Last up date

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for U.S. troops in World War II and since then its effectiveness has been universally recognized and employed in many other military scenarios. With this special edition, Ka-Bar celebrates the company's 125th anniversary.

Intended Use: Tactical/Military

Blade: 1095 carbon steel 56/58HRC
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: backward
Weight: 305g.
Sheath: leather
Notes: special edition to celebrate the company's 125th anniversary

Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.

Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.

Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.

Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -

La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR

Host - Wine Freeze - set of 4 universal glasses - REFRIGERATORS

HOST WINE PRODUCTS

The love for innovative design applied to the world of wine is the polar star of Host. The result is a line of products that are as beautiful as they are functional. The shapes and lines of the objects are designed to combine the pleasure of beauty with the comfort of the useful; the packaging is fresh and cared for in every detail; the spirit is attentive and sensitive to the enhancement of the qualities of wine. We know that serving wine at the wrong temperature is one of the most common mistakes made with fine wines. Or, again, it is often thought that red wine should be enjoyed at room temperature: one of the trends of summer 2013, however, was Chianti served chilled.

Have you ever wanted a warm beer in winter or a chilled red wine in summer? No, everything needs to be at the right temperature.

Host Freeze is just that: keep it in the freezer and when you feel like having a drink, it will be ready.

Just pour and enjoy the well-deserved refreshment! The Freeze wine glass is ideal for enjoying both red and white wine: kept in the freezer for at least two hours, it keeps the wine at a temperature of between 6°C and 11°C;

If you keep it in the fridge, it will keep it between 14°C and 16°C. For those who haven't got their act together yet, a Seattle-based company has come to the rescue: the Host Freeze Cooling team has created these ingenious wine glasses that automatically cool even the hottest liquid. The glass is surrounded by a gel which cools down when the glasses are placed back in the refrigerator. This ensures that the wine is at the right temperature for perfect tasting, especially in the warmer seasons.

An original idea that can be very useful for last-minute dinners, or for the ever-inconsiderate who forget to refrigerate bottles of fine wine in time.

Pack of 4 glasses in 4 different colours, capacity 250ml.

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closure: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Intended Use: Light Utility

Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 286mm.
Weight: 280g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -

Intended Use: Light Utility

Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 122mm.
Blade thickness: 4mm.
Total length: 254mm.
Weight: 275g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -

Coltelleria Collini is the official distributor for Italy of White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 109g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Coltelleria Collini is the official distributor for Italy of White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Production Lama: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Closed Length: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 109g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Intended use: Hiking / Heavy Utility

Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 203mm.
Blade thickness: 5mm.
Total length: 343mm.
Weight: 337g.
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: -
Total length: 185mm.
Thick when closed: -
Balancing: -
Weight: 79g.
Closing: -
Clip: -
Sheath: in leather
Packaging: Wooden box with WRKT logos
Note: -

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 135mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 213g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Note: -

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 238g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closing: -
Clip: -
Sheath: in Kydex
Packaging: Wooden box with WRKT logos
Note: -

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 172g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket
Send feedback
History
Saved

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 250mm.
Thick when closed: -
Balancing: 1.5 cm backward
Weight: 232g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

From KA-BAR regarding the special engraved logo: The engraved logo features the historical "The Union" logo from the early 1900s, a bear, and the years marking 120 years - 1898 and 2018.
The significance of the bear is in the KA-BAR name itself. An Alaskan hunter was attacked by a Kodiak bear, but successfully defended himself using his Union Cutlery knife. The hunter was so thankful that he sent a letter describing the ordeal with "K a Bar" (Kill a Bear) as well as sending in the bear fur. The officers of Union Cutlery decided to adopt KA-BAR as a trademark in 1924.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 90g.
Sheath: in Kydex
Packaging: cardboard box with WRKT logos
Note: -

ACCESSORY TO BE USED WITHIN YOUR KEY-BAR

* It has cutter and cutter functions
* Equipped with a quick release pin
* Equipped with 10 spare blades, easily replaceable
* Made of titanium, with stainless steel parts
* Original Key-Bar accessory
* Made in the USA

 
THE BRAND PHILOSOPHY

The philosophy behind the Key-Bar is simple and the result of a necessity: carry your keys daily in your pocket without them making noise and moving anywhere creating discomfort.

