coating.

It opens using the thumb pins on both sides and locked in place firmly by the 2mm steel plate of the frame lock. A pronounced hand protection increases grip comfort and glide in the blade.

The structured handle in black Zytel has three-dimensional grooves and thanks to this surface structure, the ergonomic shape and the ribs in the thumb rest area, it always stays firmly in the hand, even when wet. With lanyard hole and reversible clip

Intended use: Sports

Blade: D2 steel 58/60 hours
Handle: stainless steel and Zytel
Blade length: 55mm.
Blade thickness: 2mm.
Closed length: 68mm.
Total height of the lung: 117 mm.
Balance: -
Pesos: 69 g.
Closure: frame lock
Clip: removable and reversible in stainless steel
Sheath: -
Grade: -

Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: stainless steel 420
Treatment Lama: -
Handle material: Leather Brown
Blade length: 12mm.
Blade thickness: 6mm.
Length closed: -
Total length: 2300mm.
Thick when closed: -
Balance: -
Weight: 194g.
Closing: -
Clip: -
Sheath: Leather Brown
Packaging: Cardboard box with logos Boker Plus
Notes: -