Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

 

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

KAI presents the new Shun Classic Red DM-0717RD as a highlight. The exclusive Wide Santoku combines the proven qualities of the Shun Classic series with a new and elegant red grain pakkawood handle in a limited edition. The knife is limited to only 3,000 pieces worldwide. The serial number engraved on the bolster makes each knife unique and desirable as a collector's item.

The extremely sharp blade is made of an extremely hard VG-MAX steel core with a hardness of 61 (±1) HRC and is coated with 32 layers of Damascus steel. This combination ensures an extremely stable, hard, and yet flexible blade, ideal for a clean and precise cut. The blade is ground on both sides and is particularly lightweight, making it easier to use in the kitchen.

As with the regular knives of the Shun Classic series, the special red grain handle of the Shun Classic Red is made of pakkawood. The treatment with selected resins makes it extremely soft, elastic, durable, and moisture-resistant. Thanks to the traditional Japanese "chestnut" shape of the handle, the Wide Santoku fits comfortably in the hand during cutting and offers a firm grip.

 

Recommended use: cutting and preparing vegetables - trimming and initial processing of fish

Country of Manufacture: Japan
Blade: 32-layer Damascus laminate and VG-10 stainless steel 
Handle: Pakkawood
Blade length: 190mm.
Blade thickness: 2mm.
Total length: 325mm.
Weight: 238g.
Maintenance: hand wash only / NOT dishwasher safe
Notes: Limited edition and numbered with only 3,000 pieces worldwide

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

 

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Kai - Wooden brush 13,50cm - DH-8038

The Select 100 series from KAI offers elegant, professional-quality kitchen gadgets to match the high-quality kitchen knives.

The wooden brush is ideal in combination with the small stainless steel grater of the series, e.g. for transferring abrasion. It can be easily cleaned under running water and remains soft and supple. 

Perfect complement to the mini grater 

Ideal for raking food and cleaning graters 

Versatile in use 

Easy to clean under running water 

Made of sturdy wood 

Length: 13.50 Material: wood

Colour: Brown

Series: Seletct 100.

The compact Kai Select 100 Mini Stainless Steel Grater DH-8037 grater, fine is ideal for grating ginger, garlic or nutmeg. The small holes on the stainless steel grater are razor-sharp, allowing you to grate ingredients very finely. This is perfect for incorporating these ingredients into your dishes or, for example, making fresh ginger tea by adding grated ginger to hot water. The handle ensures a comfortable grip while grating. After use, it is important to clean the grater thoroughly with warm water and soap.

The grater is dishwasher safe, for extra convenience. Made of high-quality stainless steel, this versatile grater retains its sharp stainless steel holes for a long time and is dishwasher safe.

Dimensions & weight

Length 11 cm

Weight 55 g

Width 7 cm

Material

Material 18/8 stainless

Features & functions

Dishwasher safe Yes

Right or left-handed symmetrical

Type grater.

These Kai Shun Multipurpose Scissors are multi-purpose scissors for the kitchen. You'll be amazed at the many uses of these versatile scissors. From opening packages, to cutting flower stems or cutting herbs. You can easily take the scissors apart to clean them. As such, you know for sure that no dirt will get caught in between the blades.

Besides the scissors, there are other handy features. For example, these scissors include a nut cracker, bottle opener and a 'bone notch' that allows you to cut poultry bones or joints. At the end of the scissors are two flathead screwdrivers that also act as a lid opener to pry off lids.

The scissors are made from 420J2 stainless steel and the handles are made from glass-filled nylon. This is extra strong nylon that is resistant to drops and bumps. Another handy feature easily overlooked is the ribbed texture on the inside of the handle parts. Use this to easily open bottles with a stubborn screw cap by placing both ribbed insides around the cap. So you can use the scissors as a lever, the ridges provide a good grip on the cap.

Dimensions & weight

Blade length 9 cm

Diameter of opening for finger 5.7 cm

Diameter of opening for thumb 5.7 cm

Overall length 22.5 cm

Sharpened length 9 cm

Weight 140 g

Width 9 cm

Material

Material handle nylon

Type of steel stainless

Features & functions

Including bottle opener, nutcracker

De-mountable Yes

Dishwasher safe yes but we strongly advise against it

Right or left-handed right-handed

Type of edge partially serrated, plain edge

Function household scissors, kitchen scissors, poultry shears.

