Last up date

ScanPan - Impact Roasting Pan with Rack - 43cm x 28cm

The SCANPAN Impact Roasting Pan, the perfect dish for roasting meat and vegetables, baking lasagnes and gratins or making cakes, crumbles and puddings. The Roasting pan also features two handles that make it well-suited for serving. Wire rack included. Also compatible with all stove-tops, including induction.

All SCANPAN Impact cookware is covered by a 10-year warranty against manufacturing defects Features Practical measuring units on the inside Rim designed to prevent dripping Ovenproof up to 250°C 18/10 stainless steel inside for maximum durability Suitable for all cookers including induction Dishwasher safe, but not recommended

Specifications

Size - 43cm x 28cm

Height without lid - 11cm

Base diameter - 23cm x 32cm

Weight - 3.01kg

Cleaning: After use, let the product cool off, then wash with warm, soapy water.

The product must always be completely clean, before it is put away. It is not recommended to wash the product in the dishwasher.

USED KNIFE, WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife previously purchased, from a private collection
* Condition: Like new
* Available on the market: Out of production
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Present and in excellent condition
* Sheath: Present and like new
* Manuals, Certificates, and Warranties: Present
* Checked and Certified by our internal laboratory

At 2:38 in the morning on the night between January 16 and 17, 1991, just 18 hours and 38 minutes after the expiration of the ultimatum set by the United Nations, Operation "Desert Storm," the largest allied military action since 1945, began.

In what would become the first conflict in history to be broadcast live on television, 90,000 tons of bombs would be dropped, marking a new point of no return for what was considered acceptable by global public opinion. The imagery that war helped create would lay the groundwork for the long series of Western military interventions in the Middle East in the years that followed.

Intended use: Tactical/Military

Country of production: USA
Blade: 1095 carbon steel 56/58HRC
Handle: Leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: Set back - 1 cm from the lower guard
Weight: 305g.
Sheath: Leather
Notes: Commemorative edition from the 2000s, out of production and no longer available

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: G10
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

Released in 2023, the MSI (Microtech Standard Issue) is the first Microtech knife to feature the fantastic RAM-LOK technology. This sturdy reinterpretation of the sleeper lock features Microtech's distinctive stepped pattern, made famous by the Ultratech series trigger switches. The wide blade cutout provides ample room for reverse middle finger movement and standard slow-rotation thumb opening, with or without gloves. If neither is preferred, simply pull down on the RAM-LOK and the blade opens with a flick of the wrist. Injection-molded handles offer excellent grip potential with both standard and inverted grips. Rugged, durable, great value and made in the USA, we know the MSI will quickly become a favorite of everyone in the knife community.

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Black PVD
Handle: Injection molded polymer
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 129mm.
Total length: 226mm.
Thickness when closed: 15mm.
Weight: 128g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: stainless steel, removable and reversible (tip up)
Packaging: cardboard box with Microtech USA logos
Notes: -

KEY FEATURES.
* Maximum power output of 2,000 lumens.
* Uses an ultra-high-efficiency UHE LED.
* Features a primary white light (color temperature: 6,000K) and an auxiliary red light
* Uses a unibody optical lens system with various facets that emit uniform light
* Powered by an external power source, supports PD protocol.
* Has a built-in battery (3.6 V 40 mAh) and automatically switches to EMERGENCY mode if power is disconnected.
* Designed with two different buttons in shape and touch for easy one-handed operation.
* 7 brightness levels, 2 light sources and 3 special modes available.
* Made of durable PC material
* Die-cast aluminum alloy heat sink for efficient heat dissipation.
* Shock resistant up to 1 meter
* Waterproof and dustproof grade according to IP68 standard (2 meters immersion)

TECHNICAL DATA.
LEDs: 8x UHE LEDs with a life cycle of 50,000 hours
Output: 7x bright, digitally adjusted outputs and 3 signaling modes
Powers and durations primary light: 2000 lumens (9h.) -> 1000 lumens (11h.) -> 400 lumens (17h.) -> 180 lumens (31.5h.) -> EMERGENCY 20 lumens (66h.) -> S.O.S. -> Beacon
Powers and durations auxiliary red light: 15 lumens (52h.) -> 5 lumens (78h.) -> flashing at 15 lumens
Range: up to 160mt.
Peak power: 6000 candelas
Power Sources: The flashlight does not come with batteries, but only with a USB-C cable to connect it to compatible external PowerBanks that have at least a discharge capacity of 20W or more and are compatible with the PD protocol - The flashlight is also compatible with regular PowerBanks that do not meet the previous requirements, but can only produce a maximum power of 1000 lumens. - It has a small built-in battery (3.6V / 40mAh) that allows it to produce a 20 lumens emergency light for 30 minutes if left without power from the PowerBank
Flashlight dimensions: 80x41.9x26.1mm. 
Weight: 114g (with mounting bracket, elastic band and USB cable included)
Lens: optical matrix
Body: made of PC
Strap: elastic, breathable, adjustable in diameter
Impact resistance: withstands falls from 2m height

The NITECORE MT1A Pro is a compact and lightweight flashlight with a powerful UHi 25 LED that emits 800 lumens up to 250 meters. It runs on a 14500 rechargeable battery or an AA battery, and has a durable design thanks to aircraft aluminum with HA III military finish. It is waterproof (IP68), shockproof up to 2 meters, and has a scratch-resistant optical lens. It has a back switch for easy operation, a constant current circuit, and a brightness level memory function.

LEDs: UHi 25 LEDs with a life cycle of 50,000 hours
Operating Modes: 3 light powers
Powers and Durations with NL1411R battery: 800 Lumens (1h.) -> 300 Lumens (1.45h.) -> 50 Lumens (10h.)
Powers and Durations with 1 A battery: 200 Lumens (1.30h.) -> 50 Lumens (5h.)
Peak power: 15700 candelas
Maximum lighting distance: 250m.
Power and light selection method: rubber back button:
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: uses NL1411R (included); also compatible with 1x AA disposable/rechargeable 1.2/1.5V
Measurements: 93mm (L) - 17.2mm (D shaft) - 19.7mm (D head)
Weight: 32g. battery excluded / 52g. battery included
Accessories: wrist strap, clip, charging cable
Waterproofness: as per IPX-8 standard, submersible to 2m depth for 30min.
Impact resistance: withstands falls from 2m height

The Flipper version of the famous TDI Ka-Bar knife is perfect for everyday use. The stainless steel blade with Spear Point profile opens easily with the Flipper system or through the slot on the blade. The sturdy Crossbar lock, accessible from both sides, ensures stability and safety during use.

The fiberglass-reinforced nylon handle makes it lightweight and durable. The ergonomic, knurled design ensures a comfortable and secure grip even with prolonged use. The clip is removable and can be easily moved to the other side, allowing the knife to be clipped to any pocket.

Intended use: tactical/EDC

Type of production: industrial
Country of manufacture: Taiwan
Blade: stainless steel AUS-8 57/59HRC
Blade finish: powder coating
Handle: GFN
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 96g.
Locking system: CrossBar Lock (Axis Modified)
Clip: removable and reversible, stainless steel
Packaging: clear plastic and cardboard box with Ka-Bar logos

The NITECORE EDC29 LUMINBLADE is an ultra-thin, high-performance flashlight designed for everyday and tactical use. With a brightness of 6,500 lumens and a range of 400 meters, it is the most powerful ultra-compact tactical flashlight in the EDC series. Its slim design offers the performance of the TM series, combining a dual LED system with 18 cores, which ensures exceptional illumination and long-range capabilities.

Thanks to light control technology, the EDC29 has three modes: LUMIN SHIELD™ for protection and wide illumination, STROBE for disorienting effects, and Tactical Search Mode that emits a 3,000 lumen beam.

Equipped with dual-stage tactical switches, it allows you to easily adjust the functions with light or full presses. The durable body, with steel and carbon fiber composite shells, ensures a secure grip and durability. Lightweight (160 g), it is powered by a built-in 2,500 mAh battery that offers up to 61 hours of battery life, with an OLED display that provides real-time information. Waterproof (IP54) and resistant to drops from 1 meter.

KEY FEATURES:

Uses 2 x UHI 20 MAX LEDs with a maximum output of 6,500 lumens
Maximum beam intensity of 40,230cd and a maximum throw of 400 meters
4 brightness levels to choose from: SEARCH, LUMIN SHIELD™ and STROBE available
A customizable button to access LUMIN SHIELD™ or STROBE READY™
Multifunctional real-time OLED display for brightness level, lumens, battery voltage and runtime
Built-in 2,500mAh lithium-ion battery
Uses a precision orange reflector, providing long-range and wide-angle illumination
Advanced Power Cut-off (APC) technology for extremely low standby power consumption
Highly efficient constant current circuitry provides up to 61 hours of runtime
Dual rear switch for intuitive operation
Rechargeable battery level preset available to set the desired level in advance
Built-in lithium-ion battery charging circuit with USB-C port
Intelligent mode memory function
Lock switch (Rapid Lock™) available for partial and full lock mode
Built-in Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
High-strength stainless steel body with titanium coating by physical vapor deposition (PVD)
Waterproof and dustproof rating compliant with IP54 standard
Impact resistant up to 1 meter

TECHNICAL DATA:

Led: 2x UHi20 MAX with a life cycle of 50,000 hours
Brightness levels: 4 light powers + STROBE
Powers and Runtimes: 6500 Lumens (N.A.) -> 3000 Lumens (N.A. ) -> 1200 Lumens (2h.) -> 400 Lumens (3h.) -> 100 Lumens (13h.) -> 6 Lumens (61h.)
Peak power: 42,230 candela
Maximum illumination distance: 400m.
Body: aluminum alloy with HAIII hardened anodized finish
Battery: Integrated 2,500mAh Li-Ion type, equipped with integrated USB-C type charging system
Dimensions: 13.4cm (Length) -3.46cm (Width) - 3.45cm (Thickness)
Weight: 160g.
Accessories: Wrist strap, USB charging cable
Waterproof: as per IP54 standard, resistant to dust and light splashes of water
Impact resistance: withstands drops from 1m high
Notes: Equipped with an integrated charging system via USB-C port (cable included, power supply not included)

The TO GO thermal mug is designed to carry hot or cold drinks conveniently and safely anywhere. 
Made of 18/8 food-grade stainless steel, it is coated with a durable scratch-resistant paint for a secure grip and long life. 
The practical 360° Push & Sip lid allows convenient drinking from any side, while the airtight screw cap is easily removable, ensuring easy and thorough cleaning. 
The non-slip silicone base ensures stability on any surface, and the compact design fits into most car cup holders, making it ideal for people on the move.

- Scratch and non-slip
- Perfect for travel, outings or everyday activities
- Cold up to 12 hours
- Hot up to 6 hours

Capacity: 287ml

Colour: Baby lavender

The TO GO thermal mug is designed to carry hot or cold drinks conveniently and safely anywhere. 
Made of 18/8 food-grade stainless steel, it is coated with a durable scratch-resistant paint for a secure grip and long life. 
The practical 360° Push & Sip lid allows convenient drinking from any side, while the airtight screw cap is easily removable, ensuring easy and thorough cleaning. 
The non-slip silicone base ensures stability on any surface, and the compact design fits into most car cup holders, making it ideal for people on the move.

- Scratch and non-slip
- Perfect for travel, outings or everyday activities
- Cold up to 12 hours
- Hot up to 6 hours

Capacity: 287ml

Colour: Candy pink

The TO GO thermal mug is designed to carry hot or cold drinks conveniently and safely anywhere. 
Made of 18/8 food-grade stainless steel, it is coated with a durable scratch-resistant paint for a secure grip and long life. 
The practical 360° Push & Sip lid allows convenient drinking from any side, while the airtight screw cap is easily removable, ensuring easy and thorough cleaning. 
The non-slip silicone base ensures stability on any surface, and the compact design fits into most car cup holders, making it ideal for people on the move.

