Last up date

The Guided Sharpening System is our complete bench sharpening and honing system. It was created with both beginners and master sharpeners in mind and can be used to sharpen all knives in your possession.

The innovative Pivot-Response system follows the curvature of the blade during sharpening to give you an accurate edge along the entire length of the blade. You don't need to acquire skill with this tool because the skill is already built into the tool, making sharpening fun and easy to learn thanks to the 17° and 20° angle guides. The Guided Sharpening System with Angle Guides can be used separately and carried with you in the field, so you can keep sharpening away from the workbench.

Use the Guided Sharpening System to perfectly sharpen your pocket, hunting and kitchen knives as well as serrated blades, fish hooks and a variety of tools quickly and easily.


- Sturdy plastic and stainless steel construction
- Coarse diamond stone with grit #320 and guided angle of 17° or 20°
- Fine diamond stone with grit #600 and guided angle of 17° or 20°
- 3-position ceramic sharpener (roughing, polishing and fish hooks) with 20° guided angle
- Small ceramic sharpener for serrated blades

Faithful reproduction of the Roman sword produced by Windlass

Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment

"Forged by the dark elves, the sword was wielded by wood elves for hundreds of years until it was given to a man, since then it is called the" Black Sword. "Feared by orcs, dwarves, men and evil beasts, the sword bearer performed many great feats until his death while slaying a great evil dragon. "

The Blacksword fantasy sword features a burnished tempered carbon steel blade.

The guard and knob are made of cast metal, while the handle is made of wood wrapped in black leather. Includes a black leather sheath.

Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 80 cm.
Total length: 108cm.
Blade thickness: 5mm.
Weight: 1596 g.
Note: the blade is not sharp

Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.

High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.

Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp

Robert I Bruce was king of Scotland from 1306 to 1329. Of Norman and Scottish Gaelic ancestry, he was one of the greatest kings of Scotland, and also one of the most famous warriors of his era. He led Scotland against the Kingdom of England during the Scottish Independence Wars.
He was the great-grandson of David I of Scotland and was often at odds with the Scottish hero William Wallace.

Sword characteristics:

- Total length: 110 cm
- Blade length: 92 cm
- Blade: in High Carbon Steel
- Handle: metal and leather
- Weight: 1.35 kg
- Thickness: 4 mm
- Accessories: sheath and belt in
- Blocking: 13cm from the guard branch

The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.

The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.

Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -

Reproduction of an Italian dagger of the 14th / 15th century.

The shaped handle and the fishtail pommel, combined with an elegant guard, give it a regal appearance. The long blade has a central reinforcement rib that allows it to support heavy lunges. Excellent overall balance and handling speed.

Steel blade with high carbon content, through tang. Guard and knob in nickel-plated metal.

Blade: carbon steel - NOT SHARP
Handle: brown leather
Knob: carbon steel
Guard: nickel-plated metal
Sheath: brown leather and steel
Blade length: 338mm.
Handle Length: 165mm.
Total Length: 502mm.
Blade width: 30mm.
Blade thickness: 6.7mm.
Weight: 464g.
Weight with Sheath: 552g.

Intended use: sports / collection / hunting

Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box

Reproduction of the Italian Renaissance dagger potentially worn on the belt by Lorenzo de 'Medici. Said Lorenzo the Magnificent (Florence, 1 January 1449 - Careggi, 8 April 1492), he was lord of Florence from 1469 to his death, the third of the Medici dynasty. He was also a writer, patron, poet and humanist, as well as one of the most significant politicians of the Renaissance, both for having incarnated the ideal of the humanist prince, and for the very careful management of power.

The cut-free dagger on both sides is made of carbon steel, with precise and accurate workmanship and leather finishes. The hilt and the knob are in steel and the handle is covered in soft black leather. Comes with a leather sheath and steel fittings.

Blade: carbon steel
Handle: black leather
Knob: carbon steel
Guard: carbon steel
Sheath: black leather and steel
Blade length: 280mm.
Handle Length: 95mm.
Total Length: 415mm.
Blade width: 24mm.
Blade thickness: 4.5mm.
Weight: 448g
Weight with Sheath: 542g.

Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.

Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -

Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -

- Battle Sword in a hand 501000 - battle ready

Blade: carbon steel and WIRE WITH BULLET TIP 3 MM suitable for battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1122g.
Balance: 14cm. by guard branch

We are glad to offer our new line of blunt swords and rapiers developed for the rigors of mock combat.

Each blade is built to withstand a lot of use by reenactors or stage performers.

Full tang sword forged of high carbon steel 1095, fully tempered.

The edges and points are 3/16" thick and rounded over for better nick resistance.

Wood grips covered with leather and other authentic materials.

All come with scabbards.

Museum Replicas Windlass - One Hand Battle Sword - 501002 - battle ready

Blade: made of carbon steel, dull, battle ready
Handle: Leather
Knob: carbon steel
Guard: carbon steel
Sheath: Leather & Steel
Blade length: 82cm.
Total Length: 100cm.
Blade width: 50mm.
Blade Thickness: 3mm.
Weight: 1140G.
Balance: 13cm. by guard branch

Museum Replicas Windlass - Gladiator - Tigris Axe 880011

From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.

Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.

Weight: 2014g.
wooden display support

© 2010 DW Studios LLC. All Rights Reserved.

Museum Replicas Windlass - Sword of the Knights of Malta - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.

Guard and pommel are made of steel.

Sheath, including the sword, a leather belt with.

- Overall length: 103cm

- Length of the blade: 86,5cm

- Blade width: 4.8 cm

- Weight: 1260 gr

Museum Replicas Windlass - Sword of Tancred - Craft Sword

Characteristics:

The blade is made of carbon steel with handle in leather.
Steel guard and pommel.
Sheath, including the sword, a leather belt with.

- Overall length: 102,5cm
- Blade length: 84cm
- Blade width: 5 cm
- Weight: 1630 gr

Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.

Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios

The Hobbit - Thorin Oakenshield key and map of Erebor NN1212 - The Hobbit

- Officially Licensed from the film trilogy The Hobbit
- Map of Thorin Oakenshield with wooden display including key Thorin
- Pack size: 11 x 39 x 43 cm
- Weight: 2.28 Kg

The Hobbit - Miniature of the sword of Thorin - open letters - NN1204 - official product

The Hobbit - Playing in a 1: 3 of the sword of Thorin from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.

Officially licensed product accompanied by "The Hobbit" for New Line Cinema

The Hobbit - Miniature Sword Thranduil - open letters - NN1224 - official product

The Hobbit - Playing in a 1: 3 Sword of Thranduil from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 21 cm.

Officially licensed product accompanied by "The Hobbit" for New Line Cinema

The Hobbit - Miniature dagger Tauriel - open letters - NN1213 - official product

Lord of the Rings - Playing in a 1: 3 of the dagger of Tauriel from "The Hobbit"

Blade: Stainless Steel 420J2
Support: wooden box
Sword Length: 20 cm.

Officially licensed product accompanied by "Lord of the Rings" in New Line Cinema

The Hobbit - Dwarven Treasure Coin Set - coins dwarven NN6087 - The Hobbit

Erebor is a dwarven city of enormous size, located in the mountains east of Mirkwood, which sees inside tall chambers filled with gold. The city was governed by an endless line of kings, including Thrain and Thorin, and for some years it was occupied by the ruthless dragon Smaug. It was also the capital of the United flourishing under the Mountain.

container wood
- Measures 26.5 x 8.5 x 2.2 cm

metal coins
- 5 dwarven coins of different sizes

Officially Licensed!

Brooch made entirely of hypoallergenic metal, plated with silver. Manufactured under license from Noble Collection Official HBO.

This brooch, once again the coat of arms of Daenerys Targarien and features three dragon heads surmounting a long pole. The ring set is free to rotate and to move freely.

Size: 11x7x4.5cm

Museum Replicas Windlass - Left Hand Deschaux Dagger - Dagger craft

Blade: steel with high carbon content
Handle: Bone
Knob: Carbon Steel
Guard: carbon steel
Sheath: Black leather and steel
Blade Length: 305mm.
Overall Length: 455mm.
Blade Thickness: 3.5 mm.
Weight: 462.
Weight with Sheath: 558g.
Balancing: the guard
Sheath: Leather

È formato da un manico in legno che culmina in una testa. Quest'ultima ha una protuberanza su 5 lati: era in grado di forare una corazza come altre armi dello stesso genere, le mazze. Impugnatura: Legno rinforzato in acciaio
Testa: Acciaio al carbonio
Lunghezza Totale: 680mm.
Lunghezza Martello: 130mm.
Spessore Impugnatura: 30x30mm.
Spessore Testa: 33x33mm.
Peso: 1136g.

Pendant in the shape of dragon egg Daenerys Targaryen, including necklace, made entirely of heavy 925; has dimensions of 25x20mm. Manufactured under license from Noble Collection Official HBO.

Daenerys Targaryen House Targaryen, is the only remaining member of his race, the daughter of the previous king Aerys II Targaryen said the Mad King, and is the only princess and rightful heir of the Seven Kingdoms. Exiled from them since before he was born, in principle Daenerys tries to win them back together with her brother Viserys, devoting following the abolition of slavery in the lands of Westeros and Essos.

Pendant of the House Targaryen, including necklace, made entirely of 925 sterling silver; has dimensions of 25x25mm. Manufactured under license from Noble Collection Official HBO.

House Targaryen is a noble family, part of the world of the fantasy saga A Song of Ice and Fire by George RR Martin.

The Targaryen have reigned as the royal house of Westeros for nearly three hundred years after the capital, King's Landing, and the island fortress of Dragonstone.

Their coat of arms is a three-headed dragon, red on a black field, and their motto is "Fire and Blood." It is said that the three-headed dragon represents symbolically Aegon I and his sisters.

Pendant of the House Lannister, made entirely of 925 sterling silver and gold plated has dimensions of 25x20mm including necklace made entirely of 925 sterling silver. Manufactured under license from Noble Collection Official HBO.

The House Lannister is one of the eight great noble houses, part of the world of the fantasy saga A Song of Ice and Fire by George RR Martin.

The Lannisters are the protectors of the West, dominate the rich goldfields Lannisport. Their residence is the stronghold of Castel Granite (Casterly Rock in the original). The bastards born in the domains to their faithful have a surname Hill.

Their coat of arms is a golden lion in the purple field, their official motto is: "Hear my roar!", But the other nobles and the people recognize them for "A Lannister always pays his debts."

A Game of Thrones - Playing use the book holder of Thrones - NN0071 - Game of Thrones

Reproduction official holder to use the book of the "Game of Thrones" is the TV series Game of Thrones

Official product of Noble Collection behind the official HBO licenses

Size: 19cm x 13cm x 13cm

An intricately detailed replica of the pin worn by the king's most important advisor. Measures approximately 4.5" " in length.

Pendant of the House Stark, made entirely of 925 sterling silver, has dimensions of 25x20mm
Official product of Noble Collection behind the official HBO licenses

Corpo e Testa: acciaio al carbonio, brunito
Impugnatura: cuoio nero
Dimensioni Testa: 75x75 mm.
Lunghezza Impugnatura: 200 mm.
Lunghezza Totale: 600 mm.
Spessore Corpo: 20 mm.
Peso: 792 g.

Faithful reproduction of the helmet used by King Leonidas in the film "300".

Manufacturer: Windlass.

The helmet, wearable, is made of steel with a bronze-effect plating, leather lining, synthetic crest. Equipped with exhibition support.

Dimensions: about 30 x 45 x 20 cm, crest included.

Elmo indossabile in acciaio lavorato a mano che riproduce fedelmente quello utilizzato da Russel Crowe ne "Il Gladiatore"

Ottima qualità e livello costruttivo

Incluso supporto in legno espositivo

Scudo tondo popolare tra il 13esimo ed il 17esimo secolo. Questo tipo di scudo era preferito da molti soldati a quelli più grandi perchè conferiva maggior rapidità di movimento pur sacrificando un poco di copertura.

Realizzato interamente in acciaio al carbonio, ha un diametro di 59cm. doppia impugnatura in cuoio e peso di circa 2500g.

Scudo prodotto dalla Windlass, tratto dal film di 300.

Materiali: lo scudo è fatto in acciaio con rivestimento placcato in rame.
La parte interna è rivestita in gommapiuma e munita di cinghie di cuoio per il trasporto.

Dimensioni: 94 cm
Peso: 9 kg

Replica della spada n. IV-1787 presente nella Reale Armeria d'Inghilterra.
Ben bilanciata e relativamente leggera, consente un brandeggio abbastanza rapido nonostante l'indubbia imponenza.
Lama: in acciaio al carbonio - non affilata
Lunghezza lama: 111.5cm.
Spessore lama: max 4.6mm.
Lunghezza Totale: 145.5cm.
Peso: 2050g.
Bilanciamento:9 cm dalla guardia

Faithful reproduction produced by Windlass, of the sword taken from the movie "The Gladiator", epic film of 2000, directed by Ridley Scott and starring Russell Crowe.

Exhibition product

Blade: Carbon steel
Handle: in synthetic material, wood and bronze
Blade length: 75cm.
Total Length: 97cm.
Blade thickness: 3mm.
Balancing: advanced, at 3cm. from the guard branch
Sheath: in wood and leather with brass fittings
Weight: 1450g.