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

Professional sample cutting scissors (zig-zag cuts) Suitable for professional and personal use

• Stainless steel
• Large size
• Total length of 20 cm
• Excellent quality
• Japanese production
• Lightweight and easy to handle

 

The KAI Group, based in Tokyo, has a nearly century-long tradition in cutting products, renowned for excellent functionality, sharpness and durability. 
Based on the centuries-old tradition of Japanese samurai sword forgers, KAI products are among the best in the world for quality and perfection.

- The blades are made of AUS8A stainless steel with a hardness of 58 HRC, ensuring strength and precision cutting.
- Anti-reverberation satin-finished surface and patented “Duplex Interlock” fastener that does not come loose easily.
- Screws are treated and hardened to 45 HRC, ensuring long life and stability.
- Japanese production ensures the high quality and precision typical of Japanese products.

Total length: 15cm

Blade length: 5cm (6")

Weight: 61g

The Kiritsuke Shun Classic DM-0771 is a true work of art in the kitchen. The blade is made of VG MAX steel, known for its hardness of 61 (±1) HRC, which guarantees exceptional and long-lasting sharpness. The VG MAX steel core is covered with 32 layers of Damascus steel, giving the blade an unmistakable appearance and a perfect combination of stability, resistance and elasticity.

The blades of the Shun Classic series are sharpened on both sides, offering precision and ease of use. The tapered handle is made of durable pakka wood, maintaining the traditional Japanese chestnut shape. This material, enriched with fine resins, guarantees exceptional resistance to use and humidity.

The typical chestnut shape of the handle ensures a secure and ergonomic grip, thanks to the slight contouring on the right side. In addition, the continuous tang provides optimal stability and balance during use.

Main features

Use: Meat and vegetables
VG MAX steel: Hardness of 61 (±1) HRC, blade core up to the edge.
Damascus steel coating: 32 layers for a perfect combination of stability and resistance.
Double-sided sharpening: Precision and ease of use.
Pakka wood handle: Traditional Japanese chestnut shape, resistant to use and moisture.
Continuous tang: Provides stability and balance.
Blade: 32-layer Damascus laminate and VG-10 stainless steel
Handle: Black Pakkawood
Blade length: 200 mm.
Blade thickness: 2 mm.
Total length: 325 mm.
Weight: 214 g.
Note: not dishwasher safe

Shun Classic is one of the flagship lines of the Kai Group (which currently also includes the Kershaw and Zero Tolerance brands), a famous Japanese industry that has been producing knives and razors since the early 1900s. It is a series of knives and kitchen accessories suitable for professionals and enthusiasts.

The Kiritsuke Shun Classic DM-0777 is a true work of art in the kitchen. The blade is made of VG MAX steel, known for its hardness of 61 (±1) HRC, which guarantees exceptional and long-lasting sharpness. The VG MAX steel core is covered with 32 layers of Damascus steel, giving the blade an unmistakable appearance and a perfect combination of stability, resistance and elasticity.

The blades of the Shun Classic series are sharpened on both sides, offering precision and ease of use. The tapered handle is made of durable pakka wood, maintaining the traditional Japanese chestnut shape. This material, enriched with fine resins, guarantees exceptional resistance to use and humidity.

The typical chestnut shape of the handle ensures a secure and ergonomic grip, thanks to the slight contouring on the right side. In addition, the continuous tang provides optimal stability and balance during use.

Main features

Use: Meat and vegetables
VG MAX steel: Hardness of 61 (±1) HRC, blade core up to the edge.
Damascus steel coating: 32 layers for a perfect combination of stability and resistance.
Double-sided sharpening: Precision and ease of use.
Pakka wood handle: Traditional Japanese chestnut shape, resistant to use and moisture.
Continuous tang: Provides stability and balance.
Blade: 32-layer Damascus laminate and VG-10 stainless steel
Handle: Black Pakkawood
Blade length: 150 mm.
Blade thickness: 2 mm.
Total length: 275 mm.
Weight: 135 g.
Note: not dishwasher safe

Shun Classic is one of the flagship lines of the Kai Group (which currently also includes the Kershaw and Zero Tolerance brands), a famous Japanese industry that has been producing knives and razors since the early 1900s. It is a series of knives and kitchen accessories suitable for professionals and enthusiasts.