- Scratch and non-slip
- Perfect for travel, outings or everyday activities
- Cold up to 12 hours
- Hot up to 6 hours

Capacity: 287ml

Colour: Sun

The TO GO thermal mug is designed to carry hot or cold drinks conveniently and safely anywhere. 
Made of 18/8 food-grade stainless steel, it is coated with a durable scratch-resistant paint for a secure grip and long life. 
The practical 360° Push & Sip lid allows convenient drinking from any side, while the airtight screw cap is easily removable, ensuring easy and thorough cleaning. 
The non-slip silicone base ensures stability on any surface, and the compact design fits into most car cup holders, making it ideal for people on the move.

- Scratch and non-slip
- Perfect for travel, outings or everyday activities
- Cold up to 12 hours
- Hot up to 6 hours

Capacity: 287ml

Colour: Airy blue

The TO GO thermal mug is designed to carry hot or cold drinks conveniently and safely anywhere. 
Made of 18/8 food-grade stainless steel, it is coated with a durable scratch-resistant paint for a secure grip and long life. 
The practical 360° Push & Sip lid allows convenient drinking from any side, while the airtight screw cap is easily removable, ensuring easy and thorough cleaning. 
The non-slip silicone base ensures stability on any surface, and the compact design fits into most car cup holders, making it ideal for people on the move.

- Scratch and non-slip
- Perfect for travel, outings or everyday activities
- Cold up to 12 hours
- Hot up to 6 hours

Capacity: 287ml

Colour: Weeping Willow

Drip.it+ bottle drainer

Length: 37.5cm - 56.5cm (extendable)

Width: 10.5cm

Weight: 358g

Stainless steel insert included

Material: silicone + stainless steel

Inventor: Susanne Richter (SanniShoo)

Cleaning likes to decorate... Everyday life around the sink.

drip.it offers the ideal solution for various ‘draining scenarios’. The stainless steel insert makes it the perfect mobile and easily stowable draining station for almost all types of reusable bottles. Whether glass bottles, modern thermo bottles or baby bottles.

Heat-resistant silicone rings protect the bottles from scratches. Up to three bottles can be drained at the same time with drip.it+. There is also space for bottle caps, brushes, sponges etc. on an extra shelf.

Freshly washed salad or cooked pasta can also be easily drained in the sieve (sieb.up) with the help of drip.it+. -drip.it+ is extendable and therefore fits perfectly on any sink.

This makes it ideal for use as a flexible colander holder for draining washed or cooked food over the sink. Fewer germs on the sink thanks to better drying bottles, dishcloths, sponges and brushes. A simple idea, but a real jack-of-all-trades that can do a lot.

Designed exclusively for Nitecore i-Series and i-Generation flashlights, not compatible in other flashlights or other devices

BATTERY FEATURES
* Rechargeable Li-Ion 21700 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 5300mAh
* Positive Pole: Flat, simultaneously present at both the bottom and top of the flashlight.
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V
* Continuous discharge capacity: 20A

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

FLASHLIGHT COMPATIBILITY
works only with NITECORE i4000R, P10i, P10iX, P20i, P20i UV, P20iX, P23i, P30i, P35i, SRT6i, SRT7i flashlights and NITECORE i-Series and i-Generation lighting systems - NOT COMPATIBLE WITH OTHER PRODUCTS

BATTERY FEATURES

* Rechargeable Li-Ion 18650 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4000mAh - 10A
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V

BATTERY PRECAUTIONS

* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

BATTERY TECHNICAL SPECIFICATIONS

* Capacity: 4000mAh nominal
* Dimensions: 18.6+/-0.3mm diameter x 69.8+/- 0.3mm height
* Approximate weight: 50g
* Average rated voltage: 3.6V
* Peak voltage: 4.2V
* Power: 10A
* Life cycles: > over 500 cycles

KEY FEATURES:
* Made with a nozzle that fits Presta and Schrader type valves.
* Multifunctional OLED display to show inflation mode, pressure, remaining battery charge, etc.
* The EBP10 has 6 inflation modes, with a maximum pressure of 144psi.
* The EBP10 mini has 5 inflation modes, with a maximum pressure of 120psi.
* Custom mode to freely set the desired pressure.
* Real-time pressure measurement
* Quick conversion function of pressure units (psi and Bar).
* The EBP10 includes a built-in high-performance 8.88Wh lithium-ion battery.
* The EBP10 mini includes an integrated high-performance 2.55Wh lithium-ion battery.
* Intelligent lithium-ion battery charging system with USB-C charging port.
* The EBP10 mini is ultra compact and portable.
* Built with durable ABS and aluminum alloy materials.
* Shock resistant up to 1 meter
* Waterproof and dustproof grade according to IP44

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A
Power rating: 83W (MAX)
Battery capacity: 8.88Wh (14.8V)
Maximum pressure: 144psi / 9.93 Bar (MAX)
Usage time: 600s
Dimensions: 66.0mm x 38.0mm x 79.0mm
Weight: 280g
Accessories included: /

KEY FEATURES:
* Made with a nozzle that fits Presta and Schrader type valves.
* Multifunctional OLED display to show inflation mode, pressure, remaining battery charge, etc.
* The EBP10 has 6 inflation modes, with a maximum pressure of 144psi.
* The EBP10 mini has 5 inflation modes, with a maximum pressure of 120psi.
* Custom mode to freely set the desired pressure.
* Real-time pressure measurement
* Quick conversion function of pressure units (psi and Bar).
* The EBP10 includes a built-in high-performance 8.88Wh lithium-ion battery.
* The EBP10 mini includes an integrated high-performance 2.55Wh lithium-ion battery.
* Intelligent lithium-ion battery charging system with USB-C charging port.
* The EBP10 mini is ultra compact and portable.
* Built with durable ABS and aluminum alloy materials.
* Shock resistant up to 1 meter
* Waterproof and dustproof grade according to IP44

TECHNICAL SPECIFICATIONS
Input: 5V⎓2A
Power rating: 48W (MAX)
Battery capacity: 2.55Wh (11.1V)
Maximum pressure: 120psi / 8.27 Bar (MAX)
Usage time: 240s
Dimensions: 65.0mm x 30.0mm x 65.0mm
Weight: 140g
Accessories included: Compressor, Silicone cove

Weighing only 90g, it offers comfort for trekking, camping and night running. Equipped with 4-core UHE LEDs and a multi-faceted unibody optical lens, it emits 500 lumens with a range of 130 meters ensuring clear and wide visibility. The built-in 1,500mAh Li-ion battery offers up to 97 hours of continuous use.

