Last up date

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Othello Solingen Germany by Anton Wingen JR - famous brand in the 80s and 90s

Intended Use: Hunting

Type of production: handcrafted
Blade: 440 steel
Country of manufacture: Germany
Handle: deer
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 235mm.
Weight: 210g.
Sheath: Leather
Notes: 1980s vintage knife discontinued 

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The PUP (Phone Utility Pouch) model has an easy-access external pocket designed to safely store and transport mobile phones or radios.

The unique design allows you to extract the mobile phone / radio with a single gesture. The lateral elastic retention keeps the cellphone or radio in place securely. There is also a main zippered compartment with a mesh pocket to organize everything at its best.

The PUP is supplied with two TacTie PJC3 rear clips made of polymers designed for the modular attachment to any surface compatible with MOLLE type systems such as ATLAS or PALS.

* Total dimensions: 8.9x7.6x15.2cm
* Front pocket: 8.9x4.5x13.3 / 17.8 (max) cm
* Main Bought: 8.9x5.1x15.2
* Weight: 130g

GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS

* 1000-denier ballistic nylon resistant to water and abrasion
* DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust
* YKK high resistance hinges
* Stress points joined together with double, triple, square and X stitching
* UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing
* Nylon stitching with very high tensile strength
* Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and cordages made of military grade paracord

MAINTENANCE

* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergents or bleaches
* Do not iron

The Valence (pronounced "VAY-LENCE") is a CCW technology (concealed carry weapon) shoulder bag with adjustable belt for right or left side transport. The backpack can easily be transformed from a shoulder bag and vice versa. It has a padded main compartment, with dual access, closed by a double zipper equipped with lockable sliders, designed to accommodate laptops / tablets up to 13 inches. It also has a CCW back compartment with a double hook security lock.

GENERAL TECHNICAL CHARACTERISTICS OF MAXPEDITION PRODUCTS

* 1000-denier ballistic nylon resistant to water and abrasion
* DuPont Teflon Fabric Protector treatment to make the Nylon resistant to dirt and dust
* YKK high resistance hinges
* Stress points joined together with double, triple, square and X stitching
* UTX-Duraflex Nylon buckles to guarantee maximum silent opening and closing
* Nylon stitching with very high tensile strength
* Vulcanized padding with polysulfides of Robac AS-100 xacenic acid to guarantee maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and cordages made of military grade paracord

VALENCE FEATURES

* Internal volume of 10L
* Overall dimensions of 27.9x14x36.8cm
* Front pocket of 24.8x5.1x35.6cm
* Main compartment of 24.1x7.6x36.8cm
* CCW compartment of 24.1x35.6cm
* Weight of 816g.
* Ambidextrous single shoulder bag
* Removable belt with double quick release
* Closure with bidirectional zip closable with padlock

MAINTENANCE

* Wipe a clean and damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergents or bleaches
* Do not iron

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The wildly popular Jumbo™ Versipack® reigns supreme, inspiring 6 different variants that boast 38% more space than the #0403 FATBOY™ VERSIPACK®. Purposefully designed, the multi-functional Jumbo™ has a quick release buckle and tuck-in flap for immediate access to multiple pockets & dividers, a spacious rear compartment with Hook-&-Loop interior for CCW, a paracord cinch pouch fitted for 32oz/1L water bottle or radio, and a quick-release ergonomic shoulder & waist strap for fluent mobility.

It's no wonder Maxpedition® customers around the globe rely on the Jumbo Versipack as their #1 everyday carry bag.

Product Dimensions
Main compartment: 8"(L) x 4"(W) x 8.5"(H) View Product Dimensions Diagram
Exterior front
10"(L) x 8"(H) closure flap
2" quick release buckle
One (1) 6.5"(L) x 2"(H) loop field for patches
One (1) 7"(L) x 5.5"(H) zippered pocket
One (1) 6"(L) x 5"(H) slip pocket
One (1) 6"(L) x 8"(H) x 1.75"(W) zippered pocket
One (1) 6"(L) x 5'(H) internal mesh pocket
Internal key retention clip
Exterior rear
Breathable padding for comfort
Removable 1" webbing waist belt, with SRB closure
Exterior left
One (1) 7.5"(H) x 3.5" diameter cord cinch pouch with base-grommet for 32oz/1L water bottle or radio
1.5" x 5" hook and loop bottle retainer, with cinch cord
Exterior right
One (1) 3"(L) x 6"(H) x 1.5"(W) zippered pouch, with 2 rows / 2 channels PALS webbing
One (1) interior 3"(L) x 4.5"(H) slip divider
One (1) exterior 3" x 7" slip pocket
Exterior top
One (1) 7"(L) x 3"(W) x 1"(H) zippered pouch
One (1) 7"(L) x 2"(H) loop field for patches
Exterior bottom
3-channel 3/4" webbing daisy chain
Main interior front
One (1) 8"(L) x 6"(H) slip pocket
Main interior rear
One (1) 8"(L) x 6"(H) slip pocket
Straps
Fixed shoulder strap made from 2" webbing 33" min. adjustable to 48" max. length; with 2' non-slip shoulder pad, 2" quick release buckle and Keyper™ attachment point
Additional storage
9"(L) x 10"(H) concealed zippered compartment with internal 7"(L) x 8"(H) loop field for CCW
Other features
Grab handle made from 0.75" webbing
Cinch cord storm collar helps keep contents out of the weather
Removable waist strap
5-channel PALS webbing on right strap base for attaching other Maxpedition gear
#0413 JUMBO S-TYPE™ VERSIPACK® available for left side carry

Modello per mancini

Il FatBoy è molto più di un pratico zaino monospalla. E' lo stato dell'arte degli accessori e provvede ad un sicuro contenimento di tutti gli accessori e ad una rapida accessibilità all'equipaggiamento di uso quotidiano.

Il compartimento primario ha un'enorme capacità di 156 cu. in. ed è dotato di chiusure resistenti all'acqua. Ha inoltre molteplici ancoraggi esterni che permettono di ampliare il tutto con tasche ed accessori modulari opzionali.

Ogni FatBoy è accompagnato da un comodo spallaccio regolabile antiscivolo per garantire il massimo confort durante l'uso prolungato.

* Scomparto Principale: 6.5" (L) x 3" (W) x 8" (H)
* Tasca Frontale: 5" (L) x 1.5" (W) x 7" (H)
* Scomparto Posteriore: 8" (L) x 7.5" (W)
* Lato A (tasca con 2 file di attacchi): 3" (L) x 1.5" (W) x 6" (H)
* Lato B (fodero): 1.5" (L) x 1" (W) x 5" (H);
* Lato C (tasca per cellulare): 2.5" (L) x 1" (W) x 4" (H) con due portapenne
* Spallaccio : strap integrali da 2" antiscivolo.

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

A low-profile everyday carry pack loaded with features and attachment points; the Remora™ is a purposefully designed bag with CCW compatibility bag that doesn't scream, "Gun!" Pack your standard photo gear, some extra clothes or a general-purpose first aid kit.
An additional front pocket and pouch are perfect for storing your wallet, phone, keys, binoculars, admin kit and/or hand-wipes.
Carry it by its padded grab handle or concealable shoulder strap. The Remora is fantastic for mountain biking, running or everyday urban use.

Product Dimensions
Overall size: 8"(L) x 5"(W) x 10"(H) View Product Dimensions Diagram
Volume: 320 cu.in. / 5.2L

Main Interior Front
7.5"(L) x 3"(W) x10"(H)

Exterior front
One (1) 4.5"(W) x 2"(H) loop field for patches
Sleeve and bungee retainer
2 rows of 4-channel PALS webbing
One (1) 5.5"(L) x 6.5"(H) external zippered pocket
One (1) 6"(L) x 6.5"(H) x 1"(W) zippered pouch with drainage grommet
One (1) 5.5"(L) x 4.5"(H) internal slip pocket
Keyper™
Internal 2-channel elastic organization

Exterior rear
One (1) 7"(L) x 8"(H) padded compartment with 6"(L) x 8"(H) internal loop field for tuck-away strap concealment or CCW
Button-snap enclosure with D-Ring pull
Belt loop with Hook-&-Loop fastener

Exterior left
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior right
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior top
1.25" padded grab handle
2 channels of PALS webbing
2 D-Ring attachment points for optional shoulder carry
Exterior bottom
Drainage grommet

Main interior front
One (1) 7"(L) x 6.75"(H) slip pocket with 4"(L) x 7"(H) loop field for CCW

Main interior rear
One (1) 7"(L) x 7.75"(H) slip pocket with Hook-&-Loop enclosure strap made from 2" webbing

Straps
Concealable/removable shoulder strap made from 2" webbing with 2" quick release buckle and attachment clip
GEARSLINGER® - AMBIDEXTROUS STRAPS

Gearslinger® ambidextrous strap designs provide left and right side connections, allowing you to switch shoulders for convenient rifle shouldering, heavy carries and extended trips.

Product Materials
1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
Teflon™ fabric protector for grime resistance and easy maintenance
high strength zippers and zipper tracks
UTX-Duraflex nylon buckles for low sound closures
Triple polyurethane coated for water resistance
High tensile strength nylon webbing
High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
#AS-100 high grade closed-cell foam padding material for superior shock protection
Internal seams taped and finished
Paracord zipper pulls
Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength

Cleaning Instructions
MAXPEDITION's nylon fabric is treated with Dupont Teflon for superb water and grime resistance.
To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
Do not machine wash.
Do not use detergent or bleach.

A low-profile everyday carry pack loaded with features and attachment points; the Remora™ is a purposefully designed bag with CCW compatibility bag that doesn't scream, "Gun!" Pack your standard photo gear, some extra clothes or a general-purpose first aid kit.
An additional front pocket and pouch are perfect for storing your wallet, phone, keys, binoculars, admin kit and/or hand-wipes.
Carry it by its padded grab handle or concealable shoulder strap. The Remora is fantastic for mountain biking, running or everyday urban use.

Product Dimensions
Overall size: 8"(L) x 5"(W) x 10"(H) View Product Dimensions Diagram
Volume: 320 cu.in. / 5.2L

Main Interior Front
7.5"(L) x 3"(W) x10"(H)

Exterior front
One (1) 4.5"(W) x 2"(H) loop field for patches
Sleeve and bungee retainer
2 rows of 4-channel PALS webbing
One (1) 5.5"(L) x 6.5"(H) external zippered pocket
One (1) 6"(L) x 6.5"(H) x 1"(W) zippered pouch with drainage grommet
One (1) 5.5"(L) x 4.5"(H) internal slip pocket
Keyper™
Internal 2-channel elastic organization

Exterior rear
One (1) 7"(L) x 8"(H) padded compartment with 6"(L) x 8"(H) internal loop field for tuck-away strap concealment or CCW
Button-snap enclosure with D-Ring pull
Belt loop with Hook-&-Loop fastener

Exterior left
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior right
3 rows of 2-channel PALS webbing
D-Ring attachment point for optional shoulder carry

Exterior top
1.25" padded grab handle
2 channels of PALS webbing
2 D-Ring attachment points for optional shoulder carry
Exterior bottom
Drainage grommet

Main interior front
One (1) 7"(L) x 6.75"(H) slip pocket with 4"(L) x 7"(H) loop field for CCW

Main interior rear
One (1) 7"(L) x 7.75"(H) slip pocket with Hook-&-Loop enclosure strap made from 2" webbing

Straps
Concealable/removable shoulder strap made from 2" webbing with 2" quick release buckle and attachment clip
GEARSLINGER® - AMBIDEXTROUS STRAPS

Gearslinger® ambidextrous strap designs provide left and right side connections, allowing you to switch shoulders for convenient rifle shouldering, heavy carries and extended trips.

Product Materials
1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
Teflon™ fabric protector for grime resistance and easy maintenance
high strength zippers and zipper tracks
UTX-Duraflex nylon buckles for low sound closures
Triple polyurethane coated for water resistance
High tensile strength nylon webbing
High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
#AS-100 high grade closed-cell foam padding material for superior shock protection
Internal seams taped and finished
Paracord zipper pulls
Stress points double stitched, Bartacked or "Box-and-X" stitched for added strength

Cleaning Instructions
MAXPEDITION's nylon fabric is treated with Dupont Teflon for superb water and grime resistance.
To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
Do not machine wash.
Do not use detergent or bleach.

The Hobbit - Thorin Oakenshield key and map of Erebor NN1212 - The Hobbit

- Officially Licensed from the film trilogy The Hobbit
- Map of Thorin Oakenshield with wooden display including key Thorin
- Pack size: 11 x 39 x 43 cm
- Weight: 2.28 Kg

The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product

The Hobbit - Playing in a 1: 3 of the sword of Thorin from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.

Officially licensed product accompanied by "The Hobbit" for New Line Cinema

The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product

The Hobbit - Playing in a 1: 3 Sword of Thranduil from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 21 cm.

Officially licensed product accompanied by "The Hobbit" for New Line Cinema

The Hobbit - Miniature dagger Tauriel - open letters - NN1213 - official product

Lord of the Rings - Playing in a 1: 3 of the dagger of Tauriel from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.

Officially licensed product accompanied by "Lord of the Rings" in New Line Cinema

The Hobbit - Dwarven Treasure Coin Set - coins dwarven NN6087 - The Hobbit

Erebor is a dwarven city of enormous size, located in the mountains east of Mirkwood, which sees inside tall chambers filled with gold. The city was governed by an endless line of kings, including Thrain and Thorin, and for some years it was occupied by the ruthless dragon Smaug. It was also the capital of the United flourishing under the Mountain.

container wood
- Measures 26.5 x 8.5 x 2.2 cm

metal coins
- 5 dwarven coins of different sizes

Officially Licensed!

Brooch made entirely of hypoallergenic metal, plated with silver. Manufactured under license from Noble Collection Official HBO.

This brooch, once again the coat of arms of Daenerys Targarien and features three dragon heads surmounting a long pole. The ring set is free to rotate and to move freely.

Size: 11x7x4.5cm

Maxpedition - Octa Versipack Khaki MX455K pouch

Pouch Maxpedition Octa Versipack Khaki.

The main compartment measures 22.86cm x 12.7cm x 7.62cm, the front measuring 15.24cm x 12.7cm x 3.81cm.

The two side pockets measure 13.97cm x 10.16cm and 20.32cm x 10.16cm.

On the top there is a compartment for the trasporo a flashlight, waist measurement mt 1.22.

color desert

Othello Solingen Germany by Anton Wingen - Bowie Knives - Knife

Othello Solingen Germany by Anton Wingen JR - brand famous in the 80s and 90s

Intended Use: Hunting

Type of production: craft
Blade: stainless steel 440
Production Blade: Germany
Handle: deer
Blade length: 160mm.
Blade Thickness: 6mm.
Length closed: -
Overall length: 295mm.
Balancing: -
Weight: 374g.
Closure: -
Clip: -
Sheath: Leather
Notes: vintage knives

Description: Maxpedition SaberCat Versipack.

Una variante supersize del Versipack Proteus, con molte più funzioni.

Il vano principale misura 25.4cm x 17.78cm x 10.16cm,

il vano frontale misura 17.78cm x 17.78cm x 3.81cm, i vani laterali misurano 17.78cm x 10.16cm x 6.35cm.

Colore Khaki -

Maxpedition - Proteus Versipack Khaki - 0402K

TECHNICAL PRODUCTS MAXPEDITION

* 1000 denier ballistic nylon with water-resistant and abrasion
* Treatment DuPont Teflon Fabric Protector to make nylon resistant to dirt and dust
* YKK high strength
* Stress points double stitched together, triple, quad and in X
* UTX-Duraflex nylon buckles for maximum noiseless opening and closing
* Stitched with high tensile nylon
* Padding vulcanizates with polysulphide acid xantico Robac AS-100 to ensure maximum shock absorption
* Internal seams taped and vulcanized
* Drawstring and ropes made of military grade paracord

FEATURES PROTEUS

* Bag highly compartizzata with large capacity expansion by applying external accessories
* Main compartment of 20x15x10cm
* Overall dimensions of 38x18x9cm
* Can be used as a bag or pouch
* Full compatibility with accessories such SPRINGS

MAINTENANCE

* Pass a clean, damp cloth on the surface and wait for the product to dry naturally.
* Do not machine wash
* Do not dry clean
* Do not use detergent or bleach
* Do not iron

Maxpedition E.D.C. Pocket Organizer bag 0246F

Maxpedition E.D.C. Pocket Organizer green leaf.

Compact Design.

Measuring 12.7cm x 17.78cm x 1.90cm.

It fits perfectly in the pocket of cargo pants or backpack / bag.

Full clamshell opening main compartment with double zipper.

Inside has a pocket on the left, a keychain and a elastic organizer with 9 compartments.

Inside has a pocket on the right, a hook and an elastic organizer with 6 compartments.

The exterior features a front mesh pocket with hook-and-loop closure.

At the rear it has a handle.

Maxpedition - FR-1 Combat Medical Pouch Foliage Green 0226F

The pockets of the Maxpedition FR-1 is definitely a more advanced version of the common pocket for first aid, thanks to the versatility afforded it.

It can be used as a normal bag or as a multi-purpose pocket for first aid kit.

Overall Dimensions: 7 "x 5" x 3 "with full zipper opening

Carrying handle

Front: 2 rows of MOLLE attachments, 2 loops 2.5 "each

Side frame: 2 rows of MOLLE attachments, 1 Loop

Equipped with D-Rings for attaching a shoulder strap (optional accessory, not included)

Compatible with hooks Tie Tac-5 "is not included, sold separately

The pocket opens to its full length, and inside there are many lanyards (paracord) with adjustable clips that allow you to adjust the maximum angle of opening.

On both halves (more inside) we find numerous elastic loops of various sizes that allow you to maintain balances objects placed inside it.