The Shun Classic DM-0772 Kiritsuke is a true work of art in the kitchen. The blade is made of VG MAX steel, known for its hardness of 61 (±1) HRC, which guarantees exceptional and long-lasting sharpness. The VG MAX steel core is covered with 32 layers of Damascus steel, giving the blade an unmistakable appearance and a perfect combination of stability, resistance and elasticity.

The blades of the Shun Classic series are sharpened on both sides, offering precision and ease of use. The tapered handle is made of resistant pakka wood, maintaining the traditional Japanese chestnut shape. This material, enriched with fine resins, guarantees exceptional resistance to use and humidity.

The typical chestnut shape of the handle ensures a secure and ergonomic grip, thanks to the slight contouring on the right side. In addition, the continuous tang provides optimal stability and balance during use.

Main features
VG MAX steel: Hardness of 61 (±1) HRC, blade core up to the edge.
Damascus steel coating: 32 layers for a perfect combination of stability and resistance.
Double-sided sharpening: Precision and ease of use.
Pakka wood handle: Traditional Japanese chestnut shape, resistant to use and moisture.
Continuous tang: Provides stability and balance.

Blade: 32-layer Damascus laminate and VG-10 stainless steel

Handle: Black Pakkawood
Blade length: 90 mm.
Blade thickness: 2 mm.
Total length: 205 mm.
Weight: 66 g.
Note: not dishwasher safe

Shun Classic is one of the flagship lines of the Kai Group (which currently also includes the Kershaw and Zero Tolerance brands), a famous Japanese industry that has been producing knives and razors since the early 1900s. It is a series of knives and kitchen accessories suitable for professionals and enthusiasts.

The core of Kaname blades is made of an extremely durable VGXeos steel with a hardness of 60-62 (±1) HRC, rolled in two layers of stainless steel. The special manufacturing method ensures an incredibly thin cutting edge that reduces friction during use. This results in excellent and durable sharpness, promoting filigree, smooth and precise cuts.

To best design the handle, we combined the experiences of professionals and consumers. The result is a black-grained pakkawood handle that creates a seamless transition from the handle to the tang. The octagonal, ergonomic shape of the handle provides good control while cutting, while the knife rests securely and comfortably in the hand.

 

Blade: VGXeos rolled stainless steel with a hardness of 60/62±1 HRC
Country of manufacture: Japan
Handle: pakkawood
Blade length: 195mm.
Handle length: 130mm.
Blade thickness: 1.5mm.
Total length: 325mm.
Weight: 160g.
Care and maintenance: hand wash only - keep sharp with a fine-grained sharpening steel or sharpening stone of at least grit #3000

The core of Kaname blades is made of an extremely durable VGXeos steel with a hardness of 60-62 (±1) HRC, rolled in two layers of stainless steel. The special manufacturing method ensures an incredibly thin cutting edge that reduces friction during use. This results in excellent and durable sharpness, promoting filigree, smooth and precise cuts.

To best design the handle, we combined the experiences of professionals and consumers. The result is a black-grained pakkawood handle that creates a seamless transition from the handle to the tang. The octagonal, ergonomic shape of the handle provides good control while cutting, while the knife rests securely and comfortably in the hand.

 

Blade: VGXeos rolled stainless steel with a hardness of 60/62±1 HRC
Country of manufacture: Japan
Handle: pakkawood
Blade length: 150mm.
Handle length: 130mm.
Blade thickness: 1.5mm.
Total length: 280mm.
Weight: 134g.
Care and maintenance: wash by hand only - keep sharp with a fine-grained sharpening steel or a sharpening stone of at least grit #3000

The core of Kaname blades is made of an extremely durable VGXeos steel with a hardness of 60-62 (±1) HRC, rolled in two layers of stainless steel. The special manufacturing method ensures an incredibly thin cutting edge that reduces friction during use. This results in excellent and durable sharpness, promoting filigree, smooth and precise cuts.

To best design the handle, we combined the experiences of professionals and consumers. The result is a black-grained pakkawood handle that creates a seamless transition from the handle to the tang. The octagonal, ergonomic shape of the handle provides good control while cutting, while the knife rests securely and comfortably in the hand.

Blade: VGXeos rolled stainless steel with a hardness of 60/62±1 HRC
Country of Manufacture: Japan
Handle: pakkawood
Blade length: 120mm.
Handle Length: 130mm.
Blade thickness: 1.5mm.
Total length: 250mm.
Weight: 78g.
Care: wash by hand only
Maintenance: keep sharp with a fine-grained sharpening steel or a sharpening stone of at least grit #3000

With the two Kohen knives, the Japanese company once again demonstrates its great expertise in producing high-quality kitchen knives. The "Coreless" Damascus blade is made from VG2 and VG10 high-performance stainless steels that are forged and folded to produce 72 layers that alternate sequentially on the edge of the blade to ensure unmatched cutting and edge-holding performance.

A premium material such as pakkawood in red and black colorations was chosen for the handles. Also included in the set are two leather blade protector sheaths and an aluminum case for storing and transporting these two valuable knives safely. 

Blade: Japanese Coreless rolled stainless steel - 72 alternating layers of VG10 and VG2 at 60±2 HRC
Handle: Pakkawood
Kitchen knife blade length: 200mm.
Petty/utility knife blade length: 150mm.
Sheaths: leather, for use as blade covers
Packaging: aluminum case with warranty certificates
Edition: numbered and limited to 3000 pieces worldwide
Maintenance: hand wash only, do not wash in dishwasher

Kai Europe offers another exclusive collaboration with master-chef Tim Mälzer: Small Kiritsuke 13 The Lucky Edition.

A special edition with an opaque brown handle and a 15 cm hammered blade. The edition is limited to only 5555 pieces and each one is numbered. As such, each knife is a unique collector's item.

As with the previous limited edition, the Kiritsuke was chosen, but in a smaller size. This is a type of Japanese knife that combines the design and characteristics of a usuba and a yanagiba. The usuba is used for cutting vegetables and the yanagiba for raw fish, for example when making sashimi. As such, the kiritsuke can be used for many different tasks in the kitchen: cutting vegetables, meat and fish. The tanto inverted profile makes the tip very flexible and perfect for precision tasks. The flat blade is perfect for other cutting tasks.

The superbly sharp blade is made of VG MAX steel with a hardness of 61 (± 1) HRC and surrounded by 32-layer Damascus steel. The Damascus steel makes each knife unique. The matt handle of this special edition is, like the regular knives in the Tim Mälzer Premier collection, made of walnut wood: it is moisture-resistant thanks to the resin treatment. The chestnut shape of the handle is comfortable in the hand and provides a firm grip when using the knife. 

Blade: Damascus stainless steel VG MAX hardness of 61±1 HRC
Handle: Matt walnut wood
Blade length: 155 mm.
Handle length: 120 mm.
Blade thickness: 1.9 mm.
Total length: 285 mm.
Weight: 151 g.
Notes: not dishwasher safe - wooden presentation box

The KAI Group, based in Tokyo, boasts an almost century-old tradition in cutting and related products, famous for their excellent functionality, sharpening and durability.

Thanks to these features, KAI products are among the best in the world. The common denominator - quality and perfection - is based on the centuries-old cultural tradition of Japanese swordsmiths for samurai.

The 7200 series is the next generation professional tailoring shears. The blades are made of AUS8A stainless steel (hardness 58 HRC) and have a thickness of 3.7 mm - 4 mm.

The shears have an elegant anti-glare satin surface and the patented "duplex interlock" fastening device, which does not loosen easily. The screws are treated and tempered up to 45 HRC. The 7200 series is available in different models and was awarded the IF Design Award 2005.

• AUS8 steel hardness 58 HRC
• Total length = 250 mm
• Cutting length = 95 mm
• Weight = 214 gr.
• Excellent quality
• Made in Japan
• Lightweight and easy to handle

 

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

The KAI N5120 wire cutter is a versatile tool designed for both professional and personal use.

Its NSSWR-2 stainless steel blades have a hardness of 56±1 HRC and are fully embedded in the handles, ensuring strength and stability. 

The scissors feature a satin-finished surface, a brass tension regulator for easy adjustment, and a soft handle for maximum comfort during use.

Made of high-carbon stainless steel with vanadium, these scissors are particularly durable. They are suitable for right-handed use, making them an excellent choice for those seeking high-quality, versatile cutting tools.

Recommended use: Thread rasp.