Leds: 1x cold light, from depth; 2x warm light CRI >90 for close use and reading; 2x red light
Operating Modes: 10 different wattages and light modes
Cold Light Powers and Durations: 500 Lumens (4h. ) -> 200 Lumens (8h.) -> 100 Lumens (24h.) -> S.O.S. -> Beacon Light
Warm Light Powers and Durations: 50 Lumens (32h. ) -> 6 Lumens (97h.)
Powers and Durations Red Light: 20 Lumens (21h.) -> 5 Lumens (80h. ) -> 20 Lumens Flashing (/h-).
Maximum lighting distance: 130m.
Light on and selection method: Two different buttons in shape and tactile feel for on, off and selection
Body: PC (plastic material)
Batteries: built-in 3.7V Li-Ion and 1500mAh, non-removable, equipped with built-in USB-C type charging system
Measurements: 6.23cm (Length) - 4.52cm (Width,) - 3.1cm (Thickness with front stand)
Weight: 90g. - Battery, stand and elastic band included
Accessories: front elastic headband - USB/USB-C charging cable
Waterproofness: as per IP66 standard
Impact resistance: withstands falls from 1m height

Equipped with the UHi 20 LED, it offers up to 1,000 lumens and an illumination distance of 360 meters. It weighs only 80g (including battery) and is easily portable. It includes a 1,600mAh NL1816R rechargeable battery, with 45% more capacity than standard 18350 batteries, providing up to 16 hours of continuous use. It has a USB-C charging port and is compatible with CR123/RCR123 batteries.

LEDs: UHi 20 LEDs with a life cycle of 50,000 hours
Operating Modes: 2 light powers
Powers and Durations with standard supplied NL1816R battery: 1000 Lumens (1.15h.) -> 50 Lumens (16h.)
Peak power: 32500 candelas
Maximum lighting distance: 360m.
Power and light selection method: rear rubber button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x NL1816 (included) or compatible with 1x CR123 disposable or rechargeable 3.0/3.7v batteries
Measurements: 88mm (L) - 2.14mm (D shaft) - 2.68cm (D head) - 2.44cm (D tail)
Weight: 53g. - battery excluded
Accessories included: wrist strap, clip, charging cable
Waterproofness: as per IPX-8 standard, submersible to 2m depth for 30min.
Impact resistance: withstands falls from 2m height

Equipped with the FCB 2.0 heating system, the device reaches a temperature of 165°C, improving the volatilization efficiency of the repellent mat and maintaining an outdoor temperature of 45°C to avoid burns. The elastic structure under the heating area facilitates removal and adherence of the mat, compatible with different sizes.

With a built-in 1,800mAh battery, the EMR06 TAC consumes nearly 60 percent less energy than standard repellents, allowing up to 3.5 hours of continuous protection. Weighing only 98g, it is compact and easy to carry, featuring a rear clip for attachment to backpacks, MOLLE systems or pockets. Despite its small size, it covers up to 4.8 meters of protected area and offers IPX5 protection, resistant to drops up to 1.5 meters.

Compatible with most repellent plates found on the market and in mass retailers (e.g., Vape, Raid etc.)

TECHNICAL SPECIFICATIONS
Waterproofness: IPX5
Shock resistance: 1.5m
Input: 5V - 1A (5W MAX)
Built-in battery: 1800mAh 6.66Wh
Plate heating temperature: 135°C
Protection zone: about 5m.
Dimensions: 5.7 x 9.6 x 1.2cm
Weight: 98g.

PACKAGE CONTENTS.
* Nitecore EMR06 TAC
* USB-C charging cable.
* Clip

Kit designed to extend the life of your Nitecore headlamp with an extra 6000mAh charge.

With this kit, your Nitecore headlamp will be powered first from the powerbank and then, when that is finished, use the rechargeable battery built in or contained within. Compatible with all new Nitecore headlamps (i.e. NU40 / NU43 / NU50 / NU53 / HC65UHE etc.)

The kit consists of:
* Breathable, non-slip and reflective elastic headband.
* Attachment system for the Carbon 6K powerbak.
* Elastic USB-C power cable
* 6000mAh carbon fiber battery pack water resistant as per IP68 standard

Technical Specifications:

* Battery type: Li-ion 21700
* Rated capacity: 6,000mAh 3.6V (21.6Wh)
* Rated energy 3,700mAh 5V (TYP 1A)
* USB-C input: 5V⎓2A
* USB-C output: 5V⎓2A
* IP68 waterproof rating.
* Dimensions ø22.8 mm x 90.0 mm
* Weight 88g (accessories not included)
* Accessories included: USB-C to USB-C charging cable, stand, elastic headband

This product is equipped with 3 red indicator lights that display charging status and power level; they can also function as rear indicator lights.

TECHNICAL DATA:

Led: 2x UHi 20 with life cycle of over 50,000 hours
Brightness Levels: 5 light powers + TURBO or STROBO (programmable)
Powers and Durations: 3100 Lumens (N.D.) -> 1100 Lumens (1.35h. ) -> 200 Lumens (4.20h.) -> 65 Lumens (14h.) -> 15 Lumens (55h.)
Peak power: 23,500 candelas
Maximum lighting distance: 305m.
Lighting method: Dedicated on/off button
Lighting selection method: When on, lightly pressing the power button
Body: Stainless steel with titanium PVD coating and carbon fiber composite structure
Battery: Integrated 1,700mAh Li-Ion type battery, equipped with integrated USB-C type charging system
Measurements: 13.5cm (Length) -3.14cm (Width,) - 2.07cm (Thickness)
Weight: 122g.
Accessories: wrist strap, USB charging cable
Waterproofness: as per IP54 standard, resists dust and light splashes of water
Impact resistance: withstands falls from 1m height
Notes: equipped with built-in charging system via USB-C port (cable included, power adapter not included)

For easy cutting vegetable garlands of 6 cm width.

For best results set the cutter on its foot and position it with one hand. Use the other hand to stick fruit and vegetable into the cone.

Start rotating.

An end holder helps to process the end pieces for minimum loss.

Hard plastic and stainless steel, 10 x 8,5 x 9 cm, cone Ø 7,5 cm, hardened stainless steel blade, dishwasher-safe.

WEIGHTS AND DIMENSIONS
Dimensions: 83.4mm x 48.5mm x 43.9mm (Front Mount Included)
Weight: 151g (Front Mount and Elastic Band Included)

ACCESSORIES INCLUDED
USB-C charging cable, Front Elastic Band

TECHNICAL SPECIFICATIONS.
LEDs: 2x primary white, 1x auxiliary white and 1x auxiliary red, all with a life cycle of 50,000 hours and an illumination range of more than 100°
Operating Modes: 4 light powers on primary light + 2 special modes; 2 light powers on secondary white light; 3 modes on red light
Powers and Durations Primary White: 1800 Lumens ( / ) -> 1300 Lumens (9h.) -> 400 Lumens (18h.) -> 150 Lumens (37h.) -> SOS -> Beacon
Powers and Durations Secondary White: 25 Lumens ( 66h. ) -> 8 Lumens (153h.)
Peak power: 6841 candelas
Maximum illumination distance: 175m.
Power and luminsa selection method: Two dedicated power, and light selection buttons
Body: plastic material with aluminum unibody front door
Battery: built-in, non-removable 3.6V, 6000mAh Li-Ion battery
Water resistance: as per IP68 standard
Impact resistance: withstands falls from 2m height
Notes: Equipped with integrated charging system via USB-C port - Separate remaining charge indicator - Proximity sensor that automatically switches light output if it detects nearby objects

Led: UHi 20 LEDs with a life cycle of 50,000 hours
Operating Modes: 2 light powers
Powers and Durations with NL1836R battery: 1800 Lumens (1.30h.) -> 300 Lumens (2 hrs 45) -> 50 Lumens (20h.)
Peak power: 67000 candles
Maximum lighting distance: 520m.
Power and light selection method: rubber back button
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: 1x 18650 NL1836R 3.7v rechargeable via USB-C port (included) or compatible with 2x CR123 disposable or rechargeable 3.0/3.7v batteries
Measurements: 117.5 mm (L) - 2.14 mm (D shaft) - 2.68cm (D head) - 2.44cm (D tail)
Weight: 64g. - battery excluded
Accessories included: wrist strap, clip, charging cable
Waterproofness: as per IPX-8 standard, submersible to 2m depth for 30min.
Impact resistance: withstands falls from 2m height

The Nitecore EMR30 SE is a compact and portable electronic mosquito repellent, suitable for both indoor and outdoor activities. Featuring a patented and highly efficient heating system and active diffusion system, the EMR30 SE uses readily available blue pyrethroid tablets, creating a pest-free comfort zone of up to 5 meters outdoors and 3 feet indoors in just five minutes. Its wind-resistant design and built-in fan ensure powerful and even diffusion of the repellent, even in breezy conditions.

Key Features:

Effective Repellent: Repels pests up to 5 meters away in just 5 minutes.
Wind-Resistant Design: Ensures greater efficiency even in windy conditions.
External Power: Provides extended outdoor use with an external USB-C power source.

Package Included:
Nitecore EMR30 SE
USB-C Charging Cable

USB-C External Power:
The EMR30 SE requires an external USB power source, making it an ideal companion for Nitecore power banks. Simply plug the power source into the USB-C port and hold the power button to activate the mosquito repellent system. A 10,000mAh power bank can provide up to 12 hours of mosquito repellent action. The EMR30 SE's intelligent circuitry ensures that the power bank works continuously while in use.

Safe and Reliable:

IPX5 Water Resistance: Safe to use in wet conditions.
Durable Construction: Molded polycarbonate body with 1 meter impact resistance.
Ideal for Various Activities: Perfect for hiking, camping, fishing and outdoor cooking.

Technical Specifications:

IP ​​Rating: IPX5
Impact Resistance: 1 meter
Input: 5V ~ 2A (10W MAX)
Heating Temperature: 165°C / 329°F (MAX)
Protection Zones: Outdoor: 5 meters | Indoor: 3 meters
Dimensions: L-6cm x W-6cm x H-5cm
Weight: 85 gr.

Small and compact. 
The small MINIMILL powerhouse adds flavor to your dishes. 
The CeraCut® high-performance ceramic grinder, odorless and tasteless, absolutely free of rust and wear, can be adjusted from coarse to fine like a large grinder, making it the world's smallest adjustable grinder!
The elegant combination of stainless steel and acrylic glass proves that even small things can have real greatness. By the way: thanks to its small size and weight, fine and noble spices can also be enjoyed freshly ground! 

- High-quality stainless steel and acrylic grinder
- With CeraCut® high-performance ceramic grinder
- Infinitely variable grinding level adjustment, compact size

Height: 6.2 cm

Diameter: 3.2 cm

ALSO AVAILABLE IN BLACK AND WHITE UPON REQUEST.

Extension hose for EPB series air compressors, an optional accessory, used to inflate the tires of bicycles, scooters, motorcycles and even cars that offers several utilities and advantages:

* Ease of inflation on different bicycles:
Bicycles have different types of valves (Presta, Schrader) and different wheel configurations. The flexible hose helps make the inflation operation more versatile and compatible with various situations.

* Less heating of ultralight inner tubes:
Some inner tubes, especially those with valves embedded in ultralight materials such as latex or polymers, can be more sensitive to heat generated by friction or direct pressure from the compressor. A hose helps dissipate heat better, reducing the risk of valve and inner tube overheating.

* Using the hose with a balloon needle:
Can be used with an adapter needle to inflate sports balls, such as footballs, basketballs, or volleyballs. Due to the hose's flexibility, excessive pressure is avoided on the balloon during inflation, reducing the risk of damaging the balloon's valve. The needle is easily attached to the end of the tube, and the system allows for controlled and safe inflation.

Microtech Socom knives are named after the US Special Operations Command, abbreviated to Socom; an operational command under the US Department of Defence Special Operations Command. Under its jurisdiction are some very famous units, such as the Navy SEALs, Air Force PJs, Army Rangers and others. A knife that borrows such a name must mean business, and the Microtech Socom series does just that! Thanks to high-quality materials that can withstand the rigours of the battlefield. Knives built to last.

The Microtech Signature Series is designed for customers looking for a more exclusive option than the already excellent standard models. Depending on the model, they are distinguished by the use of first-class materials and finishes: e.g. carbon fibre, copper, Damascus and DLC.

Intended use: Tactical / Sporting

Production type: Midtech
Country of manufacture: USA
Blade: Stainless steel M390 60-61HRC
Blade Finish: Dark Dual Tone, Black Dark Washed and Black DLC
Handle: Carbon Fibre
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 207mm.
Weight: 177g. (225g. scabbard included)
Sheath: Kydex Carbon Fibre, with steel clip
Packaging: cardboard box with Microtech USA logos
Notes: -

Designed by Microtech and manufactured by Rike Knife, the Socom Bravo Mini is a collaborative knife modeled after the classic Socom. This compact hand knife is an excellent heavy-duty tactical knife. It features a 6Al4V titanium handle reinforced with carbon fiber cheek pads. The lanyard hole and pocket clip allow for functional carry, and the ergonomics are among the best in the industry.

Intended Use: Tactical/Military

Production Type: Industrial
Country of Production: China
Blade: M390 stainless steel 60-61HRC
Blade Finish: Bead Blast
Handle: Titanium 6Al4V and Carbon Fiber
Blade Length: 87mm.
Blade thickness: 3.5mm.
Length closed: 110mm.
Total length: 196mm.
Thickness when closed: 14mm.
Weight: 95g.
Closure: Sub Frame Lock
Clip: titanium, removable (tip up)
Packaging: cardboard box with Microtech logos 
Notes: High-quality Asian production line that combines Microtech designs with the most modern materials

The Amphibian is a true Marfione classic dating back over 20 years. It comes from a bygone era when Microtech knives could be both automatic and manual...in one. Here we have the manual version that incorporates Tony's RAM-LOK design with a reversible pocket clip and two thumb studs for a fully ambidextrous knife that sacrifices nothing in any way. It features Bohler's proprietary M390MK steel, available only from Microtech Knives. The knife is similar to the MSI Microtech Standard in terms of size, but when it comes to style, there is no comparison. The Amphibian is one of the finest tactical knives ever, and we are happy to see it available again for the masses!

Intended Use: Tactical/Military

Type of manufacture: Midtech
Country of manufacture: USA
Blade: Stainless steel M390MK 60-61HRC
Blade Finish: Apocalyptic, Dual Tone
Handle: Aluminum Natural Clear
Blade Length: 105mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 235mm.
Thickness when closed: 17mm.
Weight: 180g.
Closure: Ram-Lok (Crossbar Lock / Axis Lock)
Clip: titanium machined from billet, removable and reversible
Packaging: cardboard box with Microtech USA logos
Notes: Design by Anthony Marfione

Key Features
* Uses a UHi 20 LED with an output of 900 lumens.
* Range of 255 meters and peak beam intensity of 16,000cd.
* Removable rechargeable battery with magnetic charging function for convenience and ease of use.
* Compact and lightweight recoil-proof design, ideal for carrying.
* Controllable via the dual button on the tail
* Constructed of aircraft aluminum alloy

Led:1x UHi20 with a life cycle of 50,000 hours
Operating Modes:Press and hold one of the power buttons to access momentary tactical power on, briefly press one of the power buttons to access constant power on.
Powers and Durations:900 lumens (35 min.) 
Peak power: 16000 candles
Maximum lighting distance: 255m.
Ignition method: double switch, ambidextrous, placed at the tail of the flashlight
Head: aircraft aluminum
Body: aircraft aluminum
Finish: anodized, Type III
Lens: ultra-clear hardened glass with anti-reflective treatment
Batteries: runs on a proprietary rechargeable Li-ion 3.7V / 500mAh / 1.85Wh battery
Measurements: 5.6cm (Length) - 3.3cm (Width) - 3.2cm (thickness, slide included)
Weight: 66g. with battery inserted
Accessories included: magnetic charging cable, sled retainer
Waterproofness: as per IPC6 standard
Impact resistance: withstands falls from 1m. height
Notes: quick universal attachment sled, compatible with Glock and Picatinny systems 

EXPECTED AVAILABILITY: May 20th

TECHNICAL DATA:
Led: 2x UHi20 with a life cycle of 50,000 hours
Brightness Levels: 5 light powers + STROBE
Powers and Durations: 3000 Lumens (N.D.) -> 1000 Lumens (1.30h. ) -> 200 Lumens (4.15h.) -> 65 Lumens (14h.) -> 15 Lumens (55h.)
Peak power: 22,500 candelas
Maximum lighting distance: 300m.
Body: aluminum alloy with HAIII hardened anodized finish
Battery: Built-in 1,700mAh Li-Ion type, equipped with built-in USB-C type charging system
Measurements: 13.6cm (Length) -3.14cm (Width,) - 2.14cm (Thickness)
Weight: 104g.
Accessories: wrist strap, USB charging cable
Waterproofness: as per IP54 standard, resists dust and light splashes of water
Impact resistance: withstands falls from 1m height
Notes: equipped with built-in charging system via USB-C port (cable included, power adapter not included

AdHoc - Garlic press with chopping board - ROCCAALIO 

Fresh garlic enhances many dishes and is very healthy.

For all fans of the big bulb, AdHoc now presents 'RoccaAlio', the new garlic press with cutting board. 

It crushes garlic effortlessly for uniform results and the best possible flavours, because here it is pressed, not crushed.

The 'GridCut' laser-cut stainless steel blade with a large working area achieves an efficient result.

The elegant 'RoccaAlio' designed by Robert Franzheld is practical and ergonomic to use; its handle made of high-quality acacia wood is comfortable to hold. In addition, the solid cutting board is made of robust, natural and food-friendly acacia wood: thanks to its antibacterial properties, the wood is particularly suitable for use with food.

The high-quality product is dishwasher-safe so that it can be used for multiple purposes related to delicious garlic-flavoured dishes.

Press instead of squeeze

Manageable and ergonomic to use

Because of its antibacterial properties, the wood is particularly suitable for food use

Not suitable for the dishwasher.

Salad lacking a little spice?

It's all right if the 'AromaPour' oil/vinegar dispenser is at hand.

At the table or in the kitchen, this new high-quality product from AdHoc offers the best olive oil, tasty pumpkin seed oil, fine vinegar and much more to taste.

Just lift, pour and put down with one hand: this dispenser is really practical to use!

The 'AromaPour' is made of absolutely tasteless borosilicate glass and combines four functions in one.

A non-drip spout directs the drops collected in the bottle through the centre of the dispenser, the integrated 'GravitySeal' ball-lock seals safely and cleanly, a stainless steel filter on the inside retains herbs, chillies etc. during pouring, and the special 'PreciseFlow' ventilation system ensures reliable and economical pouring and dosing.

Another advantage is that this premium dispenser has a large opening and is therefore easy to fill; its capacity is approx. 500ml.

All parts can be placed in the dishwasher for cleaning.

For the best olive oil, tasty pumpkin seed oil, the best vinegar and much more.

A good salt and pepper mill set is one of the most important items in your kitchen - there are not many meals where you don't use them. The beautiful design and practical nature of the TEXTURA salt and pepper mill set from Adhoc is understandably popular given the perfect grinding results that put it in a class of its own.

The reason for this is that the mills are made using odourless and tasteless CeraCut® high-performance ceramic grinding mechanisms that won't rust or wear. The grinding setting is infinitely adjustable, from very fine to beautifully coarse.

The TEXTURA salt and pepper mill provides perfect seasoning for every dish.

Details

Size (H x ø): 15 x 5 cm

Weight: 410 g

Material: Painted beech wood, stainless steel

Colour: dark green / light green wood colours

Features High-performance CeraCut® ceramic grinder that won’t rust or wear.

Continuous grinding adjustment from fine to coarse 30-year warranty* on the CeraCut® grinding mechanism

Included in delivery AdHoc TEXTURA Salt and Pepper Mill, Set of 2.

LED: 8x UHE LEDs with a life cycle of 50,000 hours
Outputs: 8x bright, digitally adjusted outputs and 3 signaling modes
Spot light powers and durations: 8 lumens (82h.) -> 40 lumens (40h.) -> 100 lumens (31h.) -> 400 lumens (14h.) -> 1300 lumens (5h.) -> 2000 lumens (2h.) -> Beacon -> SOS
Flood light powers and durations: 8 lumens (82h.) -> 40 lumens (40h.)
Powers and durations auxiliary red light: 5 lumens (66h.) -> 15 lumens (37h.) -> flashing at 15 lumens
Range: up to 222mt.
Peak power: 12293 candelas
Usable batteries: 1x Nitecore 1840HP 10A 3.6V (included in package), compatible with any 18650 Li-ion with at least 8A discharge capacity
Flashlight dimensions: 89.5x42.2x46 mm. 
Weight: 152g (with battery, mounting bracket and elastic band)
Lens: optical matrix
Body: aircraft aluminum
Finish: anodized, Type III
Strap: elastic, breathable, adjustable in diameter

Original Nitecore remote switch to be used by replacing the tail cap of your flashlight; ideal for use with the flashlight mounted under a firearm for hunting, tactical, or airsoft purposes.

Once installed, it allows for temporary activation of the light by pressing the dedicated rubber remote pad; the light will turn off as soon as pressure on the pad is released. Additionally, it also integrates a standard power button on the side for normal flashlight use.

Compatible only with models:

MH12 PRO - MH25 PRO

The Nitecore GM02 Pro is made of aerospace aluminum alloy with HA III military-grade hard-anodized finish for high durability.

A large stainless steel thumb nut allows for adjustment and ensures stable mounting on a Picatinny rail.

It can accommodate flashlights with a body diameter from 25.8mm to 26.5mm and fits models like

Nitecore SRT7 SRT7i, SRT6i, MH12 Pro, and MH25 Pro.

Dimensions L-4.83 cm x W-4.29 cm x H-4.29 cm

Weight 68 grams

Expected availability in Italy: February 24

Nitecore's EDC35 flashlight boasts impressive brightness and range, making it an ideal choice for everyday use. Equipped with the innovative NiteLab UHi 40 MAX LED, the EDC35 offers an output of 5000 lumens and an impressive range of 601 yards (549.91 meters).

USB-C Rechargeable The EDC35 offers the convenience of USB-C rechargeability. Simply twist the USB-C cover on the back to access the built-in charging port. A power indicator is included to alert you when charging is complete. Thanks to its built-in 6000mAh battery, the EDC35 can provide up to 90 hours of continuous use in low mode when fully charged and can be fully recharged in just 3.5 hours. The EDC35 also has two lockout modes: Partial and Full. You can still access Search and Lumin Shield modes in Partial Lock Mode, while Full Lock will completely prevent any accidental activation.

Compact and Durable With a compact size of 4.89 inches (12.42 cm) and weighing just 6.28 ounces (178.02 g) with the clip attached, the EDC35 easily fits into any pocket. It is also IP68 waterproof, has an impact resistance of 2 meters.

TECHNICAL SPECIFICATIONS

- LED: NiteLab UHi 40 MAX LED
- Maximum brightness: 5000 lumens
- Maximum Beam Distance: 601 yards (549.91 meters)
- Peak Beam Intensity: 62500 cd
- IP Rating: IP68
- Impact resistance: 2 m
- Dimensions: Length: 4.89" (12.42 cm)
- Head Diameter: 1.25" (3.18 cm)
- Tube Diameter: 1.02" (2.59 cm)
- Weight: 6.28 oz (178.02 g)

BRIGHTNESS OUTPUT

- Lumin Shield (Diffuse Light): 5000 lumens ~
- Search (Headlight): 3000 lumens ~
- High: 1300 lumens 4 hours 45 mins
- Medium: 300 lumens 9 hours 15 mins
- Low: 70 lumens 40 hours
- Ultralow: 5 lumens 90 hours

Fully press the rear switch to turn the light on or off. While the light is on, do a half-press to cycle through four different brightness levels. For momentary modes, half press and hold to activate the 3000 lumen searchlight, or full press and hold to activate full 5000 lumen output. The EDC35 also includes a sensor protection feature that reduces the EDC35's brightness when it is too close to objects to prevent overheating.

BATTERY FEATURES
* Rechargeable Li-Ion 18650 cylindrical battery.
* Rated voltage: 3.6V
* Capacity: 4000mAh - 14.4Wh
* Positive Pole: Protruding
* PCB protection circuit for internal voltage protection.
* PCB protection prevents undervoltage at 2.5V and overvoltage at 4.25V

BATTERY PRECAUTIONS
* Do not leave batteries unattended during charging.
* Do not charge over carpets, wooden tables or flammable materials
* We are not responsible for damage resulting from tampering with the batteries.
* We are not responsible for incorrect use or reversed polarity of batteries

BATTERY TECHNICAL SPECIFICATIONS
* Capacity: 4000mAh nominal
* Dimensions: 18.6+/-0.3mm diameter x 69.8+/- 0.3mm height
* Approximate weight: 50g
* Average rated voltage: 3.6V
* Peak voltage: 4.2V
* Power: 14.4 Wh (watts per hour)
* Life cycles: > over 500 cycles

NITECORE has launched the revolutionary NW5000, expanding its line of lightweight electronic products. This Magnetic Wireless Power Bank in Carbon Fiber opens a new dimension in aesthetic design and functionality. Inspired by the iconic Lamborghini Sesto Elemento, the NW5000 boasts a unique forged carbon fiber shell, offering a perfect blend of style and advanced technology.

Designed to be durable, it features a matte finish resistant to fingerprints, corrosion, and wear, with IPX5 water resistance, making it ideal for technology enthusiasts and outdoor activity lovers.

This versatile power bank supports Qi wireless charging up to 15W and wired QC/PD charging up to 20W, compatible with a wide range of smartphones. The 5,000mAh battery is housed in a slim 120-gram chassis measuring just 10.6mm (0.42") thick, offering portability without compromising power.

The NW5000 automatically starts charging upon magnetic attachment with a device and can be connected for charging even when it enters hibernation mode. Its magnetic strength reaches 10N, ensuring a stable charging connection even with phone cases.

Designed with travel in mind, the NW5000 meets the latest safety standard (GB/T35590-2017) and is suitable for use on airplanes. Rigorously tested for reliability and safety.

Key Features:

Dimensions: 65 x 105 x 11.5 mm
Capacity: 5,000mAh 3.85V (19.25Wh)
Nominal Energy: 3,000mAh 5V (TIP 1A)
Input: USB-C: 5V⎓2.4A / 9V⎓2A / 12V⎓1.5A
Output: USB-C: 5V⎓2.4A / 9V⎓2.22A / 12V⎓1.67A
Wireless: 5W / 7.5W / 10W / 15W
Weight: 120g
Waterproof: IPX5

The Nitecore EDC33 is a high-performance Every Day Carry (EDC) flashlight, ideal for daily use due to its outstanding brightness and projection distance. Equipped with the innovative NiteLab UHi 20 MAX LED, it provides a powerful 4000-lumen light output and an impressive range of about 450 meters.

Key Features:
Maximum Brightness: 4000 lumens with a range of approximately 450 meters.
Brightness Modes: Four brightness levels, plus search and Lumin Shield modes.
Easy-to-Use Rear Switch: One-click on/off; mode change with a half-click.
Hidden USB-C Charging: Built-in charging port, easily accessible.
Lockout Functions: Total and partial lockout to prevent accidental activations.
Included Accessories: Wrist lanyard, USB-C charging cable, clip.
High-Performance EDC:

Ideal for everyday carry, the EDC33 ensures a high-intensity beam, controllable through the rear switch. You can select and memorize the desired brightness level, which will remain set even after turning off the flashlight. The 1700-lumen search modes and the maximum power of 4000 lumens are easily activated.

USB-C Rechargeable:

With the convenience of USB-C rechargeability, the EDC33 can be fully charged in just 2 hours and offers up to 63 hours of continuous use in the lowest mode. It includes a power indicator to monitor the charging status.

Compact and Durable:

The EDC33 is only 11.56 cm long and weighs 127 grams (with clip), making it easily pocketable. Waterproof according to IP68 standards and shock-resistant up to 2 meters, it is designed to ensure reliability in any environment.

TECHNICAL DATA:

TECHNICAL SPECIFICATIONS

LED: UHi 20 MAX LED
Maximum Brightness: 4000 lumens
Peak Beam Distance: 449.59 meters
Peak Beam Intensity: 40505 cd
IP Rating: IP68
Impact Resistance: 2 meters

Dimensions:
Length: 11.56 centimeters (4.55 inches)
Head Diameter: 2.54 centimeters (1.00 inch)
Tube Diameter: 2.39 centimeters (0.94 inch)
Weight (with clip): 127.01 grams (4.48 ounces)

BRIGHTNESS OUTPUTS

MODE | OUTPUT | RUNTIME
Lumin Shield (Floodlight): 4000 lumens | ~
Search (Spotlight): 1700 lumens | ~
High: 1200 lumens | 2 hours and 31 minutes
Mid: 300 lumens | 6 hours and 58 minutes
Low: 70 lumens | 31 hours
Ultralow: 5 lumens | 63 hours

Accessories: Wrist lanyard, clip, USB charging cable

For a detailed analysis of this product's features, read the in-depth review on our blog.

WINE AND CHAMPAGNE COOLER WINE

Nothing beats a good glass of wine with nice people and good conversation. It's just a pity that the matching delicious grape juices then always get far too warm so quickly! This is where we need the "Vine" wine, sparkling wine and champagne cooler from AdHoc. It keeps pre-cooled wine or sparkling wine at serving and drinking temperature for around two to three hours - giving us more time and leisure to enjoy fine wines.

The "Vine" works with NaturalChill, which means long-lasting cooling thanks to the natural insulating properties of wood and the outstanding cooling performance of stainless steel.

With its elegant material mix of high-quality acacia wood and brushed stainless steel designed by Robert Franzheld, the "Vine" cooler fits into any ambience. It is suitable for standard bottles up to 10.5 cm in diameter and also for cooling bottles of water or other drinks.

Vine collection

Material Acacia wood and stainless steel

Design: Robert Franzheld

Colour natural

Height 19.5 cm

Diameter 13.5 cm.