Last up date

Othello Solingen Germany by Anton Wingen JR - famous brand in the 80s and 90s

Intended Use: Hunting

Type of production: handcrafted
Blade: 440 steel
Country of manufacture: Germany
Handle: deer
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 235mm.
Weight: 210g.
Sheath: Leather
Notes: 1980s vintage knife discontinued 

AdHoc - COOKING CULTURE

serving set From kitchen accessories to design items, the AdHoc range offers everything you need. Good taste is a necessity not only when cooking, but also when preparing and serving meals.

A perfect match for the COOKING CULTURE series of designer serving sets. The hallmark of the series is a fascinating combination of stainless steel and oiled ash wood. The functionality of the custom-made utensils is also exceptional, all 3 sets consist of 2 pieces:

1.RISOTTO SET : high-quality stainless steel cheese grater ash wood hearing rissotto spoon After use, the spoon slips into the grater brushed stainless steel / oiled ash wood

2.PASTA SET: high-quality stainless steel pasta ladle ash wood spoon after use, the spoon slides into the ladle brushed stainless steel/oiled ash wood

3. WOK SET: high quality stainless steel spoon oiled ash wood tongs after use, the tongs slide into the spoon brushed stainless steel/oiled ash wood

All sets fit into each other - which is convenient, saves space and shows the holistic approach to design. The best ingredients and the best tools for extraordinary taste - that's pure 'Cooking Culture'!

SCANPAN Maitre D' is an elegant series of miniature copper saucepans that combines modern design with classic French elegance.

Copper provides a quick and even heat distribution, and the series is manufactured with an internal stainless steel for optimum cleaning.

SCANPAN Maitre D 'pots have stainless steel handles that are attached with rivets and therefore remain cold longer.

The small portion pots are useful for delicate dishes, sauces, melted butter or chocolate to name a few - or use it directly on the table for serving meals.

Timeless and stylish design

For cooking, baking and serving

Efficient multi-layer construction

Aluminium core for excellent heat distribution 18/10 stainless steel inside for maximum durability

The copper exterior and steel handle give an exclusive look

ScanPan - Mini Paella Pan - Maitre D' 16cm

The copper miniature paella pan features a polished copper exterior and 18/10 stainless-steel interior for rapid, uniform heating.

Can be used to cook on your hob or oven and looks cool placed direct on the table.

Let your dinner imagination run wild.

Size :16cm

Height :5.3 cm

Base diameter :10.4 cm

Weight: 0.44 kg

Ovenproof up to : 260°C.

Pulltex - Pulltap's Constalation Corkscrew

The Pulltap’s Classic Crystal corkscrew double lever has revolutionized the uncorking of the wine. It allows pulling corks out effortlessly in two steps without breaking or damaging them.

Decorated with Crystals from Swarovski® crystals for a more elegant finishing.

 Pulltex is the most important brand of wine accessories that provides a wide range of corkscrews and other accessories for professional wine lovers. With more than 20 years of experience in this field, now it occupies first place in the market. The corkscrew of Pulltex are protected with more than 20 international patents especially the patent for the original double lever corkscrew, as well as the double lever and retractable. These patents are a revolution for all the waiters  Pulltex brand is on the market with a smaller number of wine accessories and with the idea of ​​offering a better and easier.

After the first lever corkscrew, and 'was launched on the market PULLTAP'S who reinvented a whole new way to uncork a bottle of wine, the patent has been around the international market  Currently, Pulltex is a brand well-placed on the market, offering a full range of accessories designed for all times used to serve wine. Pulltex is and stands for innovation, design, the 'originality, functionality and most importantly, the quality of its products.

The brand new Pulltex Bottle Cooler Pot Cooler is an ideal accessory for the service of white and sparkling wines. Light, practical and resistant, the Bottle Cooler Cooler Pot is a plastic cooler with a removable and gel-freezable freezer gel inside. In this way it is possible to keep the bottle at temperature without the use of ice, moreover the Bottle Cooler Cooler Pot takes up much less space than a traditional ice bucket.

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9377/19 Grafting - Grafting

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 75mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 185mm.
Weight: 42g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.
Send feedback
History
Saved
Community

The Stunning Copper and Stainless Steel Collection SCANPAN's Maitre D' series is a beautiful assortment of copper and stainless steel that combines French elegance with timeless design.

The multi-layer construction of Maitre D' guarantees a quick and even heat distribution, and excellent temperature control - whether sautéing vegetables, melting chocolate or making sauces.