Country of manufacture: Japan

Blade: Surgical steel 56±1 HRC

Packaging: Cardboard

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Brand: Kai 

Pack of 5 disposable razor blades to be inserted in the freehand razors, both full and broken blade and safety razors

Made in Japan.

Quantity: 1 package of 5 razor blades.

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Drop stop

DropStop® is a patented and registered trademark. DropStop® is an invention by Danish inventor Brian Vang Jensen, who came up with the idea after being involved in an embarrassing situation at a dinner party a few years ago.

How do you explain its success?

Essentially for three reasons:

• Its excellent design
• Its ease of use
• Its proven effectiveness in solving a known problem
• DropStop® encompasses all these features. Aesthetically appealing, easy to use and extremely functional, DropStop® has become a worldwide success and is used in millions of wine bottles in over 40 countries. DropStop® adapts to every type of bottle. DropStop® is a unique invention that is indispensable for all wine lovers. Drop Stop® is made of aluminium coated with food-grade PVC and therefore does not alter the taste of the wine.
• The new dropstop contains various packages with 4 different sayings:
• Wine is the poetry of the earth,
• Water divides men, wine unites them.
• Life is too short to spill great wine .
• Congrats.
• The simplicity of DropStop® solves one of the most annoying inconveniences of pouring wine. By rolling up the disc and inserting it into the neck of the bottle, the thin DropStop® thread cuts the drop perfectly, so as not to soil the tablecloth. DropStop® is made of multilayer laminate (PET and aluminium) and is fully suitable for food contact. The easy-care material allows for easy and frequent cleaning under running water and can be used without restriction for years.

Select 100 Kitchen tools

The Select 100 cooking utensils form a series of useful kitchen utensils for daily use. The Series focuses on stylish and simple equipment for easy use and clever functionality. The high quality range is an ideal addition for a range of tasks in a demanding kitchen environment.

Fruit knife with plastic knife sheath |

DH-3014 Blade 12,0 cm,

Handle 11,0 cm

Kai Japan - Fruit Knife

The Kai Fruit Knife from the Select series has a stainless blade and is a handy tool in the kitchen or on the way at the picnic.

The Kai Fruit Knife is always safely stored by the scabbard made of cherry wood.

The elegant, simple and ergonomic design of the Kai fruit knife is convincing.

The Kai fruit knife is not dishwasher safe and should always be cleaded by hand.

DG-3002, length/dimension: 9.50 cm

Select 100 Kitchen tools

The Select 100 cooking utensils form a series of useful kitchen utensils for daily use.

The Series focuses on stylish and simple equipment for easy use and clever functionality.

The high quality range is an ideal addition for a range of tasks in a demanding kitchen environment.

The Kai peeler belongs to the series Select of Kai. Its blade is place near the grip.

Thanks to its special shape the Kai peeler makes of the peeling of vegetables a real enjoyment.

The Kai peeler is made from high-grade steel.

KAI PEELER Artikel-Nr: DH-3101, length/dimension: 5 cm,

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Kai Shun professional knife bag for 3 large and 2 small knives DM-0781
The knives are blocked by a Velcro strap system that ensures perfect protection of the blades during movement.
The case is equipped with a carrying strap.

Closed dimension: 45,0x16,0x7,0 cm L / W / H - Open dimension: 45,0x43,0 L / L

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Shun Pro Sho series focuses exclusively on blades with asymmetrical sharpening, that is, traditional Japanese shapes. Due to the high quality of workmanship and materials, this series is particularly suitable for intensive professional use.

The knife's elegant design masterfully combines classic Japanese design language with Western components.

Key Features.

Use: Suhi and Sashimi (fish)
Steel: stainless steel with very high efficiency
Sharpening: asymmetrical, chisel-shaped
Wooden pakka handle: Traditional Japanese chestnut shape, resistant to use and moisture.
Continuous tang: Provides stability and balance.

Blade: SOLID AUS10A stainless steel.
Handle: Black pakkawood
Blade length: 265mm.
Blade thickness: 3mm.
Total length: 405mm.
Weight: 200g.
Maintenance: hand wash, not dishwasher safe

The Shun Pro Sho series focuses exclusively on blades with asymmetrical sharpening, i.e. traditional Japanese shapes. Due to the high quality of workmanship and materials, this series is particularly suitable for intensive professional use.

The knife's elegant design skilfully combines classic Japanese design language with Western components.

Main features

Use: ideal for processing whole fish, also used for meat and vegetables
Steel: Highly efficient stainless steel
Sharpening: Asymmetrical, chisel-shaped
Pakka wood handle: Traditional Japanese chestnut shape, resistant to wear and moisture
Continuous tang: Ensures stability and balance.

Blade: SOLID AUS10A stainless steel
Handle: Black Pakkawood
Blade length: 210mm.
Blade thickness: 3mm.
Total length: 247mm.
Weight: 276g.
Maintenance: hand wash, not dishwasher safe

The Shun Pro Sho series focuses exclusively on blades with asymmetrical sharpening, that is, traditional Japanese shapes. Due to the high quality of workmanship and materials, this series is particularly suitable for intensive professional use.

The knife's elegant design masterfully combines classic Japanese design language with Western components.

Key Features.

Use: Suhi and Sashimi (fish)
Steel: stainless steel with very high efficiency
Sharpening: asymmetrical, chisel-shaped
Wooden pakka handle: Traditional Japanese chestnut shape, resistant to use and moisture.
Continuous tang: Provides stability and balance.

Blade: SOLID AUS10A stainless steel.
Handle: Black pakkawood
Blade length: 240mm.
Blade thickness: 3mm.
Total length: 380mm.
Weight: 185g.
Maintenance: hand wash, not dishwasher safe

The Shun Pro Sho series focuses exclusively on asymmetrically sharpened blades, i.e. on traditional Japanese shapes. Thanks to the high quality of workmanship and materials, this series is particularly suitable for intensive professional use.

The elegant design of the knife skilfully combines the classic Japanese formal language with western components.

The blade of the knife is made of VG10 steel of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 165 mm.
Handle length: 120 mm.
Blade thickness: 4.5 mm.
Total length: 305 mm.
Weight: 290 g.
Notes: not dishwasher safe

Knife with asymmetrical sharpening, not suitable for left-handed people

Seki Magoroku Kinju

The Japanese filleting knives of the Seki Magoroku KK Yanagiba series are characterized by a puristic design and the octagonal handle in matt black pakka wood.

The extremely long and slender shape of the blade allows for thin and precise cuts, perfect for filleting fish. The blade of the Yanagiba series is ground on one side, made of stainless carbon steel, which meets the strict European standards and decorated with a soft and wavy line in a satin finish. The KK series combines robust quality with understated functionality.

Use: fish (sashimi and sushi)

Blade: MV 58HRC stainless steel
Country of production: Japan
Handle: in pakkawood, octagonal, with black nylon bolster
Sheath / Case: not supplied
Blade length: 270mm
Total length: 400mm
Blade thickness: 3mm
Handle length: 127mm
Weight: 280g

Maintenance: NOT dishwasher safe

Knife with asymmetrical sharpening, not suitable for left-handed people

Seki Magoroku Kinju

The Japanese filleting knives of the Seki Magoroku KK Yanagiba series are characterized by a puristic design and the octagonal handle in matt black pakka wood.

The extremely long and slender shape of the blade allows for thin and precise cuts, perfect for filleting fish. The blade of the Yanagiba series is ground on one side, made of stainless carbon steel, which meets the strict European standards and decorated with a soft and wavy line in a satin finish. The KK series combines robust quality with understated functionality.

Use: fish (sashimi and sushi)

Blade: MV 58HRC stainless steel
Country of production: Japan
Handle: in pakkawood, octagonal, with black nylon bolster
Sheath / Case: not supplied
Blade length: 300mm
Total length: 430mm
Blade thickness: 3mm
Handle length: 127mm
Weight: 300g

Maintenance: NOT dishwasher safe

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Knife with asymmetric sharpening, not suitable for left-handed people

Seki Magoroku Kinju

The kitchen knives of the Seki Magoroku Kinju series are particularly light in hand and allow a precise cut; convince with their high functionality and durability.

The typical Japanese blade shape in combination with the simple dark wood handle creates a minimalist and impromptu aesthetic.

