Last up date

Ka-Bar - 1217 - Full Set 1991 50th Pearl Harbour Anniversary Model 02-1241 - PRIVATE COLLECTION - knife

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: Like new, never taken out of its box. 
* Commercially available: Discontinued, 1991 model
* Sharpening: Factory.
* Marks on blade: /
* Marks on handle: /
* Box: Present, original, with “50th Anniversary Pearl Harbor” logos.
* Scabbard: Present
* Manuals, Certificates and Warranties: Present, complete set.
* Checked and Certified by our in-house laboratory

This Ka-Bar 1217, made in 1991, is a commemorative knife designed to mark the 50th anniversary of the Japanese attack on Pearl Harbor on December 7, 1941. This surprise attack, conducted by the Imperial Japanese Navy, aimed to destroy the U.S. Pacific Fleet and prevent a rapid response to Japanese expansion. The raid claimed the lives of about 2,400 people, including military personnel and civilians, and led the United States to enter World War II, declaring war on Japan the following day.

The Ka-Bar 1217, with its high-carbon steel blade and leather ring handle, has the same design as the legendary Ka-Bar knife used by U.S. soldiers during the conflict. The blade is engraved with the 50th anniversary logo and a symbolic image of Pearl Harbor, making the knife a collector's item and a tribute to the historical memory of the event. The Ka-Bar 1217 is not just a tool but a mark of honor and respect for the victims of the attack and the heroes who contributed to the victory of the United States during World War II.

Unlike the standard models, here we have engraving from the right side of the blade, hand-molded leather washers with an aged look, and even the scabbard is made like the 1940s models, with darker leather and steel staple points in addition to the traditional contrasting cream-colored stitching.

Intended Use: Tactical/Military

Blade: 1095 56/58HRC carbon steel
Handle: hand-molded leather rings with aged appearance
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 290mm.
Balance: set back - 1cm. from the lower guard branch
Weight: 305g.
Sheath: leather, with contrasting stitching and steel staple points
Notes: very rare 1991 commemorative edition for the 50th anniversary of the attack on Pearl Harbor

KNIFE FROM A PRIVATE COLLECTION
* Type: Knife previously purchased and withdrawn from a private collection
* Condition: Like new, never used, never removed from the original packaging, and never placed in its sheath
* Commercial availability: Hard to find
* Edge: Factory sharpened
* Blade marks: None
* Handle marks: None
* Box: Nylon pouch with zipper, with Randall Knives logos
* Sheath: Perfect, never used, in oiled leather
* Manuals, Certificates, and Warranties: Original warranty sheet
Inspected and certified by our internal laboratory

Drop-point hunting knife, excellent for skinning and as a light all-around utility. The handle construction recalls a design from the 1930s. Thumb grooves and the upper part of the guard are shaped for thumb placement. The model features multiple customizations compared to the standard model, such as the single brass guard and pommel, handle in Desert Ironwood and leather, and oiled leather sheath.

Intended use: hunting / light utility

Production type: Handcrafted
Country of production: Orlando, Florida, USA
Blade: high-carbon steel
Blade finish: satin finish
Handle: Desert Ironwood and leather rings, brass guard, and pommel
Blade length: 132mm.
Blade thickness: 4.5mm.
Total length: 245mm.
Weight: 270g.
Sheath: oiled brown leather, with belt loop, front button pocket, and sharpening stone
Notes: knife previously purchased, withdrawn from private collection, absolutely like new - provided with Randall Knives zippered nylon pouch and paper warranty

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

The Model 26 Pathfinder is an excellent lightweight skinning and outdoor knife. The blade design favours both cutting and pointing work. This knife has become one of the most popular small hunting knives.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Good overall condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: Slight on the guard, the deer part is parts as new
* Packaging: -
* Scabbard: Original, leather, in good condition, some marks on the front
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Deerskin
Blade length: 150mm.
Blade thickness: 4mm.
Total length: 215mm.
Balance: set back about 2cm from the guard
Weight: 124g. (206g. scabbard included)
Sheath: brown leather with belt loop
Notes: -

Drip.it+ bottle drainer

Length: 37.5cm - 56.5cm (extendable)

Width: 10.5cm

Weight: 358g

Stainless steel insert included

Material: silicone + stainless steel

Inventor: Susanne Richter (SanniShoo)

Cleaning likes to decorate... Everyday life around the sink.

drip.it offers the ideal solution for various ‘draining scenarios’. The stainless steel insert makes it the perfect mobile and easily stowable draining station for almost all types of reusable bottles. Whether glass bottles, modern thermo bottles or baby bottles.

Heat-resistant silicone rings protect the bottles from scratches. Up to three bottles can be drained at the same time with drip.it+. There is also space for bottle caps, brushes, sponges etc. on an extra shelf.

Freshly washed salad or cooked pasta can also be easily drained in the sieve (sieb.up) with the help of drip.it+. -drip.it+ is extendable and therefore fits perfectly on any sink.

This makes it ideal for use as a flexible colander holder for draining washed or cooked food over the sink. Fewer germs on the sink thanks to better drying bottles, dishcloths, sponges and brushes. A simple idea, but a real jack-of-all-trades that can do a lot.

The Model 16 was designed to meet the demand for an almost indestructible multi-purpose knife, including intensive use in salt water (careful cleaning and maintenance is however recommended). A special wax-impregnated sheath is included.

7″ (17.8cm) stainless steel blade with 6.5mm thickness. The top of the blade is slightly serrated to allow easy thumb placement. Black Micarta handle. Extra-heavy 7/8″ (2.2cm) wide tang that extends through a channel in the handle, securely fixed with epoxy. 

KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased, manufactured in 2023
* Condition: Very good condition, like new
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in very good condition
* Manuals, Certificates and Warranties: - - * Checked and Certified by our in-house laboratory.
* Checked and certified by our in-house laboratory

Intended use: utility

Type of production: handcrafted
Country of manufacture: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: Micarta
Blade length: 178mm.
Blade thickness: 6.5mm.
Total length: 297mm.
Balance: on the guard
Weight: 362g. (522g. including scabbard)
Sheath: Brown leather with belt loop
Notes: -

Enjoy your favorite beverages always chilled with the FREEZE™ Tumbler from HOST®. 

Use:

- Place the FREEZE™ Tumbler in the freezer for at least 2 hours.
- Pour in your favorite beverage and enjoy it immediately!

Features:

- The gel inside the double-walled chamber freezes, keeping your beverage cold longer.
- Double-wall design and cooling gel provide effective cold retention.
- Ideal for iced tea, carbonated soft drinks, iced coffee and other beverages. Maintains temperature between 43 and 53 degrees Fahrenheit.
- Made of BPA-free plastic with an insulating silicone band for a comfortable grip.
- Each cup can comfortably hold 16 ounces (473ml)

Accessories included: Lid and straw for a convenient and clean drinking experience.

Washing: Hand wash only to ensure product longevity.

Freezing tip: Place the FREEZE™ Tumbler upside down in the freezer for 2 hours to allow the gel to spread and freeze evenly.

The Model 27 is an ideal all-purpose sports knife. This knife has a stainless steel blade, 5mm blade thickness and 147mm length with concealed tang construction. The handle has nickel silver guard and pommel and a leather and walnut wood ring handle with black micarta and nickel silver spacers. 

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Excellent condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: made of leather and walnut wood rings with through-guard and nickel silver tang
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 262mm.
Balance: backward
Weight: 230g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Randall Made Knives' Model 11 is the original drop-point blade. Designed in 1952 by Alaskan guide Tommy Thompson it is designed for skinning large prey, has the tip lowered below the top of the blade to avoid cutting too deeply into skins when using the tip first.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably produced in the late 1990s.
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, "Type A," in very good condition.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: hunting

Type of production: handcrafted
Country of production: USA
Blade: stainless steel 440B
Blade finish: satin
Handle: ergonomic, walnut wood with through-guard and brass tang
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 245mm.
Balance: backward
Weight: 290g.
Sheath: brown leather with belt loop and sharpening stone
Notes: vintage knife, late 1990s, previously purchased, withdrawn from private collection

Intended use: Tactical / EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -

Intended Use: Bushcraft / Outdoor

Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Coltelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.

The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.

KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Host - Set of 2 freeze glasses MARGARITA - REFRIGERATORS

PRODUCTS FOR COCKTAILS HOST

The love for innovative design applied to the world of wine is Host's guiding star. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready.

Just pour and enjoy the well-deserved refreshment! The Freeze margarita glass is ideal for enjoying your favourite cocktail: kept in the freezer for at least two hours, it keeps it at a temperature of between 6°C and 11°C; if you keep it in the fridge it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel which cools down if the glasses are placed back in the fridge. This ensures that the cocktail is at the right temperature for perfect enjoyment, especially in the warmer seasons.

An original idea that can prove to be very valuable in case of last minute dinners, or for the eternally careless who forget to refrigerate bottles of fine wine in time.

Pack of 2 glasses in 355ml capacity.

Host - Set of 2 freeze glasses MARTINI - REFRIGERATORS

PRODUCTS FOR COCKTAILS HOST

The love for innovative design applied to the world of wine is Host's guiding star. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready. Just pour and enjoy the well-deserved refreshment! The Freeze martini glass is ideal for enjoying your favourite cocktail: kept in the freezer for at least two hours, it keeps it at a temperature of between 6°C and 11°C; if you keep it in the fridge it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel that cools if the glasses are placed back in the fridge. This ensures that the cocktail is at the right temperature for perfect enjoyment, especially in the warmer seasons. An original idea that can prove to be very valuable in case of last minute dinners, or for the eternally careless who forget to refrigerate bottles of fine wine in time.

Pack of 2 glasses in 260ml capacity

Folkroll - Engraved Wooden Cookie Stamp - Assorted Designs

Fantastic decorative wooden stamp

to make your biscuits special.

A practical, easy-to-use tool that will give you a unique result!

Involve the kids in the kitchen and together make original homemade biscuits with funny stamps!

Roll out the dough, decorate it with the TIMBRO.

Ideal for decorating biscuits, cakes, sugar paste, marzipan.

You can use it artistically to make creations in clay, salt dough and modelling pastes.

It is not only for pastry lovers, but also an excellent gift for any occasion.

Also a great idea for original wedding favours.

Wooden biscuit stamps!

Roll out the shortcrust pastry to a thickness of 5 mm, decorate with the Reindeer and Christmas Tree stamp or other stamp, and cut into any shape you like.

Place the biscuits in the fridge for at least 20 minutes before baking.

The stamp is made of laser engraved wood, so we recommend you wash it by hand with warm water and let it air dry.

Size: 7 x 5 cm or round 5 cm.

Folkroll - Engraved wooden rolling pin - Junior Rolling Pin

Fantastic decorative rolling pin to make your biscuits special.

A practical tool, easy to use and that will give you a unique result! Involve the kids in the kitchen and together make original homemade biscuits with cute little machines!

Roll out the dough, decorate it with the rolling pin and carve the shapes of your choice. Ideal for decorating biscuits, cakes, sugar paste, marzipan.

You can use it artistically to make creations in clay, salt dough and modelling pastes.

It is not only for pastry lovers, but also an excellent gift for any occasion.

It is also an excellent idea for original wedding favours.

Each roller is made of solid beech wood and edible oil to prolong its quality, thus guaranteed for food use. It is natural and ecological.

After each use, wash by hand with warm water, without soaking and without detergents. Rolling pin length with handles: 23 cm

Decorated roller length: 12 cm

Rolling pin diameter: 4.5 cm

Material: Beech wood.

Intended use: tactical

Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier

Production: Taiwan

The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

KA-BAR

Intended Use: Sporting / Light Utility

Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -

Intended use: Tactical / EDC

Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Dress A Teddy

16 piece teddy bear and clothes icing & gum paste cutter set by Jem

16 piece sugarcraft set from Jem in South Africa interchangeable cutters for mummy, daddy and baby bears, bear faces plus clothes, pram, parasol, hats etc

- dress them any way you like

- food approved plastic

-  packed with instructions

- fine for sugarpaste icing, but even better with gum paste and flower modelling paste.

JEM - Baby-Nursery-themed sugarpaste cutters set - CAKE DESIGN - PROMO

Create delicious decorative designs with fondant or gum paste using these plastic cutters. Set includes: - 12 sugarcraft cutters. - 9 cutters: 2 baby, bottle, dummy, rocker, booties, bib, rattle, pram and baby face This wonderful set consists of a variety of different sitting babies, plus standing and crawling babies. It also has a variety of accessories i.e. nappy, babygrow, flower fairy dress, chef's hat, fairy party .

The cutters are made from plastic and come with instructions.

Perfect for christening, baby parties and first birthday cakes as well as fairy fantasy cakes.

Suitable for creating toppers on cakes and sides using gum paste

Intended Use: Sporting / Collection

Country of Production: Taiwan
Blade: AUS 8A stainless steel with Gray Powder Coat treatment
Handle: GFN-PA66
Blade Length: 89mm.
Blade thickness: 2.8mm.
Length closed: 114mm.
Total length: 204mm.
Weight: 95g.
Closure: Back Lock
Opening: One-handed, through pivot on the blade
Clip: steel, removable, ambidextrous
Package: cardboard box with Ka-Bar logos

Intended use: tactical / military

Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Gouge 22 can be used for details such as fingers, mouth, lips, eyes etc ...

Gouge measures: total length about 24.5 cm
Production: Switzerland

4 different sizes are available from 1 to 4mm

Guarda tutti i prodotti Pfeil a questo link: PFEIL

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Curved gouge n.11A

Gouge measures: total length about 24.5 cm
Production: Switzerland

7 different sizes are available from 1 to 10mm

Non-stainless steel tools for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles.

Curved gouge n.7A

Gouge measures: total length about 24.5 cm
Production: Switzerland

10 different sizes are available from 4 to 30mm

Intended use: Bushcraft / Outdoor

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical / military

Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 model

Intended use: Tactical / Military / Collection

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logos

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The Tactical Spork, made of Grilamid polymers approved for food and water, is equipped with a combination fork, spoon and serrated knife in a single plastic tool.