Dimension: Top

Diameter: 14cm

Base Diameter: 11.8cm

Capacity 900ml

Outside mirror polished high quality copper Inside mirror polished 18/10 stainless steel for maximum durability

Rapid heat distribution

Cast stainless steel handles - stays cool longer.

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The new COMPACT EVOLUTION electronic corkscrew is the smallest and most manageable option on the market, probably the best electric corkscrew available. It also has a capsule cutter attached to the base. It incorporates a fast-charging lithium battery with a USB type C charger. A modern and elegant corkscrew that simplifies the opening of the wine to anyone in 6 seconds. 

Compact design 

USB C charging connection 

Top quality materials 

Easy to use 

Long-lasting rechargeable battery

DIMENSION:

Height : 187 mm

Diameter: 43 mm

Net Weight: 240 g.

Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.

Intended Use: Hunting / Sporting

Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420 satinato
Paese di produzione: Italia - Maniago
Manicatura: ABS
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 50g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: -

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

Anno di produzione: Anni '90

Tipo di produzione: industriale
Lama: in acciaio inox 420
Paese di produzione: Italia - Maniago
Manicatura: osso di giraffa colorato
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Peso: 84g.
Chiusura: Back Lock
Clip: -
Fodero: -
Note: l'articolo inviato potrebbe differire leggermente per colorazione e sfumature rispetto a quello presente in foto

The smell of freshly ground coffee beans - simply wonderful!

The fragrance of freshly ground coffee beans – simply wonderful! And the invigorating specialities that confident coffee aficionados make out of them are even more delicious... AdHoc developed the MRS. BEAN coffee grinder so that grinding your favourite varieties is effortless. It works manually using an energy-efficient crank handle but otherwise has nothing to do with great-grandma’s old-fashioned hand grinder with its totally modern and very stylish look in elegant stainless steel and acrylic design. MRS. BEAN is equipped with a high-performance CeraCutXL® grinder that preserves the flavour and produces large amounts. With the help of the six PRECISE+® grinding settings on the outside, results can be achieved from powder fine to coarse according to your preference and depending on which preparation method you are going to use. The grinder container holds approx. 50 grams of coffee beans. The collection container is designed for approx. 25 grams (on setting 2) of coffee powder and can easily removed by unscrewing. As a result, you can enjoy technical features with MRS. BEAN that makes grinding coffee beans a real pleasure.

And the invigorating specialties that convinced coffee lovers prepare from them are even more delicious...

Adhoc has developed the MRS BEAN coffee grinder

so that grinding your favorite varieties is easy.

It works manually using an energy-saving hand crank, but is otherwise nothing like great-grandma's old hand mill, but with its sleek design of stainless steel and acacia wood it is thoroughly modern and very stylish. Ms. BEAN features the CeraCutXL ® high-performance coffee grinder for aroma-preserving grinding and high yield. With the help of the 6-fold PRECISE+ ® external grinding degree setting, results can be achieved at will, from powdery to coarse, depending on your preferred brewing method.

Filling is done by simply pulling out the grinding crank.

The grounds container holds about 50 grams of coffee beans.

After grinding, fresh ground coffee falls into the grounds container, which is designed for about 25 grams of ground coffee (with a grind of 2).

This amount is sufficient for up to 4 cups of coffee.

The collection container is easily removable; it is unscrewed by simply rotating it.

Approximate dimensions: diameter - 6 cm,

diameter with handle:14.6 cm,

height:21.8 cm.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Pulltex - SET PULLTAP'S CLASSIC - Sommelier Set 2

Pieces Beautiful wooden box containing 2 well-kept Pulltex accessories of unparalleled quality consisting of:

- double lever corkscrew mod. PULLTAP'S

- Wine thermometer in brushed steel;

The Pulltex® PULLTAP'S model corkscrew continues to be a true "classic" of its kind. Its double lever system (protected by an international license) which allows you to extract the cork in two clicks without bending or breaking it, quickly and easily, ensures the corkscrew a guarantee and unparalleled quality. The proposed version is made entirely of steel finished with a galvanic bath. Silver Plated.

The Thermometer is made of stainless steel (subjected to numerical control) and a glass rod. Its shape and design make it perfectly adaptable to any type of bottle. Part of the best of Pulltex production in this elegant wooden gift box with metal sheet cover and magnetic locking lock.

Ahti Finland - Kaira 72 - knife

Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended Use: Hunting / Sports

Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti

Ahti Finland - Finnman 95-14401 - knife

Knife made in the Finnish city Kauhava.

Intended Use: Hunting / Sports / Fishing

Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahti

Pulltex - Drip for decanter - wine

Pulltex is the most important brand of wine accessories that provides a wide range of corkscrews and other accessories for professional wine lovers. With more than 20 years of experience in this field, now it occupies first place in the market. The corkscrew of Pulltex are protected with more than 20 international patents especially the patent for the original double lever corkscrew, as well as the double lever and retractable. These patents are a revolution for all the waiters  Pulltex brand is on the market with a smaller number of wine accessories and with the idea of ​​offering a better and easier. After the first lever corkscrew, and 'was launched on the market PULLTAP'S who reinvented a whole new way to uncork a bottle of wine, the patent has been around the international market

 Currently, Pulltex is a brand well-placed on the market, offering a full range of accessories designed for all times used to serve wine. Pulltex is and stands for innovation, design, the 'originality, functionality and most importantly, the quality of its products.

Pulltex - Drip for decanter - wine

Easy to use is a practice range in felt to be applied to the neck of any decanter thanks to the possibility to be adjustable. 

In stylish modern Transparent Plastic Gift Box

Pulltex - Pulltap's Toledo Evolution Corkscrew  Rosewood Handle

Pulltex was founded in 1985. After an initial period of "experimental" development, the company grew to focus on and specialize in wine accessories.

In 1994, the inventor of Pulltap's corkscrew joined the company, which brought new impetus to the development of Pulltex, which opened up to new areas of interest and brought corkscrew sales to many new markets. Pulltex's goal is to always increase business to provide the best response to the growing demand of the specific segment of wine accessories.

The Toledo double lever corkscrew has revolutionized the way bottles are uncorked. It enables effortless two-stage cork pulling without breaking or damaging the cork.

Hand-finished with natural wood inserts.

The Toledo double lever corkscrew has revolutionized the way bottles are uncorked. It allows effortless two-stage cork pulling without breaking or damaging the cork. Hand-finished with natural wood inserts. The package contains the leather corkscrew case.

Othello Solingen Germany by Anton Wingen - Bowie Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: craft
Blade: stainless steel 440
Production Blade: Germany
Handle: deer
Blade length: 160mm.
Blade Thickness: 6mm.
Length closed: -
Overall length: 295mm.
Balancing: -
Weight: 374g.
Closure: -
Clip: -
Sheath: Leather
Notes: vintage knives

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Microtech DOC Black - Death on Contact - Flipper Knife - Knife

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony Marfione

Othello Solingen Germany by Anton Wingen - Original Trapper - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle: Wood
Blade length: 12mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 235mm.
Balance: -
Weight: 162g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives.

Othello Solingen Germany by Anton Wingen - Safari 4412 Hunting Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle: Wood
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 235mm.
Balance: -
Weight: 210g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - 4039 design by AG Russell - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 78mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 205mm.
Balance: -
Weight: 136g.
Closing: -
Clip: -
Sheath: Leather
Notes: design by A.G. Russell knives vintage

Othello Solingen Germany by Anton Wingen - Mackenzie 4094 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 226mm.
Balance: -
Weight: 192g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 4082 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 140mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 268mm.
Balance: -
Weight: 242g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 14281 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 110mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 240mm.
Balance: -
Weight: 182g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 4080 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Overall Length: 220mm.
Balance: -
Weight: 154g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany - Gesch 4079 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 85mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 205mm.
Balance: -
Weight: 180g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Pulltex - Europull Corkscrew

Europull corkscrew is ideal for spectacular and glamorous events.

Its unique uncorking method is exciting to look at and guarantees an unforgettable experience for your guests.

The symbolic meaning of love knife, so you call the knife produced specifically to be exchanged between engaged, is twofold: - given to man symbolizes the incitement to the courage, virility, to prevail in the social context - given the woman takes the significance of accepting the commitment to defend their honor and the faith given to the blood. For both finally assume the archaic ritual significance to sanction the signing of a contract not yet institutionalized.

The handle is decorated with classic "dice eyes" that are meant to turn the knife in a valuable amulet against the evil eye. After marriage these knives were usually hung on the wall above the bed.

Blade: Stainless Steel 420
Handle: white deer with .925 silver and onyx stones set
Blade length: 105m.
Blade Thickness: 25mm.
Closed Length: 134mm
Overall length: 240mm.
Weight: 102g.

Finland Ahti - Tikka 62 - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Metsa 95 - Knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Field Dressing 80 - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Vaara - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Leuku 180 - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives