Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 420HC stainless steel
Handle: Phenolic resin
Blade length: 102mm.
Blade thickness: 3.5mm.
Total length: 209mm.
Weight: 122g.
Sheath: black leather
Packaging: cardboard box with Buck logos
Notes: -

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

Black Fighter - 02-1271 - knife
Blade: 1095 Carbon Steel 56 / 58HRC teflon
Handle: Kraton
Blade length: 200 mm.
Total length: 323 mm.
Blade thickness: 3.5 mm.
Length Closed: -
Weight: 350g.
Closed: -
Sheath: hard plastic
Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

Intended use: Military

Type of production: industrial
Blade: in steel D2
Blade treatment: teflon coating
Lama production: USA
Handle: Kraton
Blade length: 178mm.
Blade thickness: 4mm.
Length closed: -
Total length: 305mm.
Balancing: -
Weight: 350g.
Closure: -
Clip: -
Sheath: in kydex
Note: -

Intended use: tactical / military

Type of production: industrial
Blade: full tang in stainless steel AUS-8 57 / 59HRC
Blade treatment: nitriding
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: -
Total length: 145mm.
Balancing: -
Weight: 78g.
Closure: -
Clip: -
Sheath: ABS with clip
Note: -

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g.
Closing: -
Sheath: in kydex
Note: -
Send feedback
History
Saved
Community

Purpose: Sport / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 236mm.
Blade thickness: 4mm.
Total length: 360mm.
Balancing: set back - 2 cm. from the lower guard branch
Weight: 412g.
Closing: -
Clip: -
Sheath: in kydex
Note: -
Send feedback
History
Saved

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 130 mm.
Total length: 235 mm.
Blade Thickness: 3.5 mm.
Length Closed: -
Weight: 250g.
Closing: -
Sheath: Leather
Notes: -

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -