Last up date
-
Aesculap - Cutter head 1,8 mm - GT710
Testa di taglio professionale, intercambiabile, in acciaio inox riaffilabile, per tosa animali, compatibile con le tosatrici Aesculap Favorita II e Elektra II Turbo Line ad unica testina con perno regolabile.
Larghezza pettine di taglio: 3 mm.
Impiego: Professionale - TolettatoreGT710 -
Aesculap - Replacement Head 2mm - SHORT TEETH - GH715/2 - clipper
Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pivot.
SHORT TEETH.
Cutting comb width: 42 mm.
Use: Professional - Groomer
11081 -
Weis - Reinforced Chinois Strainer With Fine Mesh 8-in
LO CHINOIS Professional stainless steel conical sieve / chinois with an extremely fine mesh, ideal for straining sauces, custard, soups and purees.Made out of 18/10 stainless steel this Italian made Chinois is of the best commercial quality, designed to perform to the highest standards. excellent for straining fruits, vegetables, soups and sauces. This Chinois is a delightful professional tool, made entirely of stainless steel with a fine mesh that prevents seeds, pulp and skins from slipping through. A hook on one side holds to the side of your pan or bowl as you work Measuring 200mm in diameter. Its all stainless construction means it is easy to toss in the dishwasher and Guarantees a long life span. Made out of 18/10 stainless steel. Ultra fine and reinforced mesh Entire piece made of 18/10 stainless steel Front hook support Dimensions: 8-in (20 cm) diameter, Total length including front hook: 18-in (46 cm) Dishwasher safe Made in Germany.8330022€36.89Only 1 leftOut of stock -
Aesculap - Replacement Head 1 millimeter GT736- WIDE STEP - clipper
Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 42 mm.
Tooth pitch: approximately 2 mm.
Use: For shaving - Professional - Surgical (veterinary) use.11023 -
Aesculap - Replacement Head 0.5mm - GT 730/ 1/2 clipper
Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.GT730 -
Aesculap - Replacement Head 1 millimeter - GH712 - clipper
Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.3300-1 -
Aesculap - 12mm replacement head - GT782 clipper
Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting height: 12 mm.
Cutting comb width: 47 mm.
Use: Professional - GroomerGT782 -
Aesculap - Replacement head 16mm GT784 - clipper
Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting height: 16 mm.
Cutting comb width: 47 mm.
Use: Professional - Groomer3300-16 -
Aesculap - 7mm replacement head - clipper - GT770
Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 42 mm.
Use: Professional - GroomerGT770 -
Aesculap - Cutter head 9 mm - GT799
Testa di taglio professionale, intercambiabile, in acciaio inox riaffilabile, per tosa animali, compatibile con le tosatrici Aesculap Favorita II e Elektra II Turbo Line ad unica testina con perno regolabile.
Larghezza pettine di taglio: 42 mm.
Impiego: Professionale - TolettatoreGT779 -
Aesculap - Econom Equipe - Shearing machine for equines
This professional shearing machine is exclusively suitable for shearing:horses
Technical specifications:Size (W - H - L): approx. 78mm x 70mm x 290mm
Weight without cable: 1395gr.
Power: normal voltage 220 volts - normal power 160 watts - maximum speed 2200 rpmEquipment:
1 - Hair clipper with head
1 - Special screwdriver
1 - Bottle of lubricating oil
1 - Instruction manual
1 - Plastic carrying caseEach clipper before being shipped is checked by our in-house sharpening laboratory.
We recommend constant lubrication using the oil provided inside the package to be applied to the blades after each use.
3414 -
Aesculap - Favorita II - GT104 - Animal clipper
Professional clipper suitable for dogs, cats and other small animals (including veterinary).
Specifications:
- dimensions (width - height - length): approx. 50mm x 40mm x 185mm (with mounted head) - no head included in package
- weight without cable: approx. 530gr.
- power: normal voltage 220 volts 50/60HZ - power 35 watts - maximum speed 2300 rpmManufacturing: Germany.
Equipment:
- ABS carrying case;- 90ml vial of Aesculap lubricating oil.Each clipper before shipping is checked by our in-house sharpening laboratory.
We recommend constant lubrication using the oil provided inside the package to be applied to the blades after each use.of the package to be applied to the blades after each use.
3420 -
Wildrock Gear - Strikeback Tomahawk Black - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Black
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-B -
Hardcore Hardware Australia - MFK-04 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 130mm.
Blade thickness: 6mm.
Total length: 267mm.
Balancing: Advanced
Weight: 319g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK04D€220.49Out of stock -
Hardcore Hardware Australia - MFK-02 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 128mm.
Blade thickness: 6mm.
Total length: 265mm.
Balancing: Advanced
Weight: 347g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK02D€220.49Out of stock -
Aesculap - Replacement Head 1.5mm - GT746 - clipper
Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 42 mm.
Use: Professional - Groomer
11053 -
Fox/Combative Edge - SR11 Plain - FX-CED-M3 coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741 -
Fox/Combative Edge - SR11S Serrated - FX-CED-M3S - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741S -
Fox/Combative Edge - Salus - FX-CED-M2 - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: full tang, in acciaio inox N690Co
Trattamento Lama: Ti-Ni
Manicatura: G-10
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 275mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 304g.
Chiusura: -
Clip: -
Fodero: Kydex e Nylon
Confezione: Scatola di cartone con loghi Fox
Note:7743 -
Aesculap - Replacement Head 0.1mm - GH703 - clipper
Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.3300-01 -
Aesculap - Replacement Head 0.05mm - GH700 - clipper
Professional, interchangeable, re-sharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 42 mm.
Use: For shaving - Professional - Surgical (veterinary) use.3300-02 -
Aesculap - Replacement head 1 mm narrow - clipper- GT772
Professional, interchangeable, resharpenable stainless steel cutting head for animal clippers, compatible with Aesculap Favorita II and Elektra II Turbo Line single-head clippers with adjustable pin.
Cutting comb width: 19 mm.
Use: For shaving/refinishing - Professional - Surgical (veterinary) use.3300-1-S