Material: polymer
Total length: 170mm
Weight: 40g

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Intended use: tactical

Blade: in stainless steel AUS 8A
Handle: Zytel
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 105mm.
Total length: 183mm.
balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel

Design: by Bob Dozier
Production: Taiwan

Intended use: Tactical / Military / Collection

Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
Community

The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Non-stainless steel tools, for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully hand-sharpened, and all equipped with wooden handles. Palm gouge for working wood
Set consisting of 6 pieces
Height with wooden handle: 128mm
Blade height: 73mm

Country of production: Switzerland.

Measurements in the package:

L 5/3
L 7/6
L 7/10
L 9/5
L 11/1
L 12/1

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For carving lettering and ornamentation and for sculpting figures.

Gouges serie 16 - 35°

Gouge measures: total length 24.5 cm

They are provided 4 different measures from 1 to 8 mm

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Pfeil G paste for polishing blades, chisels and gouges

- Dimensions: 210x60mm

- Weight about 900 grams

Tools in non-stainless steel, for carving and woodworking, all hardened, with final hardness between 59-61 RC, carefully sharpened by hand, and all equipped with wooden handles. Handheld gouge for working wood
Set of 8 pieces
Height with wooden handle: 135mm
Blade height: 80mm

Measures included in the package:
Production: Switzerland

L 1/8
L 1s / 8
L 1a / 8
L 5/8
L 11/3
L 12a / 4

Pfeil gauze fabric bag composed of 10 gouges

Closed dimension: 30cm x 11cm

Weight: 1030 gr.

The 10 different models of gouges in the package:

- 1/8
- 1s / 8
- 5/8
- 5/20
- 7/6
- 7/14
- 7L / 20
- 8/4
- 8a / 10
- 9/10
- 11/3
- 12/6

Pfeil gauze fabric bag consisting of 10 gouges and 2 accessories

Closed dimension: 30cm x 10cm

Weight: 1330 gr.

Present accessories:
- 1x Kerb 12
- 1x pencil

The 10 different models of gouges in the package:

- 1s / 10
- 1s / 20
- 1s / 30
- 3/35
- 4/20
- 5/12
- 7/10
- 7/35
- 11/5
- 11/10

Pfeil carving knives bag in fabric

4 pieces

- Schaller knife SchG

- Schaller knife SchK

- Canard carving knife CaG

- Canard carving knife CaK

Pfeil fabric bag with gouges

Closed dimension: 30cm x 23cm

Weight: 3000 gr.

Present accessories:
- 80mm diameter wooden hammer
- Two Arkansas grinding stones
- Oil
- Brienz Carving Knife

The 20 different models of gouges present in the package:
- 1/16
- 1s / 16
- 2/20
- 3/3
- 3/12
- 3/25
- 5/35
- 7/20
- 8/7
- 8/18
- 8/25
- 9/7
- 8th / 18
- 9/15
- 7L / 25
- 11/2
- 11/10
- 15/3
- 12/10
- 14/8

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

No stainless steel tools, for sculpture and woodwork, all tempered with final hardness between 59-61 RC, sharpened and ready, and all with wooden grip. PDAs gouges for woodworking.
Set consists of 8 pieces.
Height with wooden handle: 135mm
Blade height: 80mm

Production: Switzerland

Measures included in the package:

B2/12
B4/12
B7L/12
B8/10 
B9/7 
B11/7 
B15/6 
B25/10

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

For shaping recesses and working in corners.

Gouges serie 8L

Gouge measures: total length 24.5 cm

They are provided 9 different measures from 4 to 35 mm

Pfeil G paste for polishing blades, chisels and gouges

- Dimensions: 210x60mm

- Weight about 900 grams

For smaller hands and beginners tackling basic projects. Exact same quality and features as our full-sized chisels. 85 mm blade length, 200 mm overall length.
Contents: pfeil chip carving knive pfeil, 3 medium-sized tools.

D 1/8, D 8/7, D 12/6, pfeil

Size: 260 x 130 mm

Weight: 160 g

Blade length: 85 mm
Overall length 200 mm

wooden support with rigid black leather jacket for sharpening gouges, chisels and sgalpelli Pfeil
Dimensions: 300x40x20 mm

Bag fabric door gouges Pfeil

Closed size: 30cm x 23cm

Capacity: max 12 pieces

The name pfeil stands for high quality, achieved through state-of-the-art production technology and proven know-how. Our products are manufactured 100% in Switzerland. A family-owned company, currently managed by the third generation, we are a leading manufacturer of carving tools.
Your woodcarving passion is important to us – so we work hard every day to ensure for you a future of woodworking enjoyment.

White beech with steel ferrules. Blade is chrome vanadium steel, finely honed and polished razor sharp. 25° bevel.

Gouge measures: total length 29ncm

Bag fabric door gouges Pfeil

Closed size: 30cm x 13cm

Capacity: max 12 pieces