Then enter the stage of the creativity and inventiveness of Michael Taylor who, after many hours of research and prototyping in his small workshop in Savannah, USA, invented Key-Bar. A small rigid keychain, configurable at will, which allows the keys to always be in order, not to emit noise during transport and to be easily anchored inside your pocket or attached to the belt.

The development of Key-Bar is only just beginning, but its potential is enormous. In fact, it is possible to separately purchase additional accessories to be inserted together with the keys that allow you to create a small multi-purpose tool ready for any eventuality every day!


No special tools are required to assemble and configure your Key-Bar; all the handles are made of solid material and CNC workbenches and then finished by hand.

Each Key-Bar is made of non-ferrous materials, while the screws are made of stainless steel, in order to guarantee maximum hygiene and extremely easy cleaning and maintenance.

Patented and entirely made in Savannah, USA

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Intended use: Machete

Blade: carbon steel 1095 56 / 58HRC
Country of production: USA
Finishing: Teflonatura
Handle: GFN-PA66 polymer
Blade length: 359mm.
Blade thickness: 5mm.
Total length: 498mm.
Balancing: advanced
Weight: 589g.
Sheath: cordura, with vertical belt attachments

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 238g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Note:

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Black
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex with flintlock
Packaging: Wooden box with WRKT logos
Note:

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in G10 Orange
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thick when closed: -
Balancing: 1 cm backward
Weight: 106g.
Closing: -
Clip: -
Sheath: in kydex
Packaging: Wooden box with WRKT logos
Note:

Designed for intensive use in real-life situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: in paracord
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 200mm.
Thickness when closed: -
Balancing: 1 cm back
Weight: 94g.
Closure: -
Clip: -
Sheath: in kydex
Packaging: cardboard box with WRKT logos
Note:

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 175
Blade thickness: 5mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balancing: 0.5 cm advanced
Weight: 320g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocket

Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives.  The deep finger choil protects fingers while applying pressure whittling, cutting or chopping.  Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife.  Features a polished stainless steel divot for use with a fire bow.  This is a well-designed, great looking, and robust knife intended for serious work.

Blade Length:    5”

Overall Length:  10”

Blade Steel:       CPM S30V

Hardness:          59 HRC

Sheath:              Leather

White River Guarantee: If you are not 100% satisfied with this knife, send it back for free repair or replacement.

Designed for heavy use in real survival situations these also make excellent camp, hunting, backpacking or utility knives.  The deep finger choil protects fingers while applying pressure whittling, cutting or chopping.  Atop the blade is a notch for efficient striking of a ferro rod and one is included with each knife.  Features a polished stainless steel divot for use with a fire bow.  This is a well-designed, great looking, and robust knife intended for serious work.

Intended use: Hunting / Sports

Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 225mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 172g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Notes: flask housed in a pocket of the sheath

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: -
Blade Length: 98mm.
Blade thickness: 3.1mm.
Total length: 200mm.
Balance: advanced, 1 cm from the lower guard branch
Weight: 68g.
Sheath: ABS, neck, compatible M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Note: -

Purpose of use: Outdoor / Utility

Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade Treatment: Satin
Handle: Zytel interchangeable in Blue Reptile or Purple Dolla Holla
Blade Length: 116mm.
Blade thickness: 4.8mm.
Overall length: 228mm.
Balance: backward, 1 cm from the lower guard branch
Weight: 181g.
Sheath: in leather
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Mike Snody - Schmuckatelli Coat Powder Coat - Coordinated Paracord

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse Jarosz

Intended use: Tactical / Utility

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflon coated
Handle: Ultramid
Blade Length: 155mm.
Blade thickness: 5mm.
Total Length: 287mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 338g.
Sheath: kydex

Intended use: Tactical / Utility

Blade: 1095 carbon steel 56 / 58HRC
Country of Origin: USA
Finish: Teflon coating
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Sheath: Leather

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a necessity: daily carry your keys in your pocket without the latter make noise and move wherever creating hassles.

Then enters the scene creativity and Michael Taylor inventica that after many hours of research and prototypes achievements in their own small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and fit comfortably anchored within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is huge. And 'you can separately purchase additional accessories to be included along with the keys that allow you to build a small multi-tool ready for any eventuality daily!

Handle Material: G10 and Aluminium
Handle length: 89mm.
keyless Weight: 34g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert 1 to 12 keys
15x spacers
2x O-ring
correggiolo 1x
1x titanium clips

No special tools to assemble and configure your Key-Bar; All handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The Collini Cutlery is the official distributor for Italy of White River Knife & Tool knives

Intended Use: Hunting / Sporting

Type of production: Artisan
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: Black
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closed: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos WRKT
Notes: -

White River Knife & Tool - Knucklehead - knife

Intended Use: Hunting / Sporting

Type of production: Artisan
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: Black
Handle: -
Blade length: 73mm.
Blade thickness: 3.5mm.
Closed Length: -
Overall length: 153mm.
Thick when closed: -
Balancing: -
Weight: 60g.
Closed: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos WRKT
Notes: -

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

PRODOTTI PER BIRRA E COCKTAIL

In un pomeriggio caldo, niente è meglio di un drink dissetante.

Tieni il tuo bicchiere Freeze in congelatore e, quando vorrai qualcosa di fresco, lui sarà pronto!

Grazie al suo gel refrigerante brevettato e l’impugnatura in silicone puoi goderti il tuo ristoro nella canicola estiva.

Scegli tra i bicchieri da 25cl per bibite, macedonia o gelato che mantengono una temperatura tra i 6°C e gli 11°C (tra i 14°C e i 16°C se li tieni in frigo, anziché in congelatore) e il bicchiere da 47cl, per bibite o birra, che mantiene i drink tra i 3°C e i 5°C (tra i 10°C e i 12°C in frigo).

L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile; il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino.

Hai voglia di una birra o una bibita fresca, il Freeze da pinta è la soluzione per te. Se lo tieni in congelatore, mantiene il tuo drink tra i 3°C e i 5°C; in frigo, tra i 10°C e i 12°C

In aiuto di chi non si fosse ancora ben organizzato arriva un'azienda di Seattle: il team di Host Freeze Cooling ha infatti creato questi ingegnosi bicchieri da birra che raffreddano automaticamente anche il liquido più caldo. Il vetro è circondato da un gel che si raffredda se i bicchieri vengono riposti in frigorifero. In questo modo si assicura alla birra o al succo di frutta o alla bibita la giusta temperatura per una perfetta degustazione, soprattutto nelle stagioni più calde. Un'idea originale che può rivelarsi molto preziosa in caso di feste dell'ultimo momento, o per eterni sbadati che dimenticano di mettere al fresco per tempo le bottiglie di vino più pregiato.

Capacità 16oz. 2 BICCHIERI

Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife

Intended use: collection

Blade: carbon steel 1095 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closure: -
Clip: -
Sheath: Leather
Notes: Limited Edition

PRODOTTI PER VINO HOST L’amore per il design innovativo applicato al mondo del vino è la stella polare di Host. Il risultato è una linea di prodotti tanto belli quanto funzionali. Le forme e le linee degli oggetti sono studiate per unire il piacere del bello al comfort dell’utile;

il packging è fresco e curato in ogni dettaglio; lo spirito è attento e sensibile all’esaltazione delle qualità del vino. Ogni bicchiere di vino ha una sua storia da raccontare, un sorriso da ricordare e un gusto suo e solo suo.

Host vuole accompagnare tutti questi momenti ed essere complice di chi vuole gustare il vino in tutta la sua essenza.

Il marchio Host è di proprietà dell’azienda statunitense True Fabrications, fondata a Seattle nel 2003 da un terzetto di compagni di college amanti del vino e maniaci del design. Oggi l’azienda è uno dei leader mondiali nella distribuzione di prodotti innovativi per il vino e punto di riferimento per migliaia di operatori del settore.

