Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: USA
Blade: Steel CPM-MagnaCut
Blade finish: Stonewashed
Handle: Titanium and Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 129g.
Closure: Frame Lock
Clip: Removable, Multiposition, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT ball bearing opening system

In the late 1980s, Walter Fortunato designed and built the stopper sealing system that has made Waf famous throughout the world. The Block Waf System© still represents the most ingenious invention for preserving the precious characteristics of newly uncorked sparkling wines over time. The patent, applied in many items in the stoppers line, follows Pascal's principle that pressure exerted on a fluid is transmitted in all directions with equal intensity. By applying Pascal's principle to the bottle, the elastic teat goes to adhere to the inner wall of the mouthpiece. The head gasket with which the teat is fitted tends to rest against the top edge of the bottle, creating an initial obstacle to the escape of carbon dioxide. The carbon dioxide, again due to Pascal's principle, enters the teat through the hole below and as the pressure increases it goes to expand against the glass wall thus creating a state of overpressure inside. The external fixing bracket is designed to counteract the vertical thrust that the stopper receives and thus ensures its tightness, which has been tested up to 6 atmospheres.

Equipped with -Block WAF SYSTEM © with certified seal over 6 ATM.

MATERIAL: High-carbon chrome-plated steel. Plastics certified for food contact

COLOR: Gold

SIZE: 4.5 x 4.0 x 6.2 cm

WASH: By hand, do not use abrasive sponges and/or detergents.

As an elegant and refined alternative to the original 0450, Zero Tolerance presents the 0450BLUCF model with that extra touch.

The CPM MagnaCut blade steel represents exceptional toughness, wear resistance, and unparalleled edge retention.

The classic stonewash finish of the blade with ball bearings highlights the robust side of the Frame Lock Folder and complements the blue marbled carbon front handles and the titanium handle area on the back.

With a reversible clip for pocket carry and a lanyard hole. Made in the USA.

Intended use: EDC/Sport/Collection

Production type: Industrial
Blade production: USA
Blade: CPM Magnacut steel
Blade treatment: Stone Wash
Handle: Carbon Fiber and Titanium
Blade length: 82mm
Blade thickness: 3mm
Closed length: 111mm
Overall length: 187mm
Weight: 68g
Locking mechanism: Frame Lock
Clip: Removable, multiposition, stainless steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings

Intended Use: Tactical / Sporting

Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market only

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

ONE-LIGHT is a portable and rechargeable "outdoor, in-door" LED Lampshade Lamp that can be easily housed on the neck of a bottle.

NEW 2023

On the coffee table of a restaurant or bar, in a living room, in a study where it illuminates areas of dimness, ONE-LIGHT can become a piece of furniture that is impossible to resist.

Thanks to its simple and modern design, it fits perfectly into any environment.

The body is made of Veroglas technopolymer, in as many as 13 colors to suit all tastes, and features a raised surface decoration reminiscent of the surface of the moon.

At the bottom, it has a rubber ring that fits the bottle rim.

The two-intensity, waterproof LED light source provides up to 24 hours at medium light intensity, up to 10 hours at maximum light intensity.

USB cable included for charging the lamp.

ONE-LIGHT conveniently recharges with any battery charger.

Charging time: 5-6 hours.

DIMENSIONS: Ø 103 mm x 88 mm x Ø 77 mm

Salter - Kitchen scale with liquid measurements and clock mode

- No need for measuring containers, just put dry or fluid ingredients in a bowl and use the special conversion button to change from Kg/Lb to ml/fl.oz.

- 24/12 hour clock mode

- innovative transparent display

- durable stainless steel bowl

Salter - Electronic kitchen scale with bowl

Electronic kitchen scale with rotary display that can be used with bowl.

• Stainless steel bowl with large capacity 1.25 L.
• Display with easy-to-read 13 mm digits.
• Add and weigh function.
• Automatic and manual power off.
• Angled rotary display.
• Weight capacity from 1 g to 5 kg.

Button batteries not included.

Intended Use: Tactical / Sporting

Type of production: Industrial
Country of manufacture: USA
Blade: full tang in CPM-3V carbon steel
Blade treatment: Microbead blasting and Cerakote protective treatment
Handle: G10 OD Green with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos.
Notes: -

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: stone washed
Handle: Bronze and Titanium
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thickness when closed: 11.1mm.
Weight: 80g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings via Carson Flipper system - Limited Edition "Factory Special Series"

WAF Corkscrews

The elegance of a gesture that can be found in everyday life as well as on important occasions.

Corking a bottle represents the encounter between the culture of drinking and the importance of a ritual.

Designed for the first patent in 1965, Waf corkscrews have reached an increasingly sophisticated level of technology over time, so much so that they are now considered a classic Italian wine article. An important itinerary, where the evolution of an object is realised in a gesture: uncorking a bottle of good wine with simplicity and safety.

Waf corkscrews are the only ones of their kind to have been designed and manufactured with these factors in mind, as well as for easy and safe cork extraction.

Extraction takes place vertically and progressively without any possibility of damaging the cork itself or leaving any residue.

Corkscrew SENIOR 3B

Each piece of this corkscrew is worked individually with care and perfectly reflects the quality level reached by Waf in metalworking. The Senior corkscrew is the most coveted gift par excellence, the absolute protagonist of conviviality movements, it allows quick and safe uncorking with one hand. Invented by Walter Fortunato, founder of the company.

FEATURES:

Material : Bronze-plated aluminium alloy 

Dimensions : 18.0 x 5.5 x 23.0 cm

Weight: 564 g.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Ilsa - Coffee Maker Carmencita Pop alum. 6 cups - INDUCTION

The first item produced under the ILSA brand is the iconic Neapolitan coffee maker in 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are returning to coffee after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle for use on all hobs

Ilsa - Caffettiera Carmencita Pop aluminium 3 cups - induction

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first item produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of a regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its worldwide recognised Lavazza brand.

Ilsa - Carmencita Pop Aluminium 2 cups coffee maker - induction

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first item produced under the ILSA brand is the iconic Caffettiera Napoletana in 99% pure aluminium, which has become the symbol of a regained wealth on the tables of Italians who are returning to drinking coffee after the sacrifices imposed by the world war.

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on all hobs and is perfect for an important gift thanks to its Lavazza brand, recognised throughout the world.

Ilsa - Caffettiera Carmencita Pop aluminium 1 cup

The historic Caffettiera Napoletana is still one of the best known symbols of Italian style in the world.

The first article produced under the ILSA brand is the iconic Caffettiera Napoletana made of 99% pure aluminium, which has become a symbol of regained wealth on the tables of Italians who are drinking coffee again after the sacrifices imposed by the world war. 

Thanks to the collaboration with the historic Turin-based company Lavazza, CARMENCITA, the famous coffee maker designed by architect Marco Zanuso in 1979, is back.

Retaining the design and features that have made it a timeless icon, Carmencita is made for the first time in aluminium, to fully enhance the taste of coffee, in keeping with Italian tradition.

The lightness of the satin-finished aluminium enhances its elegant lines, while the colourful details with their captivating design make it modern and in step with the times.

The Carmencita is not only a coffee maker but also a design element, a perfect synthesis between aesthetics and functionality.

The Ilsa Carmencita Lavazza POP coffee maker in aluminium with blue plastic knob and handle can be used on gas, glass-ceramic and electric hobs, perfect for an important gift thanks to its worldwide recognised Lavazza brand.

The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.

Before the moka, which has speeded up the preparation of coffee, the famous black drink was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.

NEAPOLITAN COFFEE POT 6 CUPS IN ALUMINIUM

The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.

The procedure then consists of the following steps:

1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.

2) Screw the filter on top of the tank.

3) Fill the perforated tank with water, always up to the indicated limit.

