Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

The Alexander wine set on wooden plank offers a vintage and refined touch to your tasting experience. 
Consisting of three essential pieces, this set is perfect for wine enthusiasts looking for style and practicality.
The corkscrew included in the set is a sturdy, high-quality tool designed to uncork wine bottles with ease and precision. 
The cork stopper ensures optimal preservation of the opened wine, preserving its flavor and aroma.
The natural wood plank serves as an elegant stand for the corkscrew and stopper. 
The wood adds a touch of warmth and tradition to the set, giving it a timeless appeal.
Alexander's vintage design makes it not only a practical set for serving wine, but also a decorative design object. 
It is the perfect gift for someone who loves wine and appreciates classic and sophisticated aesthetics.

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Alexander - Nutcracker - Made in Italy - VINTAGE

Alexander - Maniago cutlery makers from 1873 -Made of stainless steel with a black resin handle.

Five steps to make a quality product.

No fewer than five careful, time-consuming and expensive processing steps are required to make Alexander's handcrafted products from rod steel: 

from stainless steel rod

coining down 

profile and interior blanking

roughing and bending 

tempering 

In addition to the above steps, there are the normal finishing operations (mirroring, handle machining).

Specifiche: 

Marca: Alexander 

Total length: 16.5 cm 

Material: Stainless steel 

Made in Italy

Alexander - Forged Hatchet 20 cm - K20 - Made in Italy - VINTAGE

Alexander - Knifemakers in Maniago, 1873

Made of stainless steel with a black resin handle.

Five steps to make a quality product.

No less than five careful, time-consuming and expensive processing steps are required to make Alexander handcrafted products from rod steel: -

from glowing bars of stainless steel

drop coining

shearing of the profile and interior -roughening and bending

tempering

To the above steps are added the normal finishing operations ( mirroring, handle machining). Knife blades are sharp as they are hand sharpened.

Specifications:

Brand: Alexander

Blade length: 20 cm

Total length: 32.5 cm

Material: Stainless steel

Series: Apollo

Made in Italy

Alexander - K23 - Forged bread knife 23 cm - Made in Italy

Alexander - Knife makers in Maniago 1873 -Made of stainless steel, forged in one piece with a black resin handle.

Five steps to make a quality product.

Five careful, time-consuming and expensive processing steps are required to make Alexander's handcrafted products from rod steel:

forged from stainless steel hot rods

hot-burning -profile and interior grinding

roughing and bending

tempering

In addition to the above steps, there are the normal finishing operations (mirroring, handle machining). Knife blades are sharpened by hand.

Specifications:

Brand: Alexander.

Total length: 23 cm.

Material: Stainless steel.

Series: Apollo.

Made in Italy.

Alexander - K26 - Forged curved fork - Made in Italy

Alexander - Knifemakers in Maniago 1873

Made of stainless steel, forged in one piece with a black resin handle.

Five steps to make a quality product.

Five careful, time-consuming and expensive processing steps are required to make

Alexander's handcrafted products from rod steel:

forged from stainless steel hot rods

hot-burning

profile and interior grinding

roughing and bending

tempering

In addition to the above steps, there are the normal finishing operations (mirroring, handle machining).

Specifications:

Brand: Alexander.

Total length: 26 cm.

Material: Stainless steel.

Series: Apollo.

Made in Italy.

Alexander - K2 - forged tin foil lifter - Made in Italy

Made of stainless steel, forged one-piece with black resin handle.

Specifications:

Brand: Alexander

Total length: 17.5 cm.

Material: stainless steel.

Series: Apollo

Made in Italy

Alexander - Set of 6 forged table spoons - White - Last one - Made in Italy

Five steps to make a quality product.

To make the steel from the rod for Alexander cutlery, no less than five careful, time-consuming and expensive processing stages are required: 

forging from hot bars of stainless steel 

hot coining 

shearing of profile and interior 

roughing and bending 

tempering. In addition to the above steps, there are the normal finishing operations (mirroring, handle machining). The spoon is sober and slender in shape, with respect for functionality. Handcrafted forged cutlery in stainless steel, with a black bakelite handle polished by hand with mirror blades.

Specifications

Brand Alexander

Total length 20 cm

Handle Material Synthetic.

Folkroll - Engraved Wooden Cookie Stamp - Assorted Designs

Fantastic decorative wooden stamp

to make your biscuits special.

A practical, easy-to-use tool that will give you a unique result!

Involve the kids in the kitchen and together make original homemade biscuits with funny stamps!

Roll out the dough, decorate it with the TIMBRO.

Ideal for decorating biscuits, cakes, sugar paste, marzipan.

You can use it artistically to make creations in clay, salt dough and modelling pastes.

It is not only for pastry lovers, but also an excellent gift for any occasion.

Also a great idea for original wedding favours.

Wooden biscuit stamps!

Roll out the shortcrust pastry to a thickness of 5 mm, decorate with the Reindeer and Christmas Tree stamp or other stamp, and cut into any shape you like.

Place the biscuits in the fridge for at least 20 minutes before baking.

The stamp is made of laser engraved wood, so we recommend you wash it by hand with warm water and let it air dry.

Size: 7 x 5 cm or round 5 cm.

Folkroll - Engraved wooden rolling pin - Junior Rolling Pin

Fantastic decorative rolling pin to make your biscuits special.

A practical tool, easy to use and that will give you a unique result! Involve the kids in the kitchen and together make original homemade biscuits with cute little machines!

Roll out the dough, decorate it with the rolling pin and carve the shapes of your choice. Ideal for decorating biscuits, cakes, sugar paste, marzipan.

You can use it artistically to make creations in clay, salt dough and modelling pastes.

It is not only for pastry lovers, but also an excellent gift for any occasion.

It is also an excellent idea for original wedding favours.

Each roller is made of solid beech wood and edible oil to prolong its quality, thus guaranteed for food use. It is natural and ecological.

After each use, wash by hand with warm water, without soaking and without detergents. Rolling pin length with handles: 23 cm

Decorated roller length: 12 cm

Rolling pin diameter: 4.5 cm

Material: Beech wood.

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

Alexander - Oyster Opener Set - Kitchen

The Alexander Oyster Set Box Set is ideal for the Chef, the lover of elegant cuisine and for those who offer gourmet dinners.

Using a stainless steel oyster opener set allows for effortless opening of succulent shellfish, with the specially designed oyster knife. The Professional Oyster Opener is convenient and designer; the forged spoons complete a complete and luxurious Oyster Set.

This oyster opener set consists of:

• an oyster opener knife
• 4 oyster spoons

Alexander - Walnut chopping board with roast support and forged knife Alexander

Cutlers in Maniago of 1873 The Alexander Roast Apollo Knife is an excellent Professional Roast Knife, chosen by amateur and professional chefs. The blade of a good roast knife must be long, flexible and sharp enough to run smoothly over the meat. But above all the blade must be smooth and not serrated: in this way it is possible to cut the meat easily, without tearing it and without "squeezing it"  thus enhancing the taste.

Five steps to make a quality product. To make Alexander handcrafted products from steel rods, five careful and long and costly processing phases are required: 

forged from stainless steel incandescent bars 

hot coining 

shearing of the profile and the interior 

roughing and bending

tempera.

The normal finishing operations (mirroring, working of the handle) are added to the aforementioned phases. The knife blades are sharp as they are sharpened by hand.

Crustacean Set 3 pieces

The Alexander Crustacean Set is a luxurious item that combines the elegance of wood with the strength of stainless steel in the excellence of Italian design.

Perfect for the lover of gourmet cuisine, the crustacean cutlery includes.

- the Lobster Stiletto (for effortlessly digging inside the claws)

- the Small Spoon (ideal for oysters and shellfish)

- the Oyster Opener Knife.

Enjoying the deliciousness of shellfish and the tender meat of lobster, crab and lobster is sometimes difficult because of shells and claws, Using the appropriate shellfish cutlery adds convenience to flavor and deliciousness.

Alexander - Filò - The charcuterie slicer - Forged oiled knife with cherrywood handle - VINTAGE

Alexander - Knifemakers in Maniago 1873

Five steps to make a quality product. No less than five careful, dismal and expensive processing steps are required to make Alexander handcrafted products from rod steel: 

forging from glowing bars of stainless steel 

hot coining 

shearing of the profile and interior 

roughing and bending 

tempering.

In addition to the above steps are the normal finishing operations ( mirroring, handle machining). Knife blades are sharp as they are hand sharpened.

The handle is made of buffalo horn.

The knife comes with a magnetized stand that can be hung from walnut wood.

Measurements:

Knife blade: 30 cm.

mirror-polished.

Total length: 43 cm.

Alexander - Walnut box with 4 kitchen knives

Fabulous chest of drawers in blockboard of walnut combined with a collection of Nettuno knives comprising a roast knife, kitchen knife, bread knife, ham knife.

The knives all have triple rivets on the handle that make them super-reliable.

Alexander - Cutlers in Maniago of 1873

The Alexander Nettuno Kitchen Knife is the perfect mix of professional kitchen knives and Chef knives, without forgetting the design.

Five steps to make a quality product.

To make Alexander handcrafted products from steel rods, five careful and long and costly processing phases are required: 

forged from stainless steel incandescent bars 

hot coining

shearing of the profile and the interior

roughing and bending 

tempera.

The normal finishing operations (mirroring, working of the handle) are added to the aforementioned phases.

knife blades are sharp as they are sharpened by hand.

The handle is in wood.

Drawer measures: 39x29x5 cm.

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

Alexander - Walnut chest of drawers with 7 knives / kitchen accessories 

VINTAGE

Fabulous walnut plank chest of drawers combined with a collection of Neptune knives including

Roast knife,

Kitchen knife,

Bread knife,

ham knife,

Vegetable knife (or paring knife), knife sharpener and fork.

Knives all have triple riveting on the handle, making them super-reliable.

Alexander - Knife makers in Maniago from 1873 The Alexander Neptune Kitchen Knife is the perfect mix between professional kitchen knives and chef's knives, without forgetting design.

Five steps to make a quality product.

Five careful, time-consuming and expensive processing steps are required to make Alexander's handcrafted products from rod steel: 

forging from stainless steel hot rods 

hot coining 

profile and interior blanking 

roughing and bending 

tempering. In addition to the above steps, there are the normal finishing operations (mirroring, machining of the handle).

The knife blades are sharpened by hand.

The handle is made of wood

Drawer dimensions: 39x29x5 cm.

Alexander - Set of 6 forged table forks - Last ONE - Made in Italy

Five steps to make a quality product.

To make the steel from the rods for Alexander cutlery, five careful, time-consuming and expensive processing stages are required:

forging from hot bars of stainless steel

hot coining

shearing of profile and interior 

roughing and bending  tempering.

In addition to the above-mentioned phases, there are the normal finishing operations (mirroring, machining of the fork tines, machining of the handle). The tines of the forks, unlike those of stamped cutlery, are thin, hand-turned, close-set and pointed. Handcrafted forged cutlery in stainless steel, with a black bakelite handle polished by hand with mirror blades.

Specifications

Brand Alexander

Total length 20,50 cm

Material Handle synthetic

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Alexander - Filò - The panettone slicer - Forged knife with horn handle - VINTAGE

Five steps to achieve a quality product. In order to make Alexander's handicraft products from steel, there are five steps of careful processing, lughe and expensive: 

Forged by incandescent bars of stainless steel 

hot coiling 

trimming the profile and the interior

baking and folding

tempera.

In addition to the above mentioned steps, normal finishing operations (mirroring, handle machining) are added.

Knife blades are sharp as sharpened by hand. Manicure is in buffalo horn.

The knife is accompanied by a magnetised support that can be hung in walnut wood.

Measures: knife knife 22cm.

Polished mirror.

Total cm. 34.

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -

Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.

Sheath: Cordura desert
Notes: extra pair of grips for the handle color desert

Ka-Bar BK & T - Becker Crewman BKR10 - knife

Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .

Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.

Ka-Bar - Kukri Machete - 02-1249 - knife

Intended use: military / sports
Type of production: industrial
Blade: 1095 carbon steel - HRC 56-58
Treatment Blade: Teflon
Handle: Kraton ® G
Blade length: 290mm.
Blade Thickness: 4mm.
Length closed: -
Total length: 430mm.
Balance: -
Weight: 600g.
Closing: -
Clip: -
Sheath: tactical leather and Cordura

Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

Black Fighter - 02-1271 - knife
Blade: 1095 Carbon Steel 56 / 58HRC teflon
Handle: Kraton
Blade length: 200 mm.
Total length: 323 mm.
Blade thickness: 3.5 mm.
Length Closed: -
Weight: 350g.
Closed: -
Sheath: hard plastic
Notes: -

Ka-Bar - USMC Short - 02-1252 - knife

Intended use: Tactical / Military

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -

Intended Use: Tactical / Military

Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -

Intended use: Utility / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: Kraton G
Blade length: 150mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 305mm.
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: Kydex and cordura
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.

Destination of use: collection

Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative edition

Intended use: Military

Type of production: industrial
Blade: in steel D2
Blade treatment: teflon coating
Lama production: USA
Handle: Kraton
Blade length: 178mm.
Blade thickness: 4mm.
Length closed: -
Total length: 305mm.
Balancing: -
Weight: 350g.
Closure: -
Clip: -
Sheath: in kydex
Note: -