BPA-FREE

Tutti i prodotti Host NON contengono BPA, il Bisfenolo A, dannoso per la salute e presente nella maggior parte dei prodotti in plastica.
TWIST

Host Twist è l’unico aeratore regolabile che ti permette di scegliere la quantità di ossigeno più adatta alla tua bottiglia.

Puoi aerare istantaneamente il tuo vino e decidere che ossigenazione applicare: da 1 a 6 ore! Host ha effettuato studi scientifici per definire la quantità di ossigeno che si unisce al vino nei decanter tradizionali e l’ha confrontata con quella che il Twist ottiene in pochi secondi in maniera assolutamente naturale.

COME USARE IL TWIST

Muovi in senso anti-orario la parte superiore del Twist e regola la quantità di ossigeno che esalta meglio il tuo vino. Il numero 1 corrisponde ad 1 ora di aerazione, il numero 2 a 2 ore e così via, fino a sei ore, in pochi istanti! Tieni il Twist sopra il bicchiere che vuoi riempire, versaci dentro il vino e goditelo con chi vuoi. OSSIGENA NEL MODO GIUSTO La corretta aerazione del vino ammorbidisce i tannini e permette l’esaltazione degli aromi. Ogni vino ha bisogno della corretta quantità di ossigeno per poter esprimere al meglio il suo potenziale. In generale, vale la regola per cui un vino da invecchiamento ancora giovane ha bisogno di un’ossigenazione maggiore per poter sprigionare al meglio tutti gli aromi; un vino già invecchiato, invece, deve essere ossigenato più delicatamente affinché conservi le note fruttate residue e il vigore che ha resistito al processo di invecchiamento.

Intended Use: Hiking / Heavy Utility

Type of production: Industrial
Production Lama USA
Blade: Stainless 1095 56/58HRC
Treatment Blade: Black Traction Coating
Handle: Zytel
Blade length: 135mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 454g.
Closure: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with logos KA-Bar
Notes: Design by Ethan Becker

The KA-BAR BK7 is a rugged field knife designed to meet the toughest outdoor challenges.

The blade shape is a variation of the classic "clip point," featuring a pronounced curve on the back that converges toward the sharp point. This design allows for easy precision work and offers enough extension for heavier tasks such as woodworking.

The BK7's handle is made of Ultramid, a reinforced plastic material that provides a secure and comfortable grip even in wet or sweaty conditions. The ergonomics of the handle are designed to provide optimal control during use and reduce hand fatigue during prolonged work.

Intended Use: Hiking / Heavy Utility

Production type: Industrial
Country of manufacture: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Traction Coating
Handle: Ultramid
Blade Length: 180mm.
Blade thickness: 4.5mm.
Total length: 325mm.
Balance: advanced
Weight: 475g.
Sheath: Nylon, thigh-high, MOLLE compatible, with rigid ABS insert and external pocket to hold other tools or sharpeners
Packaging: cardboard box with KA-Bar logos
Notes: Design by Ethan Becker

Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives

Intended use: Hunting / Sports

Type of production: Artisan
Blade production: USA
Blade: CPM-S35V 58 / 60HRC stainless steel
Blade treatment: -
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closing: -
Clip: -
Sheath: in Kydex
Packaging: Wooden box with WRKT logos
Note: -

White River Knife & Tool - BackPacker - Desert Paracord - knife

The Collini Cutlery is the official distributor for Italy of White River Knife & Tool knives

Intended Use: Hunting / Sporting

Type of production: Artisan
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: -
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closed: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos WRKT
Notes: -

Intended Use: Hunting / Sporting

Type of production: Artisan
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: -
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 80g.
Closed: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos WRKT
Notes: -

White River Knife & Tool - Knucklehead - knife

Intended Use: Hunting / Sporting

Type of production: Artisan
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: -
Handle: -
Blade length: 73mm.
Blade thickness: 3.5mm.
Closed Length: -
Overall length: 153mm.
Thick when closed: -
Balancing: -
Weight: 60g.
Closed: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos WRKT
Notes: -