Last up date

Old Bear ™ is the new and exclusive line of pocket knives produced by the Antonini firm from Maniago. This series is characterized by simple and ergonomic shapes, celebrates the 90th anniversary of the company foundation (1925-2015) and is realized by engaging traditional production techniques with a high degree of manual skill.

9377/19 Grafting - Grafting

Type of production: artisan seeds
Lama production: Italy
Blade: Aisi 420 tempered stainless steel - HRC 54/56
Handle: in walnut wood
Blade length: 75mm.
Blade thickness: 2mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 185mm.
Weight: 42g.
Closure: viro block

The handles are made of antique walnut and oiled wood, while the blade made of stainless steel is sharpened and picked up by hand on the stone by skilled artisan hands.
Being a model without a return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring with a special locking device (covered by patent n.1187282 deposited again in 1985 by the Todesco company of Maniago which is an active partner of this project) that can be activated both in the open position and in the closed position.
Send feedback
History
Saved
Community

The Stunning Copper and Stainless Steel Collection SCANPAN's Maitre D' series is a beautiful assortment of copper and stainless steel that combines French elegance with timeless design.

The multi-layer construction of Maitre D' guarantees a quick and even heat distribution, and excellent temperature control - whether sautéing vegetables, melting chocolate or making sauces.

Dimension: Top

Diameter: 14cm

Base Diameter: 11.8cm

Capacity 900ml

Outside mirror polished high quality copper Inside mirror polished 18/10 stainless steel for maximum durability

Rapid heat distribution

Cast stainless steel handles - stays cool longer.

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.

Intended Use: Hunting / Sporting

Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Ahti Finland - Kaira 72 - knife

Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended Use: Hunting / Sports

Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti

Ahti Finland - Finnman 95-14401 - knife

Knife made in the Finnish city Kauhava.

Intended Use: Hunting / Sports / Fishing

Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahti

Othello Solingen Germany by Anton Wingen - Bowie Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: craft
Blade: stainless steel 440
Production Blade: Germany
Handle: deer
Blade length: 160mm.
Blade Thickness: 6mm.
Length closed: -
Overall length: 295mm.
Balancing: -
Weight: 374g.
Closure: -
Clip: -
Sheath: Leather
Notes: vintage knives

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione

Microtech DOC Black - Death on Contact - Flipper Knife - Knife

Intended use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony Marfione

Othello Solingen Germany by Anton Wingen - Original Trapper - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle: Wood
Blade length: 12mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 235mm.
Balance: -
Weight: 162g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives.

Othello Solingen Germany by Anton Wingen - Safari 4412 Hunting Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle: Wood
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 235mm.
Balance: -
Weight: 210g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - 4039 design by AG Russell - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 78mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 205mm.
Balance: -
Weight: 136g.
Closing: -
Clip: -
Sheath: Leather
Notes: design by A.G. Russell knives vintage

Othello Solingen Germany by Anton Wingen - Mackenzie 4094 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 226mm.
Balance: -
Weight: 192g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 4082 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 140mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 268mm.
Balance: -
Weight: 242g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 14281 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 110mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 240mm.
Balance: -
Weight: 182g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany by Anton Wingen - Gesch 4080 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -
Overall Length: 220mm.
Balance: -
Weight: 154g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

Othello Solingen Germany - Gesch 4079 - knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: handmade
Blade: stainless steel 440
Production Blade: Germany
Handle material: Wood and Brass
Blade length: 85mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 205mm.
Balance: -
Weight: 180g.
Closing: -
Clip: -
Sheath: Leather
Notes: vintage knives

The symbolic meaning of love knife, so you call the knife produced specifically to be exchanged between engaged, is twofold: - given to man symbolizes the incitement to the courage, virility, to prevail in the social context - given the woman takes the significance of accepting the commitment to defend their honor and the faith given to the blood. For both finally assume the archaic ritual significance to sanction the signing of a contract not yet institutionalized.

The handle is decorated with classic "dice eyes" that are meant to turn the knife in a valuable amulet against the evil eye. After marriage these knives were usually hung on the wall above the bed.

Blade: Stainless Steel 420
Handle: white deer with .925 silver and onyx stones set
Blade length: 105m.
Blade Thickness: 25mm.
Closed Length: 134mm
Overall length: 240mm.
Weight: 102g.

Finland Ahti - Tikka 62 - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Metsa 95 - Knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Field Dressing 80 - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Vaara - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Leuku 180 - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Leuku 145 - knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

Finland Ahti - Leuku 90 - Knife

Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.

Intended use: Hunting / Sporting

Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray from defense to Caspicum

Dimensions and weight: 11cm long and 1.6cm in diameter, 44 gr. (including insert, ring excluded)

Legality 'PRODUCT CERTIFICATION AND MINISTERIAL:
This product has been certified by the Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

*** WARNING: AN ORDER WITH THIS ARTICLE IS NOT PAYABLE WITH PAYPAL ***

Spray anti-aggression based on Caspicum (chilli)

Dimensions and weight: 16.5cm long and 1.8cm in diameter.

ATTENTION: no longer available with the traditional Street Defender recharge. Using an adapter, use the Key Defender recharge: net weight of contents gr. 4, approx. 6 half-second emissions, effective range 1-2 m.

Legality 'PRODUCT CERTIFICATION AND ITALIAN MINISTERIAL:
This product has been certified by the Italian Ministry of the Interior, Scientific Police Service Aut. Min. # 559 / C-50047-E-98 of 25/06/98 as unfit to cause offense to the person then free purchase and free detention as It does not contain any kind of aggressive chemicals (Law 496/95). For more information please consult the website of the State Police at the following link: http://poliziadistato.it/faq/1623

Please check your country laws.

Advantages and Applications:
Effective against both men against animals;
Approved for use in enclosed areas;
Effective against subjects under the influence of drugs or alcohol;
Cast more precisely and selectively;
Secure against accidental activation;
NO permanent damage on infected persons.

Effects:
Time of reaction to contamination 1/3 seconds
Involuntary closing of the eyes;
Inflammation of the eyes, nose and throat;
Burning sensation on the contaminated parts;
Disorientation of the contaminated subject;
Loss of will to fight;
Inability - 30 to 45 minutes.

The simplicity of DROP STOP solves one of the most annoying inconveniences of pouring wine.
By rolling up the diskette and inserting it into the neck of the bottle, the thin wire of DROP STOP will perfectly cut the drop, so it won't soil the tablecloth.
Effective and 100 percent reusable Drop Stop is made of aluminum coated with food-grade PVC and therefore does not alter the taste of the wine.
Now the new drop stop also becomes an aerator,the wine can also breathe, in fact it oxygenates the wine releasing the aromas and enhancing the taste and allows it to be served without spilling drops.
The package includes 2 drop stops.

I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.

Destinazione d'uso: tattico / collezione

Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -

I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.

Destinazione d'uso: tattico / collezione

Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -

Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.

Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes

Microtech - SF M / A Stone Washed - knife

Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stone Washed
Handle: Aluminium 6061T6 Aviation and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 140mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 145g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with Microtech logos
Notes: Awarded to Blade Awards 2011 as the most Innovative Design