This pocket is also provided on the inside of a coupling in paracord, to which it is possible to hang various objects, such as a torch for example.

Material: Fabric Nylon / Cordura 1000 denier, rugged and water resistant.

Teflon protection: long-lasting protection against water stains or oil and dust.

Simple to clean, requires no special maintenance: Only clean using a damp cloth and allow to dry naturally. Do not machine wash. Do not use detergent or bleach.

Resistant YKK zippers.

UTX-Duraflex nylon buckles with silent closure.

Internal seams taped and finished.

Product Features

Maxpedition Condor II Hydration Backpack.la Condor II may contain more than 32L of tools. A detachable strap upper Y-shaped belts and four quick release side compression secure content and takes the strain hinges. Wide shoulder straps with high breathability support provides superb cooling characteristics. As with all Maxpedition backpacks, the bearing capacity can be expanded greatly with other modular pockets, added to the backpack on the front or side PALS attachment points using Malice clips. Hydration compartment is compatible with most of the systems of post-hydration. Color: Black

- Dimensions: 17.5 "(H) x 14" (W) x 6.5 "(D) Main Compartment
- 5.5 "(H) x 9" (W) x 2 "(D) Upper Front Pouch
- 8 "(H) x 9" (W) x 2.5 "(D) Lower Front Pouch
- Approximate Overall Capacity: 1950 cu. in. / 32 L
- Hydration: Fits up to 100 oz / 3L Reservoir (sold separately)
- Support: 1 "Sternum Strap, 1.5" Waist Strap (min 14 "strap alone / max 42" strap alone; min 28 "loop / max 56" loop)
- Optional accessories: Hook & Loop Modular Accessories and Grimloc Carabiner
- Empty Weight: 47.8 oz.

Pendant in the shape of dragon egg Daenerys Targaryen, including necklace, made entirely of heavy 925; has dimensions of 25x20mm. Manufactured under license from Noble Collection Official HBO.

Daenerys Targaryen House Targaryen, is the only remaining member of his race, the daughter of the previous king Aerys II Targaryen said the Mad King, and is the only princess and rightful heir of the Seven Kingdoms. Exiled from them since before he was born, in principle Daenerys tries to win them back together with her brother Viserys, devoting following the abolition of slavery in the lands of Westeros and Essos.

Pendant of the House Targaryen, including necklace, made entirely of 925 sterling silver; has dimensions of 25x25mm. Manufactured under license from Noble Collection Official HBO.

House Targaryen is a noble family, part of the world of the fantasy saga A Song of Ice and Fire by George RR Martin.

The Targaryen have reigned as the royal house of Westeros for nearly three hundred years after the capital, King's Landing, and the island fortress of Dragonstone.

Their coat of arms is a three-headed dragon, red on a black field, and their motto is "Fire and Blood." It is said that the three-headed dragon represents symbolically Aegon I and his sisters.

Pendant of the House Lannister, made entirely of 925 sterling silver and gold plated has dimensions of 25x20mm including necklace made entirely of 925 sterling silver. Manufactured under license from Noble Collection Official HBO.

The House Lannister is one of the eight great noble houses, part of the world of the fantasy saga A Song of Ice and Fire by George RR Martin.

The Lannisters are the protectors of the West, dominate the rich goldfields Lannisport. Their residence is the stronghold of Castel Granite (Casterly Rock in the original). The bastards born in the domains to their faithful have a surname Hill.

Their coat of arms is a golden lion in the purple field, their official motto is: "Hear my roar!", But the other nobles and the people recognize them for "A Lannister always pays his debts."

A Game of Thrones - Playing use the book holder of Thrones - NN0071 - Game of Thrones

Reproduction official holder to use the book of the "Game of Thrones" is the TV series Game of Thrones

Official product of Noble Collection behind the official HBO licenses

Size: 19cm x 13cm x 13cm

An intricately detailed replica of the pin worn by the king's most important advisor. Measures approximately 4.5" " in length.

The Maxpedition Small Tactical Gear Retractor is a convenient key ring and retractable tool holder for maximum convenience of use. Made with a sturdy Kevlar cord 90cm long. is quick and convenient to use.

Features: Provides your keys and your tools in the best way, making them always ready to use cable with Kevlar than 90cm.

Resistance of Kevlar cord up to 24kg, tensile strength retractable cord 170g.

Easy to attach to belts or backpacks thanks to the attack Velcro Universal Quick to remove thanks to the fast-lock mechanism stainless steel interior Made entirely in the USA

Pendant of the House Stark, made entirely of 925 sterling silver, has dimensions of 25x20mm
Official product of Noble Collection behind the official HBO licenses