Use: fish cleaning and preparation
Blade: Stainless Steel MV 58HRC
Country of production: Japan
Handle: in pakkawood, octagonal, with black nylon bolster
Sheath / Case: not supplied
Blade length: 180mm
Total Length: 320mm
Blade thickness: 5mm
Handle Length: 134mm
Weight: 298g

Maintenance: NOT dishwasher safe

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

Knife with asymmetric sharpening, not suitable for left-handed people

Seki Magoroku
This type of traditional Japanese knives has been produced for hundreds of years in similar forms. This series fascinates thanks to its satin blade of high-carbon steel with a hardness of about 58HRC. The handle, in the traditional chestnut shape, is made of composite wood, a wood naturally rich in oils and therefore impermeable to water.

Use: meat / fish

Blade: Stainless Steel MV 58HRC
Origin: Lama: Japan
Handle: very hard and water resistant wood and black polypropylene
Sheath: -
Blade length: 240mm
Total Length: 378mm
Blade thickness: 2.5mm
Handle Length: 134mm
Weight: 153g

* Not dishwasher safe

Knife with asymmetric sharpening, not suitable for left-handed people

Seki Magoroku Kinju

The kitchen knives of the Seki Magoroku Kinju series are particularly light in hand and allow a precise cut; convince with their high functionality and durability.

The typical Japanese blade shape in combination with the simple dark wood handle creates a minimalist and impromptu aesthetic.

Use: fish (sashimi and sushi)

Blade: Stainless Steel MV 58HRC
Country of production: Japan
Handle: in pakkawood, octagonal, with black nylon bolster
Sheath / Case: not supplied
Blade length: 180mm
Total length: 310mm
Blade thickness: 2.5mm
Handle Length: 128mm
Weight: 119g

Maintenance: NOT dishwasher safe

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Kai - Kitchen shears - DH - 6002 As a matter of fact, the kitchen scissors of this page belong to the KAI Select 100 series. This is an accessory capable of performing several different functions in your kitchen. Indeed, with this pair of scissors you can cut fins of all types of fish, open food packaging, cut herbs and much more! Therefore, it is super useful not only if you are a professional cook or simply a hobby cook. The blades of these scissors are fully made of a high-quality stainless steel, making the it super resistant to corrosion and incredibly durable. In addition, these blades have micro serrated edge, which creates a non-slip effect and adds precision especially when cutting through the difficult scaly skin of fish. It is important to add that these blades are removable, thus washing these scissors becomes easier. Furthermore, the handle is made in an ergonomic shape, which gives you a great grip while performing your cuts. The handles also are made in a larger size, allowing you to use the scissors with the best comfort. In addition, it is made with a high-quality synthetic material for better endurance.

Made in Japan. Included Stainless steel nail file made by etching provides smooth filing and easy shaping. Small sized curved blade and handle. Comes with a plastic nail catcher to catch trimmed nail. Size : 15 x 73 mm.

For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC. 

In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design. 

True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.

Shun Premier Tim Mälzer

Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 165 mm.
Handle length: 105 mm.
Blade thickness: 1.5 mm.
Total length: 275 mm.
Weight: 90 g.
Notes: not dishwasher safe

For the trend-setting Shun Premier Tim Mälzer series, Kai has developed six additional knives made from corrosion-resistant 32-layer damask steel. It is embellished with a hand-hammered surface which in Japan is known as Tsuchime, thus combining timeless aesthetic qualities with ultimate sharpness. The blades have a massive core of VG MAX steel with a hardness of 61±1 HRC. 

In analogy to the limited Anniversary Knife, great importance was attached also in this series to the knives providing optimum grip as well as extraordinary hardness. The Shun Premier Tim Mälzer series, from bread knife to santoku, provides professional cutting tools which will set new standards in the premium segment by providing exceptional performance in a timeless design. 

True to Tim Mälzer‘s premise, „A good knife not only makes work easier but also helps to make cooking to turn out well“, each of the carefully manufactured damask knives was meticulously adapted to its respective area of use by the Japanese master forgers from Seki City. Due to the particularly symmetrical shape of their walnut handle, all shapes moreover ensure a precise cutting performance for both right-handed as well as left-handed use.

Shun Premier Tim Mälzer

Blade: Damascus stainless steel VG MAX hardness of 61 ± 1 HRC
Handle: Walnut wood
Blade length: 165 mm.
Handle length: 110 mm.
Blade thickness: - mm.
Total length: 290 mm.
Weight: 148 g.
Notes: not dishwasher safe