4) Insert the hollow tank into the perforated tank.

5) Add the body with the cap and screw in.

6) Place on the side with the water tank.

7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.

8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.

The historic Caffettiera Napoletana is still one of the best-known symbols of Italian style in the world.

Before the moka, which speeded up the preparation of coffee, the famous black beverage was prepared with the Neapolitan coffee pot, first made of copper and then of steel or aluminium. The method of preparation is not very different from that of filter coffee, but a series of particularities make it a unique product of its kind.

CAFFETTIERA NAPOLETANA  3 CUPS IN ALUMINIUM

The Neapolitan is a type of coffee maker that, unlike the mocha, does not use the pressure generated by steam to push the water towards the coffee, but only the force of gravity. How to use the Neapolitan coffee maker It is necessary to explain in detail the use of this coffee maker because, as we said, it requires a different procedure compared to the now common coffee makers. The main reason is that the cuccumella is formed by different elements that are: the hollow tank where you put the coffee powder, the perforated tank that holds the water and the hollow tank, the coffee filter to be screwed on top of the hollow tank, the coffee pot from which the ready coffee comes out and the lid.

The procedure then consists of the following steps:

1) Fill the hollow tank with coffee powder, reaching the indicated limit and without crushing the powder.

2) Screw the filter on top of the tank.

3) Fill the perforated tank with water, always up to the indicated limit.

4) Insert the hollow tank into the perforated tank.

5) Add the body with the cap and screw it on.

6) Place on the side with the water tank.

7) When the water starts coming out of the hole in the tank, turn off the flame and turn the Neapolitan coffee maker. To perform this operation it is important to have a firm grip, protect yourself with potholders to avoid burning yourself and turn the cuccumella upside down in one go.

8) Check the coffee tank and when there is no more water, unscrew the other tank, place the lid on it and pour the coffee.

Based on the award-winning ZT 0999, the 0990 simplifies this legendary design. Despite the skeletonized structure, this ZT is reliable and robust thanks to the steel structure.

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber and steel
Blade length: 83mm.
Blade thickness: 3mm.
Closed length: 114mm.
Total length: 193mm.
Thick when closed: 114mm.
Weight: 82g.
Closure: liner lock
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on ball bearings - Manual KVT ball bearings

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Black carbon fiber with aluminum spacers
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 126mm.
Total length: 206mm.
Thick when closed: 112mm.
Weight: 82g.
Closure: Sub Framelock in hardened steel
Clip: Removable, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Tuned Detent System (TDS ™) opening system

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.

Traditional pocket knife with micarta handle - knife made in Germany in the 90s.

Intended use: Collection

Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 81gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -

Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.

Traditional pocket knife with wooden handle - knife made in Germany in the 1990s.

Intended use: Collection

Blade: stainless steel
Production Lama Germany
Handle: nickel silver and wood
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 82gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and Carbon Fiber
Blade length: 89mm.
Blade thickness: 3.1mm.
Length closed: 117mm.
Total length: 210mm.
Weight: 68g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Notes: New Tuned Detent System (TDS) which allows easy knife opening, even by exerting pressure on the titanium frame lock

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper system

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade finish: Stonewashed
Handle: Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 241mm.
Weight: 196g.
Closing system: Frame Lock
Clip: removable and reversible, in stainless steel with Black PVD treatment
Opening system: Carson Flipper type on KVT ball bearings
Packaging: cardboard box with Zero Tolerance logos
Note: -

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: EDC / Gentleman

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with anodized aluminum spacer and stainless steel folders
Blade length: 66mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 157mm.
Thick when closed: 10mm
Weight: 51g.
Closure: SlipJoint
Clip: -
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed
Handle: Carbon Fiber and Titanium with anodized spacers
Blade length: 49mm.
Blade thickness: 3.1mm.
Length closed: 76mm.
Total length: 122mm.
Thick when closed: 11.1mm.
Weight: 50g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings using the Carson Flipper system

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)